New Roof Rack for my Tacoma! - Prinsu Cab Rack Install video
Автокөліктер мен көлік құралдары
Ive been looking for a low profile cab rack for my Tacoma. And I settled on Prinsu. It seemed to offer the best platform with the lowest profile, and a light bar... even if it is kind of expensive: prinsudesignstudio.com/produc... This video is not sponsored. Just a fun project video.
Follow me for updates!
Instagram: / zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: / zacksjerryrig
LARGE tool kit: amzn.to/2DURcr7
Travel Tool Kit: amzn.to/30LKXOY
Green Pry tool: amzn.to/1Tu57pI
Metal phone opening tool: amzn.to/1WdOFv0
The camera I used to film this video: amzn.to/2p7GtkX
The Lens I used for this video: amzn.to/1QOXDw2
Wide angle lens: amzn.to/2qiYM4u
And this Metabones adapter: amzn.to/2iZ67Ty
This is the drone I use: click.dji.com/AI2tmSb0onM9XPV...
TO SEND ME STUFF: See my P.0. Box on my 'About page': / jerryrigeverything
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.
Пікірлер: 318
Very nice. Especially enjoyed the drone shot
@thebrokenbolt3990
3 жыл бұрын
sadly his tyres are looking a little worse for the wear..
@Netflix_clips490
3 жыл бұрын
Why don't he tells he has a second Chanel on the main chanel
@fortnightman5
3 жыл бұрын
He does
@GymFactory8
3 жыл бұрын
Hey what’s inside family I watch you and I love your vids
@Xvinction
3 жыл бұрын
Lol
Hey Zach you should wrap your Tacoma with a skin that shows the internals of the truck. Kinda like your phone skins.
@Michael-pp8lz
3 жыл бұрын
never
@christianshadrick1150
3 жыл бұрын
Zack*
@Chris-hw4mq
3 жыл бұрын
OMG that would be great. Good ideea
8:51 that’s so nice that jerry came to help Zach put the rack on
Love the build. These trucks are the best. durable and safe as hell. My Tacoma literally saved my life last February
7:13 i see you dismantle @ChrisFix Hummer
@BlueMech
3 жыл бұрын
yea hahahhaaha
I was constantly watching my KZread for new video from someone
@Icegamer97
3 жыл бұрын
Me 2
@mahapatra5616
3 жыл бұрын
@@Icegamer97 bhak katue
nice quick video! I've seen others where they take a good 30 mins and don't explain cutting the holes in the weather stripping as simplistic as you did, thanks a bunch!
I thank you so much for this install and noticing the "closeness" of the rack tho the roof. I bought and installed more trim (similar to the wind trim) to each piece on the roof. Gotta protect the paint. Wouldn't have known had you not noticed it
You could try putting a thin strip of rubber under the mounting bracket, better safe then sorry, Love the vids btw
@christianeriksson4733
2 жыл бұрын
That way you would guarantee that everything shakes all time. Better to just mount a rack that is not wrongly made.
You remind me of a very competent maintenance tech I knew in the Air Force. It's rare to see someone take the "more complicated, but better path" rather than the easiest one.
I had the same roof rack! Loved it miss my taco!
6:52 Those who are watching for the first time be like :- OMG! What's going on But for me it was funny as hell seeing two Zacks together 😂
Zack, just ordered a 2021 and glad I stumbled across your channel. Thank you for all the info!
This channel lives!
I love your truck so much, it is so nice and keep up the good work!
Quality content as always dude, I wish everyone had the same epic video quality you do!! ;)
Nice work Zack, away love watching your videos, weather it is killing phones or making work benches, very informative, Melbourne Australia is in stage 4 lockdown and your videos are a nice pick me up 👍🏻👍🏻👍🏻👍🏻🇦🇺🇦🇺🇦🇺🇦🇺🦘🦘🦘🦘
Normally people that install them professional install rubber pads under those mounts because of vibrations and to prevent damage. Might be something to consider
Zack: I'm by myself * Proceeds to clone himself *
That top down drone shot for the roof rack placement at 6:10 was clever and badass!
Finally, another Tacoma vid!
Hey Zack hope your having a great day!
No, its not long enough! LOL. We need more and longer of these type of videos. We all love them. Truck looks great!
We love this 💖 Whichever uploaded 😁
Well done and super appreciated!
Finally a truck update
We'll wait for next video patiencely 😉
Great video!!
Yay more tacoma mods!
Nice hummer, bro. Great video. Great product.
Congrats on doing the first six-seat mod on the taco!
Before I wanted a Prinsu, but now UpTopOverland's Alpha roof rack looks to be much more functional while looking much more rugged. With side scenelights and those nifty grab handles. Been following them since their start up. They talk with the community often and seem to be more open to feedback. If only I had the money to afford it... Someday.
@TO_NC
11 ай бұрын
If his solar panels don’t start putting out, maybe we will see another Tacoma video!
Love your videos zack sorry I’m sooo late
The Tacoma is my dream truck love the color
I always love watching your Tacoma videos, I've driven a 2000 ranger for a long time and you really have made me want to work towards trying to get a Tacoma for myself. Love your videos on this channel
Man I love following these videos! I live locally in Utah valley. Let’s take our rigs and head for the hills!
Epic moment when I discovered you own a badass Taco!!
Awesome video! Love the DIY tip on trimming/boring the weather strip. My Prinsu rack is in transit and this really helped me gather the material/tools that I’ll need - thank you. BTW, that’s a kick ass shirt! Do you have a link or know the store that you bought it?
Great video
B channel is the best channel! 👊👍
Wish they would provide some extra weatherstripping to place along the edge of those front mounts. Great video and likely will be getting this soon.
The part of the video that I really liked was when you were on both sides of the truck tightening down the bolts in the front of the rack. The suggestion of the silicon is very smart. I didn't get to see what type of silicone you used but I would hope it is non-corrosive. Something like an aquarium grade silicone. Being under the weather stripping like you won't be able to see if it starts to corrode.
Oh wow its the Humvee!
Nicely done.
As is saw the two Jerry's working on the roof, I really want to see your video editing workflow :)
Excellent topic
Good choice on tools.
Jerry Rocks😂😎
Great video. Been looking for some tips on how to deal with metal portion of weather stripping. Did you end up wiring the LED bar light? Still looking for a good video on best wiring techniques. Thanks for the help.
Thanks so much!! Awesome video and very helpful, did your truck come with the sunroof or was that an aftermarket installation?
I would love a Prinsu for my Land Cruiser. They are sweet looking racks.
I got a Tacoma too. Might need to cop that’s hot af
I know your working on that sexy hummer but I miss these tacoma videos! Might as make this electric while your at it lol.
any plan to "play around" with your the rig zack? it'll be cool to see how you customize those
Thanks for teaching a genius like me something
Congrates for you and Cambry Agent 47...i look up to you my friend cheers
Zach’s been on Tacomaworld too much lately haha
So jealous of your truck! I miss my tacoma. Also, is that a hummer I see in the background? Is that another project? :)
Man I was confused when I saw two Zack jerry rig's
That was helpful, Thanks!
after soo long
Thank you for sharing.
Why i got the notification today also 😂 Just saw this yesterday.🥴
It's a huge pain, but I think I agree with you Zack, and I'd remove the whole thing and cut back those front brackets.
MKBHD: intricately places objects on set, meant to compliment the item Zach: milk jug on the tailgate
@christianshadrick1150
3 жыл бұрын
Zack*
I was checking for better options but definitely, prinsu is the best option when it comes to Quality-Price.
Have a look at 3m scotch 2228 mastic tape. Would be ideal to go under the front supports so it doesn't scratch your paint.
Hi jerry have fun
I'm more curious about that stripped down H1 in the background... :D
A video about that Humvee in the back would be nice
Few things there the roof rack mounts to the truck there are spacers to lift the mounts off the roof and you’re supposed to silicone the holes
I don't care what you build, I just like to watch you while eating
Nice job and video Jack. I'm considering buying this rack but want to be able to mount my Thule cargo box that requires two bars spaced 16" to 32" apart. Preferably nearer to 32"spacing. are there two bars that fit that requirement? If so what are the spacing between 2 or 3 bars?
Тачка - супер! Багажник - огонь!
Still waiting for the light bar mounting vid
Dig the old school Hummer in the background. You got the nylon / vinyl doors that came with it?
Good vid. IMO, 3/4" is too snug for the spacer hole size. At that size the spacers are super tight, and in that case you have to be exact in order to line up with the holes. My installation was a PITA because of that.
Thank you so much for this video. Just one question, how is the noise after the install?
Looks great! How’s this rack work if I was gonna strap a kayak on top….?
Not bad 47. Now you just have to have a compartment for the sniper rifles and plastic explosives.
Please do more videos like this.
With the attention to detail that you put into your work fixing smart watches found in lakes, to that awesome Offroad wheelchair you had built I had to save this video since I’ll be picking up a Prinsu Rack for my Ram this BF. The only thing I’ll do differently is wrapping my roof satin black since it will be harder to clean with the rack over-landing gear. I also contacted Prinsu techs they mentioned the possibility of interference with the antenna and metal rail, have you had any issues?
I like that the roof rack is basically just 8020 t-slot. Kind of wish it were cheaper because of that.
I could so use those drip rail mouldings....
Those rails look like 80/20 aluminum. They have a ton of different profiles on their site if you want to mod your roof rack.
Really confuse at 6:52, who am I seeing? Love the weather strip work around.
@ZacksJerryRig Do you happen to have the link for the low profile bumper? I can't seem to find it in the description. Thank you.
Very cool channel....want size tires are those and the offset ?
Do you think with that rack. You could also attach a kayak rack on there as well.
hey man, nice work! You can use a file to remove some metal in the front supports and create a clearance to the paint ;)
Now you can drive around with the roof rack empty and look sooooo tacticool!
@fvzz1
3 жыл бұрын
I've not heard the term tacticool in years 😂🤣
Hey Zach when you put on your new roof rack on the Tacoma, did you or do you get any wind noise from it?
6:50 shadow clone jutsu 😂 😂
Zack you gonna buy the cybertruck ? For the durability test I’m mean scratch test 😂
We want to see a video on your red tesla roadster
You should put a bit of rubber under those brackets as you're correct, they may damage the paint, which could lead to rusting.
Hey dude hope u see this, I jus got that roof rack, and it didn’t come with a weather strip, did urs come with it or dude u get ur own? If so what kind or what would you suggest?
hello @ZachksJerryRig is there any specific silicone you recommend for this application? Thank you sir
How’s the level of wind noise been after the install?
8:07 OMG please recreate MR.Bean scene with him driving his car from the roof :D