This video shows how to install the R4T Group 31 Battery Terminals.
Жүктеу.....
Пікірлер: 23
@LesFishingMoreCatching Жыл бұрын
Disconnect the negative cable before working on the positive or a tool or something can short out if it contacts the positive terminal and metal.
@troy3456789
Жыл бұрын
I'd definitely put the acrylic on the positive terminal side the moment all its connections are done, before messing with the negative side.
@30-06
Жыл бұрын
…and remove ring from finger while working
@captnreptar4220 Жыл бұрын
My only question with this system is how do you jump start if your battery dies somewhere?
@beardedtacoma Жыл бұрын
Just ordered mine. Excited!!
@vincentxiong2099 Жыл бұрын
Love that Knipex too by the way! This is def going in the cart!
@ryanskeete Жыл бұрын
What are you guys using so the toyota alternator is putting out sufficient voltage to properly recharge AGM batteries?
@swade417
Жыл бұрын
On my GX ive been using a Voltage Booster PRO and so far 0 issues, just mentioning as another option.
@troy3456789
Жыл бұрын
On a 3rd gen Tacoma, it can only be done with a tune adjustment to electronically tell the alternator to raise the output voltage to 14.6vdc. There is no other way to do it, no addon device that I know of to raise it from 13.8 to 14.6. Even with an aftermarket high output alternator, the computer will tell it to output 13.8vdc. The problem is that every time I talk to a "Tuner" to see if it can be done, they want to sell me a complete tune package that alters everything from throttle response to shift points. I don't want all that. I simply want to raise the output voltage; I'm happy with everything else about my taco. These Tuner guys are like high pressure salesmen.
@ryanskeete
Жыл бұрын
@@swade417 Yeah that’s what I’ve been looking into. I think if R4T is pushing using these G31 batteries or any AGM they should at least let folks know of the issues involved with going AGM. My $0.02
@theloneviking9145
Жыл бұрын
@@ryanskeete exactly what I was thinking
@alexs825
Жыл бұрын
@@ryanskeeteas an electrical engineer understand higher voltage means more stress and a guaranteed shorter lifespan on every component exposed to the higher voltage. I personally wouldn’t touch it unless it was creating huge issues where my truck wouldn’t start
@AntonioClaudioMichael Жыл бұрын
Will this kit work on a 4th gen or a 3rd gen 4runner
@AntonioClaudioMichael Жыл бұрын
Like the hold down bracket to bad there not made for 4th and 3rd gen 4runners
@iamglorfindel56339 ай бұрын
Will this new model work for a gx470? I have seen gx’s with the r4t terminals but they appear different from what’s currently on sale
@rob4f258 Жыл бұрын
How do I purchase this??
@thedewd5169 ай бұрын
what is the thread of all the posts on the r4t battery terminal?
@punkprinx Жыл бұрын
What about us 2014 tundra owners
@adventureswiththeallens6087 Жыл бұрын
Will this work on my 100 series Land Cruiser? I got the slee battery tray upgrade with group 31. But I seen you only mentioned fj t4r or taco
@Runnin4Tacos
Жыл бұрын
It will work with group 31 batteries.
@adventureswiththeallens6087
Жыл бұрын
@@Runnin4Tacos Just an update for anyone wanting to know if it works for 100 series. The negative terminal cover sits too high and can’t close the hood. Right now I have just the positive terminal cover, i shaved the spacers about 1/8”. Although, in theory you should be fine with the negative terminals exposed I made a cover for the negative terminals out of a thin sheet of rubber i found just for peace of mind.
Пікірлер: 23
Disconnect the negative cable before working on the positive or a tool or something can short out if it contacts the positive terminal and metal.
@troy3456789
Жыл бұрын
I'd definitely put the acrylic on the positive terminal side the moment all its connections are done, before messing with the negative side.
@30-06
Жыл бұрын
…and remove ring from finger while working
My only question with this system is how do you jump start if your battery dies somewhere?
Just ordered mine. Excited!!
Love that Knipex too by the way! This is def going in the cart!
What are you guys using so the toyota alternator is putting out sufficient voltage to properly recharge AGM batteries?
@swade417
Жыл бұрын
On my GX ive been using a Voltage Booster PRO and so far 0 issues, just mentioning as another option.
@troy3456789
Жыл бұрын
On a 3rd gen Tacoma, it can only be done with a tune adjustment to electronically tell the alternator to raise the output voltage to 14.6vdc. There is no other way to do it, no addon device that I know of to raise it from 13.8 to 14.6. Even with an aftermarket high output alternator, the computer will tell it to output 13.8vdc. The problem is that every time I talk to a "Tuner" to see if it can be done, they want to sell me a complete tune package that alters everything from throttle response to shift points. I don't want all that. I simply want to raise the output voltage; I'm happy with everything else about my taco. These Tuner guys are like high pressure salesmen.
@ryanskeete
Жыл бұрын
@@swade417 Yeah that’s what I’ve been looking into. I think if R4T is pushing using these G31 batteries or any AGM they should at least let folks know of the issues involved with going AGM. My $0.02
@theloneviking9145
Жыл бұрын
@@ryanskeete exactly what I was thinking
@alexs825
Жыл бұрын
@@ryanskeeteas an electrical engineer understand higher voltage means more stress and a guaranteed shorter lifespan on every component exposed to the higher voltage. I personally wouldn’t touch it unless it was creating huge issues where my truck wouldn’t start
Will this kit work on a 4th gen or a 3rd gen 4runner
Like the hold down bracket to bad there not made for 4th and 3rd gen 4runners
Will this new model work for a gx470? I have seen gx’s with the r4t terminals but they appear different from what’s currently on sale
How do I purchase this??
what is the thread of all the posts on the r4t battery terminal?
What about us 2014 tundra owners
Will this work on my 100 series Land Cruiser? I got the slee battery tray upgrade with group 31. But I seen you only mentioned fj t4r or taco
@Runnin4Tacos
Жыл бұрын
It will work with group 31 batteries.
@adventureswiththeallens6087
Жыл бұрын
@@Runnin4Tacos Just an update for anyone wanting to know if it works for 100 series. The negative terminal cover sits too high and can’t close the hood. Right now I have just the positive terminal cover, i shaved the spacers about 1/8”. Although, in theory you should be fine with the negative terminals exposed I made a cover for the negative terminals out of a thin sheet of rubber i found just for peace of mind.
"It lastes longer" 😂😂😂
Naah!