Probably the most useful 3D printed woodworking items I've seen yet. Nice, and thank you!

Great video. First time I’ve looked up 3D printing and wood working, and it wasn’t just painting holders. Thank you.

Love the pipe stand idea

Some great 3D tools to help in my shop! Thank you for posting the video and the links for the prints!

The feet for the camps is just fantastic. I don't have a 3d printer but, can crank out some on the bandsaw. Not sure why I never thought of this. Great idea!!!

Very good ideas, thank you for sharing!

Wow actually useful prints! This is great!!

Great ideas thanks for sharing

ALL good stuff!

This was GREAT!!!!!

Отличные приспособления! Спасибо автору за такие креативные идеи!

Ha! I just watched another of your videos and asked in the comments if you made other things with your 3D printer. Looks like you did. Great items. Just subscribed.

@ArtisanMade

4 ай бұрын

So many possibilities with the 3d printer. I have a few more of these videos coming out at some point this year.

I use 3d printer all the time working with wood. Its a game changer!

@ArtisanMade

3 ай бұрын

Completely agree.

Anyone mention you look a little like Liam Neeson- In his voice....." If you harm or fail to return my tools, nothing will stop me from finding you. Once I do, I will do the unimaginable.....I will take your tools and you will never see them again. LOL Great channel just subscribed - Mick

@ArtisanMade

3 ай бұрын

Haha!! I’m dying!!! I actually have been told that before.

@delxinogaming6046

3 ай бұрын

He does have ‘a very particular set of skills’

@tonycicciarelli2308

Күн бұрын

Great video, thank you! Not sure about the Liam Neeson as I was paying attention to the prints and not the artist, but I definitely heard Michael Rapaport 😂.

The best solution is always the easiest solution, and in that case I still would have made the clamp holders out of wood, but some great ideas here though :)

Awesome ideas. I bought my first 3d printer last June. I have 2 at my house and 1 at my shop. lol. Last 2 machines were free, I paid for 9 and 12 rolls (under $180 each) respectively of filaments and machines were free. 😊h 1. Ender 3 S1 new 2. Ender 3 Pro used 3. Ender 3 Original used All modded with linear rails and more.

@ArtisanMade

4 ай бұрын

The possibilities are endless!

I like everyting, but i see an upgrade potential and would like to share it. The sandpaper trays. You could print the grit numbers on the sides so you can sea what you need without having to guess whats what when they are stacked.

@ArtisanMade

3 ай бұрын

Thank you for sharing!

Love this channel for new ideas in the shop. Get some Weldon-16 for a better bond on your 3d printed parts - it sets up pretty quick and it holds well. There's some crazy layer lines on those prints... if you're ever going to do a print for display, you may want to do a tune-up on that awesome Bambu Lab.

@ArtisanMade

3 ай бұрын

Thanks for the tip. Just picked up some weld on 16. The prints with the layer lines were made on the ender 3. The bambù lab is new and pretty amazing. Time to throw away the ender.

@josephpk4878

3 ай бұрын

Get some glass syringes with stainless needles (16 gauge works well) - the stuff is messy and tends to just pour out of the tube. Dump your syringe and needle into a glass jar with a couple ounces of acetone, lay the needle down and suck some acetone into the syringe and leave it there till next use. When glueing, I also have a smaller jar of acetone that I can put the tip into between uses, as the glue will immediately start gobbing up on you - the acetone keeps things viscous and clean and the upright position of the syringe keeps the glue from oozong up the walls.

@ArtisanMade

3 ай бұрын

@@josephpk4878thanks for all the information. This should save me some time and money as I learn how to use this stuff. It sounds similar to an adhesive that I used many years ago on plexiglass. It seamed to fuse the plexiglass by melting it. Is it possible that this is the same stuff?

@josephpk4878

3 ай бұрын

@@ArtisanMade Not the same stuff - that stuff is super viscous and Weldon-16 is like a light syrup which takes a bit to work its way up a 16 gauge needle. It starts gumming up immediately and starts stringing when you're working with it, so you have to be efficient, That's why the extra jar with a bit of acetone is a good way to hold the syringe when not in use - the acetone keeps everything fluid and clean. Throw a little rag over the jar to keep the fumes back and to give a quick wipe of the needle when pulling it out.

@ArtisanMade

3 ай бұрын

@@josephpk4878 got it. Thank you again for all of the information. Super helpful!

Awesome Video! I was thinking of designing and printing a bar clamp lift when I was struggling with a recent glue-up, now all I have to do is print a few of these and I'll be good to go! What type of plastic did you use? PLA or ABS?

@ArtisanMade

4 ай бұрын

Thank you!! Petg

@wilmerwoodworks

4 ай бұрын

@@ArtisanMade Good to know!

Great! Thank you! What is the 3D printer you use? I am looking to invest in a 3D printer, but there so many out there. It takes too much time to evaluate each from reading each's descriptions. I am looking to make cases for things that I create.

@refixed

4 ай бұрын

Looks like he has the Bambu x1 carbon. I bought the same one last spring for a project, having no experience at all with 3d printing, but being fairly tech savvy. I use it semi regularly for little projects when I have time to sit down with Fusion 360 for a couple of hours, and I haven't had a single print fail yet -- it's been awesome, it's worth the money in my opinion. It's more or less marketed as the first real user-friendly printer.

@ArtisanMade

4 ай бұрын

I’m using bambu lab. I bought it in December. I originally started with the Ender three. That was an OK machine to introduce yourself to the 3-D printing world. If you are certain that you are going to be using a 3-D printer for some time, I would recommend buying a better quality machine. A lot of people use Prusa because they are very reliable. Recently, new companies have entered the market with more modern machines.that are much more user friendly The one that I have now is much faster and produces a great print quality. The only problem is that new products have not been tested over time and there is a much smaller community out there to help out when you have a problem. So far though my bambù printer resembles a Ferrari compared to the ender.

Any advice on the best filament material to use for these projects?

@ArtisanMade

20 күн бұрын

I’ve been using overture petg. It has been great. I buy it on Amazon

Where can you buy the 3D dewalt 90* and etc?

@ArtisanMade

3 ай бұрын

The file is free. Link is in the description.

@jmarcant616

3 ай бұрын

@@ArtisanMade I don’t have a 3D printer to use for the file. I was wondering where I could buy the items in your video.

What 3 d printer are you using

@ArtisanMade

4 ай бұрын

Bambu lab x1

What 3D printer do you use/recommend?

@ArtisanMade

4 ай бұрын

If you are just curious about 3d printers, I wouldn't spend a lot of money just yet. I was using the creality ender 3 v2. (under $300) It was a descent entry level machine. I learned a lot with it. I am now using Bambu Lab. You can get the P1P for $600. It is like a Ferrari compared to the ender. Much faster and great print quality, and many bells and whistles but, relatively new to the market so not time tested.

@aggyboy1580

4 ай бұрын

@@ArtisanMade awesome! Thanks for the detailed reply, and taking the time to do so!!! 👍🏼😊 Keep up the great content. 🫶🏼

3-D Prit some WOOD

@ArtisanMade

4 ай бұрын

I’m definitely going to try that.

All your stuff looks super annoying to print. Look some some DfM tips for printing. I tend to redesign anything with overhangs, bridges, or needing support.

@ArtisanMade

3 ай бұрын

Actually, they are very easy to print, but good luck with your redesigns.

@themontashu1

3 ай бұрын

@@ArtisanMade I do cad daily and am either running a mill or a printer. The clamp stands? Just I’ll in under, not hard, no luck required. Good luck with stuff that most Enders don’t like!

Selling them on Etsy? 😂 3D L