Copper pipework.. so much better than plastic 😅
Тәжірибелік нұсқаулар және стиль
Copper pipework.. so much better than plastic 😅 #plumber
In this episode, I have to first fix another renovation (same property as the asbestos soil).
Almost complete new central heating circuit, and hot and cold/waste to utility room.
Thank you for your continued support!
Most tools featured are here…
amzn.to/3jPFOjG
#plumber #tools #tradesman #leaks #apprentice #business #selfemployed #contentcreator #instagram #tiktok
00:00 Introduction
00:29 Lets get started
19:38 Disaster Strikes
19:49 DAY 2
24:27 Outro
Пікірлер: 76
Hope you’re enjoying the Euros if you’re into football! And the weather! Thank you as always for the support! See you in the comments ❤
@user-jl7yf6py1k
10 күн бұрын
Footballs not coming home 🇮🇪🇮🇪🇮🇪
@Heatking
10 күн бұрын
@@user-jl7yf6py1k probably true!
Top work as always Dan - at least you had a nice clear space to work in!
@Heatking
5 күн бұрын
Cheers Chigs! Appreciate that. And yeh it’s always nice in an empty property too
Top job Dan❤. A lot of pride love sweat n tears but it’s all worth it.. it will be notice in years to come when the do a renovation of some sort that they have picked the right guy to pipe it all up❤
@Heatking
8 күн бұрын
Thanks mate! Hopefully I’ll be the next guy in years to come taking it out again ♥️😂
@user-li8gr8ur8l
8 күн бұрын
@@Heatking why not buddy. You have made a good example to start with so hopefully it won’t be too difficult to work with in the future❤️
@Heatking
8 күн бұрын
@@user-li8gr8ur8l fingers crossed mate! However I hope this is in to last 😂
@user-li8gr8ur8l
8 күн бұрын
@@Heatking it will why won’t it.🤣
I was trying so hard to follow the networks of pipes and where they lead to and my brain keeps failing me 😂 This is why we need people like you in the industry. Wealth of knowledge and experience!! Thanks for another great video Dan
@Heatking
10 күн бұрын
Thanks mate, there was a maze of pipework. But thankfully, this one wasn’t too bad as all the ceilings and walls opened up!
Noooo 😂😂😂 19:33
Only had time to watch 5. The builder is kind, mostly expected to notch the joists. He put in 3x2 on edge👍. Also, the open pipes u connect on to. Tape them up. My OCD crap in pipes
@Heatking
8 күн бұрын
Cheers pal! Yeh he was very kind for putting the 3x2 in, I did ask for this though 😂
Great job as always Dan. All that lovely copper pipework. Beautiful and neat. Just to be boarded up never too be seen again 😢
@Heatking
9 күн бұрын
Thanks Mac, and I know. It’s a shame :( haha but at least i have video evidence 😂
Another great video Dan, hope it’s warm back home, 😜.
@Heatking
10 күн бұрын
Haha cheers Paul,… some would say too warm 😂😂
@paulj9022
10 күн бұрын
@@Heatking good, home tomorrow and bet my garden like a jungle. 😂.
Mind boggling all those pipes, dont think I would sleep till job done. Good vid.
@Heatking
9 күн бұрын
Haha cheers Roy, it’s mainly a maze of heating pipes in fairness, so just flow and returns :)
Interesting video Dan, you working off plans when doing jobs like this, seems complex. Theres something substantial about copper that you don’t get with plastic. Nice pipework ❤
@Heatking
9 күн бұрын
Thanks very much Matt! Copper does look a lot better, I’ll give it that 😂😂😂
15 cups of tea later 😂😂😵💫😵💫😴😴😴😴
@Heatking
8 күн бұрын
😂😂😂 better than coffee 😂😂
Looking good 👍 Regarding insulation, when watching HeatGeek he's said that any thermal 'loss' from the pipes, inside the 'thermal envelope' is not loss, save your money on the insulation. Only if its outside the envelope should it be insulated, lofts, garages etc. Food for thought 👍
@Heatking
9 күн бұрын
Thanks interesting to read! Thank you for that mate! 💪🏼
great video dan its always hard to start a job like that, but rewarding when you get everything in place regards John
@Heatking
10 күн бұрын
Thanks John! Appreciate that mate, yeh once you’re into it. It starts to flow.
Another good video mate, nothing wrong with a bit of Coldplay’s my parrots died 😂 to follow a comment about the push fit life expectancy my father in law told the rep that cordless drills would never take off you can’t beat a “yankee” screwdriver sometimes new fangled things just work in the end he had multiple drills 😂 hope all is well whilst I lie here recovering from my total knee replacement of 6 days wondering if the pain will ever stop 😂
@Heatking
10 күн бұрын
Ouch!! I’d of thought the pain would have died down by now! Hopefully it does soon mate! And cordless drills would never take off 😂😂😂😂 that’s absolutely brilliant.
You got to love them builders
@Heatking
10 күн бұрын
Sometimes 😂😂😂
Very nice Dan. I do cylinder cupboards in x-press copper. Nowt wrong with it. I do enjoy bigger copper jobs when I get a chance at doing them 😊 Multi tools are so very handy but totally obnoxious soinding tools. 😂 Oh and I melted the gearbox in my Milwaukee drill today 🤦 127mm holesaw too much for it.
@Heatking
10 күн бұрын
Haha yeh I can imagine that would be too much for any manufacturer of a drill 😂😂 I don’t however enjoy the bigger jobs, I love jobbing around 😂😂 you’re absolutely right about the multitools, proper angry noisy tools 😂😂😂
Great video Dan! Beautiful copper pipework- pity it gets covered in insulation! Nice to see your dad’s back! I bet he’s not a fan of speedfit! (Nor am I - at best it looks pretty awful.)
@Heatking
10 күн бұрын
Thank you very much Steve!! And yes Dads back. By popular request haha! No he’s not a big fan of it. But I think he’s more a fan of it than me!
Building control are knobs. If you had put in 4” they would’ve said it needs to be 6”.
@Heatking
10 күн бұрын
Hahaha that’s true is that Ian! This is a straight run of 2inch with the correct falls on. No way it would block!
Jobs like this is when the press gun has no equal!
@Heatking
10 күн бұрын
Absolutely mate! ♥️
@paulsmith2931
9 күн бұрын
Soldered fittings still for me, if your just doing domestic work, why pay £2k for a gun, have to have it recalibrated at a cost and the fittings are way more expensive than end feed. Commercial work press is s a must but not for this job.
I was thinking what a top lad doing an install in copper.Until I seen the press. I think in years to come press will be a plumbers dream. It will all leak
@harrysahota4072
10 күн бұрын
Those o rings will probably degrade, press is for speed, most plumbers I know wouldn't use press in their own homes
@Heatking
10 күн бұрын
What about pushfit fittings? What’s your opinion on them?
@user-kq9gq2xq2f
10 күн бұрын
@@Heatking I hate push fit.If I used it and the customer watched he would think why am I paying this muppet.
@Heatking
10 күн бұрын
@@user-kq9gq2xq2f fair enough 💪🏼
@user-kq9gq2xq2f
10 күн бұрын
@@Heatking I'm not knocking anyone who uses it? It's used all the time every day with no problem. I just prefer not to use it. Keep up the great videos. Thanks Sean
Never been on a big job! 😊
@Heatking
10 күн бұрын
😂😂😂
The state of that push fit stuff man 🤢🤢 I know it wasn't your choice lol but it looks awful
@Heatking
9 күн бұрын
😂 don’t get me started, it has a time and a place. But I didn’t want to use it this time! 😂😂😂
Stop being lazy and clean and connect the f&r lol
@Heatking
10 күн бұрын
😂😂 I am lazy 😂😂
Just back from Installer 🤘😎🤘🎥🫖☕️🍪🍪👍👍
@Heatking
8 күн бұрын
Was you there Wednesday Wayne?
@SuperWayneyb
8 күн бұрын
@@Heatking I have been there all week Buddy 👍
@Heatking
8 күн бұрын
@@SuperWayneyb gutted! I missed you :(
@SuperWayneyb
8 күн бұрын
@@Heatking I’m sure we will catch up somewhere Bud 🤣😂🤣😂🤣😂🤣😂👍