Just found the channel and I'm digging it! Great camera quality and love the car!

Keep up the progress gangy love the video

That's what's up. 916 checking in.

hard asf bro i’m looking into this kit fosho

What crankcase filter do you have on the drivers side?

I haven’t watched it yet but I’m hoping you go over piston ring gapping

Oil pump gears really not needed as so many claim. Ford GT350 and GT500 don't use billet gears. Many go on and on but never really explain how and why. Using 2 step limiter caused a lot of problems and shock loading

Thats my dream car

Just ordered a G2 kit with upgraded intercooler! I’m only looking for 700hp max I want to play it safe. Upgrading the OPG’s and crank sprocket as well

@timothy.crabajales9869

Жыл бұрын

add more you know you want too...

@jbrockway5.0

10 ай бұрын

With the opg’s and crank sprocket you can handle upwards of 800-900whp maybe even 1000 if you have a good fuel setup.

@defi5

10 ай бұрын

@@timothy.crabajales9869 I’m at 740 whp now lol

@defi5

10 ай бұрын

@@jbrockway5.0 you can make it on stock OPG just can’t hit the limiter very risky imo tho but people are doing it

@aoelor6857

Ай бұрын

@@jbrockway5.0 what do you think the safe limits are on stock OPG/CS unopened motor? So essentially as stock as you get with the exception of fuel and boost? I’m not looking to make crazy power but I figured I’d probably have to do OPGs anyways if I’m adding boost (2015 GT MT82 50k miles)

The PCV system bypasses your MAF on the drivers side then flows into your intake on the passenger side. Thats an unmetered air leak.

I’ve run a bap with my dw400 with 1050 injectors and I haven’t had an issue with fueling at all.

@ZAYWITDAFITTY

4 ай бұрын

I had problems with I ran the DW400 on its own with upgraded I ejctors. Once I added a BAP all problems went away

Im not a fan if the ricer bov noises though. Thought bov's were a turbo thing.

I use to run those injectors and got rid of them. I installed FIC1000 and now my car runs amazing. I would also look into wengerd performance for tuning. He is amazing also

@KINGKJ2REAL

2 жыл бұрын

I have no issues with them. Been a year straight on e85 800 wheel And i bought them used…

@johnhamrick88

2 жыл бұрын

Im n/a on e85 and Wengerd tuned my car and i love it..👍

@slowpok_5.067

2 жыл бұрын

@@johnhamrick88 he is the man when it comes to tuning a mustang.

@ZAYWITDAFITTY

Жыл бұрын

Just saw your comment, car is running fine now. Apparently the DW400 was just not keeping up with the car. Added a BAP and it’s solid!

@JR-us1ne

Жыл бұрын

​@ZAYWITDAFITTY thought you said in tge video pretty harshly you didnt need a BAP lol

I dont know if i missed it but what bov are you running? Also keep the videos coming bro!

@ZAYWITDAFITTY

2 жыл бұрын

My bad I don’t think I touched on it, overall the car runs great! Even at WOT when it’s dropping fuel pressure it’s still moving. Once the BAP comes in I will make an update video!

Do you know if the vmp plug and play with fit on my 2022 stang

@ZAYWITDAFITTY

Жыл бұрын

It should bro still the same car

I’m confused so the ess g2 kit includes the supercharger or its just the supporting mods for the supercharger? Price seems to good to be true lol

@ZAYWITDAFITTY

2 ай бұрын

The g2 kit comes with everything needed. That’s why ESS is one of the hottest superchargers for the coyotes. The bang for your buck is unmatched.

Do you know if this kit is carb legal, and did you have any issues getting it shipped to california'

@MrJaxco

Жыл бұрын

No carb number

Have you sold cobra jet yet? If not let me know how to contact you

Hope its CA carb legal if u live in sac and plan on keeping the car long enuff for it to have to be inspected. CA sucks for mods :/ I may go with whipple for my shelby since they have a carb legal kit

@ZAYWITDAFITTY

Жыл бұрын

Man we are going to find out what happens when that day comes 🥹 I’ve also learned that if you’re not driving around like an asshole you may slip through the cracks! Also this isn’t my daily so I’ve been lucky so far! Whipple wouldn’t be a bad choice!

Shawn at AED is the best

How long is it taking everyone to get it. Been a week and still showing awaiting shipment

@ZAYWITDAFITTY

2 жыл бұрын

Took mine about 3 weeks, when I was waiting for mine they were finishing some of the intercoolers

Can someone explain to me what a “BAP” is? I’ve got a 21 GT Convertible and am trying to make 700-750 WHP. Looking at the G3 kit with the 110mm pulley, do I need a new pump or just a pump booster? I don’t want to spend like 800 bucks on injectors either lol

@ZAYWITDAFITTY

5 ай бұрын

A BAP is a “Boost A Pump”. So pretty much it gives your stock fuel pump a boost of energy to move more fuel. The stock injectors won’t be enough for 7-750WHP unfortunately. You will need E85 to run the 110mm pulley. Depending on the fuel you use 91/93 won’t be enough octane for 7-750WHP safely. I do see people run a mix of E30 or so with a BAP and upgraded injectors. That is up to your tuner, my tuner “Lund” isn’t a fan of that. I’ve been on the 125mm pulley with my G3 for almost 2 years now. It’s plenty for the everyday Joe, unless you go up ahead a highly modified car. If you have any questions feel free to reply here. I also have an IG @issa.fitty

@ZAYWITDAFITTY

5 ай бұрын

I just got a fuel system and installing that soon, I just uploaded a video on that as well.

What size 0f wheels and brand re those size of tires

@ZAYWITDAFITTY

Жыл бұрын

Fronts are Ferrada FR8 20x10 275/35/20 Rears are Weld S77 17x10 305/45/17

Is that the standard gear set or the quiet gear set?

@ZAYWITDAFITTY

Жыл бұрын

This is the standard/quiet gear. You can hear it no problem

I decided to switch my fuel pump to DW400 but mannnn I have the same issues I get P008A code only when I do wot pull the code comes on. I only got cobra jet set up but I’m hoping to go boosted later on. Witch is why I switch it. But damm it’s been a headache lol

@ZAYWITDAFITTY

2 жыл бұрын

Bro I feel your frustration, just get a BAP and call it a day!

@juanguerrero243

2 жыл бұрын

Can you post a link to see where I can buy one?

@ZAYWITDAFITTY

2 жыл бұрын

@@juanguerrero243 just added it to the link in bio, I went with VMP plug and play but I hear JMS is really good too they also have a plug and play option

@juanguerrero243

2 жыл бұрын

@@ZAYWITDAFITTY maannnn right on. I was dam near racing it and driving it like that with the code on. I was like yolo fuck it 😂😂

im praying you respond to this but do i need 8 or 16 of the injectors. i have a 2019 gt

@ZAYWITDAFITTY

2 жыл бұрын

Only 8, the other injectors are for the direct injection no need to mess with them.

@eliteghost0001

2 жыл бұрын

@@ZAYWITDAFITTY thank you so much man ❤️

Loveland Ford left the heater hoses touching my fuel rails

Did you upgrade your oil pump gears ?

@ZAYWITDAFITTY

Жыл бұрын

No, my mechanic said he hasn’t seen man OPG failures on the Gen 3s. Plus I’m not redlining it to the moon. Eventually I will thoug

What silver wheels are those?

@ZAYWITDAFITTY

Жыл бұрын

FERRADA FR8

Did you keep the dw400 and added the BAP? Or did you put in your old pump ?

@ZAYWITDAFITTY

2 жыл бұрын

Exactly what I did, if I could do it over again I would leave the stock pump with BAP!

@SIK50H

2 жыл бұрын

@@ZAYWITDAFITTY good to know ! I have a gen 2 and I’m thinking about grabbing this kit so I’m trying to soak up everything I will need lol

@ZAYWITDAFITTY

2 жыл бұрын

@@SIK50H yes sir Gen 2s will be able to run a bit more boost compared to the Gen 3 on lower octane because of the compression ratio

@ZAYWITDAFITTY

2 жыл бұрын

@@SIK50H watch all my videos and if you have any questions ask me I can also make videos about it!

@SIK50H

2 жыл бұрын

@@ZAYWITDAFITTY you tuned on 91 ? Here in Houston we got 93

What psi pully did you go with?

@ZAYWITDAFITTY

2 жыл бұрын

I did the 8.5 pulley but it’s too much for 91, so I ordered the 6.5psi pulley that’s on its way

@krispynoodlez7728

2 жыл бұрын

@@ZAYWITDAFITTY Damn, I bet she rips though

Hey bro I'm at sac too!! I'm intrigued with your car bro I've been wanting to boost my mustang. You wanna meet up so I can ask questions and check out your car?

@ZAYWITDAFITTY

2 жыл бұрын

Of course man we will figure something out! Thanks for watching!

What oil do you go with boss?

@ZAYWITDAFITTY

3 ай бұрын

5w50 motorcraft! That’s what they use for the gt500s

Who is your tuner

@Magnetic5oh

Жыл бұрын

Lund ftw

Did you go with the straight cut or helical gears?

@ZAYWITDAFITTY

2 жыл бұрын

I believe the helical, I didn’t even choose which gears I got with the kit. Still has a great sound!

@jesseyoung7959

2 жыл бұрын

I’ve been looking into this kit also. Is the whine pretty loud? Idle and under load?

@ZAYWITDAFITTY

2 жыл бұрын

@@jesseyoung7959 the whine is loud, definitely tame compared to some other vortech sand Paxton set ups. If you want it even louder mention the straight cut gears and that will get you even more whine

@jesseyoung7959

2 жыл бұрын

@@ZAYWITDAFITTY so even the helical are fairly loud then. I’m just afraid that if I were to go the straight cut It’d be too much lol

@ZAYWITDAFITTY

2 жыл бұрын

@@jesseyoung7959 exactly I think the helical is enough for me where it’s tasteful but not too much, I should be dropping a video tonight or tomorrow and I have more footage of the blower at idle

Peasant Setup

@nuclearpenguin3046

3 ай бұрын

When you cant afford a whipple would be a better title for this.

@CopeMustDie

2 ай бұрын

@@nuclearpenguin3046it’s better than whipple though ..

@nuclearpenguin3046

2 ай бұрын

@@CopeMustDie Is It Jace?

@CopeMustDie

2 ай бұрын

@@nuclearpenguin3046 Yes. $5k can put you in the 800whp+ range with ESS G2/G3 vs whipple at $10k. In ESS G3X you can get up to 1100whp still at $5500

What was the cost to install it? Looking into getting this kit by the end of the year

@ZAYWITDAFITTY

Жыл бұрын

Install cost me time, I did it myself with help from friends. But I would assume a shop will charge 1k-3k for install. Honestly bro if you have a weekend just hang it out yourself.

@ZAYWITDAFITTY

Жыл бұрын

I also have a video of myself installing it. Also Alejandro Flores made an in depth install video.

@Adrian5oh

Жыл бұрын

@@ZAYWITDAFITTY yea I’m Lund tuned as well I watch his vids just don’t have the proper tools for it lol

@JR-us1ne

Жыл бұрын

​@@Adrian5oh would be cheaper to get tools js

@Adrian5oh

Жыл бұрын

@@JR-us1ne I don’t have the knowledge to install something like that I wouldn’t even want to try it and mess something up lol I’ve done minor things but not this plus the blowers installed now 👍🏻 I got a Paxton blower

How much roughly do you have in this build car included? Isn't it around low end 45-60k.

@ZAYWITDAFITTY

Жыл бұрын

Just saw this, honestly I haven’t added it up I would say mid 50s

@sysdjdhdhkvsuhvskj

Жыл бұрын

Without the car how much is the build

wouldn’t this be turbocharged and not supercharged ?

@ZAYWITDAFITTY

Ай бұрын

It’s supercharged because it’s belt driven, turbos are powered by the exhaust

Those wheels?? 🔥🔥 Velgen?

@ZAYWITDAFITTY

Жыл бұрын

Ferrada FR8!

Lund good to go

You haven’t done anything to the transmission?

@ZAYWITDAFITTY

7 ай бұрын

Not yet bro still holding up. I can make an update video. I also have something new I’m adding to the car soon

@eladio5.0

7 ай бұрын

@@ZAYWITDAFITTY you sir earn a subscriber. I’m planning to go centrifugal on my 5.0 as well and I can’t wait to see your videos so I can take notes so I know what I’m doing

@ZAYWITDAFITTY

7 ай бұрын

@@eladio5.0 give me some ideas bro, happy to post more videos

Nice! You joined our FB page right?

@ZAYWITDAFITTY

2 жыл бұрын

What’s the page?

@nick5pointoh565

2 жыл бұрын

@@ZAYWITDAFITTY (ESS superchargers for mustang coustomers)

@nick5pointoh565

2 жыл бұрын

@@ZAYWITDAFITTY you’d be a lot of help for people like me with questions on the kit and your videos help out a lot I’m ready to see what the car does when you get the BAP in

@ZAYWITDAFITTY

2 жыл бұрын

@@nick5pointoh565 just joined, yeah once I get it in I will film it and see how it does!

@nick5pointoh565

2 жыл бұрын

@@ZAYWITDAFITTY sounds good I need to upload and change my name I no longer have a Camaro lol

Whp?? 700 or so??

@ZAYWITDAFITTY

7 ай бұрын

Haven’t put it on a dyno. I’m guessing around 650 wheel, it’s still on 91. Got an update coming soon!

tired of being n/a

i wonder how it would be on a stock pump with a bap

@ZAYWITDAFITTY

2 жыл бұрын

It would work just fine a lot of people go that route, kind of wish I just went that route.

@charleshenson4183

2 жыл бұрын

That's the route I'm going

@Oliver-ft2fq

Жыл бұрын

@@ZAYWITDAFITTY have you had any issues so far or can the coyote stock internals handle that boost kit reliably?

@ZAYWITDAFITTY

Жыл бұрын

@@Oliver-ft2fq it’s loving it man! Dropping another video soon took it testing at the track again!

@Oliver-ft2fq

Жыл бұрын

@@ZAYWITDAFITTY good to hear. What’s the smallest pulley and psi you think a stock coyote would run safely for the g3 kit?

Peasant setup lol

Car sounds weak. Must have a x-pipe on it. H-pipe for the beef.

Damn no fly by clips or WOT im unsubbing

@ZAYWITDAFITTY

2 жыл бұрын

Stay tuned 😂 can’t give it up all on one video

Hey I’m local to Sacramento myself! How the hell did you get this kit sent to Sacramento ha ha! Really like to know, I messaged you in your dm on ig. But serious about getting this done let a brotha know! Nice build by the way. Probably do the g2 myself. But let me know. Would like to meet up and discuss, got a 2020 gt btw.

What's your name, come again?