My shop > www.amazon.com/shop/classytacos Thanks for watching! Hit that subscribe button to stay up to date on all my videos!

Thanks for the vid man! Of all the vids on KZread I found yours the most helpful in my install, and it wasn’t too bad until that machete bracket on the drivers side. That was a struggle for sure! Got them in and they look great. Thanks again man!

@ClassyTacos

3 жыл бұрын

Glad it helped! I try to do my best to show what I go through in these videos. Thanks for watching.

Best slider install vid on the tube

@ClassyTacos

3 жыл бұрын

Thank you very much, appreciate it.

Thanks for the great video. I've got a pair in production now. You're not the first person to be bummed-out about the bolt position right up on the brake lines.

@ClassyTacos

2 жыл бұрын

We can't have everything perfect. Thanks for watching.

@thejamiefoster

2 жыл бұрын

@@ClassyTacos if that's the worst thing that happens during my install, it's going to be smooth sailing! Thanks again for taking the time to document the process.

Mine were just delivered Monday. I’m putting them in tomorrow (Saturday) I’ll be following this vid as my instructions. Big thanks, I’m gonna skip the bolt near the brake lines too

@nickphillips4398

3 жыл бұрын

I’ll save the bolt and someday when I redo my lines I’ll just bend it in a different path and install then....if I even remember by then lol.

@ClassyTacos

3 жыл бұрын

Hop it goes well. Thanks for watching.

@nickphillips4398

3 жыл бұрын

@@ClassyTacos yes sir. I’ll probably add another view or two before all is said and done lol

Well done, thanks! Better than the manufactures vid.

@ClassyTacos

2 жыл бұрын

Thanks for watching.

Great video

@ClassyTacos

Жыл бұрын

Thank you very much. Appreciate it.

Wow that looked like fun . Good instructional as always

@ClassyTacos

3 жыл бұрын

Thank you, and thanks for watching.

THANK YOU FOR THIS VIDEO, VERY GOOD JOB . THANK S FOR THE TIPS. AND FOR THE RIGH RATCHET YOU USE FOR THE BOLT CLOSE TO THE GAS TANK... ... I M GONNA PICK UP ONE LIKE THIS IN 3/8.. I HAVE BUT 1/4.... GREAT JOB THANK S. I m gonna order this one for my Taco offroad (2019)

@ClassyTacos

2 жыл бұрын

Glad it helped. Thanks for watching.

Passing by this channel.. nice garage. 👍🏼

@ClassyTacos

3 жыл бұрын

Thanks for passing by, and the kind words. Stay safe.

Great detailed video. Just curious why you went with Cali Rock Sliders instead of RCI. I am considering both right now but leaning towards RCI since they are located about 15 minutes away and I could pick them up and save on freight. Appreciate your feedback.

@ClassyTacos

Жыл бұрын

I like the look of these and they were well priced at the time. Sliders are sliders if you pick them up and save in shipping, go for it.

Nice video! Good lighting most slider installs are to dark.

@ClassyTacos

3 жыл бұрын

Thank you.

Well done! Enjoyed the install.

@ClassyTacos

3 жыл бұрын

Thank you and thanks for watching.

So jealous, those are so freaking awesome.

@ClassyTacos

3 жыл бұрын

Thanks bub! We have to get out soon.

@sideeyes7480

3 жыл бұрын

@@ClassyTacos heck yeah! You’re the official rescue truck now.

@ClassyTacos where did you find the TRD center caps in your wheels?

@ClassyTacos

10 ай бұрын

Here is the part number -- PTR18-35092 Currently unavailable on Amazon. Thanks for watching.

That’s the best looking sliders I’ve seen yet for the Tacoma. Clean and tight! Any thoughts or reviews of them off road? Capable when “Oh Shit!” happens? Thanks

@ClassyTacos

8 ай бұрын

So far so good, no complaints. Thanks for watching.

Nice install. I have some on the way. Did you have a black box on the truck?

@ClassyTacos

Жыл бұрын

Maybe? I removed a cover on the passenger side frame. I'm pretty sure it's in the video. Is that what you are referring too?

Hey man great tutorial. I got these on the way this week. Do you know what that wiring harness is for on the driver side that you had to pop loose from the drivers side?

@ClassyTacos

3 жыл бұрын

I do not. It might be a crash sensor. I'm not really sure. Thanks for watching.

Good informative video! Tacoma looks really nice!

@ClassyTacos

3 жыл бұрын

Thank you. I really appreciate it!

Thanks for the video. Truck looks awesome brother👍🏻. Absolutely love those wheels. What are they?

@ClassyTacos

3 жыл бұрын

Thank you for the kind words. The wheels are Level 8 MK6 in gunmetal, TRD center caps, with GY Wrangler Kevlar Tires.

Thanks bro helped me a lot

@ClassyTacos

2 жыл бұрын

Thanks for watching.

How are those unpainted brackets holding up? I'm wondering if I should paint mine b4 install

@ClassyTacos

2 жыл бұрын

So far fine. They are either galvanized or zinc coated which is enough here in my environment. I'm in FL, so no salt on the roads. Thanks for watching.

How have these held up for you? I’m looking at putting these on my 21 OR. Would you get them again?

@ClassyTacos

Жыл бұрын

They been great, no issues. I would get them again. Thanks for watching.

Looks awesome. How are they holding up? Is the angle too steep to use as a step?

@ClassyTacos

Жыл бұрын

Holding up fine for me. It is to steep for a good step. It’s almost like pinching your toe in between the door and step. I usually just open the door. Thanks for watching.

I did my Caliraised zero degree sliders last summer. The hardest part to me was lining up that initial 14mm bolt. Had to get creative to get some of the bolts secure, for sure. Also, one of the spacers wouldn't fit on one of the claps? My frame (2020 Pro) stuck out too far, but I was still able to fasten the clamp. Hopefully not an issue. Loving the sliders! I need to get the fill plates painted to match my Army Green.

@ClassyTacos

3 жыл бұрын

Thanks for watching, glad you were able to get them on.

Looks nice

@ClassyTacos

3 жыл бұрын

Thank you.

Hey man, what brand are the long flex head wrenches you are using?? Ty in advance bro

@ClassyTacos

2 жыл бұрын

Here is a link to my set. They are my favorite wrenches. Links for both Metric & standard. Link -- amzn.to/3xVxA1f Link -- amzn.to/3b2WenI

@rkladis

2 жыл бұрын

@@ClassyTacos ty brother!!!

Hery man, how do you like the rocks sliders after a few months of ownership? Based on photos, it look like the rock sliders don't cover the panel under the door enough. Is that true or do you feel there is enough coverage?

@ClassyTacos

3 жыл бұрын

I think they are fine and I like them very much. Most of the sliders on the market do not cover that small section right behind the front tires. I think thats what you are talking about. I feel like the coverage is good for my needs, no issues. Thanks for watching.

What tool did you use to remove those clips at 4:15? I’ve had to deal with similar clips for my TSS sensor to do pro grill mod but I destroyed them. I’d really like to not destroy clips haha.

@ClassyTacos

3 жыл бұрын

I normally damage the clips too, every once in a while I get lucky. Here is a link to decent set amzn.to/3f4LIfH My exact one is pretty old.

@a_papa_robot

3 жыл бұрын

@@ClassyTacos thanks! Ordered! Mine are coming in soon and I’ve saved your video for reference! Thanks for the content!

Did u put any cover for the break lines

@ClassyTacos

3 жыл бұрын

No I did not cover the break lines. Right now nothing is touching any of the lines, so no rub.

Just did an order like 2 hrs ago lol 15 % off black Friday deal How long did it take you to receive em?

@ClassyTacos

3 жыл бұрын

It took about 2 months for me, I did get them powder coated so that adds time. Thanks for watching.

@ericlopez3890

3 жыл бұрын

Thanks for replying! Great job your videos brotha!

@ClassyTacos

3 жыл бұрын

@@ericlopez3890 Thanks!

What wheels are those

@ClassyTacos

3 жыл бұрын

In this video they are Level 8 MK6 in Gunmetal 16 by 8 -12 offset. Thanks for watching

I do not like that attachment design.

@ClassyTacos

3 жыл бұрын

Have you seen a better bolt on design? There is only so much you can do with bolt ons. Weld ons are a different story. Thanks for watching.

Waaaay to expensive. Got BA Revo's and they fit the bill wonderfully. No extra bs charge for the kickout and powder coat.

@ClassyTacos

Жыл бұрын

BA Revos are on sale right now, usually they are $760 plus shipping. It's not that far off from when I got mine. Thanks for watching.