Toyota Tacoma | MESO Customs Hex Rack Install | AR Set Up | (2017 Tacoma)
*To win the MESO Hex Rack Kit.*
Make sure to subscribe to the channel.
Follow me on IG -- / classy_tacos
Make sure to leave a comment here with your IG handle.
Once we pass 3000 subs I will randomly select a winner from my subs list here on KZread.
What you will win -- Non SunRoof MESO Hex Rack with the Handle Retention Kit Included. I will pay for shipping to the Lower 48. If you win from Canada we can discuss shipping.
Good luck and thank you so much for all the support! It's been an interesting ride.
The install of the rack itself was only difficult once you get to the second set of bolts. The rack is so well built it produces a super tight fit. Which is what I have come to expect from MESO Customs. The hex rack looks great in place and really adds some storage space in the cab. For my set up, I used lockable AR wall mounts with the ability to lock on both sides, so the rifles can point in the same direction.
I want to make it absolutely clear that I will not be driving around everyday with ARs attached to the rack. I took this mod on as a challenge to see if I could make it work and thought it would be a fun install. Does it look cool, sure. Are they easy to grab from the driver seat, hell no. Not a practical set up if you need the rifles quickly.
Thanks for watching, like, subscribe and comment with your IG handle for a chance to win one. I appreciate you. All links below.
My Shop -- www.amazon.com...
MESO Hex Rack -- cutt.ly/rQsvgVH
MESO Sunroof Hex Rack -- cutt.ly/eQsvlKn
Handle Retention Kit -- cutt.ly/mQsvcb1
AR wall mounts -- amzn.to/3f8VQTJ
Magnet/ 2 pack -- amzn.to/2WBHmWh
Riv Nut Tool Kit-- amzn.to/3fczfpy
One Tigris Admin Pouch -- amzn.to/2Vi1w6X
Stay Classy Patch -- amzn.to/3ydgkm4
Milwaukee Drill -- amzn.to/2UWhjZz
Hex Set -- amzn.to/3zWYzrH
Past Installs / Gear
Toyota Fender clips -- amzn.to/3zoYaOn
Dremel Multi Tool Set -- amzn.to/2UCQ2ew
Milwaukee Jig Saw M12 -- amzn.to/3zrEGbJ
Milwaukee Jig Saw M18 -- amzn.to/3rRFnZp
Milwaukee 3/8 Ratchet -- amzn.to/36W7uwP
Jig Saw blade kit -- amzn.to/2UEV9uy
Angle Grinder -- amzn.to/2UEV9uy
Flapper disks 20 pack -- amzn.to/2UEV9uy
Cutting disks 20 pack -- amzn.to/36STx2D
Trim Tools -- amzn.to/3izMYYm
Shop Stool -- amzn.to/3izMYYm
Bedliner Spray paint -- amzn.to/2Tt9r0E
Etsy Decals -- cutt.ly/wmLehLu
Commercial Spray bottle 3 pack -- amzn.to/3wJZI3J
Painters Tape 1.5 inch -- amzn.to/3rfI7PX
Goo Gone spray bottle -- amzn.to/3wFnYUt
Goo Gone Wipes -- amzn.to/2UVon8o
Goof Off 3 pack Spray Cans-- amzn.to/3B9SyZQ
Squeegee / trim Pack -- amzn.to/2Tihxcw
Eraser Wheel -- amzn.to/3wNuske
3m Eraser Wheel -- amzn.to/2UlYCxM
Shop Paper Towels -- amzn.to/3ifoZNT
Shop Rags -- amzn.to/3kqZETO
Glass Cleaner -- amzn.to/3er1RLk
#mesocustoms
#hexrack
#arinstall
Пікірлер: 155
My shop > www.amazon.com/shop/classytacos Thanks for watching! Don't forget to subscribe and leave a comment with your IG handle, for a chance to win the rack.
@ClassyTacos
2 жыл бұрын
Thank you.
You know I have been waiting on this video and man that was cool! Your 4 previous videos were also incredible, your Chanel is the best Tacoma Chanel out there.
@ClassyTacos
3 жыл бұрын
Thank you very much for the kind words. I really appreciate it.
You explain everything in detail, so we understand the reasoning for everything you do, witch make it very easy to follow, awesome 😎 Job
@ClassyTacos
3 жыл бұрын
Thank you.
I used pieces of mending plate from tractor supply covered in heat shrink to act as a washer for top and bottom gives a lot of flexibility without having to drill through the rack
@ClassyTacos
6 ай бұрын
Nice, thanks for watching.
sick bro ...the color is perf!...had to come back and edit...props on the "Stay Classy" patch on Meso products page!
@ClassyTacos
3 жыл бұрын
Thank you.
thank you for this video with the handle retention kit install included. i just finished installing mine based on this video.
@ClassyTacos
Жыл бұрын
Anytime, thanks for watching.
I thought this Mod wasn’t for me. You Sir, have sold me.. Great Video!
@ClassyTacos
2 жыл бұрын
Thanks, I'm glad you enjoyed it.
That color match makes the Mount look even better! Great job!
@ClassyTacos
3 жыл бұрын
Thank you.
As always, very thorough install video! Nice job. 👍
@ClassyTacos
2 жыл бұрын
Thank you.
That’s a great idea 😊good job on the installation and narration
@ClassyTacos
10 ай бұрын
Thanks for watching, appreciate it.
Subscribed based off this 1 video from you I've seen. Badass setup man. Was wondering where I plan on storing my guns when we go out camping. I wonder no more!
@ClassyTacos
2 жыл бұрын
Thank you very much.
Love to add this to my truck! Enjoy the videos!
@ClassyTacos
2 жыл бұрын
Thank you.
I am about 99% sure this is the only video that shows how to install the handles with the extensions. Good job! Did you prep the rack any specific way when you painted it?
@ClassyTacos
3 жыл бұрын
I really want to say yes, but I was feeling lazy that day. It was a wipe down and spray. Thanks for watching.
Awesome set up and another great job, keep up the good work
@ClassyTacos
3 жыл бұрын
Thank you.
This worked out well congratulations on 3k subs
@ClassyTacos
2 жыл бұрын
Thank you.
Awesome video! Proud you didn’t lose your shit on the second side!
@ClassyTacos
3 жыл бұрын
It was close there was some editing there. Thanks for watching.
Thats an awesome place for the rifles. Im sure ill swearing when i put that in by myself. Nice.
@ClassyTacos
3 жыл бұрын
Yup, those last 2 bolts were a fight.
Congrats on the 3k subs Classy!
@ClassyTacos
2 жыл бұрын
Thanks.
Have you figured out a way to safely secure them? IE. Put a lock on them to prevent theft? I'm wanting something like that for my f150. But would feel safer with a lockable device. Looks great!!!
@ClassyTacos
2 жыл бұрын
Some folks are using cable gun locks like the ones you get when you purchase a new pistol. Thanks for watching.
I think plastic spacers/washers with a rubber washer for vibration would work well, to drop the mounts down a little lower. And longer bolts to compensate for the length. Absolutely love this! Cheers. And just in case it has not ended @chazzfie
@ClassyTacos
2 жыл бұрын
That’s a great idea, thanks for watching.
Awesome install brother!
@ClassyTacos
2 жыл бұрын
Thanks man, appreciate it. I’m patiently waiting for the drop of the connector to the overhead console. 🤙
MESO inventory is available (in stock) .001% of the time.
@ClassyTacos
Жыл бұрын
They are always low.
That would also be handy for iPad mounts for the kids
@ClassyTacos
3 жыл бұрын
Yes it would.
Random mumbling. Signs of a great mechanic. Means we are always thinking. How do the ar’s fit when mounted that way, I originally ordered one from og fab and never used. Just to big for and nil clean, with the bending. I have a meso in the mail. I need to order another, one has to be black and my sons Tacoma is the grey colored
@ClassyTacos
Жыл бұрын
It is a tight fit, SBRs or pistols fit the best. Thanks for watching
@2gunslefty
Жыл бұрын
@@ClassyTacos I loved your video , and the tip to mount it reversed , but like you were saying not going to drive around with them every day. I have a q honey badger, with rugged 5.56 it would kill me if that ever got stolen. Any of my things, Nice toys as well. I have a clone of a mk12 I built. Upper from Charlie’s clones. Lower is a daniel. With binary. Original Hk rail covers. I’m waiting on the suppressor to go with coller. I’m about 3 months in. So should be soon. Once you go suppressed it’s hard. To go back. If you check og fab. ( don’t like there molle stuff I gave mine away ) but he has some ar blocks for mounting. No wiggle, They lock and you can run a lock through them as well. He has them for ar. Ak, a few ar pistol locks. For my mp5 I had 2 3D printed . 2 mounts not that great. Thanks for answering. God bless and stay safe.
I'd be kinda worried that the wall mount might mess up my AR when I'm on rough terrain.
@ClassyTacos
Жыл бұрын
Na, no need to worry about that, it will be fine. ARs are tools not show pieces. They can handle it. Thanks for watching.
Live this video!
@ClassyTacos
2 жыл бұрын
Thanks.
Can this be fitted to a2021 4runner
@ClassyTacos
3 ай бұрын
I really can’t say. Try asking Meso Customs. I believe his wife has a 5th gen 4R. Thanks for watching.
Already have but love the vids 🤙🏽
@ClassyTacos
2 жыл бұрын
Thank you.
Cargo bar to push rack up
@ClassyTacos
8 ай бұрын
Yup, that will work. Thanks for watching.
I need one for my f150
@ClassyTacos
11 ай бұрын
Thanks for watching.
I NEED this! Sick!
@ClassyTacos
3 жыл бұрын
Thank you.
Anybody seen something like this for a 2500 Ram?
I really enjoy your vids!
@ClassyTacos
3 жыл бұрын
Thank you.
What do you think weight wise you’d want to put on the rack? I bought the Meso one because of the thick aluminum. Not worried about the rack. More the connection points. I’m mean, those rifles aren’t light 😂
@ClassyTacos
Жыл бұрын
I think rifles will be fine. Anything to large, bulky or heavy won’t fit.
Looks like your building a tank, lol good work!
@ClassyTacos
3 жыл бұрын
Thanks 👍
So dope!! 🔥
@ClassyTacos
3 жыл бұрын
Thank you.
Am I too late for the give away lol nice set up bro!
@ClassyTacos
2 жыл бұрын
Nope, you are good, still going on.
@quesokelso5425
2 жыл бұрын
You’re Awesome bro, I don’t have IG but that’s one sweet give away! I’ll still subscribe! Looking forward to more content
@ClassyTacos
2 жыл бұрын
@@quesokelso5425 Thank you very much. I appreciate the kind words.
Who run a full size as a truck gun, i have 2 sig rattlers identical, with pdw stock ones 300 one is 5.56 , with gen tech can and Surefire they fit solid. Enough room. Who cares I drive . I don’t sit in back lol
@ClassyTacos
Жыл бұрын
Nice.
Pretty awesome! Liked and subscribed, new taco owner here excited for future Tacoma stuff! I wonder if the work truck seat delete on the 2022 Tacoma’s takes away the handles in the rear
@ClassyTacos
2 жыл бұрын
Thank you, Appreciate it. Even with out the handles the holes should be there.
My molle has stuff like baby wipes and hospital-type puke bags for the kids so it’s only slightly less manly lol 😂
@ClassyTacos
2 жыл бұрын
Don't let the tactical BS fool you, I been there. Diapers, wipes, butt creme, it's more manly doing what you have to do. Thanks for watching.
sickkk🔥
@ClassyTacos
2 жыл бұрын
Thank you.
Sick 👍
@ClassyTacos
3 жыл бұрын
Thank you.
I like the set up you have there. I put in a sunroof rack on mine, and didn't even do half of what you did to your's. Prob the only thing I did more than you is use "colorful sentence enhancers" lol.
@ClassyTacos
3 жыл бұрын
Thanks for watching!
@adan__joseph awesome video by the way 👍👍👍👍
@ClassyTacos
3 жыл бұрын
Thank you very much.
Can I use a regular nursert gun. Mine is from Germany and works a little different
@ClassyTacos
Жыл бұрын
I don't see why not, how different is the tool?
@2gunslefty
Жыл бұрын
@@ClassyTacos thanks for the reply, it’s basically the same tool. I believe but it drives and crushes likes a cert nut. It has separate mandrels. It’s a German made tool I grabbed from Grainger. I have a neumatic rivit nut gun. But once it’s in it’s in,even on the lowest pressure setting. I also have a raptor. One of the guys in our club ripped his skid plate off. Like all the fatocty welded bungs out. I have a on board compressor under the hod it had 8 holding this skid plate one I use 6 of the neumatic river nuts , (they are a little stinger material) you know more then me. But it’s a year later and his skid plate now has all 8 takes it on and off. Rock solid . Was supposed to be a feild fix. We ended up cutting a door out for the oil plug. And used the handheld gun to make the nuts to go in and out. I love your stuff. It’s my sons Tacoma, he is always finding projects lol he wants a on board compressor, I was thinking of splitting a tank kit and putting it behind the back seat. Wish you guys had stuff for raptor. I have had my own stuff made. My son wanted a bridge for his Tacoma , I wanted one for the raptor . I ended up using paper to mock up sides. (I have access to a water jet machine my chopper builder lets me use it) I made the sides and made a bridge but it’s 3 peices 2 up sides and one across. Instead of Tacoma style 3 peices. I first bought my son one from another fab. Way to big for a taco and not good quality, had to bend your self. No spacers dug into the head liner. We just ordered him your hex panel. His truck is a green so I’ll powered coat that to match truck. The other panel I cut up and made some molle stuff for my raptor. Thanks sorry for long text, love meso’s stuff. It’s the name mesa tactical amazing and meso lol God bless
@ClassyTacos
Жыл бұрын
@@2gunslefty all good vibes, appreciate you watching.
Nice! @officialro 👌🏼
@ClassyTacos
3 жыл бұрын
Thank you.
Did the contest already end for the giveaway of the second Hex Rack Kit?
@ClassyTacos
3 жыл бұрын
Nope, still going on. We need to hit 3000 subs.You got some time
Where did you get the sound detening stuff at?
@ClassyTacos
3 жыл бұрын
Amazon for the deadening and the insulation.
@raymonde.tanneratomic-rc9370
3 жыл бұрын
@@ClassyTacos would you have alink6
@ClassyTacos
3 жыл бұрын
@@raymonde.tanneratomic-rc9370 Sound deadening. -- amzn.to/3luYffK. / Insulation -- amzn.to/2WNY9Fv one box each will get the ceiling done. You will have alot left over from the sound deadening and nothing left over form the insulation foam.
Where did you get the stormtrooper sticker??!!
@ClassyTacos
3 жыл бұрын
I think it came from Ebay, many years ago. I found it while I was redoing the garage. Thanks for watching.
No instagram for me... Bummer.
@ClassyTacos
3 жыл бұрын
Maybe set up a blessing IG?
Looks sick dude! Are you gonna post a video for the sound deadening? Twood1213
@ClassyTacos
3 жыл бұрын
Thanks. I did not record the sound deadening or insulation. I was in a rush to get it done. I might video the rest of the truck, but there are already some good videos out there.
Looks awesome #orsonfackrell
@ClassyTacos
2 жыл бұрын
Thank you.
Nice @the_cement_taco
@ClassyTacos
3 жыл бұрын
Thank you!
Badass!! eicontreras1
@ClassyTacos
3 жыл бұрын
Thank you.
Looks good @taco_famventures
@ClassyTacos
3 жыл бұрын
Thank you.
Quite sure everyone who has ever worked on their own vehicles has random mumblings. lol
@ClassyTacos
3 жыл бұрын
You know it.
😵💫random😵💫😵💫😵💫 mumbling 😵💫
@ClassyTacos
3 жыл бұрын
You know it.
Looking good. Was just looking at that last night. @reavers.adv
@ClassyTacos
3 жыл бұрын
Thank you.
IG UT_Jeff
@ClassyTacos
3 жыл бұрын
Got it.
this was ridiculous
@ClassyTacos
Жыл бұрын
Yes, and I love it.
Another awesome pain in da ass mod!😂@308winnut
@ClassyTacos
3 жыл бұрын
You know how we do.
seems awfully flimsy too me
@ClassyTacos
Жыл бұрын
Just as flimsy as any other lockable mag catch. As for the overhead rack, nothing is flimsy on it. I can do a pull up on it. Thanks for watching.
@schlomoshekelstein908
Жыл бұрын
@@ClassyTacos the whole plate flexes at 18:50 when you're tweaking on it. I had to do a double take and google the product to make sure it wasn't a piece of PVC
@schlomoshekelstein908
Жыл бұрын
@@ClassyTacos do some inverted rows off it then! cause i'm not believing it!
@ClassyTacos
Жыл бұрын
@@schlomoshekelstein908 ha ha, it’s aluminum. In all seriousness it’s really not flimsy. I mean if you put 100 pounds on it, it will flex. For the ARs it’s fine, they lean up against the ceiling making a tight fit. They do not bounce around while driving, although I don’t drive full time with them in.
Nice as always🤙🏼 would follow suit for my soon-to-have AR @payder1
@ClassyTacos
3 жыл бұрын
Thank you.
I like the color match looks good man @rosenshredder
@ClassyTacos
3 жыл бұрын
Thank you.
Been enjoying your channel, relatively new. Question which bug/rock deflector do you have? Your truck is looking nice! Thanks! My IG is Nein9Nine
@ClassyTacos
3 жыл бұрын
Here is the exact name from Amazon -Auto Ventshade AVS 436079 Aeroskin II Textured Black Flush Mount Hood Protector for 2016-2020 Toyota Tacoma. It is currently out of stock. Thanks for watching.
Nice mod for the taco 🤙🏾 @charlie_r74
@ClassyTacos
3 жыл бұрын
Thank you.
Sweet. Been thinking of getting one. IG - overlanding_tbd
@ClassyTacos
3 жыл бұрын
Thank you.
As always love the vids and the content. Keep it up. Stay Classy. IG: Tacoka.Truk
@ClassyTacos
2 жыл бұрын
Don't know how I missed this, thank you very much for the kind words.
Love the videos! Thanks for all you do! IG reviz_the_wiz
@ClassyTacos
2 жыл бұрын
Don't know how I missed this, thank you very much for the kind words.
Awesome set up! I'm a brand new owner of a 2017 TRD-OR and have been following you for ideas. Keep up the great work! robcombs74 on IG
@ClassyTacos
2 жыл бұрын
Don't know how I missed this, thank you very much for the kind words.