If you feel like tossing a buck into the beer fund because you found this video useful, go here: www.patreon.com/SimpleElectronics

@dibraniuk

4 жыл бұрын

ok may consider but you may need to decide between the adverts and patron ; will not effect my decision for now !

@puredesi6278

3 жыл бұрын

Brother In india mumbai where is *UNi-t* service center.. I have same clamp meter but its not working properly please reply if you have address

@Dog-whisperer7494

2 жыл бұрын

@@puredesi6278 China and Hong Kong.

Have this exact meter for a few years now and and as an electrical and electronics engineer I have found really useful and reliable. Just after I bought it I gave it to a friend who calibrates meters etc. for a living and straight out of the box it was almost perfect, in fact he was quite surprised as it stacked up against the FLUKE meters very well. It does seem well built and I have drop tested once or twice (not on purpose) and it still checks out fine. And if it's good enough for BIG CLIVE then it's surely good enough for me. Craig

@divingquokka

4 жыл бұрын

Great Scott has one as well. That's why I bought it :-) .

A very well presented and thorough review. Calm and collective.

Thanks for the review! Lots of good practical advice too.

The offset when you measure dc current comes from the earth's magnetic field, not from inductive pickup from nearby kit. As you pointed out, you need to zero this out before you measure dc current. The mistake you made, which might account for the difference in the reading between the two meters is that you altered the orientation of the clamp meter between zeroing it and clamping the wire. Once zeroed, it's important not to rotate or move the meter about.

very good review. ordered one!

WOW what a great video! thanks for the sweet information!

@JPhillips1Only

4 жыл бұрын

godless? :\

Great review, thanks!

Hello Friend, Thanks much for the review of UT210E. I was also puzzled at NCV and you cleared my thinking.I use UT210E for measuring DC Current and I get a quite accurate reading, like you did.Thanks again, for taking time to explain, teach and inform all of us, the salient features of UT210E.

@SimpleElectronics

7 жыл бұрын

Thanks for your comment!

Nice unit for the money, thank you for the review.

Thanks for the review. It is even better than what many people think because it reads true RMS instead of just average AC amps. technology to have these AC/DC reading is more expensive than just to measure AC amps. The price is very economical indeeed.

Well presented review.Thank you

great review

It's a handy and well priced unit - like you I wanted a small multimeter with a DC current clamp - I'm happy with it but it does function/read slower than my Fluke

Very helpful thanks!

Thanks, you just earned a subscriber

Good review, thank you for that! ... :)

Thanks for the review:-) Those from 2016 (like yours) should be far better then the older ones, as far as I know.

@SimpleElectronics

6 жыл бұрын

Yeah, so far this has been a great little unit

What I think is most impressive about the UT210E is the input protection. It seems like it’s CAT rating is accurate. I have never seen such a cheap meter with a huge section dedicated to MOVs and fat PTCs

I wonder if zero out feature works for ohm measurements as well. And non-contact volt detector with LED indicator works DC environment as well?

When I bought mine it was the only inecpensive clamp meter that did DC. There are a lot of AC only clamp meters out there aimed at three phase industrial guys for whom disconnecting a cable to insert an ameter is not an option. But if you are checking Battery banks, you also don't want to disturb well bolted down connections. A proper test should always be done with a calibrated multimeter, but for quickly testing a lot of thick wire in a fuse box this meter is really good and for the money it is excellent. ps . It defaults to AC because that's the primary use of these meters.

If anyone's wondering if this meter is sensitive enough to use to detect earth leakage current,then the following measurements I made might be of interest. AC current UT210E measurement 3 mA 0 4mA 0/1mA 5mA 2/3mA 6mA 4mA 7mA 5mA 8mA 6mA 9mA 7mA 10mA 8mA 11mA 8/9mA 12mA 10mA 13mA 11 mA 14mA 12mA 15mA 13/14mA 20mA 18mA 25mA 22/24mA

@procrastinator1842

Жыл бұрын

Is this with the probes or the clamp?? If it's the clamp...wow...very good.

@30mAkills

6 ай бұрын

I like this info

Great video junk from work sent me over subbed

Now,i understand,thank you very much for taking the time to answer me. Bye.Lucien

2-3 mA DC difference on your first test is coming probably from voltage drop caused by shunt resistance. If you leave both meters in circuit , you might get even better results/closer to each other.

@rolandberendonck3900

5 жыл бұрын

He did not zero the meter near the wire, which is recommended by the manufacturer which has a significant impact on the measuring result.

Wondering if it can measure inrush current.

Bought this last year....I am totally pleased with it. I used it everyday at work and it works better than my friend's klein tools clamp meter. Just bought another one now because I lost it :-(

@cfytcf

5 жыл бұрын

_"... it works better than my friend's klein tools clamp meter."_ _"... another one now because I lost it... "_ - I don't think you "lost" it. ;)

@7GIGEO7

2 жыл бұрын

@@cfytcf hahahaha, that cracked me up...

Thanks for sharing The clamp ammeter looks plenty accurate enough for circuit building too. Convenient not to have to switch the leads on the Fluke from Volts to Amps or Milli Amps or worry about blowing a fuse. Worth the $50

@SimpleElectronics

5 жыл бұрын

It does seem accurate up to date, it is a VERY nice little unit, especially for the price. In the end, I don't even need a +/- 10mA meter in clamp format but this thing is far more accurate than that

@liortech99

5 жыл бұрын

@@SimpleElectronics hi Thanks for this great review I'm interesting at buying a DC clamp meter, and i cant choose between the ut210e to the BSIDE ACM 91 Both pretty similar but both have their pros and cons I'll appreciate it if you can help me out which is the best one to go with, as i looking for the most useful & reliable one that will not failed after several years. For now I have the BSIDE adm 20 fo a while and I like it. Some of the uni-t pros against the BSIDE are; Diodes test( the BSIDE have a temperature instead) Looks slightly better instructed inside Much known company, but as my current adm20, usually you get more features with the unbranded like bside then unity ( which you pay more for the brand too) The uni-t cons \lacks( against the BSIDE are ) Looks slightly slower to reading values \boot\ switch modes Not looks that auto range at AC ( have some programs to choose from ) I dont know if i just imagine( according to the videos I've seen) or the lcd backlight is weaker Needs to turn The dial to Off position which is less instantly to boot and wear out more the dial over time..- but by the other hand , the BSIDE can be powered on accidently.. The ncv on the BSIDE looks more noticeable to my taste, and it have the live mode, which i don't know if and how useful it, but its a nice feature to have AND ONE OF THE MOST LIKELY part at the BSIDE, is the design, which you can hold in one hand with attached probe, looks comfortable to me.. Hope you can help me out which is the best one

@bobomomo3764

2 жыл бұрын

What do u guys think about kaiweets HT208D, is it better

@marcelomigueldasilva7444

10 ай бұрын

​@@liortech99bside não fabrica o acm91 e o ut210e é melhor disparadamente, além de ser tecnologia da uni-t

The description says it has a min max feature. Is this true and how is it activated

Thanks!

it is a great meter for small DC currents

That's called honest review thank you and godless

bro please tell me does it matter for separate dallier like in this meter has option 2A, 20A and 100A ? and many meters has only option like 1000 ad/dc amps. there is no short option like 2,20amps. so does these types(1000ac/dc) of meter are not more accurate in mili or short amps like 1,2amps ?

Uni-t it's one of the big rivals of Fluke in the world, possibly the best cust benefice of several brands, some of the big brands buy UNI-T and rebrand or ask to UNI-T made an especial model for them in their fabrics at China.

Bro plz can tell me in which cases the meter can be damage?? Like wrong selection of rotary switch? Does in such cases meter can be damaged if select the dial at diode registance and frequancy and measure the voltage and amps?

I did a review on one issue of these a few days ago in my channel too, I thought it wasn't too bad, pretty accurate, only thing I thought was a bit poor was input protection for the leads.

@SimpleElectronics

7 жыл бұрын

Yeah I certainly did not expect perfection for this price point, but it certainly does do a reasonable job for the price. thanks for your comment!

@jonathanwarner1844

6 жыл бұрын

The only reason to buy this is to measure DC current using the clamp in the 2 amp range. That's why I bought it - to measure charge currents in sealed lead acid battery chargers where inserting a meter in line seems to throw the delicate regulator circuit and make measurement impossible. So anything else is a bonus really. One bonus with this meter is the reasonably good sample rate. The other is True RMS.

@cbmech2563

5 жыл бұрын

My Craftsman version does 40 and 400 ac /DC. Does a good job on auto starters and alternators, on high it works well for heavy truck alternators and works for a good truck starter, if it goes out of limits it may have issues

A handy and reasonable priced DMM.

Very good video!!!! Like!!!

seems like something worth having in my box ..as an auto tech as well this would work great for checking current draw on charging and cranking systems as well as others .. I have amp clamps for my lab scope but I have to do the mV-amp conversion in my head which isn't hard but this seems way better..I don't even want it for the other stuff I only ever use the VDC function anyway as I scope almost everything else..think i'll be picking one up soon thanks for the input

@SimpleElectronics

6 жыл бұрын

Pick one up for sure, but it may be a bit low amperage for a cranking system, and even a bit for a charging system, if it's charging full pin. You can definitely check out alternator excitement current and parasitic draw though

@electronmarkboggess63

6 жыл бұрын

got it $16.00 shipped form ebay ..coming from china so it's gonna be a couple weeks lol

@electronmarkboggess63

6 жыл бұрын

And and yes did't realize it's only 100A when I wrote this but I'll still find good use for it !!

@SimpleElectronics

6 жыл бұрын

sweet! hope you like it! wish they would send me a commission lol

Bro in this meter u can measure Dc current without select the Dc option. I mean at Ac dial also. U can check it. Is this a fault??

Why you say in your description it is a good device to buy as a second device? I want to buy a multimeter for everything at the house, car and raspberry and I was thinking to buy a UT216C or UT216D as my primary device. Also is there anything to consider when using the probes for measurment, I mean someone was saying something that they are not protected?

Why is the live wire black?

its not calibreted iso or dakkS ?

Near contact voltage NCV works like a tick tracer

What is the difference between this UT210D and a UT210E?

I might have to get one of these. It has handy features.

@SimpleElectronics

7 жыл бұрын

it was quite worth the purchase, I must say.

@1pcfred

7 жыл бұрын

The UT210E does seem like a really nice meter for the money.

@SimpleElectronics

7 жыл бұрын

I can confirm that it really is. I have a tight "new tool" budget and do not regret this one bit.

@1pcfred

7 жыл бұрын

There's certainly times I could use inductive DC amps measurements. That's probably all I'd use that meter for. I got other meters to do all the other stuff already.

@SimpleElectronics

7 жыл бұрын

I get what you are saying but this meter is so tiny that I usually pop it in my pocket when I head out to fix a car. The most useful meter is the one you can keep nearby.

NCV is non contact voltage just like the pen you use to see if a wire is energized or not

Bro plz tell if v select the dial at continuty, diode (instead on voltage mode) and plug the probes in socket then what happen??

@LoanwordEggcorn

6 жыл бұрын

Depends on the design, but obviously it's best not to do that.

I have imported it in India in 3000/-.its just great

Please can you explain why you moved the clamp jaws to face in the correct direction? This was not made very clear in the video.

@SimpleElectronics

Жыл бұрын

The current can be read in either direction but if you go against the direction of the arrow, you get a negative value, just easier to show a positive value for the video - but it's the same thing.

Please make a review on Fluke 362. I want to know which one is better between the uni -T UT20E and Fluke 362. Thank you.

@SimpleElectronics

6 жыл бұрын

That would be an expensive review, but what I can tell you is this: the Fluke is definitely the better tool, they have a HUGE research and development department backing them and a reputation to match it. If you can afford the fluke, buy that, if you are mostly messing around or can't afford the Fluke, buy the Uni-T. Both those products are in completely different classes.

@X10anT

5 жыл бұрын

I can tell you is this: the Uni-T is definitely the better tool for milliamp range! Fluke 362 has a resolution of 0.1A, while UT210E has a resolution of 0.001A. If you can afford the fluke, buy the Uni-T and spend the rest of your money on Ebay.

hello, good video, can you tell me please can this meter measure say 6 DC amps or what is the max of DC amps it can do ?

@SimpleElectronics

6 жыл бұрын

100A would be the max

@nishantkundu6210

5 жыл бұрын

Both ac dc 100amp max.600v for both ac dc

What would you estimate the accuracy would be for measuring DC current around 2.5A would you trust it to measure accurately to within 100mA?

@SimpleElectronics

5 жыл бұрын

I would trust it to +/- 50 mA I'd say. I feel as though that's about right

@you_are_soul

5 жыл бұрын

@@SimpleElectronics I got it just for DC clamp Amps and it works well, however testing the probes with voltage read 53.4V where my Fluke 101 measured a more believable 53.8V when testing it on Volts so that's pretty disappointing. Maybe the Fluke is out but I don't think so.

@ChupoCro

Жыл бұрын

@@you_are_soul You are disappointed because voltage reading on a clamp meter is off by just 0.7% despite the main purpose of the device is measuring currents? Did you expect the voltage readings would be as accurate as when using an expensive multimeter?

5/300 = 16.6mA. The Uni T is closest!

I wasnt sure about my first meter purchase , this or a cheap multimeter like habotest ht118a . Thanks to your advice at the end I may buy a multimeter then a cheaper clamp meter , I need it for ac only anyway because I have appliances buring plug fuze all the time and I need capitance for my retro console repairs so that why I need a multimeter. A fluke seams overkill for my limited use.

I ordered UT203 but got UT210e instead, seems like a good clamp meter for it's price. Probably gonna order 203 again for that 400A range.

@SimpleElectronics

5 жыл бұрын

I truly love my UT210e .... I need to make a follow up video!

@cekpi7

5 жыл бұрын

@@SimpleElectronics I have been playing with it today and i like it. I found mod online so meter is default in DC mode and 2A mode is expanded up to 6000 counts. It's good enough but i ordered UT203 since 100A is not enough for high power stuff.

will it measure down to half an amp on DC? Or is it 2 amps and above? Cheers

@SimpleElectronics

2 жыл бұрын

It measures down to a few milliamps DC - it's quite impressive

@Do-iz6qd

2 жыл бұрын

@@SimpleElectronics Cheers, thanks for that...should be a good bit of kit once I get one and get used to it.

I need a clamp meter that can measure DC voltage 100mA - 5 Amps. Any recommendations? Under 100$

@SimpleElectronics

3 жыл бұрын

The UT210E does it!

@Skeptic2006

3 жыл бұрын

@@SimpleElectronics Yup, I just ordered the UT210E Pro from AliExpress for 33€. Not a bad price. I'm sure there is lots of wrong with it. That has been my experience with AliExpress stuff but if it can measure even remotely close the real amps I'm satisfied.

NCV is non contact voltage. Like a voltage tester

I have a fluke 115 fore 200 euro im thinking of buying this meter fore the dc clamp

My NCV detector seems to go off without any AC current, when I run it over almost any wall. At first I thought it was working okay, but I know for a fact where there are no wires in the wall and I'm still having it bleeping with 1-2 bars anywhere on any wall. Unless my entire wall is electrified this thing is useless.

I‘m kinda late to the party I know but there is a way to default this thing to dc when Dong current measurements. I think it’s in German but I can look it up

@SimpleElectronics

3 жыл бұрын

Yeah I have been told before, I'm just too chicken to risk my meter haha!

Can measure the leakage current with this?

@SimpleElectronics

4 жыл бұрын

It's a bit inaccurate in the mA range but better than nothing!

@mbaykal26

2 жыл бұрын

I wonder whether the meter can read leakage miliamps, with some inaccuracy it is accurate enough at least to diagnose the faulty circuit part!

can it possibly measure hvac capacitor?

@SimpleElectronics

7 жыл бұрын

I'm not sure if it can, and I don't have any kicking around to test

@superpooper_2030

6 жыл бұрын

Yeah, I use this uni t to measure capacitor from 1uF to 50uF. No problem pal

@joseantonioduysens4257

6 жыл бұрын

As I said previoulyCheck this video:kzread.info/dash/bejne/iWplm4-xd9vRfbQ.html(It's about UT210E)

@nishantkundu6210

5 жыл бұрын

May be no ...it's good for only 2 to 50mfd

Can I use this to just check a battery without connected to circuit ? There is no feature for that

@SimpleElectronics

4 жыл бұрын

You can check current to/from the battery without a physical connection yes! but not voltage!

@charlesdarwin6349

4 жыл бұрын

Simple Electronics actually someone else made a KZread video on it. Need a 100ohm resister to check voltage on bad batteries

@SimpleElectronics

4 жыл бұрын

not quite sure how that would work? If you put 100 ohms between the posts and check current, why not just probe the posts?

@charlesdarwin6349

4 жыл бұрын

Simple Electronics This video explains it. kzread.info/dash/bejne/epedzdyGd5rTfbg.html

@SimpleElectronics

4 жыл бұрын

Ah yeah, I thought you wanted it without a circuit connection but I understand you now, that;s a valid test

Uni-t are a good brand They have made a big inprestion in the UK and Europe, all my test instruments are uni-t Exsept for my MFT with ia a ROBIN KTS 1620, I have a uni-t clamp meter a uni-t voltage indicator and a uni-t multy meter I have been using this brend for seven years and I have never had any problems with them, why pay hundreds of pounds /dollars for the likes of fluke mega kewtech and many others when you can get just as good for a fraction of the price from UNI-T

This or Kaiweets HT208D ? Ur opinion will help thanks

@SimpleElectronics

2 жыл бұрын

Depends what you need it for

@bobomomo3764

2 жыл бұрын

@@SimpleElectronics Simple home and car diagnoses as a hobby and to help me diagnose car issues to save money in future so a decent accuracy is important i guess. 💛💛Thanks for ur reply and sharing ur knowledge

@SimpleElectronics

2 жыл бұрын

I would go 210e because of the super nice low range DC current - it will help you diagnose a parasitic draw.

Very similar to my Craftsman meter

@SimpleElectronics

5 жыл бұрын

There is really nothing wrong with these low cost meters, they are far more accurate than tools even 10 years ago!

What do you think of this meter? Would you buy one for roughly 50$ Canadian Pesos? Have you had one fail on you?

@wszczebrzeszyn

3 жыл бұрын

I'm from Poland and I've bought it for 164 PLN (42,58 USD at the moment) via Aliexpress and I'm very pleased with it so far. It is accurate for a meter this cheap and has many functions that aren't present in even much more expensive meters. Plus it's very handy, its small form makes it an ideal tool for transport.

Absolutely nothing wrong with Uni-T testers I have been using the brand for a good view years and never had any problems . In my opinion it just proves that spending big money on big brand names is pointless and a waste of money ,

Nice review What is CAT means?

@SimpleElectronics

6 жыл бұрын

Hey, it's a standardized way to measure how safe a meter is, in terms of input protection and resistance to catastrophic failure. Generally speaking, the higher the rating, the higher the voltages you can probe safely.

@nishantkundu6210

5 жыл бұрын

Cat means meauuuu...

@jimmybrad156

Ай бұрын

@@nishantkundu6210 meow*

does it works to measure leakage current?

@SimpleElectronics

3 жыл бұрын

It does measure down to a few milliamps for sure, less than that, no, it won't work.

If you need to check dc circuits and cannot access the wiring you can sample amps across the fuse. I have linked a reference chart. info.powerprobe.com/fusechartsdownload

Be Careful Some spec's sheets on the internet For the UT210E may show it has Hz & or Temp or both But at Uni-ti website it don't list HZ or Temp for the UT210E only for the UT210D So if you want Hz & Temp the 210E does not have www.uni-trend.com/productsdetail_1999_1111_1111.html

Is it True RMS?

@SimpleElectronics

4 жыл бұрын

Yes it is!

@RevScott

4 жыл бұрын

@@SimpleElectronics are you still happy with it?

@SimpleElectronics

4 жыл бұрын

Very much so! Still recommend them highly!

Hi teacher, first thanks for video. UNI-T ut256B Multimeter, is he good teacher and thanks

Wow $55 - I just bought this same meter new on ebay for $14.95 w/free shipping, difference must be the canadian import fees or something-??

@SimpleElectronics

6 жыл бұрын

Yeah, our dollar can be pretty worthless at times, but on top of that, I wanted to ensure I got a legitimate one. So I ordered it off of Amazon - which meant that I could return it if it was a fake. But yeah, we get the short end of the stick in Canada.

@yambo59

6 жыл бұрын

Yeah I talk to a RR worker in the UK who says its similar there with taxes and fees, damn shame. You make a good point on fakes, these days theres nothing that hasnt been hacked faked or somehow scammed. On the meter I was looking for a sub - $20 one for basic use and this one seemed to be a good option. Amazing the functionality and features you can get these days for just a few bucks, but ya do have to really read between the lines and check reviews. I live close to a Harbor Freight here in the US and its a real crapshoot shopping there, I often look at every example of an item on the shelf before selecting one - I like to say their stuff comes in "kit form'-lol-and you have to finish and Q.C. the assembly yourself for best result. There are some hidden jewels at HF but theres a lot of dodgy stuff as well, but lately theyve been upping their game and adding higher end brands with better quality for a bit more money and its working pretty well for them. The HF "Earthquake" air impact wrenches have really taken off as they have decent build quality and Snap-On tool company has taken them to court for daring to compare the two brands - but HF broke no laws and Snap-On lost their case, its been interesting to see their cocky CEO making snyde comments on camera, fact is theyre getting some decent low $$ competition and theyre not liking it--lol. Harbor Freight will never be Snap-On quality but the average guy doesnt need that level of tool, just a decent tool at a price thats not over-inflated. Best Wishes.

Some great info on modifying/hacking this meter at this forum thread www.eevblog.com/forum/testgear/a-look-at-the-uni-t-ut210e/

@SimpleElectronics

7 жыл бұрын

Thanks! I'll check it out!

I don't understand,the power supply is showing 2.2 amps,the meter is showing 0,561 milliamps ? so its not the same,(not even close) can you comment ? Bye.Lucien

@SimpleElectronics

5 жыл бұрын

Yeah no problem, the "power supply" is actually a hobby battery charger and it is outputting 2.2 Amps at 11.58 volts to an off-screen battery. The clamp meter is reading 0.561 Amps because the power supply (silver box on the left) is drawing 0.581 Amps from the wall outlet at 120 Volts AC - it is drawing roughly 60 Watts (120v * .5 Amps) so that the charger can deliver roughly 25 Watts (11.5 Volts * 2.2 Amps) to the battery in order to charge it. The meter is reading A/C input, whereas the charger is reading DC output

need for boat. can;t afford the $150-$300 meters.

@SimpleElectronics

6 жыл бұрын

It should work just fine for you, but as I can see that you are a business, perhaps spend the extra money on a waterproof meter instead? Water can be unforgiving on electronics. Otherwise, if you are careful, this meter is just fine. Happy Boating!

$6.99 including shipping on eBay but same item on ebay $39.99!!! Could tge cheaper one be a fake?

@SimpleElectronics

5 жыл бұрын

very likely fake, but you never know!

Always skeptical of "Made in China" products...

@user-os9qh6wg5r

Жыл бұрын

IPHONE made in China

hey guy, this is clamp meter, not a sex toy !

@SimpleElectronics

3 жыл бұрын

Why can't it be both?

@lefrankistanais161

3 жыл бұрын

@@SimpleElectronics this tool do the job for the price, i'm bought it and i'm glad.

testing a Cheap China Meter with a Cheap China meter WOW That's a REAL TEST!

@SimpleElectronics

6 жыл бұрын

Send me a better one and ill test it against it! ¯\_(ツ)_/¯

@joseantonioduysens4257

6 жыл бұрын

Well said, Simple Electronics. Recently I have seen a comparative UNI-T UT210E vs FLUKE 287, and it was impressive. The results obtained with the UNI-T were better than expected.kzread.info/dash/bejne/iWplm4-xd9vRfbQ.html

@LoanwordEggcorn

6 жыл бұрын

The measurement physics is, but they didn't have integrated circuits or printed circuit boards 100 years ago.

I hope I got a fake one. Worked fine the first 6 months with a dozen or so uses. Sat for most of a year and I get "ErrE" when I turned it on. Replaced batteries with no change. Tried to contact Uni-T and got no reply on 2 emails. Never again! Will replace it with a Fluke and chalk it up to trying to save a few bucks. No more Uni-T for me, ever.

@byAnArgentinian

6 жыл бұрын

Same here with UNI-t 139C. I think it's an EEPROM problem. If i can get the original EEPROM dump, I can reprogram it.

@AutoCrete

6 жыл бұрын

I'm just going with Fluke. Costs twice as much but at least I'll get something for my money unlike UNI-T. You can fleece a sheep every year but you only skin it once.

@nishantkundu6210

5 жыл бұрын

Fluke is father of all multimeter.its industrial meter safe for user even a dog can use it.

WHY? :)

Shear luck whether the meter lasts more than used once then zero. Checked DC amps on the charger to a car battery then next time zero. In other words the quality is crap.

Interesting you use a $30 meter to test a $50 meter and assume that the $30 can be trusted more as the reference. And yet expect to have to send back the more expensive Uni-T. Price is not an indicator of quality or accuracy but certainly all the brands mentioned have credibility. As indicators all three would seem to be trustworthy. If you'd referenced your readings using the fluke I'd be more inclined to believe your arguments but if you assume that both the $30 meters were made on the same production line and calibrated on the same test rig, it's no surprise they are within a couple of mA ... you have no grounds to assume that two identical meters giving identical results means anything at all with regard to their accuracy. As they stand you could only class them as indicators. Ohms law isn't rocket science - you could so easily have tested round a simple battery and lamp circuit to prove pretty conclusively the accuracy of all the kit. You don't need fancy kit to get acceptable accuracy.

you got fake ones

@dangoneau

7 жыл бұрын

Nope, it is legit, what makes you think its fake?

@SimpleElectronics

7 жыл бұрын

I'm pretty confident it is a real one, what are the signs of a fake one?

I think that yours Ut210 is more accurate than your crapy dmms ✌️

@SimpleElectronics

7 жыл бұрын

well that's a tough call, I really don't have anything fancy to compare with, but really, a few millivolts/milliamps is nothing for a hobbyist to worry about, nor is it for a professional automotive technician, like me. If I really need to check accuracy ill get a calibrated voltage source and high accuracy resistors and we'll have some fun lol.

you bought over price things.

you should delete this video; if you don't know what NCV stands for you should not review meters

Thanks!