oke here we go :) Just a small breakdown one more time - First we establish a quick form - Then we redo the parts for better control - Make sure the topology is holding - Connect the pieces together - Fix what is still necessary to fix - Detailing Also important to mention... you´ll see I do I lot of topology finetuning. This is gonna be necessary if we want to have very clean result -mario --

@tegkgiof

Жыл бұрын

Привет. Вы не отвечаете на почте по вопросам вашего платного курса. Куда вам написать ?

@purppwrld4950

11 ай бұрын

Could you explain your shortcuts ?

bro theres no way i watched through a whole 40 mins of that and didnt get bored, good vid btw, learned a couple things looking back

not only you are amazing modeler, but also have good music taste :) tnx for all these contents!!

@Elementza

Жыл бұрын

Nice, thank you :)

just wanna thank you. because you are only one who is showning production stuff that detailed. I also kinda recognise your work now, because you have same pretty good method across all your models. Very good job :)

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

First tutorial that I see complete 🥰 great work flow

The best topology tutorial😍

Amazing tutorial as always. Thank you!

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

A retopo class wow, we needed that.

Great Tutorial, Learned a lot.

12min mark was absolute orgasm to watch you handle the edge flow of the rounded piece.

Amazing work 🎉🎉🎉

Thanks for creating spacial tutorial on typology skill. Kindly make more like this.

For the algorythm ! Thanks , this is high quality knowledge !

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

good job like everytimes

Hello, thanks a lot for the video. You are very good at modeling. I emphasized a lot for myself. I wish you good luck in your work.

thank you very much bro 👍

I can watch your vids for hours :D

amazing tutorial, once again thank you so much.

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

You are great!

Thanku so much for this amazing tutorials sir ❤

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

Your technique is absolutely fantastic in topology and very helpful I am using Blender but I have learned a lot from you Thank you for sharing these videos .

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

I always enjoy a lot your modeling videos and try to replicate it myself Thank you so much for this!!

@Elementza

Жыл бұрын

You're very welcome!

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

Incrível!🤩

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

Awesome! Thank you very much

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

Thank you! These lessons of practice cheer up and expand knowledge)))

@Elementza

Жыл бұрын

Glad you like them! :)

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

Great

Nice use of the Deus Ex soundtrack! Main menu theme Mankind Divided

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

U r greatrrrrr

better..as always

I already spent £150 on the Maya Masterclass... Can I use those same techniques or do I really have to buy this course? I don't feel like spending an extra £100 if I can just use the Maya Masterclass to do the same thing.

That's some awesome workflow, really enjoyed watching though it. Just a quick question, is there any way we can know the shortcuts you are using? Because my mind was blown in 4:52 when you made those cuts.

how can i make my maya options look crispy like yours? awesome vid btw

The idea of using messy geometry as the reference completely blew my mind so I can use booleaned stuff as a 3d reference i don’t know why i never considered that

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

Hi Mario. I practiced your topology tutorial before I was able to create them after watching your tutorials but two or three days later I had some issue with exactly those practices which I was able to do after watching your tutorials!

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

@hamidsalami7022

Жыл бұрын

@@jasonpartle What's that?!

Hi Mario, can u please tell me how to did u change ur maya default material to that cool looking skin material...!!!

best

You’re not Mario, you’re a bloody legend

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

Thanks man, you are amazing 🤩!!!

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

It is Ele-Mentzal to do Hard Surface in Sub-D ////

How your faces are like that smooth and it is totally different from my objects. You object is looking like it is in blender. How to do that

fixing quads is like watching someone solving sudokos

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

Do you have a video on how to make your materials for modeling because it looks so much easier to work on with those phongs and such

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

How to motivate yourself towards modeling please tell me 🥺

Sexy maya tuts, always welcome, thanks man

@Elementza

Жыл бұрын

Lol nice... appreciate it :)

I´d like to know if in the workshop this video is done with explanations or is it like here just with music?

@Elementza

Жыл бұрын

There are 34 Videos in total, and 2 are not narrated, but we do a complete breakdown of what is done and why. All Videos are real-time explanations and case studies, there are no speed timelapses. Hope this helps

Thank you ;) I like the design of this component. I don't think I'm great at modeling, but after this video i think i knows nothing as Jones Snow.

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

Hello there... Question: Is there a way to unwrap a model in Maya? Not the UVs -- but the model itself? I have a cone that's been boolean-cut in the top and bottom, and at an angle. My boss needs to manufacture this thing, and wants to know the shape of the metal piece he's going to need. Thank you.

I moved to Maya after using Blender for a couple of years and I find this software really frustrating by how unsmooth the workflow is, but your video gives me hope.

@Elementza

Жыл бұрын

Maya has a rough start but once you learn the basic hotkeys, in combination with marking menus, worflow is very fast

@copyright24

Жыл бұрын

@@Elementza Yeah it's this point that slows me down so far, I just spend more time clicking everywhere more than my model. Is your video from 2 years ago UI&Hotkeys still valid (for the hotkeys) ?

@Elementza

Жыл бұрын

@@copyright24 Yes its still valid

@copyright24

Жыл бұрын

@@Elementza Thanks, I managed to improve my speed a bit with it. I have a small question, how do you cut the face at 6:30 ? I've been looking how to cut faces between 2 vertex but the only thing I can find online is to use the multicut tool and select the 2 points with it (I really don't like this tool for this purpose) and I couldn't believe a simple function like this wouldn't exist. I tried to look on the hotkey editor and tried a bunch of function but I couldn't find the right one.

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

Hey Mario, great video as always. I saw at 4:40 that you were manually filling in the endcap with the multi cut tool. I found a $2 script on artstation that does that automatically for you and I use it a lot. If you are interested, I can send you a link. I didn't want to just post a link straight away because idk how you would feel about that.

@Elementza

Жыл бұрын

Yes thank you, I already have few scripts for it but since this is part of topology class we'll do all manualy cause we talked reasons why connect stuff certain way. Thanks again!

@perluc_

Жыл бұрын

@@Elementza Well I did not think of it in that context. That makes a lot of sense.

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

How to do low-poly this model after? Retop by hands?

@Elementza

Жыл бұрын

There are multiple ways but yeah, its pretty simple shape so you can do it last too.

what a legend quick question: your thoughts on AI?

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

What was that music??

At last Maya people have someone on Arrimus 3D level )

I am trying so hard to make the models like you i just love hard surface but i dont know why i am not getting it right

@Elementza

Жыл бұрын

Practice and have patience... don´t just do it once and start something else. Once you complete this one or any other object, repeat the workflow 2,3 or 5 times if necessary. Practice small often and all the way through, rater than taking big projects and abandoning half way and starting new ones. Hope this helps :)

@mamtapatil1892

Жыл бұрын

@@Elementza thank you soo much, i will practice and i will reply to this comment on 15 December 2024 after this, exactly 1 year from now…thank you soo much please bring more and more videos because I am addicted😅

how are doing sir.

Hello, I'm a loyal fan of you. I have been wanting to buy tutorials on your website for the past few months, but not long after each payment, my order was cancelled. I don't know why. Can you help me solve this problem?

Noticed no one else mentioned how the most complex shape with the most planning just seemed to appear out of thin air. That being the cylinder shape with a 45 degree angle. I know how to do this but you just brought the shape into your scene like it was just a primitive. I think it would have been nice to show that process too to those learning. Other than that, great video.

Hey Man i'm a 3d Modeling Beginners I'm failing at making 3d modeling becoz lack of Confidence I cannot make by my self i can made it by just watching tutorials but not while doint practical project

@yograjmalviya424

Жыл бұрын

practice more tutorial

please add auto subtitles

Hello dear is this class for in indian student? I bought your classes bt it refunded.

Any chance you can show the UV process for these or similar models

@o.kiryukhin

Жыл бұрын

sometimes I unwrap like this: select sharp edges, mark them as seams, select everything and unwrap

@jasonpartle

Жыл бұрын

kzread.info/dash/bejne/nmaMo9t_npTHaNY.html

Mr. Mario, you are the topology king, but I have a question, where did you study and where are you? There is no information at all for you online. I sent you on Artstation and I would like to talk to you, can that, Mr. Mario?

@Elementza

Жыл бұрын

I did not went to art school, I´m mainly self taught :)

@arstudiocoo

Жыл бұрын

@@Elementza Oh my God, you are terrible on hard surfaces. What courses did Mr. Mario take?

@arstudiocoo

Жыл бұрын

@@Elementza I like you so much because I am Maya Workspace, just like you. Can I speak to you privately?

@arstudiocoo

Жыл бұрын

@@Elementza Can I pay a small amount of money to enter Discord?

@arstudiocoo

Жыл бұрын

@@Elementza Because I don't have enough money to buy a course

hEY THIS ONE FOR BLENDER PLEASE? ;(

@Elementza

Жыл бұрын

The same rules apply in blender too. Only difference is where the tools like extrude, slide etc are located but the rest applies to Blender the same

Send Your Shortcuts , am a student i can learn More from u