I think that kitchen is brilliant. I love the magnetic lightbar. I would probably get one of those fast pop-up awnings to go over the backside of the suburban. I do think it would be better to have the fridge back with the kitchen. Cool design!

By far the nicest one I've seen! Outstanding!!

Really liking those Grey ends. The side storage is slick

Looks fantastic!!! (and familiar, LOL). I am loving mine! Can't say enough about Tim's precision work and attention to detail.

@everventurecustom

2 жыл бұрын

Thanks Elizabeth! I appreciate the comment. I hope your getting a lot of use out of yours.

VERY VERY nice job, gives a guy some GREAT ideas, thanks for the video.👏🏻 👏🏻 👏🏻 👊🏻 👍🏻

That's a pretty cool build.

What a great built i ever watch!

You guys do beautiful work.

Really nice rig, looks well made and clever.

That's an excellent build. Way to go😎👍

Gosh u men are geniuses. I love all ur builds keep them coming…

Ok. Finally found one that’ll work. Fair warning I’m stealing your idea 😂. I’ve been watching, Jesus….about a a million of these pull out videos. I have ply just sitting out there, pre finished, ready to go. I’ve already got the sink, faucet, lights (shorter but the same ones), etc. (need the slides, 48” slides are not something I stocked in my cabinet shop). All ready figured I’d put the fridge on a slide on top of the base. Solar on top, battery and electronics where the tire went, tire to the roof rack. Gonna do a wraparound awning with a shower up top. I don’t sleep in my Sub…I’ve tried, just can’t get use to it, so I have a queen sized cot tent. It was the configuration of the box I kept going back and forth on. Nice build. Thank you for the inspiration/answer. You just got a subscriber 😁👍

@visamedic

Жыл бұрын

And I like the tip up shelf. It did look like it sloped. I’ll cut a wedge and attach to the bottom to level it out

That looks awesome 👍🏻👍🏻👍🏻🔥🔥🔥

Great build man

You should do a build video on how you built all this and where you sourced everything from. that would be awesome! Love the work though considering it lol

Nice job man! Im about to attempt something similar (not nearly as nice as yours) with my 2004 Chevy Suburban 1500 LT (RWD). Im no enthusiast, l’ve decided to live in my Suburban because the cost of living in Los Angeles, California is 100% 😂 And I have some personal goals that require a sacrifice to achieve in a timely manner. So I am about to be enthusiastic about having a power supply system that can run and operate an “outstanding 12 V Air conditioning unit” perpetually, from May to October. I live by Edwards Air Force base, and it is very hot in the “Antelope Valley.” A dry stuffy 105 degrees F. is the comfy average ( in recent years) Also, I have never seen any antelope here. I have seen the thermostat read 155 F inside my SUV with an ambient temperature of 92 F outside. So I think i should try to insulate a lot. And I love the color, but black in the desert is problematic for me, lol.

Love it.

Great work, that looks awesome💯‼️I have a 04 Z71 Chevrolet Suburban I've been wanting to convert...instant sub and 👍🏾

@everventurecustom

2 жыл бұрын

Hey man Thanks for the Sub! If you decide to have it built out and want someone to do it let us know. Thanks for the comment.

brilliant

Very nice truck 💪

Iam from India superbly shared n shown nice goodluck

Undoubtably one of the slickest rigs ive ran across for my application. Thanks for sharing, post links, please?

I really love this it is so amazing!! Can something like this be done in a 2013 chevy suburban ltz and still be able to seat 3 kids 2 adults?

I really like your builds - great jobs👍. You might want to check out the torsion hinges from Rockler to use on the side cabinets as an option instead of the piano hinges. They should hold the doors up, making it easier for the users. What type of insulation are you putting above the tongue and groove ceiling?

@everventurecustom

2 жыл бұрын

Thanks for the comment Kevin, we’ll definitely keep the hinges in mind. For insulation, we always use wool as it is a bit more environmentally friendly.

Nice

Does your agency offer a platform build you can access everything from the inside? I went to your website, but I didn't see pre-set plans (more like custom work).

I have a 99 burban that's 4 wheel drive that my parents bought me back when I was in highschool. It's been 14 years but I still have her! I resently bought my brother in law's 99 burban that don't run so we're going to make the one that don't run into a camper. Pull the motor put a water tank in the engine bay. I have tons of ideas for it. I'm going to make the one that don't run into a trailer then il pull it with my OG burban

@everventurecustom

2 жыл бұрын

Sounds Awesome Eric! Good luck on your build and hopefully you post it on KZread so we can check it out.

Nice. I have a 1995 4WD Suburban...looking to do the same and really intrigued by the rear bumper and tire swing arm. Can you provide any more info on that?

@everventurecustom

2 жыл бұрын

The bumper was provided by the customer through a company called MOVE. it comes in parts and we welded it up for him. Then we added a tire swing to get the tire out of the cab area. The tire swing was custom made by our welder.

Hey trying to do a build out and use a drawer system like that for my bed on the inside, what kind of drawer system is that if you dont mind me asking? I seen one where it would hold up to 500 lbs, I believe it was another of yalls video.

@everventurecustom

2 жыл бұрын

Hey Josh, Yeah the drawer slides are from a company called Shuhang on Amazon. They come in all sorts of sizes but the 56" ones like in the video run $215 for the set. They are really good quality too. They say they can hold 220Kg (roughly 500lbs). Keep in mind the slides might hold that the the drawer box itself might not. Hope that helps.

Do you build those swing out table legs yourself? I could really use a couple sets of those and would love to find out where you get them from.

@everventurecustom

2 жыл бұрын

We bought some telescoping legs and redesigned them to fit. We welded up a center support in the middle and created a bracket to mount to the table. Unfortunately we don't sell just the legs.

Link all materials or reach out pls planning stage on my conversion this is awesome

I have a 2002 chevy Tahoe z71 how much would you charge me to build one

Hello buddy, cool travel car build! I correctly understood that a part from h2 was used for the spare wheel bracket? Please tell me, do craftsmen in the USA build a panoramic sunroof into the gmt400? Looking for a video or any information about it. Thank you.

@everventurecustom

11 ай бұрын

Not sure about the sunroof. I haven’t seen anything like that. The bumper and wheel bracket was welded by us at the shop. The bumper is from a company called MOVE bumpers and the wheel bracket I purchased from a 4x4 place. Then we custom fitted both pieces together.

@eichhornchenmafia

11 ай бұрын

@@everventurecustom thank you for the answer, very interesting. It is a pity that there is little information regarding the sunroof. In these cars (gmt400), it is almost without rounding as on modern cars, I found a similar roof only on Mitsubishi Pajero 2, the same smooth and only a little rounding from the windshield to the beginning of the hatch, then exactly... I found a sunroof (kit) and I think the installation should not be very difficult. The spare tire bracket and bumper turned out very cool, congratulations!

Nice build!!! I have a 97 project I just started. What tire carrier is that? I didn't see anything the Move has that resembles that.

@everventurecustom

2 жыл бұрын

We custom built it or this vehicle.

@georgehanna3434

Жыл бұрын

How can we get one like it?

Why not roof mount. The spare?

Where are you located and what do charge for this build? I have an 02 Yukon XL. Thanks!

@everventurecustom

2 жыл бұрын

Hey Pierre, We are located in Evergreen Colorado. Check out our website EverVentureCustom.com and fill out a contact form. That will send me a direct email where we can discuss what your looking for and I can get you pricing for your build.

Welp. That seals the deal. My old Suburban is getting repurposed.

What is the sitting height from the mattress to the ceiling? Many thanks!

@everventurecustom

Жыл бұрын

Just around 26 inches.

Is it possible to build out the back while leaving the middle row bench?

@everventurecustom

Ай бұрын

Yes it is.

2003 saburban 1500, about how much a cost compared to if I did it

Where you buy the leg for the table?

@everventurecustom

Жыл бұрын

Sorry for the late response. We actually custom make the legs for the tables.

Link for mattress? Or where did you get?

@everventurecustom

2 жыл бұрын

We get the mattresses custom made for each of our builds.

I need this spare tire mount.

@everventurecustom

2 жыл бұрын

Love to hear that! Everything we do is custom so we would need your vehicle for reference. Feel free to send us a message through our website (it goes to all our emails) and we can discuss specifics.

@ShortArmStrongArm

2 жыл бұрын

I’m studying on it.

What do you charge for a build like this just out of curiosity I got a 99 suburban I was thinking about building

@everventurecustom

2 жыл бұрын

Thanks for the comment. More info on pricing can be found on our website www.everventurecustom.com/

That’s “kinda” cool.

what would a build like this cost

How can I get a Van like this

@everventurecustom

8 ай бұрын

We also build vans too

about what's it cost to do a suburban?

@everventurecustom

2 жыл бұрын

Hi Dustin! Pricing for this build starts around $12k. Come visit us at www.everventurecustom.com and submit a contact form if you'd like more information.

Your videos are great, but the music is 20x too loud...Annoying :)

takes way too much work to set up the 'kitchen' area then put away. It's not something that would be useful as a daily kitchen.