Disclaimer Saved Me! - A Day In The Life Of A Gas Engineer 87
Disclaimer saved me on this job! You never know when it's going to happen, but when it does, you better make sure you've covered!
#plumbing #heating #powerflush
Powered Now - Job Management Software
www.powerednow.com/cputility
towel radiator
vaillant
ufh
underfloor heating
blockage
magnetite
scale
lockshield
radiator valves
electric
boiler
electrical
wiring
Пікірлер: 59
Please don't forget to LIKE & SUBSCRIBE if you're taking the time to watch 🙏🏾
great video,always the suspense of a power flush ,great when things start getting hot,always better with two people ,lot of running up and down,the last thing you want is problems after a graft,love your honesty.well done.great watch.
@cputilitysolutions
6 ай бұрын
Thank you mate 👍🏾
I thought it’s only me that gets bad luck like this! I know that feeling of it being a long day and something like this happening. Out of our control obviously and not your fault! You handle everything very well and professionally! Keep up the hard work enjoying your time and effort you’re putting into your content and videos! Helps me out massively with hints and tips and how I go about my own work. God send!
@cputilitysolutions
7 ай бұрын
Thank you for the kind words and feedback, glad you enjoy the content 🙏🏾
Putting out some great content appreciate the time you put into these. I find it hard enough getting the jobs done without all the filming
@cputilitysolutions
7 ай бұрын
Thank you mate, appreciate you taking the time to watch too 🙏🏾
Lovely silver boiler
@cputilitysolutions
6 ай бұрын
😂
Great video, well done.
@cputilitysolutions
7 ай бұрын
Thank you 👍🏾
Mate I had my bad day of the month yesterday a job went pair shaped, But probably not as bad as your one , A bad leak is the holy grail of a bad luck on a job, 👍👍🤜
@cputilitysolutions
7 ай бұрын
💯 mate, but if you don't get leaks you're not working hard enough 🤣
Better too. You never know what will go wrong with no fault of yours. Like said customer change as soon as something goes wrong. No matter how good the customer is you are always to be blamed. Good work bro.
@cputilitysolutions
7 ай бұрын
Thanks man 👊🏾
Top videos ,thank you
@cputilitysolutions
7 ай бұрын
Thanks 👍🏾
Great video and love the dress up for xmas and for your family for xmas amazing family is everything keep up the good work
@cputilitysolutions
7 ай бұрын
Thank you mate 👍🏾
Had a couple of f and e tank ball valves fail when bunging and swapping rads etc, if they look older than a year I always price to swap them as a must. I get pricing up for every eventuality would make the job £££ but the few things like that, pump valves, gates etc always nice to renew so not relying on old stuff. Friend did a flush and swapped out an old floorstander with an Elson tank, an old check valve and closed gate valve failed and allowed the half cut out tank to refill over the night and flood the house, his mistake for trusting old stuff to do it's job but harsh lesson learnt 😅
@cputilitysolutions
7 ай бұрын
Ah no way!
Feel your pain bro, my pal told me about putting disclaimer in when flushing when it happened to him once.😢😅
@cputilitysolutions
7 ай бұрын
Nightmare when it happens
Indian Santa Claus! Love it! Need to get Uncle dressed up as Santa 👍 Thanks for the vid
@cputilitysolutions
7 ай бұрын
Haha thanks man 👍🏾
If those large magnets were that covered after just a few hours, I wonder what state the existing Magnaclean is in? I bought a couple of really long vacuum hoses so that the vacuum stays out of the loft completely. Enjoying your video's.
@cputilitysolutions
7 ай бұрын
I was tempted to open it but it was too risky 😅 thanks man 👊🏾
Great video, just starting out on my own, any chance I could get copy of the disclaimer or terms and conditions.
@cputilitysolutions
7 ай бұрын
Thanks - drop me an email 👍🏾
Before i take the pump out completely i sometime remove the pump head if I'm not sure if the bungs have held
@cputilitysolutions
7 ай бұрын
Good idea 👍🏾
That was very unlucky. Like you said, it was under insulation, so how was you supposed to know that it was loose. I have just subscribed to your channel. Thank you for this video. I've learnt now to check the connections to the F&E tank to try and mitigate that issue in the future.
@cputilitysolutions
7 ай бұрын
Thank you and welcome to the channel 🙌🏾
These things can happen but the insulation all over very hard to see the overflow connections technically a preexisting fault but understand some customer prob take the advantage.
@cputilitysolutions
7 ай бұрын
Yup could have gotten stung if I didn't cover myself!
What way do your disclaimers, is it just word of mouth or do they have to sign something
@cputilitysolutions
7 ай бұрын
I have a saved PDF which I can either print and get customer to sign but usually I just email it over and ask customer to reply back to say they have read and agreed to it
Disclaimer on immersion heater changes 🎉🎉😅😅😅
@cputilitysolutions
7 ай бұрын
👍🏾
🤘😎🤘
@cputilitysolutions
7 ай бұрын
👊🏾
The old magna clean must be full of gunk
@cputilitysolutions
7 ай бұрын
Yup, but I wasn't going to risk touching it!
Should sort them feed and vent pipes mate should be 150mm apart and not joined. Wouldn’t of pissed about with that pump should of took magnaclean off and you’ve changed thet gate valve but left the shitty old pump valves on 😂😂🤦♂️ you can get full bore pump valves butterfly ones….. should of watched rest of vid 😂
@cputilitysolutions
7 ай бұрын
👍🏾
Desi Claus 😂
@cputilitysolutions
7 ай бұрын
😂
What a ball ache
I wonder what you got paid, Was it worth it ?
@cputilitysolutions
7 ай бұрын
£600 - I'd say worth it 👌🏾
@dieselbiggins
7 ай бұрын
@@cputilitysolutions yep that’s definitely worth it, thanks for the reply and thanks for the videos. Your the man!
@cputilitysolutions
7 ай бұрын
@@dieselbiggins Cheers mate
Santa’s not real????
@cputilitysolutions
7 ай бұрын
Who knows
Why did the FE overflow? Was it a case of tying that ball valve up and bent it? I take FE out completely on a flush, outside, clean it, and fit new BV. I get you though, I've had a fair few with no overflow at all, so a disclaimer is always needed. Top work mate.
@cputilitysolutions
7 ай бұрын
Thanks mate, I think it was just stuck, typical when I'm finishing up! Yeah I normally take it out to clean too but this was in a right awkward place
The deflector for rain and that elbow tight above the fan cable plug seen quite a few fans blown due to elbow leaking Nice video as always
@cputilitysolutions
7 ай бұрын
Thanks mate