TIU E1: Chucks Jaws and Faceplates
Тәжірибелік нұсқаулар және стиль
In this first episode of 'The Tools I Use and Why I Use Them', we'll be taking a look at the chuck systems that I use, and their jaws.
Take a look here at the SuperNova chuck and the Axminster SK114 chuck. There is a separate video for the vacuum chuck system that I use.
Remember that as a professional turner, there are tools that may not be necessary for beginners and that multiple chucks are really not a necessity for most turners!
Important: This series of videos is neither sponsored nor endorsed by any of the manufacturers mentioned and the tools and equipment I present here have been purchased. Links may be provided to where you can purchase these items if you wish to.
Useful websites for Woodturners:
****************************************
Remote Demo Bookings: www.msabansmith.com
Tuition, Tools, Timber etc: www.thewoodturningshop.com
Hampshire Sheen. Find your nearest retailer: www.hampshiresheen.com/buy
Woodturning360: www.woodturning360.com
Woodturners Funnel Club: www.woodturnersfunnelclub.com
****************************************
Find Me on Other Social Media
Facebook: / msabansmith
Instagram: / msabansmith
Twitter: / msabansmith
****************************************
Small Print and Disclaimer: Woodturning can be dangerous. The project in this video is a demonstration of a woodturning project and as such may not be suitable for beginners. It is not intended to replace a physical lesson from an experienced woodturner.
At all times, you are responsible for your own safety, that of your workshop and other people in it. Ensure you wear suitable personal safety equipment at all times and follow all the manufacturers instructions for your tools, machinery and other products you may use.
This is my way of turning this project - Other turners may turn it differently and you may find your own way of reaching the same result.
By copying these techniques, you do so at your own risk.
****************************************
Please note that aside from my business interests, I am not sponsored by any of the companies whose products I use. Any review of a product is done so because I like the product. I will never review a product I do not like or not enjoy using.
Thank you for your understanding.
****************************************
The visual video content (including my voice), any text and any graphics in the video are Copyright © Hampshire Sheen Ltd (M. Saban-Smith Woodturning) 2015-2022. All rights reserved.
Пікірлер: 26
THANK u m saban that was good advice. I use nova really good. later will try Axminster set.
Great video Martin….very helpful and informative. Good to hear about your likes and preferences and why you like them.
@msabansmith
2 жыл бұрын
Hi Adrian. Thanks for watching. Most turners don't need all those jaws and chucks....but it is nice to have these 'toys', isn't it?
Very interesting video. Thanks for sharing 🌞
@msabansmith
2 жыл бұрын
Thanks for watching.
Cheers Martin. Thanks for sharing tools and tips.
@msabansmith
2 жыл бұрын
Cheers Mike. Hope you are well.
@mikedoyle5362
2 жыл бұрын
Thankyou. I am well. Hope you are the same. The business looks to be doing great. Congrats to you, Les and the team.
Very good video mate as always 👍
@msabansmith
2 жыл бұрын
Cheers Dan.
Good info Martin, cheers
@msabansmith
2 жыл бұрын
Cheers Gaz.
@GavSedae
2 жыл бұрын
@@msabansmith Your welcome, but whos Gaz lol
@msabansmith
2 жыл бұрын
Ummmm....sorry, Gav!
Great video. Would you please comment on the issue of chuck size versus lathe size? I bought an SK114 only to find out that although I have a 1 1/4 in. spindle, the bearings and spindle itself will not support the SK114 and a somewhat large blank. This was very disappointing obviously. Living in New Mexico USA doesn't allow me to actually see most of the kit I purchase beforehand. That has led to several pieces that just get stuck in a drawer somewhere and forgotten, expensively.
Nice to see you back on KZread Martin. Do you know when/if there'll be a turning video? Geoff
@msabansmith
2 жыл бұрын
Thanks for watching Geoff. Turning video? Hmm....soon I expect, I have an oak crotch piece to turn for a customer.
Finally a video again!🥳 Edit: the big nova jaws are 130mm I think
@oliice3559
2 жыл бұрын
Hi Elias Your absolutely correct, they are 130mm Jaws. I own 3 - SC4's and 2 - SC3's Record Power Chucks, which are very similar to Nova & Rikon, if not the same. It's a Sham Martin could not rely to you query!? As for button Jaws. Why!. A home made plywood disc with router matting does the same job. (No expense). and even Colwin Way has said that. Hopefully Martin's feed back would help. LOL
Very informative and helpful video. Lots of ideas to put on my birthday wish list! I've haven't tried using a worm screw yet; is there a 'rule of thumb' when drilling a hole to accept the worm screw i.e. the drill diameter being so many millimetres less than the worm screw itself?
@msabansmith
2 жыл бұрын
Thanks for watching. From memory, the drill for the worm screw is 8mm. Gives a good tight fit. Other worm screws need a different size bit, though.
I have a stronghold chuck from oneway. Do you know what other manufacturer's jaws will fit on to it?
Hi Martian can I ask u wot finish u put on ur black bowl u made ie: wot did u use till blacken the wood then finish cheers love the video
@msabansmith
2 жыл бұрын
Thanks for watching. Which black bowl? There isn't one in the video.
Great video, quick question, where did you find the jaw holders on the wall? Stay safe.
@msabansmith
2 жыл бұрын
Thanks for watching. I got the jaw holders from Axminster tools. Expensive for what they are, but solves a problem and saved me time making my own.