I printed the Nano Vise for soldering small parts. It's handy.

Love this, thank you!

Its nice that you showed the print time and filament usage, great video!

@3DPrintsBuilds

2 жыл бұрын

Thanks!

The filament cutter would be great for weedwhacker line

@imateckid

2 жыл бұрын

I was thinking the same thing lol

@MR_G92

2 жыл бұрын

Weedwacker line works alright as printer filament also ha

@TheJacklwilliams

Жыл бұрын

@@MR_G92 Beat me too it! I heard that. Haven’t tried it, yet….

@MR_G92

Жыл бұрын

@Jack Williams I tried the oregan 1.7mm line and it printed fairly well

Génial vos réalisations

great ideas! I might try to make this nano vise + filament cutter and mount it close to the filament roll on the printer ...

Excelente video!

@3DPrintsBuilds

2 жыл бұрын

Thanks!

Smart little things😌👌🏼

Very useful tings printed.

make more video like this! Great work! Like It!

@3DPrintsBuilds

2 жыл бұрын

Thanks!

All these prints look absolutely amazing I'd love to have your profile loaded into the slicer👍👍👌👌

Класс, реально полезные вещи

hello very very good thank you

Cool Video😌

@3DPrintsBuilds

2 жыл бұрын

Thanks!

Did you use PLA for these items? Am trying to determine which brand to buy.

@3DPrintsBuilds

Жыл бұрын

Some prints are printed with PLA and some with PETG. PETG would be better for these prints.

I have problem printing threads. They have the edge bent upwards and I can't figure out why. Tried speed reduction, fine or normal print, different slicers, different PLA roles... Do you have any advice?

@3DPrintsBuilds

2 жыл бұрын

There could be cooling problem. Lower the print temp. Watch over your fan settings. Level your bed. Use slower speeds.

@FuriousImp

2 жыл бұрын

Did you calibrate your extrusion? There are plenty of videos on it. What I think might be happening is that the subsequent layers are cooling down, shrinking, and pulling on the layers below it, thereby warping it upwards. Let me know how it goes.

What are the press in threads called at 5:50?

@tallmaris

2 жыл бұрын

Threaded inserts. You can screw them in, usually in wood, or heat them up to melt into the pla.

5:06 thought it was meant to eat as chopsticks

8:47 Looks like a very bad idea; those valves can get pretty stuck and the last thing you want is for your tool to break just as you've opened the valve. There is quite a lot of water in your heater and most of it is going to come out while you frantically look for pliers. A metal tool costs a few bucks and is guanrateed to work. Some things are better off in metal, and this is one.

@3DPrintsBuilds

2 жыл бұрын

The original bleeding tool, which came with a valve is also made of plastic. I haven't had any problems with valve stuck. It could be a problem, when you over tight them. Water amount in heating system is big, but the valve hole is small and it's not coming out very fast. You can also use screwdriver to close the valve.

so few likes for such a good video!

@3DPrintsBuilds

2 жыл бұрын

Thanks!

No audio for 1st 5 mins

@smashyrashy

Ай бұрын

Yeah it was probably removed for copyright

Hola, buen día, una pregunta, que impresora usas? Y que material de impresión?

@3DPrintsBuilds

2 жыл бұрын

In this video Creality Ender 3 V2 and PLA filament

@jefersonzapataramirez2882

2 жыл бұрын

@@3DPrintsBuilds ok, muchas gracias por responder ❤️👍✌️

Its ok if u need some not accurate work, or u just dont have time or opportunity to buy an instrument, but overall its waste of filament. Just think; How do u want to print and check a precise part if u do not fave a precise instrument to check the accuracy like a caliper, but if u fave a caliper u do not need to print one that will be for sure less accurate…

Paper cutter should be taking only one segment from the box cutter knife, it is poorly designed and wastes a lot of blade

Не понял со штангеном. Чувак не умеет им пользоваться? Предъявляет разные показания

You got an dislike because of the volume

срочно звоните доктору!

Pls add some music to your vid it’s so boring w/o it Music happened at the time of typing lol

I hate when videos have loud annoying intro music, for no reason.

@OxibanCraft

2 жыл бұрын

As there is nothing important to hear in this video, may I suggest you just mute the video instead?

@joshsabine219

2 жыл бұрын

@KwentiN I do, but when the loud music starts immediately it's hard to mute it. It's easier just to click 'don't recommend channel'. It'd be better if the audio levels were normalised or creators didn't just copy each other and did something original.

It's a shame that all the tools out there for printing are so stupid and useless. :(

useless stuff if you use good stainlessteel instruments. And hey without instruments you cant make postprocessing for 3d prints.

Вставка рекламы в ролики и впаривание всякой хрени - это неуважение своих подписчиков и гостей канала.Хватит воровать наше время! Дизлайк!!!

Useless