Toyota Tacoma | Fastronix Mil Spec Battery Terminals | (2017 Tacoma)
Автокөліктер мен көлік құралдары
Hello, today I install a set of Mil Spec battery terminals from Fastronix. Not sure why they are Mil Spec, but they are beefy and cheap. These terminals make it easy to add on winches, air compressors, and auxiliary fuse boxes/ power set ups under the hood. The through bolt and nut on the terminal excepts large lugs that are common on winches and air compressors. In my case all three will be installed shortly. These do require the use at of least a small torch and some soldering skills or the use of a decent crimp tool (not a hand held). I am for sure no expert, but they came out decent. I fully intend to replace them within the next ninety thousand miles or so. I do believe it would be way easier to solder outside of the engine bay. But that requires the removal of the main power cables. Either way, I hope you enjoy and it helps someone out. Stay Safe. Links below.
My Shop -- www.amazon.com/shop/classytacos
Mil Spec Terminals Full Kit-- amzn.to/37DVNe5
Mil Spec Terminals Posts Only-- amzn.to/2VDQPZd
Cable Cutters-- amzn.to/39GS965
RC 30 inch LED Black Series-- amzn.to/33N8qCG
RC 30 inch LED Black Series with DRL-- amzn.to/3lKePoj
Warn Evo 10s-- amzn.to/3mLSDvo
Factor 55 Pro Link (chose a color) -- amzn.to/3lNNsto
Craftsman Shop stool-- amzn.to/37CN0t1
Terminal Removal Tool Kit-- amzn.to/2JRaQco
Wire Tool- amzn.to/2JQh24e
Wire Connections-- amzn.to/37GrymK
WorkLight-- amzn.to/3pIyfNI
Auto Ventshade Aeroskin Deflector-- amzn.to/2IKPJIe
Pelican case-- amzn.to/2IggowD
different color options available
Milwaukee 3/8 Ratchet tool only-- amzn.to/3mOuSCP
Milwaukee kit-- amzn.to/3gpK07v
Dewalt 1/2 Impact-- amzn.to/2VHw2nG
My light duty ratchets-- amzn.to/2VMV04Z
Classy Tacos Mascot Trucker Hat-- cutt.ly/DhnPNj5
#tacomabatteryterminal
#milspecterminals
#batteryterminals
#offraodterminals
#fastronixmilspec
Пікірлер: 26
My shop > www.amazon.com/shop/classytacos Thanks for watching! Hit that subscribe button to stay up to date on all my videos!
The purpose of solder is to exclude air and thereby oxidation from the joint. The connection should be first made mechanically and electrically sound, then soldered. Crimped connections are effective in excluding air especially if heat shrinking afterwards. Overall clean install 👌
@ClassyTacos
3 жыл бұрын
Thank you for your comment. I will keep this in mind for the future. Also, thanks fir watching.
Super clean and well done
@ClassyTacos
3 жыл бұрын
Thank you very much, and thanks for watching.
Nice organized garage! Thanks
@ClassyTacos
Жыл бұрын
Thank you.
That was a big help, thanks!
@ClassyTacos
2 жыл бұрын
Thanks for watching.
Great videos....I seen three...all great grades for my 2nd Gen...and Semper Fi....
@ClassyTacos
3 жыл бұрын
Thanks for watching! Semper Fi
Great video, thank you!
@ClassyTacos
2 жыл бұрын
Thank you
Looks good.
@ClassyTacos
3 жыл бұрын
Thank you brother!
Any plans for s-pod or similar devices? Looks great btw
@ClassyTacos
3 жыл бұрын
I like the idea of the s-pod, but I will be running everything to OEM style switches. I just think they look cleaner. Thanks for watching.
If had a hydraulic cable crimpper 1 minute you been done harbor freight 40 bucks or less I own 07 Toyota fJ cruiser I am installing dual battery by odyssey and I will need change my terminal ends and be using military style terminal for better installation and twisting of cables I think the hydraulic crimpper are better faster connection
@ClassyTacos
3 жыл бұрын
I have heard some good things about the heavy duty crimpers. Good luck hope it goes smoothly.
@kumaquattro
3 жыл бұрын
@@ClassyTacos I agree with james ray, I have a hydraulic crimper and it works fantastic . I would have replaced those wimpy stock cables with 0 gauge cables and use heavy duty zinc plated copper terminals . The terminal you used was way to large for the cable you used, it should be a fairly tight fit . Thanks for the video .
What are the bolt and hole diameters???
@ClassyTacos
Жыл бұрын
Instead of me giving you a measurement as I don't know what application you are trying to install this into. Just make sure you know what is needed for your install. What are the sizes of the bolts you intend to use and match that. Thanks for watching.
CE AUTO ELECTRIC SUPPLY
@ClassyTacos
3 жыл бұрын
Thank you.
Don't solder your lugs, use the proper crimping tool
@ClassyTacos
3 ай бұрын
Ok