Not sure about this one, looks a bit function over form to me, perhaps a little sympathetic embellishment might help. However, let’s not forget it’s your bike not mine.

Good job on the piece. You should send that off to TEC Bike Parts for some R&D money for making a piece that could go with their exhaust system. I’m sure they could do something for your work.

@Moonfleet41

Жыл бұрын

Good plan, but somehow as TEC develop their own parts, am sure design isn't the issue, it's more about keeping the price of the exhaust system kit down so it's affordable... but it's a good thought for sure!

Good job, much better than original. I do like the silvery look, but would consider putting holes like the rest of the exhaust and mainfold after a good night's sleep. Anyway, it's easier to put holes in than to cover up unwanted holes afterwards ;-) Cheers, Günter/Nürnberg

Wow! It looked a little sketchy when you started. But the finished product is very nice. Nicely done! Nicely done!

This is the design flaw of the Triumph scramblers, heat from the pipes is overwhelming on a long journey, so theres no choice, a heat shield is a must unless you only do short rides, good job! I wonder if the pipes were split and on both sides if heat would have dissipated better, 🤷🏻‍♂️ just a thought

@Moonfleet41

8 ай бұрын

That's a good thought, but I guess high level pipes are always on the one side only...

Its a no from me, while I can appreciate the workmanship, I can never understand why anyone would move away from the "shot gun" style exhaust on the 1200 scrambler. Ok the stock one is a little muted, and lardy, but there are other options available and for me its part of the unique look of the 1200. Each to their own.

@ukrider3222

Жыл бұрын

Took the words out my mouth. Honestly nice job on the new one but I prefer the old.

@Desmo904

Жыл бұрын

2 into 2 options are really expensive though. A set of Zard's is around $1000-1500. The TEC 2-1 is around $220.

That’s look nice! I see a lot sheetmetall work, maybe a project with making your own carbon parts? The bike is 😎

Looks a bit home made to me sorry. Just trying to work out why my head thinks that. Maybe a bit long at the end, maybe a bit too rectangular, maybe a bit plain next to the other shields with their intricate cutouts? Amazing shaping though and good idea, the stock one with the Tec pipes looks wrong.

Put some holes in it to match those around it and you've nailed it. Good watch as always 👍

I am sorry but somethings should be left well alone. Original exhaust and heat shield looked so much nicer, in my opinion. But each to their own.👍

@Moonfleet41

Жыл бұрын

Once again, there's no need to apologise for your opinion, design is subjective after all !

Nice work! Works much better along with the modified exhaust than the stock heat shield. 👍

Very nice and I do like it very much. However I would think it should look like the rest of them with the vents to make it all matching. Like what you have done before. But again looks very good. 👌

Looks brilliant Del. I like the way it matches in with the heat shield towards the front of the system. Superb job!!

@Moonfleet41

Жыл бұрын

Thanks mate..👍

I love it the thing that stops me buying the same exhaust is it Makes ✌️👍the cover plate look weird

You've hit the big time when an unpainted piece turns out flawless like that Del. Beautiful work and it looks right in place with the shield on the forward part of the exhaust. I'm guessing that fab work is one of your favorite parts of a build and the results really show it. Big thanks to you and Penny for all the time and effort you pour into these videos. Much appreciated my friends. God bless and stay safe. ❤👍👍

@Moonfleet41

Жыл бұрын

Thank you Rick, I think underpinning it all is the pride in having something on your bike that nobody else has and that you made with your own hands, and if it can be close to factory quality then, perhaps, that's an achievement... have a great week Sir, and stay in touch, D&Px

Very nice! Much more subtle and streamline than that big gaudy stock shield. Nice work!

Another great video brother ! such a great custom work 🤙 I remember when you first got the english wheel, now you know your way around it ! Came out awesome! keep up the great work brother! Stay safe guys cheers from New york !!! 🎉🎉🎉

Nice! Now just machine some fancy HoneyComb patter holes in it and make it even cooler looking!

Del, you did some fine fab work, and the new heat shield looks great, but I LIKED the ugly stock number plate! If everybody got rid of all their ugly possessions, my mom would have tossed me in the bin on Day 1! Ugly objects need love too! :)

@Moonfleet41

Жыл бұрын

Post of the day Sir, now I have tea on my laptop!

This is why I subscribe to your channel. If not making it look so easy, you at least give us DIY'ers the motivation and inspiration to truly do it ourselves. Great job, looks so much sleeker and nicer than the OEM heat shield.

@Moonfleet41

Жыл бұрын

Thank you buddy, that's appreciated very much.

Sorry, but I don't like it. I think it would look much better If it look like an extension to the black one. To me, it looks too much like a homemade add-on. You do great custom work, so I think you can do better with this one. Keep up the good work.

@Moonfleet41

Жыл бұрын

Don't feel you have to apologise for your opinion mate, Design is always subjective !

Very nice result buddy. Getting the tight radius on the edge is impressive. Your English wheel skills are really improving, not that I can judge with very limited experience. But I see you moving on and up! Peace and love to you both of ✌️❤️🤗

@Moonfleet41

Жыл бұрын

Thanks buddy👍, lots of fun practicing with the old school tools, and like all these things, every time it gets a bit easier.. Thank you as always for your loyal support bruv.. keep safe aye.. D&Pxx

Those rolled edges, fantastic! Great to see the maintaining of tin bending skills, for sure, wow. The new outline is also much more svelte and purposeful looking, than an odd shaped thing pretending to mimic a number plate.😎

@Moonfleet41

Жыл бұрын

Thank you so much 😀, it was a bit clumsy looking aye !

That is a HUGE improvement! Nice work, Del 👍

@Moonfleet41

Жыл бұрын

Thank you Keith 👍, appreciate your kind words, hoping you're ok, please stay in touch.

Pretty neat interpretation. Like the minimalist approach. Looks more part of the bike rather than a glued on “universal fit” option. Congrats.

@Moonfleet41

Жыл бұрын

Thank you Sir, am quite happy with it, if I get some time I may slot it with some mesh behind later on to match the front shield! Just wanted a quick solution for now.

Wow I am quite impress. I have to admit you nailed it big this time. Your skill and design have improve dramatically. Keep up the excellent work. René from Québec Canada.

@Moonfleet41

Жыл бұрын

Thank you so much for such kind words René 😀

Looks way better! what about a grill finish like the stock heat shield? i know it won't be easy but it could be the crown jewel.

What a pleasure to see how you gained full control of the English wheel. And the choice not to make holes is an interesting and surprising choice, I think it turned out very cool.

Great video as always, love seeing your ideas, Big question is are we going to get anymore question times with Mr Dyson, not been one for a long time also anymore FRO vlogs used to love those rants :) Keep up the good work

Nice! Looks great! Thanks for the video.

@Moonfleet41

Жыл бұрын

Thanks for watching James, good to hear you enjoyed it!

@jamesmccreadie5959

Жыл бұрын

@@Moonfleet41 sorry Del. The bike looked fine on the stand. It must have been camera distorting it or life distorting my mood maybe! Anyway my apologies for my misjudgment and no hard feelings I hope.

@Moonfleet41

Жыл бұрын

Hi James, do you have two channels here buddy, or have you been hacked?

@jamesmccreadie5959

Жыл бұрын

@@Moonfleet41 no but it’s the first time I’ve replied and logged on with my phone. Maybe it’s used a different email address to log in.

Great video, Penny and Del. Really nice job on fabbing that beautiful piece. It looks much better than the stock part. Thanks so much for sharing! Take care, be well and ride safe!

@Moonfleet41

Жыл бұрын

Thank you very much, we both really appreciate your very kind words and support... have a wonderful rest of the week and ride safe there! D&Px

You really know your way around that English Wheel, Del! If I had tried doing it, I think mine would have ended up looking more like another bedpan for the MIL. Hope you both are doing ok there! 🏍👍🏍

@Moonfleet41

Жыл бұрын

ha ha.. i can knock you up a couple of you need them.. but maybe in 316 stainless, you know how corrosive it gets on the old MILs..!

@garya3056

Жыл бұрын

@@Moonfleet41 LOL- thanks a bunch, my friend! We’re trying to get her to stop using the hedges in the front garden… it scares the neighborhood children quite a bit, you know? 😎

A lot better flow than the original. Good job 😎🍻

@Moonfleet41

Жыл бұрын

Thank you Dave

If you can take orders from us that will be much better. :) :)

I can’t help thinking it would look better with some holes in it .for a works look.

Great piece of fabrication, it looks great how it matches the front part and looks like it was there from the start👍

@Moonfleet41

Жыл бұрын

Thanks Mark 👍

Like it. I would have used aluminium… but good result. I need something similar for my mass exhaust. An extension, since I have burned my pants several times…

Very smart Del Lovely little upgrade Nick Australia

@Moonfleet41

Жыл бұрын

Thanks Nick, glad you like it mate!

Blends in nicely, well done. Now time for the pair of you to enjoy a beer & chocs together.

@Moonfleet41

Жыл бұрын

Sure is buddy.. have a good one yourself..

What a fantastic improvement over the original, lovely bit of fabrication. Perhaps not as polished as some factory options but a really nice piece of personalised design.

@Moonfleet41

Жыл бұрын

Many thanks Andy, i, glad you approve.. have a great week sir..

Two thumbs up! Well done!

@Moonfleet41

Жыл бұрын

Many thanks mate!

Great improvement Del! Makes it look and flow so much better. Well done.

@Moonfleet41

Жыл бұрын

Thanks Shaun👍, glad you like it!

Now I like that, massive improvement on the factory version, good job as usual, 👍👍👍👍👍👍👍👍

@Moonfleet41

Жыл бұрын

Thanks Pete! 👍

Yeah, liking the look of that, good work !

@Moonfleet41

Жыл бұрын

Thanks 👍

Now, let's Crack On! Proper Bad A$$ mod where ever you're running. Looks great. Take care and Ride Safe. ( American trying to sound British, sorry, Haha)

You win! That's what it should look like from the factory. Awesome work!👍💪

@Moonfleet41

Жыл бұрын

Thanks mate👍

I think it looks way better than the OE one! Good job! Great to hear the old tracks back too!! Need to bring them back !!

@Moonfleet41

Жыл бұрын

Thanks buddy, that is the plan, a little royalty free music now and again, why not!

Nicely done sir! . . what's very English, somewhat vocal & has a new set of weals? - the edge of a freshly rolled thumb : )xx

@Moonfleet41

Жыл бұрын

Ha ha, you said that right.

I must admit that looks better in my opinion. Great touch

@Moonfleet41

Жыл бұрын

Thanks Andy 👍

Great Video a lot more pleasing to the eye Great job Del 💯👏👌👍🥃

@Moonfleet41

Жыл бұрын

Glad you enjoyed it Chris, thanks for your kind words!

Nice bit of fabrication, great job Del.

@Moonfleet41

Жыл бұрын

Thanks Mark. 👍

Really nice job. The channel you pressed and the rolled edge look quality imo. ❤️🤘

@Moonfleet41

Жыл бұрын

Thank you, I appreciate that!

A beautiful piece of work Del - a vast improvement on the original!

@Moonfleet41

Жыл бұрын

Thanks so much for your kind words buddy.. hope you're well .

Great job Del.. looks brill dude :)

@Moonfleet41

Жыл бұрын

Thank you Pete!

He did the magic....and the huge shield disappeared, wow, better than David Copperfield!

Amazing work looks great

Excellent job Del, looks just like a bought one mate. Penny and you enjoy the last part of your week. Cheers

@Moonfleet41

Жыл бұрын

Thanks mate👍, glad you approve, it was fun to make it with the old school tools.. ! take care and enjoy your week too. D&Px

Nice work. It looks so much better. Alan

@Moonfleet41

Жыл бұрын

Thank you very much!

👍 cada vez melhor Del. fico feliz com a tua evoluçao.

@Moonfleet41

Жыл бұрын

Thank you.

Well, someone's been practicing on the wheeling machine! That turned out great.

@Moonfleet41

Жыл бұрын

Thanks Travis 👍, very kind of you.

Whats my line 😀 Certainly does, simplicity that's the key. Why do people over complicate things when simplicity works every time! Great result, Del x

@Moonfleet41

Жыл бұрын

Exactly mate...K.I.S.S.. aye ?

well done that looks much better and welcome back to the music

@Moonfleet41

Жыл бұрын

Thank you Mike, always good to hear from you mate.

A marked improvement on the stock one mate. I popped a paper bag on the wife's head today, also a marked improvement.... winner winner chicken dinner!!!!

@Moonfleet41

Жыл бұрын

... shots fired lol

Yet again, nice 👍

Nicely Done !

@Moonfleet41

Жыл бұрын

Thanks!

Good work Bruv! Looks awesome! 🤘🏻😃🤘🏻

@Moonfleet41

Жыл бұрын

Thanks Bruv.. 🤙 Glad you approve. !

Now, I’m in two minds weather it stays solid like it is, or have holes drilled in like the original one, I honestly can’t decide

A J W D My friend!

SO much better looking! Hope you and Miss Penny are doing great. Until next time...

@Moonfleet41

Жыл бұрын

Thank you brother, we're good, hope you both are too and enjoying some Spring weather over there in AZ!

@DrRockter5150

Жыл бұрын

@@Moonfleet41 Snowing this week! I'm ready for some warmer weather.

MUCH better! Congrats.

Good job havn't heard that tune in along time 👏👏

Very very nice work Del! I love the extra bend on the edge. Haters be hating man keep doing you!

@Moonfleet41

Жыл бұрын

Thanks Paul👍, im glad you like it mate..

Clean work man

Good job better than others one 👏👍

That is a thing of beauty Del, much like the white board comments, loving it. Take care you both.

@Moonfleet41

Жыл бұрын

Thanks buddy.. glad you enjoy it.

I would by one

Great job and so mutch better looking......

@Moonfleet41

Жыл бұрын

Thanks 👍

Looks brilliant mate! Good to see you on the English wheel again too

@Moonfleet41

Жыл бұрын

Thanks buddy, my favourite past time!

Well executed👏

Yer I like it,and as usual great fabrication techniques👌❤️

@Moonfleet41

Жыл бұрын

Thank you very much!

wowwwww Nice work!!!!! Excellent!!!!!

Really looks the business Del👍

@Moonfleet41

Жыл бұрын

Thanks mate, glad you enjoyed!

very nice Del 👍

@Moonfleet41

Жыл бұрын

Thanks Paul 👍

WOW

That is an excellent change over from just a price of steel to the end product,only wish I had half your skills and I'd be OK,Take care Del

Dope

Great job Del 👏

@Moonfleet41

Жыл бұрын

Thanks 👍

Like that Del.

That look awesome!

Nice finish

Zen and the art of motorcycle maintenance. 🪷