Have you liked this video 🎉? ❤

Looks well smart so far 👌

@Heatking

6 ай бұрын

Thank you Kel! 🫶🏽

Brilliant, and so so neat. 😊

@Heatking

7 ай бұрын

Thanks Paul. Could have been neater but I’ll take the compliment haha

House bash used to be 2 days for me completed. Retired now so easy life watching you young one's

@Heatking

7 ай бұрын

Ha ha, I can’t wait for them days. Although I don’t feel very young now.

Nice work 👍 good to have a change

@Heatking

7 ай бұрын

Thank you Derek 🥰🥰

Done a good job. 👍

@Heatking

7 ай бұрын

Thank you buddy 🫶🏽

Great video and a nice change from the run of the mill stuff you do. Nice to see a big job and talking through it, good work!!

@Heatking

7 ай бұрын

Thanks Simon, glad you enjoyed it. Don’t worry i won’t be making this a habit 😂😂😂

Nicely done Dan. Quite a formidable job for one guy.

@Heatking

7 ай бұрын

Thank you mate. 🫶🏽

Great job but you might want to double check the regs for joist notching!

@Heatking

6 ай бұрын

I didn’t notch any joists. Just drilled holes in the centre of them I think on this one. If that’s what you mean mate, the gas pipe at the start in the notch. Was a notch already there, think I said that in the video. 😀. Thanks for the support though.

Great start Dan nice and tidy - nothing wrong in taking a bit more time on a job, getting it right first time! 😊

@Heatking

7 ай бұрын

Cheers Trev! Just thought I seemed to get nothing done haha!

Great video mate. Brilliant content

@Heatking

7 ай бұрын

Thank you mate! Much appreciated 🫶🏽

This was new and refreshing. Can’t wait for you to complete this project. Also my man seem to have a fresh hair cut 😊 Thank Dan for another video

@Heatking

7 ай бұрын

Haha it’s grown again since this :( 😂😂 cheers for the kind words and glad you enjoyed it!

Thanks for the reply. That’s fair enough, keep coming across really bad notching. Good to let people know it’s existing if it’s not right👍🏻

@Heatking

6 ай бұрын

Anytime mate. I try to not notch incorrectly but I definitely have done in the past 😂😂

Fantastic vid dan, good to see you on big project 🎉

@Heatking

7 ай бұрын

Cheers mate. Was good to not be driving around all day too 😂😂

Dan this is superb work. Love the neat finish.

@Heatking

6 ай бұрын

Thanks so much buddy 🫶🏽

More great content like you say bit of change from the normal work. Good to mix it up a bit. Thanks for taking time to film. All the best Pete

@Heatking

7 ай бұрын

Thanks Pete, yeh it’s good to mix it up from time to time, I do worry sometimes that the viewers won’t like change though haha

Nice tidy work as usual Dan...

@Heatking

7 ай бұрын

Thanks Shaun. Cheers for the kind words!

The lovely chime of a Makita battery charger 😵‍💫😮‍💨🙄. Cracking vid as always Mr Makita 👌👈

@Heatking

7 ай бұрын

Haha you know it! Although it wasn’t my charger on this job 😀 cheers buddy 🙏🏽

Thank you Dan for another video upload

@Heatking

7 ай бұрын

You’re more than welcome, thanks for taking the time to watch :)

Thanks for uploading. Thanks for mixing it up.

@Heatking

7 ай бұрын

Thank you. Glad you enjoyed it!

Them jobs are an absolute pleasure to work on it’s well worth the extra few days for the peace and quiet with a radio, 👍👍🤜

@Heatking

7 ай бұрын

Yeh you’re right about that Tony. But unfortunately when filming I need to Keep turning the radio off haha!

Hat off to you buddy. Always great to do new stuff but this is quite a task right! You'll no doubt get it done though. We'll done so far.

@Heatking

7 ай бұрын

Thanks Simon 🙏🏽 I’ve not been back yet so might be a while before you see an update 😂😂😂

Gave your vids a couple of goes, interesting so I subbed,

@Heatking

6 ай бұрын

Thank you very much Raymond! Really appreciate that mate!

Every time I see you use the press gun I keep thinking I need one, looks loads easier 😂 good work mate 👍

@Heatking

7 ай бұрын

Cheers mate. I do love it to be fair but it’s a big investment 🙏🏽

@DannJ1

7 ай бұрын

It’s worth it bud, I was always against it. But now it’s used all the time.🎉

Hey no problem buddy. Back to a couple of services to get over it huh. Hope you are getting ac bit of money from it as it’s family. Look forward to watching the next episode.

@Heatking

7 ай бұрын

Cheers Simon, and yeh not the normal day rate but you know how it is 😂😂😂

Different but gorgeous ❤

@Heatking

7 ай бұрын

Thank you Lee 🥰🥰🥰

That is a long ass gas run

@Heatking

6 ай бұрын

You’re not joking! Hope the pressure etc is ok at the end of this 😂

🤘😎🤘

@Heatking

7 ай бұрын

Cheers Wayne 🥰🥰🥰

Thanks

@Heatking

7 ай бұрын

You didn’t need to do that Alex! But thank you sooo much 🥰🥰

@AlexRocks24-7

7 ай бұрын

@@Heatking have a Starbucks on me 🤓 Thanks for taking time for making these videos.

@Heatking

7 ай бұрын

@@AlexRocks24-7 you’re a legend thank you 🙏🏽🙏🏽

@AlexRocks24-7

7 ай бұрын

@@Heatking hopefully everyone would do the same and this time next year we be millionaires 😁

@Heatking

7 ай бұрын

@@AlexRocks24-7 😂😂😂😂 this time next year Rodney

Great video mate. Trust me stopping to think about a job and taking longer is never a bad thing…. I try to just slow things down and think about it sometimes when I’m on jobs. It helps with a better job overall! 🙏👍

@Heatking

7 ай бұрын

Great advice Marc. Thank you for your comment 🙏🏽

The gas pipe in the stud wall should be surrounded tightly with battens and left open top and bottom. It was difficult to tell from the video but the 22mm gas pipe down the brick wall needed to be chased in slightly (at least half in from experience)the guys dot and dabbing will go nuts. Sorry if I seem to be criticising, there’s maybe something I’m missing. Enjoying your videos mate keep it up 👍

@Heatking

7 ай бұрын

Yeah not sure I’ll get a batten down the left hand side. But will be left open top and bottom because of the ceiling void and kitchen units. Thankfully. My cousins boarding it so hopefully I won’t be in to much bother 😂😂

@Brian77766

7 ай бұрын

I'd worry about hidden gas pipes. I'd rather them exposed if they are going up a wall that may get things hung/nailed on it. At least then you/the owner know where they are.

@Heatking

7 ай бұрын

@@Brian77766 that’s true. The owner is taking pictures like a timeline so hopefully everything documented for future owners 🙏🏽

Dan you can fit the magna cleanse at an angle so the valves align its that way for a standard kitchen cupboard height setup I think , it’s what the tiny spanner is perfect at

@Heatking

7 ай бұрын

Yeh I said that to my cousin (owner) and he didn’t want it on an angle. 🤦🏽‍♂️ to be fair, neither would I. But thanks for the advice buddy 🫶🏽

@stephenfanthorpe2708

7 ай бұрын

@@Heatking I bet it’s the old straight lines ocd kicking in , good content as always m8

@Heatking

7 ай бұрын

@@stephenfanthorpe2708 cheers matey 🫶🏽🫶🏽

@Brian77766

7 ай бұрын

Magana clean 2 is best with the inline pipes.

@Heatking

7 ай бұрын

@@Brian77766 100%

@01:20 Oi! I've marked the floorboard. "Gas pipe run below. Do not screw, eedjuts!" 28mm copper been in garage 10 years. Kerching! How easy is it gonna be to balance the plinth heater, given that it's so close to the boiler and far away from rads?

@Heatking

7 ай бұрын

Shouldn’t be an issue balancing it really. Just crank on the valves down… he says hoping haha!

Brilliant video. Was there any reasoning behind the gas going from 22 to 28 then back down, or just to get rid of the copper? 🤣

@Heatking

7 ай бұрын

Get rid of copper was one reason, also just to increase volume of gas in the pipe with it being such a long run, you think about it, we come off the 22mm meter union before going to 28mm everytime too :)

Didn't realise you had a comfort zone pal

@Heatking

7 ай бұрын

😂😂😂 I was wishing I was servicing a boiler on this day 😂

I had a couple of those kind of jobs lately and it’s what I prefer doing but trying to do it in winter with cold people ringing everyday expecting you to drop everything and get round to them is a f£&king nightmare🤯🤯 I still got to Finnish one to get paid🤷‍♂️😔

@Heatking

7 ай бұрын

Yeh that’s the problem I found with this. The phone doesn’t stop but we have our time taken up by being stuck on a big job!

@dombarnes7092

7 ай бұрын

@@Heatking then leaving early for someone who’s adamant their heatings not working to find someone forgot they had a room stat to turn up that they’ve had for 30 years🙄😂😂

@Heatking

7 ай бұрын

@@dombarnes7092 I had one today. You need to come out my boilers on fire, it’s smoking outside… 🤦🏽‍♂️😂

@dombarnes7092

7 ай бұрын

@@Heatking😂😂😂

No mini-expansion vessel and scale reducer?

@Heatking

7 ай бұрын

Going to put mini expansion vessel under the sink, and the area that we are from doesn’t require scale reducesrs

@Exgasman9072

7 ай бұрын

👍

@Heatking

7 ай бұрын

@@Exgasman9072 because under the boiler will be a work out space I didn’t want to clutter up too much directly under it, 🙏🏽

Where your tape measure from

@Heatking

7 ай бұрын

Haha TikTok shop 😂😂😂

Never seen a plaster yet dot and dab over 22mm, should have been chase in buddy, sleeping through walls now should be in metal not plastic, sorry to come over as nit picking

@Heatking

7 ай бұрын

Cheers Paul. Appreciate that, how do they get around it with the plastic sleeve from the meter box? The bit gas pipe from the meter where it’s against the wall is getting stud out and insulated, show people more when I go back :)

@andrewsmith6882

7 ай бұрын

​@@Heatkingo

@andrewhayes4914

7 ай бұрын

@paulsmith2931 has a point about the sleeve it should not be in plastic or even metal from the meter box it should be a sleeve with a flange on it that can be screwed to the back of the meter box they come with the meter box they are not plastic or metal they are made from the same material as the box, using anything other than that sleeve is wrong I don't want to sound like I'm having a go but I see lots.wrong here

@Heatking

7 ай бұрын

@@andrewhayes4914 it was the sleeve from the meter box with the flange I used. Assumed it was plastic sorry. What else do you see wrong Andrew?

First !

@Heatking

7 ай бұрын

🎉🎉🎉❤❤

Get some walraven RSWB's instead of noggins

@Heatking

7 ай бұрын

Down to price mate 🙏🏽

@paul_my_plumbs_uk

7 ай бұрын

@@Heatking down to London 😂😂😂 up ya game and prices 👊🏾👊🏾👊🏾👊🏾 booyaka

@Heatking

7 ай бұрын

@@paul_my_plumbs_uk haha this was for family 🥰

where did my comment go ??? I see lots not quite write PEB is not to tech bulletin 102 earth in the same sleeve as the gas pipe not preferred route, gas pipe to meter in stud/counter battened wall needs to be ducted and metal plated, the gas pipe doesn't look like you double wrapped it in yellow gas tape, the notch isn't 10% 0f the span of the joist width, gas pipes should not be run in mineral wool insulated walls ceilings if it was to ever leak the gas holds in the fibbers and well you can guess the rest !

@Heatking

7 ай бұрын

To be fair. The Earth bonding route, I just pushed through the gas pipe hole, the stud wall for the gas pipe to meter isn’t up yet so can sort the battens etc.. and the notch I used. Was an existing one, I’m not going to cut more notches out further down the joist when there’s already one cut there. The mineral wool in the walls/ceiling, i don’t recall seeing any but I could be wrong. 🫶🏽🫶🏽

Great video Dan 👌 I'm the same I flip flop between commercial and domestic and I always find getting back into the house bashing that I'm slower compared to the other lads but at the end of the day once its done right and no leaks I'm nor bothered 🫡

@Heatking

7 ай бұрын

True that mate. I’m only on day rate don’t suppose it matters how long it takes ha ha