Пікірлер

• 
  @russellbaldry50958 сағат бұрын

  Always pains me when i come across a bath that has been tiled in🤦🏼‍♂️ do they not think you may need to get under there in the future🤨

• 
  @JK-cv2mz12 сағат бұрын

  Really useful video thanks, is this the same as the ecofit 825-835 as in same seals and service to carry out?

• 
  @cputilitysolutions9 сағат бұрын

  Yup all the same mate 👍🏾

• 
  @plumbertimeКүн бұрын

  Nice job mate, should offer to fit a shock arestor and limescale reducer, crack that filter too and see if waters dirty, get them quotes in 💪🏻👌🏻👍💰

• 
  @cputilitysolutions20 сағат бұрын

  👊🏾👊🏾

• 
  @lemmykilmister450Күн бұрын

  Fitting an Ri years ago, the guy talked to me all day long. Lost focus and connected the flow to the gas. I noticed as soon as I started filling, but the water was already in. Next day I pulled the meter, emptied it out, vacced the gas pipe at the meter, repiped it and it fired straight up 😅😅😅😅

• 
  @cputilitysolutionsКүн бұрын

  Damn you got luckyyyy!!

• 
  @HeatkingКүн бұрын

  Good video mate. Enjoyed the thermal store install. ❤

• 
  @cputilitysolutionsКүн бұрын

  Thanks man 👊🏾

• 
  @tonymurff5234Күн бұрын

  Nice variety on this video, Brilliant content as always mate 😎👍🤜

• 
  @cputilitysolutionsКүн бұрын

  Thanks Tony, trying to keep it varied you know 👊🏾

• 
  @andrewoleary9704Күн бұрын

  Got a call out to a private new build extension years ago. Customer reported a water leak. Builder was nowhere to be found. Thinking a tap / rad …. Arrived at property…. Water coming out of hob!!!!! How it held the pressure when turned off I’ll never know. Turn hob control on… water hits the ceiling.. turn off water stops!! Turn off at meter, cap it and report it (Corgi then), notification to water provider! Massive issues

• 
  @cputilitysolutionsКүн бұрын

  Oh bloody hell! I've heard a few stories of people piping the water up to the gas line!

• 
  @andrewoleary9704Күн бұрын

  @@cputilitysolutionstied my up for months with various investigations! If you get a call out for something similar… your busy !!

• 
  @user-li8gr8ur8lКүн бұрын

  Got lucky there Chirag❤😂 could have had bad consequences if water got in the gas pipe💦💦. Top job

• 
  @cputilitysolutionsКүн бұрын

  Thanks Arif 👍🏾

• 
  @joshd790Күн бұрын

  Hi pal great video as always where do you get your press fittings from water and gas 👍

• 
  @cputilitysolutionsКүн бұрын

  Thanks mate, I get them from Plumbing For Less online 👍🏾

• 
  @CommercialGasEngineerVideosКүн бұрын

  Water in the gas pipe 😢

• 
  @cputilitysolutionsКүн бұрын

  Tell me about it 😅

• 
  @jetson-72 күн бұрын

  Awesome job buddy. Loving the content. Only thing I would say is I would of used a 25ltr expansion vessel. Without working it out to deeply, I just use 1ltr for every rad. And find the nearest expansion vessel larger. But great job mate. 👍

• 
  @cputilitysolutionsКүн бұрын

  Thank you mate, yeah can't go wrong with too much expansion 👌🏾

• 
  @melvinevans99812 күн бұрын

  Horrible installation pipe everywhere how man lol😂❤

• 
  @allahdittababu48022 күн бұрын

  To be honest with family friends they must of been there for you at some point in your life so its important to see which family member it is ... in Asian culture you do thw favour or you dont but i completely agree the person should still pay you as you have a family to feed.

• 
  @maximuswong30923 күн бұрын

  100% agree, i fell out with my family for a number of years because i charged my nan a callout fee when her boiler flooded her bungalow...fuck em, my sister can go and try and try to change a WB flow turbine next time for free.

• 
  @user-li8gr8ur8l3 күн бұрын

  Jobs a gooden as usual❤

• 
  @cputilitysolutions3 күн бұрын

  @@user-li8gr8ur8l thank you

• 
  @Exgasman90724 күн бұрын

  balancing valve on the HW return would be nice

• 
  @cputilitysolutions4 күн бұрын

  👍🏾

• 
  @lewisconway64314 күн бұрын

  I love a wiring job/fault find. Hate when they're all in wagos like that though. My brain gets all jumbled up 😂 I much prefer a wiring center even a messy one. You done well to just work methodically through that

• 
  @cputilitysolutions4 күн бұрын

  Thanks mate, yeah it can be a proper wiring jungle at times but as long as you can trace each cable back like you said then all good 👌🏾

• 
  @lewisconway64313 күн бұрын

  People would critasise if you posted the cure for cancer, if you wanted to snatch it and weighed up the pros and cons it's on you. Hopefully you got an extra hour or 2 in the sun with the kids. Keep em coming mate

• 
  @cputilitysolutions3 күн бұрын

  @@lewisconway6431 thanks Lewis appreciate that mate 👊🏾

• 
  @johncoen66324 күн бұрын

  So, so so so so so so

• 
  @cputilitysolutions4 күн бұрын

  Sooooooo 🤣

• 
  @dzeka74494 күн бұрын

  Have one of this to do today but not sure if that’s the fault with it. It overheats and shows 100 degrees but still cold water comes out. shows e9 276 code Changed temperature sensor and check the flow sensor but the boiler kicks in when hot water is being used

• 
  @Heatking4 күн бұрын

  Good video Chiggs 🎉

• 
  @cputilitysolutions4 күн бұрын

  Thanks mate 👊🏾

• 
  @Mo-Man3215 күн бұрын

  I worked for family not anymore

• 
  @tonymurff52345 күн бұрын

  😎👍🤜

• 
  @cputilitysolutions4 күн бұрын

  👊🏾

• 
  @56ty78ui5 күн бұрын

  The first video is just you talking and planning stuff out. Then showing the fitting after. Quite boring tbh mate. I think for more subs, you need to show more practical work, maybe a voice over to explain as you go along. Just my opinion.

• 
  @cputilitysolutions4 күн бұрын

  Fair enough and I appreciate the feedback. I much prefer to film breakdowns where it's more involved, when it's install jobs I tend to leave the camera on the side and just crack on but I'll start leaving it on a timelapse or something and then voiceover like you suggested 👍🏾

• 
  @user-dc8eb6xc5r3 күн бұрын

  @@cputilitysolutionsI like the instal videos

• 
  @kevinwilliams14215 күн бұрын

  Normally I’d take the side of the boiler off with the magic of 2 screws

• 
  @cputilitysolutions4 күн бұрын

  Can't do that on the older models though

• 
  @ChrisJoned5 күн бұрын

  Wow British Gas doesn’t do this when they service my boiler

• 
  @user-yr1uz4ue3v6 күн бұрын

  You haven't done the 15mm pipework in the background have you😮

• 
  @cputilitysolutions6 күн бұрын

  Nope

• 
  @iamtoooldtocare6 күн бұрын

  The fact that you even considered snatching that heater shows a complete lack of professionalism.

• 
  @cputilitysolutions6 күн бұрын

  Yeah ok 👍🏾 😂

• 
  @b1h2u3p417 сағат бұрын

  How is it unprofessional? If it saves you time and you are confident in doing it than can't see no problem. Also the place he was in was not in high point upstairs in loft etc...

• 
  @cputilitysolutions14 сағат бұрын

  @@b1h2u3p4 I think he's salty because he hasn't got the guts to do it himself 😂

• 
  @b1h2u3p414 сағат бұрын

  @@cputilitysolutions True lol 😆

• 
  @michaelanderson80107 күн бұрын

  You look very well in your kitchen after having a lovely holiday with your family! Unfortunately the little game of football on Sunday night didn’t work out so good. Sorry if worked perfectly for Spain!! Keep up the great work mate! Nearly ready for next Sunday.👍👍.

• 
  @cputilitysolutions6 күн бұрын

  Thank you! 🙌🏾

• 
  @hussainkhan66307 күн бұрын

  Bro fully agree bro

• 
  @Alfie-gf9ze7 күн бұрын

  Speak to ur family instead of moaning to the world

• 
  @dmarriott97017 күн бұрын

  There’s no way on this earth would I have given snatching that immersion heater a thought. I’ve had several that have virtually unfolded and proved a right b---d to get out. You’re a braver man than me to do that.

• 
  @cputilitysolutions7 күн бұрын

  Done a couple of times but this one wasn't that old so I took a risk 😂

• 
  @Heatking7 күн бұрын

  Haha well bloody done mate. I think I’d of emptied it 😂❤

• 
  @cputilitysolutions7 күн бұрын

  😂 thanks Dan 👊🏾

• 
  @andrewoleary97047 күн бұрын

  I never snatch unless I have to mate

• 
  @user-li8gr8ur8l8 күн бұрын

  Interesting one Chirag . Top job buddy❤

• 
  @cputilitysolutions8 күн бұрын

  🙏🏾

• 
  @user-li8gr8ur8l8 күн бұрын

  Good job Chirag ❤

• 
  @cputilitysolutions8 күн бұрын

  Thanks 👍🏾

• 
  @scotsdunc8 күн бұрын

  Thats why i dont work for family

• 
  @cputilitysolutions8 күн бұрын

  👍🏾

• 
  @markchristohperowen68068 күн бұрын

  tf1 again thats been leakin, and they wonder why people dont use their products.. £7 inhibitor and cleaner you keep it mate. i should sell the old ones on e bay i took out. see all the green fernox? thats normal. real life your tf whatever is not fit for alpha release yet alone a product release. what testing did you do? and can i see the papers?

• 
  @tonymurff52348 күн бұрын

  Brave Man doing that immersion I don’t think I would have the Bottle to a snatch, Brilliant Knowledge on the wiring as always Mate 👍😎🤜

• 
  @cputilitysolutions8 күн бұрын

  Haha thanks mate 👊🏾

• 
  @heatpump85668 күн бұрын

  Braver man than me with the immersion. I’ve had loads that twist and deform and are a real struggle to get out. Great vid

• 
  @cputilitysolutions8 күн бұрын

  Thanks mate 👊🏾 I've had some like that too, luckily I'd drained down on those occasions 😂

• 
  @jockster55258 күн бұрын

  Lol ..i enjoyed that . Often jumped immersion heaters ...in my sleep 😂

• 
  @cputilitysolutions8 күн бұрын

  The things that nightmares are made of 😂

• 
  @TomChapman-wv9iq8 күн бұрын

  Braver man than me lol

• 
  @cputilitysolutions8 күн бұрын

  😂👊🏾

• 
  @johnward50068 күн бұрын

  I'd NEVER encourage anyone to attempt an immersion heater change like that, too much to go wrong! Like to see you try that on a Megaflow!

• 
  @cputilitysolutions8 күн бұрын

  Why don't you show us John?!

• 
  @johnward50068 күн бұрын

  @@cputilitysolutions I wouldn't attempt ANY immersion change without draining, it's not something ANY proffessional would attempt!

• 
  @cputilitysolutions8 күн бұрын

  @@johnward5006 good for you!

• 
  @Chubby_T05118 күн бұрын

  I couldn't have left that "wiring centre" in that state. My OCD would've been going off the scale. There would be a lot more engineers that wouldn't get confused with wiring if people just stopped slapping it in like this to begin with.

• 
  @cputilitysolutions8 күн бұрын

  💯 mate

• 
  @andyjacklin99508 күн бұрын

  Think that wiring job needs a bigger wiring centre😂😂😂

• 
  @cputilitysolutions8 күн бұрын

  I thought the same 😂

• 
  @CommercialGasEngineerVideos8 күн бұрын

  Thanks for the upload. Something to take ones mind off all the things happening around the world today.

• 
  @cputilitysolutions8 күн бұрын

  Thanks man 🙏🏾

• 
  @markchristohperowen68068 күн бұрын

  thats within mi instructions . im guessing your taking it to the limit on distances.

• 
  @cputilitysolutions8 күн бұрын

  👍🏾

• 
  @markchristohperowen68068 күн бұрын

  @@cputilitysolutions risk asses ill drop some to aron.

• 
  @user-li8gr8ur8l8 күн бұрын

  Thanks for that Chirag very handy tip

• 
  @cputilitysolutions8 күн бұрын

  👍🏾

• 
  @user-et3gf6pj9r8 күн бұрын

  I got a set of these a couple of months back. Really got me out of some shit situations too. You wouldn’t believe how useful they can be.

• 
  @cputilitysolutions8 күн бұрын

  💯

• 
  @paulp75612 күн бұрын

  That!! 💯