I can 100% vouch for the Hex Bit Storage box. I use it almost every day.

@thefreedomguyuk

2 жыл бұрын

Yup. Gonna make myself one. The T handle too.

bro the screwdriver handle is so useful thank you a lot !

@jkpoynter

2 жыл бұрын

I dunno, the dung ball former was pretty useful too…

I love making cool staff!

I'll go for the coin sorter, the hex bit holder and the t-handle. Very use ful

Nice collection, more useful then most other 3d printed collections. thank you for sharing

The Allen Wrench T-handle was sweet. Thank you for the share.

Nice ideas on print items... Just a suggestion - Perhaps add a comment showing how many grams each print weighs so folks will have an idea of the amount of filament they will need. (and how long the print takes would be great too.)

@3DPrintsBuilds

2 жыл бұрын

I keep it in my mind.

@StormBurnX

Жыл бұрын

That depends on your slicer settings! It will show you the amount and time required when you slice your print for your printer.

@44Mag

Жыл бұрын

@@StormBurnX Is there a tremendous variance in that? (I just figured they would all be within 30% or less of each other?) - I do noy own a printer though...I just use the one at the library in the Maker area, and do not know anything beyond the basics with that printer, which they said was a good one that retails for about $2800?

@shelbyseelbach9568

Жыл бұрын

Your slicer will give you that information, and the information will vary depending on your settings.

Was sceptical But, there ARE nuggets here ! Thank you!

I see a sidewinder i like !

Love to see that delta!

love how he added November 2021 to the title

You should add a hand crank for the coin sorter.

I thought he was making meatballs!! I was wondering why he was in the backyard with a bucket of ground beef

nice and cool prints. how do u print without oozing I tried many times using octolapse but ooze spoils the print

@3DPrintsBuilds

2 жыл бұрын

You need to try different retraction settings. Different filaments and prints need different settings.

That Alen key handle looks noice. Imma try printing it at 69mm/s

Awesome work! What’s your retraction settings on Ender 3v2 when timelapsing?

@3DPrintsBuilds

2 жыл бұрын

Thanks! Distance 6mm and speed 85mm/s

@madalinilie2563

2 жыл бұрын

​@@3DPrintsBuilds thank you so much! I appreciate that!

Love it

Great stuff there...👍👍

Please tell me how you processed the printed model? It's as smooth as cast. How did you achieve this?

@3DPrintsBuilds

2 жыл бұрын

Right settings and calibrated printer

@AtlantisRouTou

2 жыл бұрын

Not smooth. Wobbling beginning with 3-4 cm

Awesome bro

@3DPrintsBuilds

2 жыл бұрын

Thanks!

Nice video, keep it up, thanks :)

@3DPrintsBuilds

2 жыл бұрын

Thanks!

Nice

If I have the 3d printer I'll use it for making dollhouse for my toys And some furniture for them and for some of my school supplies🤩 but sadly my mom wouldn't let me lol ill buy it in future💀 Sorry for long essay 😂

I wanna 3D print an herbal grinder

I really love the coin sorter except that I can’t use it since I live in Australia and coins there are really different

@3DPrintsBuilds

Жыл бұрын

Maybe some one have done it for Australian coins. You can search from cults3d, thingiverse or printables.

@bullygarfield1528

Жыл бұрын

@@3DPrintsBuilds yeah Imma check for one

Can you 3D print new wallpaper and curtains?

Awesome video can you share your slicer settings thanks

@3DPrintsBuilds

2 жыл бұрын

Thanks! I have different settings for different prints and settings are different for every printer. What 3d printer do you have?

@CROW_BH11

2 жыл бұрын

@@3DPrintsBuilds elegoo Neptune 2 thanks for your time

@3DPrintsBuilds

2 жыл бұрын

@@CROW_BH11 I can share you my Ender v2 basic settings Cura profile: bit.ly/2Zg40Ff

@CROW_BH11

2 жыл бұрын

@@3DPrintsBuilds sir you are AWESOME ILL THY IT😊👍

Paintball maker? Better as a meatball maker!

@3DPrintsBuilds

2 жыл бұрын

Not paintball. It's bait ball for fishing.

Wooooww 😍😍😍😍

Anybody know if there is a place where people have uploaded their 3D models for others to download and print?

@mirjanahaluzan9709

2 жыл бұрын

Thingiverse

@shelbyseelbach9568

Жыл бұрын

Google would've told you that at any time. How do people not understand what search engines do, it's like they have a TV but don't know that they can change the channel with the remote control. Jeez!

I prefer less than 25% of videos being chuck full of ads....

2:55 good

Screwdriver handle nice idea to replace the chinese rubbish one i bought few years ago.

Useful in the 60s lol

Ребята! Пожалейте себя и свое время, не печатайте копеечную поебень, которая продается уже готовая из литого пластика.

I use the cure

@3DPrintsBuilds

2 жыл бұрын

You can get my PLA basic profile for Ender V2 at: bit.ly/2Zg40Ff

_*Interesting!* _

do not use super snot!!! - it turns everything into an amateur ...

cuz you can't roll a meatball by hand??

@3DPrintsBuilds

2 жыл бұрын

There are no meatballs in this video

@davidannett3322

2 жыл бұрын

@@3DPrintsBuilds they look like raw meatballs

@3DPrintsBuilds

2 жыл бұрын

@@davidannett3322 It's fish bait powder mixed with water.

@davidannett3322

2 жыл бұрын

@@3DPrintsBuilds lol

Me parecen tonterías

Bbbbbbbb

The first one is laughable. You are holding the 3d printed card dispenser with one hand and dispensing cards with the other. Just hold the deck in one hand and dispence cards with the other, what's the difference? LMFAO.

This stuff is all useless IMO. In contrast to the title

@larrybud

2 жыл бұрын

Agree. While I get the novelty of printing stuff when you're new and learning how to print, the real cost/benefit is making custom parts. I mean, you can buy a hex bit storage box for 7 or 8 bucks., which would be higher quality. Would love to see piece cost on each of these.

@darkshadowrule2952

Жыл бұрын

Really the neat box was the only thing that seems regularly useful

more plastic junk for 10x the effort and in 4x the time

@wingwisetutorials6548

2 жыл бұрын

what’s your problem? this stuff is awesome and you don’t even have to touch it when it’s printing?

Print you have to glue? UGLY. Could have designed no-glue fitting ;)

I disliked this video!

Sold any 3d print or cnc invention ownerships in last 12 months? Answer no cause not 1 website in either of these comunities has resumed business services. Not a single website on net has been able to resume these critical business services for the entire comunity. Sad how almost all influencers just focussed on selling printers to newbs. Then abanding them. Or recovering old news like how to unclog a extruder or printing cookie cutters. Instead of supporting comunity of millions of users. Millions of peoples value jobs businesses all down. Are your influencers really any chop. 3d printing Nerd did support my work that ive spent an entire year to fix for all the comunity. He even took some action so well done to him. Vision minor also supported again a influencer with real support of comunity and a company id feel worth supporting in return. Ok i shall keep working to fix rhis for everyone in 3d print and cnc comunities.

@adrianbishop694

2 жыл бұрын

wtf is this nonsense i see you posting in places

@weaselsworld

2 жыл бұрын

I think this reads like somebody being butthurt because the "influencers" are focusing on the neat things they're doing with their 3D printers, instead of "supporting" (read: spending all day answering endlessly-repetitive and mundane questions already addressed in user guides and manuals) the community. Hey, newsflash: the only people who owe anything are the manufacturers supporting their machines (or components, for those DIY types!) with a warranty of some sort. Other than that, the only person responsible for coming up with a way to make a profit off the machine is YOU. Don't expect others to invest their time researching how this stuff works, do it yourself! You can design and print things that address personal needs or wants and learn a few things in the process, or you can spend your money and whine on internet forums about how you didn't actually receive a magic factory in a box to make you rich overnight. I mean seriously, "in the last 12 months"? What magic, otherwise-unobtainable things do you think are being generated by the CNC community where somebody can count patent sales per year, anyway? I have ideas I develop with my printer as a hobby, but trying to make a living off inventing these days, not to mention expecting 3D printing to magically make it somehow even more lucrative is just straight up looney.

hundreds of bucks to create plastic crap