Hi everyone! Let me know if you have any questions about this tool in the comments below! :)

I started watching your tutorials on Sketchup years ago and now I watch your Blender tutorials. You are to the point and explain things in a way I can understand. Very thorough. And I love Bonnie, both the model and the real Bonnie in the photograph. I appreciate what you do.

MIND=BLOWN. Every time I see something that makes you create shapes in 2 seconds, I'm in AWE of the power of Blender.

I like how you go into one tool at a time and going in depth, so it's not overwhelming.

@TheCGEssentials

3 жыл бұрын

Step by step one at a time :)

These series are Pure Gold !

@TheCGEssentials

3 жыл бұрын

Thanks - glad you liked them!

Thanks for the tip! Very helpful for beginners!

dang never knew this bridge edge loop are powerful !!! thank you

@TheCGEssentials

3 жыл бұрын

For sure - glad you liked it! :)

Thank you. I really like all of your tuts.

Tanks for a very thorough tutorial .. Great video!

Very straight tutorial! Thank you.

thx a lot, very comprehensive tutorial on this feature !

great, really simple and explanatory

you are savior man thank you trying to fill the half closed loops and here I found the solution thank you.

i wish i could tap the thumbs up twice. such a good tutorial, you've saved me so much time! thanks

I know its been said, but I never knew this tool was in blender, and ive used blender for a lot of years, just shows how you can get tied up using the same routines, Thanks so much, yout vids are great, dofo a sub here and a thumbs up......

OHHH i love these tuts.. simple but very effective!!!

@TheCGEssentials

3 жыл бұрын

:) - Glad you like them

OMG THANK YOU. This has answered all my questions.

@TheCGEssentials

3 жыл бұрын

Happy to help!

Thank you... No other video I have seen says that you have to JOIN the objects together for Bridge Edge Loops to work. THANK YOU THANK YOU.

Best tutorials on the Internet! Hug you! Super mega hyper giga PRO Blender tutorials!

Wow you have saved me loads of time and money! Thanks!

@TheCGEssentials

3 жыл бұрын

Great to hear!

I'm new in this 3d world. Thanks for share!

Nice, Thank you!

Sensational! The ideal is to make a personalized manual of these functions to remember them easily, as there are many.

@TheCGEssentials

3 жыл бұрын

That's also why I'm trying to bookmark all the videos - that way each tool and function is easily accessible :)

@niadhson

3 жыл бұрын

@@TheCGEssentials Good idea!

I found this very useful despite the vocal fry. Thanks!

@TheCGEssentials

Ай бұрын

I...talk how I talk I guess? But glad you liked it!

Great video as always.

@TheCGEssentials

3 жыл бұрын

Thank you! :)

Excelent! Kudos!

Thanks, I’ve been trying to create a large bevel between a pipe and a cylinder and couldn’t get the right shape without a lot of tedious tweaking of the geo. This might work.

Thanks for the video it just saved my sanity. I could not figure out why when I tried to bridge two objects nothing happened. When I duplicated an object while in Edit mode the Bridge tool worked. However, whenever I duplicated an object in Object Mode and then went into Edit Mode with both objects selected, the Bridge tool did not work. This video made me realize that the most important thing for this tool is that the objects to be bridged must be joined!!!

@thedgilsc1579

11 ай бұрын

Hello, I have same issue. When I create 4 circle independantly and after select them all and edit , I can access all of them but when using bridge edge loop it does not work. It work only if I create this cercle in the same object.

@thedgilsc1579

11 ай бұрын

it's explained in video at 3.12. CTRL+J to join them all before appliyng bridge edge loop...

Your vids are gems fairly

@TheCGEssentials

3 жыл бұрын

Thank you!

Thank you....thank you so much......,❤️❤️❤️❤️

your description sectiion is very good teaching method, thank you.

@TheCGEssentials

2 жыл бұрын

Glad it was helpful!

Thanks. I follow you and your videos are really useful.

@TheCGEssentials

3 жыл бұрын

Glad to hear that!

Was looking for more tips how to create connected holes with bridge edge loop. but this was also good.

@TheCGEssentials

3 жыл бұрын

Can't remember - might have talked about that here - kzread.info/dash/bejne/nYmr1MNpk7CahNI.html

@1982Jonte

3 жыл бұрын

@@TheCGEssentials Thanks!

very useful thanks very muchh

@TheCGEssentials

10 ай бұрын

You are welcome!

Thank you Very much! Do you know how to change the order of the curves to be merged?

thank u

I now know how to make goblets and urns. Yay.

I kinda wish you had created the circles and mentioned the Ctrl+J thing at the very beginning of the video. This really doesn't work without that step. I was going nuts trying to figure out how you made the circles into a single object until I opened the description and read that step. I'm brand new to Blender, so I thought maybe that I was supposed to use bezier circles instead of mesh circles, but those didn't work either. I realized after watching the rest of the video that you covered Joining later. But I tend to pause your videos as I learn, so I never got to that part. I was stuck for quite awhile trying to make the opening circles work. I almost quit the tutorial in frustration until I thought to look in the description. I find your videos are the most helpful. Most "beginner" tutorials seriously suck because the instructors are great technicians but very poor teachers. They assume a base level of knowledge about Blender where there may not actually be one for a beginner. Your videos are excellent, but be careful. You're an expert. What's a small step for you may be a dealbreaker for noobs who won't just "figure it out". I'm a Photoshop/Illustrator instructor, so I'm not unschooled. I'm just really new to 3D. This is a totally different design methodology that literally requires a dimensional shift in how one thinks about space and asset creation. I'm having to break a lot of old habits to learn new ones. I love your courses, but sometimes I feel like I'm hanging on for dear life just to follow you, because I missed a small step like this one.

Thanks ao much!!

@TheCGEssentials

3 жыл бұрын

Welcome!

Holy f- you´re genial , thanks a ton!

Thanks! I was trying to use the Bridge loops feature, but I did not know the objects should be joined together (ctrl+J)

SUBSCRIBED..❤️

how did you make the lines and shapes?

Hi, Your tutorials are great! I'm using v 2.91. - the "bridge edge loops" isn't working. It worked original great - now it won't loft? Can you help?

@daniishere1009

3 жыл бұрын

Make sure all the shapes are joined. Then apply bridge edge loop tool. Hopefully it should work.

can you make tutorial using revolve method to create symetrical object like wine glass etc.

@TheCGEssentials

3 жыл бұрын

I think I talked about this here - kzread.info/dash/bejne/ZWWmyqpsdrCfXcY.html

How did u draw them half circle loops

hay way after me push the botton bridge loop can't active or not working?

Hi, Great tutorials - I'm unable to get the "circles" to bridge/loft? Can you help?

@gdematteis9023

3 жыл бұрын

Sorry for the repeat question - The "join" shapes works -- but is there another way to create a shape with a "curve" and then loft/bridge it with joining the shapes

Help!! Everytime i use bridge edge loop, the loop go to wrong side just like if my face were twisted. The problem is it not, e checked the normals! What can i do

i was having issue with blender not showing up edges menu or bridge loops basically what i did is convert it to a mesh to fix it

thank you!... i've too often had to search youtube to discover I hadn't control J two objects before swearing at my monitor/errors on blender when failing to bridge edge loops...

@TheCGEssentials

3 жыл бұрын

You're very welcome!

This guy makes me enjoying blender, but how did you make the circular array of circles? ^__^

@TheCGEssentials

3 жыл бұрын

I can't remember, but I might have done something similar in this video - kzread.info/dash/bejne/mWd4qNqBYLGdhZM.html

Say "know what i mean, Bern?" bro you look just like Ernist. Carry on

@TheCGEssentials

2 жыл бұрын

Ummm...probably not

Idk if im the only one having this problem but when I create a curve, when I got to edit mode It's .... limited I dont know how else to describe it, and it won't give me the option to bridge

@TheCGEssentials

3 жыл бұрын

Are you sure it's edit mode?

That's like the "make a hull" software for yacht designing.

Buddy you deserve more subscriber, Just one from me

Now they just need to make it as a modifier!

Thanks this was partially helpful. You missed explaining that there is only one object that you presumable created from joining several circle objects. This is important as other wise the bridge function will not work.

@TheCGEssentials

2 жыл бұрын

I don't understand - why would it create more than one object?

I see nothing 3.3 is son setting not on?

Had to join them first Ctrl J

Sir how to make grassland. If I want to make road in grassland how can I create it. Plz sir make a video.

@TheCGEssentials

3 жыл бұрын

At some point

as of today the lofting isn't happening and i can't understand why.

its just ctrl J ....man thank you....

HUHHHHWWWWHATS UP guysssss

HHHHWhats up guys!!!

Blende 3.0 not working, doing nothing ...

🧐

This has too many settings many unpredictable for it to be destructive. Nothing can beat a dedicated loft modifier like other software have

my bridge edge loops is not working dammit

Buy, I already know about this

@TheCGEssentials

3 жыл бұрын

Do I need to run all tutorial ideas by you before creating a video to make sure you DON'T know about it?

I just wonder why is there a dog always?

thx!