Comment below what your favourite modification was on this SQ5! OBDEleven: obdeleven.com?aff=1175& Code: NEED4BUILT10 Check out Draggy: dragymotorsports.com/?rfsn=7169984.22fb2bc Code: NEED4BUILT10

@krrhys

3 ай бұрын

What would be interesting (unless I missed it) is how much these mods cost altogether with and without the normal labour charges.

@Need4Built

3 ай бұрын

@@krrhys 12,000$. It’s in the thumbnail?

@krrhys

3 ай бұрын

@@Need4Built sorry, clearly I’m a fucking idiot lol. Great video chaps.

@Need4Built

3 ай бұрын

@@krrhys haha no worries. Thanks for watching!

@damianb5099

3 ай бұрын

Hey I tried to get the draggy with the code but it’s invalid it says

Thank you, David, for all the hard work; this feels like a totally different SUV. The TTE810 made all the difference! I find myself looking to race every time I take it for a drive. Power is addicting and I want more!!! Anyone looking to mod their B9 SQ5, there's no better than David. So, don't wait any longer, it'll change your life.

@Need4Built

3 ай бұрын

I’m super glad you love it! An additional 300hp on top of already a ton of power is no joke 💪🏻 sounds like we might need to do part 2 soon. Hope to see more Audi/vw owners show up at my place for mods!

@EXERGAMING

3 ай бұрын

how much was it? im guessing 15-20k

@Need4Built

3 ай бұрын

@@EXERGAMING well, right around 12k actually.🙂 other mods would probably add up to 15k.

@EXERGAMING

3 ай бұрын

thats not even too bad@@Need4Built

@lakshya7873

3 ай бұрын

you can cut out the grey part on the front grille or change it to that rs grille for the best cooling

Straight up sleeper

@Need4Built

3 ай бұрын

Ain’t no one expect an SUV to absolutely demolish them from a dig. 2.9s 0-60mph full weight in an suv is ballsy.

@syntrexhd8523

3 ай бұрын

LOL its Not a sleeper with 450 hp Factory 😅

@patrykrudzinski3314

3 ай бұрын

Factory? ​@@syntrexhd8523

@Need4Built

3 ай бұрын

@@syntrexhd8523 It’s comes with 350HP from the factory. Stage 2 bumps it up around 470HP. And if it still looks DEAD stock which it does with the Oem rims and exterior.. it’s a sleeper. But now it’s a sleeper with 750HP+

@syntrexhd8523

3 ай бұрын

@@Need4Built man im jealous I want to do that in Germany to… but Germany most of Tuning is illegal… 🥲

2.90 on a cold surface. It probably does even better with proper suspension and tires. Either way, that’s the perfect sleeping SUV!

@Need4Built

3 ай бұрын

We might try that with some proper drag radials and a prepped surface in part 2 👀 My personal SQ5 is cutting 2.4/2.5s 0-60, so I’m sure I can do the same with this SQ5 as well.

@Views965

3 ай бұрын

I think you can do it! This is the perfect set up for fun and comfort.

the downpipe on that thing looks insane! really cool to see the upgraded turbo and how they machined it

@Need4Built

3 ай бұрын

6in downpipe. Audi design special. Let me know if you think I should do a part 2 on this sq5

As a previous Q5 owner.... 12k in mods now 10+k in future repairs and maintenance

@Need4Built

3 ай бұрын

Thankfully we did the maintenance while we were in there 😄 good for another 50k miles

@Rey2018SQ5

3 ай бұрын

That’s kind of average for car maintenance these days?

@Need4Built

3 ай бұрын

@@Rey2018SQ5 right? 😅 every 50-60k miles major maintenance is a thing.

@mxerb5912

3 ай бұрын

Aren’t these ticking time bombs in stock form?😂

@Rey2018SQ5

3 ай бұрын

@@mxerb5912 well, anything mechanical will eventually breakdown. C’est la vie, n’est-ce pas?

Fair play to you, brother. Solid work done on that Audi - I can always tell when the person talking about/working on cars is actually passionate about them, it makes a massive difference. You’re doing this from a casual garage guy with limited equipment and you’re a likeable character too. Your channel is guaranteed to grow. You’ve got a character that feels similar to watching a Mat Armstrong or Tavarish , remember this when you’re chasing down the million subs!

@Need4Built

3 ай бұрын

I love this stuff. It’s just incredible. Very happy that translates/shows on camera and in my content. Just another guy with a small garage, zero budget or money😂, little bit of knowledge/tools, but a huge passion for cars. I sincerely appreciate your kind words. Comments like these keep me going when I grow tired of editing, scripting, filming, etc. I hope to see more of your comments as I climb the Everest of KZread!

Judging by the poor maintenance of that car, ie… motor mounts, water pump, and how dark that oil was, engine blown within a month. But, it looked like fun for you! Great vid!

@romain5356

3 ай бұрын

you mad you roll in a prius

@walterhahn4130

3 ай бұрын

@@romain5356 maybe you “roll” your Prius, but if I had one it would run. You’re the guy that asks, what’s the cheapest tires I can get. The guy with the Attuto sale bin tires . The guy who buys recycled oil and chops the muffler out of his car, and calls it a cat-back. Yea, we all know you. Buys a 10 year old Benz with 150k miles, puts a subwoofer in and buys EBay no name rims. We know you well. You use plasti-coat & plastic-dip like you use axe body spray. Yea, the Army is hiring now, no GED required.

@lnoastaroth8360

3 ай бұрын

@@walterhahn4130 this is the most awful cook i've ever seen. Shame on you

@Need4Built

3 ай бұрын

It’s already been running perfectly for almost 3 months. It’s called maintenance which I’m happy I got too before anything catastrophic failed.

@toddsmith8608

Ай бұрын

​@Need4Built man, that's how you know you got a good channel with solid content... the haters really start coming out.

This channel is literally the reason I purchased my b9 sq5😭

@Need4Built

3 ай бұрын

Let’s goo!! I’m happy I can influence others to get into these amazing SUV’s!

Nice vid, great performance and top angles from FPV

@Need4Built

3 ай бұрын

Doing the best I can with what I have. Thanks for the supportive feedback! Comments like these keep me going

Mark my words, U guys are gonna go far with this content, loved every second of it, feels like i've watched a movie. Best of luck

@Need4Built

3 ай бұрын

Thanks for enjoying man! I’m hoping to keep hustling awesome content out and grow the channel!

@MRWheelly

3 ай бұрын

​@@Need4Built keep up my G

Editing its on another level with other building content, looking for an SQ5 to replace my 8V S3 now, your channel is trully a reference for my future mods

@Need4Built

3 ай бұрын

I need an S3 in my driveway just for you. I’ll keep it up with the editing. Just for reference.. 30+ hours of labor and 30 hours of editing 🥴

@toddsmith8608

Ай бұрын

Drone footage is pretty sweet as well.

Wow! Insane build! You guys are badass!

@Need4Built

3 ай бұрын

Thanks for watching! Working on producing more similar transformations!

Wow first time I see one of these torn into. I can’t believe they have the exhaust on the inside. That’s so cool!

@Need4Built

3 ай бұрын

Yeah the hot V Audi design is interesting.

Man this was sick!!! Loved it. and As someone researching B9s, it was good to learn about the vacuum system/ coolant pump failure connection! Thank you! Keep up the great work dude! BTW- what did you do that your toolbox tipped over?!? I know you had a deadline with this car but man if it were my toolbox I would have went inside for a beer and called it a "problem for tomorrow" lol!

@Need4Built

3 ай бұрын

hahahah I should've included more footage on that accident happening. Too many shelves open at once. Had to get it done.

Well done bro great watch, id would-be good to see you do an injector upgrade video once 034 drops new injectors (in more detail), want to try my hand at doing these myself think it could be fun haha!

@Need4Built

3 ай бұрын

Work in progress 🏎️

It's sad we don't have people like you in my country. Imma sub, loved the work!

@Need4Built

3 ай бұрын

Thanks for subbing !

Fellow Audi owner and Washingtonian - now a subscriber. Great vid 🌲🌲

@Need4Built

3 ай бұрын

Let’s goooo! Thanks bro!

Just got recommended your channel , like what I see so far and subscribed to your channel and like that you actually respond to your viewers even though the video is two weeks old

@Need4Built

3 ай бұрын

Thank you for subscribing and leaving a become comment. Every subscriber counts and every comment counts. I think interacting with my viewers is the best way to connect with the audience watching me. 💪🏻

Very nice and impressive setup. Audi SQ5 3.0 V6 Stage 3 turbo to 750hp, 2.9s 0-60mph !!!!

@Need4Built

2 ай бұрын

Maybe we can get her closer to 2.7’s 😃

Great video, love watching your channel to plan out my future build on my b9 s5 coupe. Keep up the great work!

@Need4Built

3 ай бұрын

Thanks for the support my man!

That down pipe is massive. I'm running one of those stock sq5 turbo's on a alh tdi it's mounted to the factory tdi manifold and converted over to vacuum actuated vane system.

@Need4Built

3 ай бұрын

6in down pipe

@boostedtdis

3 ай бұрын

@@Need4Built damn hell yea I'm gonna have to step mine up lol

Good stuff bro! I’m pretty sure I spotted you on 167 today, your sq5 looks clean, like the sleeper look. I just picked up a q7 and thinking of doing some modifications as well, wake up the 3.0 up a bit😅 Keep up the content!

@Need4Built

2 ай бұрын

Hahaha let’s go!!

Been seeing your videos recently. Seems like a really slept on creator rn for the quality work you put out.

@Need4Built

2 ай бұрын

Comments like this keep me going. I’m going to keep up the high quality production standards.

Really solid video, and very impressive car. Can't imagine what it could do on decent tyres.

@Need4Built

2 ай бұрын

Part 2 incoming

Awesome transform! Oddly enough this is year, color, and optioned same as my SQ5 lol. Had it for 6 months now still stock, love it!

@Rey2018SQ5

2 ай бұрын

You planning on modding it? Because honestly, it’s like driving a 21:39 corolla vs. a supra; or something like that. It’ll change your life…YOLO

@Need4Built

2 ай бұрын

Modify that beauty ! 👀

Great project. One tip: I am missing the treble during the in-car pulls, which means the turbo and blowoff were mostly heard on the exterior camera shots.

@Need4Built

3 ай бұрын

The turbo is actually very loud inside the car even. I have had a hard time adjusting with mic settings to capture how loud the turbo is inside or outside.

That turbo whistle crazy

@Need4Built

3 ай бұрын

It sounds even more insane in person. Camera cant capture it or do the justice.

Insane build ❤❤

@Need4Built

3 ай бұрын

Glad you enjoyed it!! Hope to see you watch more of my content!

You guys are awesome... It was so detailed when it came to seeing all the mods...

@Need4Built

3 күн бұрын

Thank you! Doing my best with what I got 😁

when i was seeing the video i thought you had waaaay more suscribers than you do, the editing of this videos is crazy!!! keep it up bro

@Need4Built

3 ай бұрын

Insane behind the scenes effort to make it happen. I’m happy that shows in the content. Thank you for your support and kind words! Keeps me going

Really nice car! Would definitely throw a rear bumper of an ABT sq5 for those visual exhausttips

@Need4Built

3 ай бұрын

Those bumpers be expensive 🤣

Always nice to see super high production value on much too small channels. That problem will be fixed in no time at this rate though.

@Need4Built

7 күн бұрын

Gotta keep doing what I can to grow the channel! Thanks for appreciating that effort

Yo! Great video! I have all the same mods being thrown in now, with the addition of the 034Motorsport forged bottom end package! Oh I can't wait. I also already have water-meth on a Pure700 (waiting for my TTE810 to come in). I was at 683HP 546AWHP/ 626AWTQ. Hoping to catch another 100HP! Great video! 👍🏾 2021 Q7 4M.5 3.0T EA839

@Need4Built

3 ай бұрын

I need to get on that bottom end package 100%

@irvinfitzgerald9778

3 ай бұрын

My Pauter Rods are being delivered any moment. I can finally get this stuff to the machine shop and get honed! It feels like forever!

This is alot of bang for the buck expecially considering, you can find these sq5s for under 30k and $12k in mods you have 1 ultimate sleeper, 2 ultimate daily, 3 faster than 90% of sports cars on the streets. I've personally been in a 2016 stage 3 SQ5 and I will say they are fast as fuck, to the point I genuinely got scared lmfao. I remember my friend launching the SQ5 and all 4 just spinning and hooking, insane feeling. Mind you I've been in 1000hp cars.

@Need4Built

3 ай бұрын

It’s insane that these cars can push nearly 700whp on basic bolt on’s while being in a completely lower category in price alone than most “tunable” vehicles on the market while maintain luxury and reliability.

@bayharborbutcher8132

3 ай бұрын

They''re not very reliable though and expensive to service..

@Rey2018SQ5

3 ай бұрын

Relatively reliable; my 2013 A4 had 184K miles without major issues really.

@glareicebutts1423

19 күн бұрын

@@Rey2018SQ5that’s a completely different motor isn’t it? 😂

Dude new to the channel big ups to you… that 0-60 after buddy got out, I couldn’t stop repeating WTFFF rip my love for my b8.5 sq5 :( haha

@Need4Built

3 ай бұрын

I need to build a b8.5 sq5 and try to get it close to my B9 SQ5. My personal SQ5 does 2.7s 0-60mph on the street on 22's making the same power simply due to being on coilovers vs oem bags. Let me know if you think I should do part 2 on this SQ5 however.

for the future, when you have coolant migration you also replace the vacuum pump, vacuum lines and the vacuum reservoir. if its bad enough where coolant is exiting the solenoid you gotta replace everything. you were right there with the reservoir too when doing the motor mounts. i actually have an sq5 with coolant migration in my bay as i type this on my lunch.

@Need4Built

2 ай бұрын

Duly noted

You guys need more subscribers, that build is wild

@Need4Built

Ай бұрын

Working on it bro! one video at a time.

you kinda remind me of vitaly if he didn’t do drugs

@Need4Built

3 ай бұрын

The amount of times I’ve heard this over the last few years has been insane. It’s sad how he fell off with drugs man..

@jetster65

Ай бұрын

@@Need4Built so i was on point then😂 but yeah sad, he seems aite now but it’ll never be the same

Seen your page just pop up & i decided to subscribe & am watching live from New York City with ❤️

@Need4Built

3 ай бұрын

Thanks for subscribing! I won’t disappoint with the content

i saw this exact car pull up to an xsport, sounds amazing

@Need4Built

3 ай бұрын

They do got a rumble

I love your work you remind me of those old school russian guys fixing euro cars no one wants touch lol i am not a hater or anything but damn that audi had a bunch of stock parts busted. Engine mounts coolant lines busted turbo fins wet spark plugs. I do doordash full time and my nissan has done 60k miles in one year no issues. I change oil every 30 days and all fluids every 3 months. Including tranny and brake. Nothing bad yet crossing my fingers. Almost at 200k with no issues or leaks. I do love your work. Freaking vw with cheap parts. You got a subscriber here!

@Need4Built

3 ай бұрын

The thing about Audi’s and most German cars is preventative maintenance. That’s the key. I’m happy I got to this SQ5 and did all the maintenance to ensure reliability way over 100k miles. These items that I replaced are part of regular maintenance on B9’s around every 40-50k miles. Most Audi owners are uneducated about this or are lied to by their mechanics. Nissans and Toyotas are arguably the most reliable cars in the world haha. cheap and easy to work on. Thank you for subbing!!

Great video as usual, nice work! I really don't understand people that leave the factory roof bars on when they aren't using them. When they are installed the car thinks there is a load on the roof and makes changes to a number of systems, including ESC and stability control.

@Need4Built

3 ай бұрын

This is correct however removing them will only change cornering performance. I personally only care about straight line performance. And you can’t really remove the bars actually only the sensors inside.

@IainB

3 ай бұрын

@@Need4Built Huh? Of course you can remove the crossbars. They are meant to be taken off and on. Do you mean the roof rails?

@Need4Built

3 ай бұрын

@@IainB Can’t remove the roof rails*

@IainB

3 ай бұрын

@@Need4Built lol of course not :)

@Need4Built

3 ай бұрын

@@IainB would be nice if it was possible. Less drag. Less weight. No stupid sensors.

Great video. Definitely see your Kies inspiration and you made a great video. keep it up

@Need4Built

3 ай бұрын

Yes! Someone noticed! I’ve been inspired by Kies from the beginning. I hope they get to see this video as well. Thanks for the kind words!

Bro absolutely love this, looks like a good idea for a future sngine and transmission swap for countries that did not get these engines.

@Need4Built

3 ай бұрын

Agreed! 💪🏻

Next thing should be the exhaust system specifically the tail pipes have something like 4pips there...❤

@Need4Built

3 ай бұрын

Part 2 might have to happen in that case 👀

I’m definitely impressed with Audi on this one… When you were describing how it the sq5 felt after the mods. That’s how any b58 bmw feels with just stage 2 and bolt ones. Glides like butter, so much power down low, boost is there right away. But ofc stage 2 ots tune only makes about 525 crank

@Need4Built

7 күн бұрын

beh, I want an S58.

Thank you so much that has helped me a lot man I really appreciate it

@Need4Built

2 ай бұрын

Thanks for commenting!

Sick video! Nice job showing what these grocery getters can do with some bolt on mods! Do you know what steering wheel that car has? I need one for my SQ5.

@Need4Built

3 ай бұрын

Yeah get extremely fun that’s for sure. Worth every penny. I’m not sure where the owner found that steering wheel wrap/cover honestly.

I need something like that on my 7.5 gti, awesome content, wish i was that lucky , you deserve a sub for sure!

@Need4Built

3 ай бұрын

Thanks for subbing my man! Those gti’s got decent potential

Great content, I really liked it.

@Need4Built

3 ай бұрын

Glad you enjoyed

What an insane video. Amazing content

@Need4Built

Ай бұрын

Appreciate it!

Your video came up in my feed, just watched this whole video and holy.. Man you are very good at this, hats off. You just got a new subscriber, interesting to see that your channel has mostly audi stuff. I have an Alfa Romeo Stelvio if you wana modify it Lol. Amazong content!!

@Need4Built

3 ай бұрын

I definitely want to branch out into other platforms. Thank you for subbing ! Every sub counts.

amazing video! you should do something like this with a x3m or x4m!

@Need4Built

3 ай бұрын

I really want to get into an x3m next

@CGNsora-bm1zo

3 ай бұрын

@@Need4Built that’ll be amazing especially now that they have a s58 motor in them! Not much on the road can compete with them FBO on E

Nice video and awesome mechanic skills but I have a question.....1st car has leather steering wheel & 2nd has alcantara steering wheel.

@Need4Built

3 ай бұрын

Same car. lol. The Owner put on a steering wheel cover he wanted too and perfect timing since it took me a few days to finish up the car. I mentioned first I had only 24 hours but then that turned into a few days because we had to wait for parts from Audi and IE.

amazing man proper knowledge shared

@Need4Built

3 ай бұрын

Thanks for watching

Do you notice much noise from the 034 rotors with that J hook design?

@Need4Built

3 ай бұрын

Not with Hawks 5.0 HPS’s. No noises at all. People keep using track rated pads like EBC but you don’t need a dusty ass loud track pad that doesn’t bite until it’s very hot. Just a sport street pad is enough like the Hawks.

You said Washington and I knew exactly where that spot was from the beginning of the vid. I’ve taken pictures of my car on that road lol

@Need4Built

3 ай бұрын

Hell yeah ! 😄

I would also recommend you replace the vacuum reservoir as we have seen coolant collect in there and get sucked by the vacuum system again

@Need4Built

3 ай бұрын

First time hearing about this but Good point! I’ll keep that in mind for the next b9 i work on. Haven’t had an issue however. I always blow out the vacuum lines and usually Get some coolant out of those. Bypass valve, valve solenoids, water pump, thermostat, and cleaning the vacuum pump itself usually fixes everything.

@D0PEFRESHGAMING

3 ай бұрын

​@@Need4Builtya we see this all the time.

@eduardolima8560

3 ай бұрын

@@Need4Built yeah when these first started coming in we just replaced those but we started having some come back with more issues because the reservoir would be full with coolant

Great work bro! Can't wait to get my 2018 SQ5 on Tuesday. Any suggestions on the 1st MOD?

@Need4Built

3 ай бұрын

Definitely Stage 1 ECU/TCU then Intake, turbo inlet, Intercooler!

@Rey2018SQ5

3 ай бұрын

The fun begins; don’t forget the inserts and the front and rear anti-sway bar… so much fun taking corners and accelerating before the cars are still on pressing their brakes.,.

23:07 where are you located? nice scenery this Audi is truly a sleeper really nice work !!! love sleepers so much....under the radar ;)

@Need4Built

2 ай бұрын

Thank you for much !

Sweet build! The amount of wear on vehicle was insane! Prob would have failed pretty soon if you didnt catch all of that.

@Need4Built

3 ай бұрын

Pretty good timing I agree!

underrated love the content

@Need4Built

3 ай бұрын

Thank you!!

Congratulations for 7k❤

@Need4Built

3 ай бұрын

Thank you!! Huge milestone!

@K-SHABAB

3 ай бұрын

@@Need4Built you fully deserved that

Never new a diesel could sound so good, much love from Scotland ❤❤

@markolalovic9861

3 ай бұрын

Because it's not diesel. 🤣

@Need4Built

3 ай бұрын

It’s not a diesel! The TTE810 gives it that whistle ✅

@Need4Built

3 ай бұрын

Surprised some people think this thing is a diesel when b9’s go with a hybrid turbo. Something about the rumble and whistle. But I did say and show that it’s a gas engine. Lol

@level1804

3 ай бұрын

Come on tae fuck! Did you watch him change the SPARK PLUGS man? 😅 A4 45 owner here. Would love someone to do a retro upgrade on the 2.0ltr 265bhp output. Much love from Scotland. ❤

@del7723

3 ай бұрын

Sq5 in europe is Diesel only. Thats ehy people think that.​@@Need4Built

bigger turbo always better, when i was building my f150 i was torn between twin turboing it and single turboing it, after daily driving an 88ml garrett that pushes the motor to around 1300 on ethanol i can confirm, big single over twins all day long

@Need4Built

3 ай бұрын

Big single definitely gives you more top end. This is just a hybrid so it’s being choked by its own exhaust side but hopefully in the near future these b9’s will have big boy turbo kits.

Yep I was already going to get one so I'm definitely getting one now

@Rey2018SQ5

3 ай бұрын

You’ll be a very happy man!

@Need4Built

3 ай бұрын

Yesss!! Let’s go! Happy to influence you! Make sure to modify it.

What a DREAM ride!

@Need4Built

3 ай бұрын

Agreed !

best suv on the market fr

@Need4Built

3 ай бұрын

For the price and potential 100%!!

Sensors on engine mounts... What a time to be alive

@Need4Built

10 күн бұрын

Been around for a while but I agree. However it’s to control the hydraulic fluid inside the engine mounts. Sophisticated

This Audi is getting sooo much mechanical romancing it gives you back some beautiful purrs

@Need4Built

2 ай бұрын

This comment is a perfect representation of what happened In the video.

Hey quick one for ya today! -- @17:15 you used your jack to hoist the car up by its' side smack dab where the B pillar looks to be at, but I notice you didn't use the designated pinch welds... Comments on why you went with that? I had asked myself the same question if it was OK to do so or to just stick to the pinch welds beside each wheel. Thanks in advance, always love your content!

@Need4Built

3 ай бұрын

Good question! You should ONLY raise the car at the designated pinch welds. The pinch weld does continue all the way through and technically you can use the jack on it but if you’re not careful you’ll damage the lower carriage cover. I shouldn’t have jacked it up in that spot (didn’t damage the cover) but sometimes I’m in a hurry and forget. If you move that soft cover aside you’ll see the pinch weld going all the way to the other side.

@Enizax

3 ай бұрын

​@@Need4Builtohh the pinch weld goes all the way across the side that's great to know -- follow the line and mind for occlusions so the car rests 100% of its weight on that line against the jack! Thanks as always!!

i live so close, maybe ill pay you to do a video on replacing the motor and going big turbo on my focus st lol!

@Need4Built

3 ай бұрын

Send me an email 👀

Damn that dude got a good ass build fs

@Need4Built

3 ай бұрын

Hell yeah

I have a 2018 SQ5. I would be happy with just the Stage 2. The stock SQ5 feels heavy and slow.

@Need4Built

3 ай бұрын

Stage 2 is definitely how it should’ve came from the factory

@Rey2018SQ5

3 ай бұрын

Don’t stop, you’re almost there! It’ll put a smile on your face each time.

love the content man new subscriber here 😸

@Need4Built

3 ай бұрын

Thank you so much!

Amazing build. Great jobs. Can you do BMW too? 😅😅😅

@Need4Built

2 ай бұрын

I’m planning to touch bmw as well 😎

@tcw9999

2 ай бұрын

@@Need4Built : I got 2021 BMW X5 M50i. Please let me know if you guys got any ideas 😅

did you put the stage 3 in with OBDEleven? im kinda bad at stages on cars i never done them

@Need4Built

3 ай бұрын

No, OBDeleven is for diagnostic purposes like clearing and checking codes. Also you can do pretty cool things like personalizing your car by changes things like lighting, etc. check it out and use my code: Need4Built10. oobdeleven.com To flashed the car I used 034 Motorsport’s cable and my phone. They have a mobile application now so flash on the fly from your phone. Really cool.

the donut edit was hilarious

@Need4Built

3 ай бұрын

Donut = W

Well that car is an absolute beast 🤴💪

Amazing it didn't blow up during your benchmark runs. That engine was a mess mechanically.

@Need4Built

3 ай бұрын

B9 engines are insanely reliable and resilient. I’m happy I got the maintenance done as well to ensure long term reliability. That stock turbo was damaged as well..

Great content...where you at? Look close to Mt Rainer

@Need4Built

3 ай бұрын

Auburn area 👀

@greyz33tracknissanfan73

3 ай бұрын

@@Need4Built Very cool, grew up in Auburn, out in Puyallup now. I'm in the market for a B9, may have to reach out once I secure one. Keep up the good work!

Loved this video bro😭🙏🏼

@Need4Built

3 ай бұрын

Glad you enjoyed it my man!

What software do you recommend for stage1 or stage2 use 034 or performancebyie? Because I saw that your car uses performancebyie software, but in this video, you show 034 software. What difference and what is your experience with these two similar solution?

@Need4Built

Ай бұрын

The only difference between stage 1 and stage 2 on either tuning software is a downpipe. I’ve been using 034 Motorsport for over a year now and will continue using them as they’ve promised built motor support for the b9 and b8 platforms. They also constantly improve and are innovating superior tuning software. Including providing hardware that will finally create a breakthrough in these platforms.

Only thing missing in the build are some lowering links and then it is my dream daily😍

@Rey2018SQ5

3 ай бұрын

I have those as well, but didn’t wanna lower it to that level, but I can change it anytime

@Need4Built

3 ай бұрын

Those were installed actually off camera so from 034 but we only lowered it very slightly. You can see the difference between the initial and post shots of the SQ5.

3:31 SQ5 or QS5? It’s all good love the content 💯

@Need4Built

3 ай бұрын

I hear SQ5 😃

Please build my Audi to xD Straight out of germany keep up!

@Need4Built

3 ай бұрын

Haha I would love to! But you’re across the pond 🥹

@maxedos4905

3 ай бұрын

come visit ;)@@Need4Built

Which exhaust you running? Great sounding.

@Need4Built

3 ай бұрын

He’s running a cat less down pipe with the stock one exhaust. The high flowing tte810 makes it sound insane with all the extra flow. The whistle in person is crazy. I can’t recreate it on camera.

i see this channel going places

@Need4Built

3 ай бұрын

Thank you for saying that man. I think with hard work, dedication, fun content, I’ll get there!

Do the new versions of the waterpump have the same issues? Or is it going to come back eventually ? I have the same issue with my SQ5, what are the parts that I need to replace, if you don't mind making a list. THank you!

@Need4Built

2 ай бұрын

No the new water pumps have the same issue and will fail with item. These are all wear and tear items. Failures usually happen 50-70k miles from what I have seen. Same with the engine mounts.

@LeCatCation

2 ай бұрын

@@Need4BuiltDo you have a list of the parts I need to replace ?

You should run the e85 sensor on the return side of the fuel rail so there is no loss of flow from the sensor from the diameter of the sensor is always smaller then the main fuel line you will get the same reading

@Need4Built

2 ай бұрын

Thanks for the suggestion

My wife and I would love a sponsored car. 2018 white SQ5 diamond stitched seats flat bottom steering wheel and twin boys that asked for that as I was watching 😅🎉 great videos keep it up

@Need4Built

3 ай бұрын

I would love to transform it for you 👀

@Rey2018SQ5

3 ай бұрын

You’ll only regret it if you don’t do it!

I had a q7 and I loved it but pandemic hit and I had to trade it in because it was eating a lot of oil plus the maintenance was really expensive here in Hawaii. Aloha 🤙🏽

@Need4Built

2 ай бұрын

Maintenance is expensive especially if you’re not doing work yourself. Still parts are expensive.

It’s nice to see Washington content creators

@Need4Built

3 ай бұрын

PNW 💪🏻

trackhawk killer? hell nah this is that hellcat genocide now 💀💀

@Need4Built

3 ай бұрын

This should be a pinned comment.

3.12 seconds that was hypercar performance some years ago(before Tesla) and that in an SUV is insane. If you told somebody in the 90's that in the future you could 0-60 in a SUV with 2 people and equipment in that time they would have laughed their ass off. How much effect do this mods have on the frequency of maintenance?(assuming you dont race it like all the time)

I have a 2023 Audi q5 45 TFSI. I was wondering what mods there is available for that platform, need to know how and where to get started

@Need4Built

3 ай бұрын

Check out what 034motorsport and integrated engineering have for you car.

Awesome 👌

@Need4Built

3 ай бұрын

Thanks for watching!

I'd love to stage 2 my 2019 A7 but I just have concerns about the 7 speed DSG. Think it would be possible for me to swap in an 8 speed later on?

@Need4Built

3 ай бұрын

Why are you worried about your 7 speed dsg that’s stronger and more reliable than the engine itself? Just do maintenance on it every 40k miles.

@gregrn779

2 ай бұрын

@@Need4Builtkinda similar question… Are there any concerns about trashing the driveline, DSG, CV’s, ect; with that much of an increase in torque and power?

hi bro i love the content keep it up

@Need4Built

3 ай бұрын

Hey thank you so much! Will do ! Never quit 💪🏻