This Is Why Your Spinning Reel Drag Isn't Clicking

Ойын-сауық

Is your spinning reel drag silent?
This is a common problem that anglers run into and in this video, I'm going to show you how to identify the root cause of it.
It could be because of the way you spooled your reel, or an issue with the internal clicking mechanism, but the good news is that it's pretty quick and easy to find the issue.
Then, once you've identified the problem, you'll be able to fix it and get back to hearing that beautiful drag screaming again!
Have any questions about how to fix a silent drag on your spinning reel?
Let us know in the comments below!
P.S. Want to get our best fishing spots and tips, plus discounts to our online tackle store? Click here to join us in the Insider Club: bit.ly/2ByzHhc

Пікірлер: 91

  • @Saltstrong
    @Saltstrong4 жыл бұрын

    Want to get our best fishing spots and tips, plus discounts to our online tackle store? Click here to join us in the Insider Club: bit.ly/2ByzHhc

  • @EasterlyWind
    @EasterlyWind2 жыл бұрын

    That clicking sounds convinces me the fish are bigger so gotta fix that . Thanks for the Tips

  • @Bogus6

    @Bogus6

    2 ай бұрын

    Omg same

  • @jimmychang1913
    @jimmychang19134 ай бұрын

    Thanks for this video! Just brought a reel from Salt Strong - Daiwa Fuego 2023 and was trying it out today with some braided line and I thought the drag was broken until I watched this video. Put some mono on it from beginning so it can catch on the spool and tied it the remaining with braid, work out great!

  • @terryhartley7749
    @terryhartley77493 жыл бұрын

    I have been dealing with a drag issue from 3 reels. This is the only video I’ve found that touched on the free spooling issue. Thank you

  • @saltymoonfishing
    @saltymoonfishing4 жыл бұрын

    I have certainly had this happen before in the past and it took a lot to figure what was going on. I thought something was wrong with my reel! Another great video tony!!! 👍👍👍

  • @ericlamontagne5060
    @ericlamontagne50603 жыл бұрын

    Thank you for this video! I was going crazy trying to figure out what was wrong with my reel but this video saved me!!

  • @lggIII
    @lggIII4 жыл бұрын

    Very good and informative video, for such a common and simple issue. Well done guys. Another well done video.

  • @sperob1
    @sperob12 жыл бұрын

    Thank you Tony! That tip on re-spooling helped me with my drag problem!

  • @catboyzee
    @catboyzee2 жыл бұрын

    Great info, just what I needed to know. Thanks for posting.

  • @Tsgraphix1987
    @Tsgraphix19874 жыл бұрын

    I have the same problem on a couple of my reels. I'll have to see whats going on after watching this. Thanks Tony!

  • @Carptrek
    @Carptrek Жыл бұрын

    Very helpful. Thankyou. I was going to send my reel off for servicing. Thanks to your advice I don't have to.

  • @Saltstrong

    @Saltstrong

    Жыл бұрын

    Glad it helped!

  • @nicholasbrown1902
    @nicholasbrown19024 жыл бұрын

    Great video, this helped me a ton. Fixed a few reels. 👍

  • @PSRhostguy
    @PSRhostguy3 жыл бұрын

    Thank you so much. I've been fishing for 30+ years and I didn't realize my braid was free spinning, I went and bought a new reel🤦‍♂️

  • @jbjohn3437
    @jbjohn34374 жыл бұрын

    Great video Tony!! I had a dab of grease on my Penn drag clicker last year and it took me three tries to figure out the problem. Wish I'd seen your video first! Thanks again! jbj

  • @tysonrees1951

    @tysonrees1951

    2 жыл бұрын

    How’d you get the grease out?

  • @JDCTV38
    @JDCTV383 жыл бұрын

    great video.. thank u for this tutorial very helpful.. 👍❤️

  • @garrett961
    @garrett961 Жыл бұрын

    I appreciate this video bc my clickers spring was out of place but I put it back in place and boom. My drag is back. Thanks

  • @Saltstrong

    @Saltstrong

    Жыл бұрын

    You're welcome!

  • @michealcramer7755
    @michealcramer77554 жыл бұрын

    Very interesting. I learned a couple of thing.

  • @eliusanabria3037
    @eliusanabria30374 жыл бұрын

    Worked perfect thanks !👍🏼

  • @opusofthenight
    @opusofthenight2 жыл бұрын

    This was super helpful. Had grease on there.

  • @michaelrourke9830
    @michaelrourke9830 Жыл бұрын

    Awesome video! Very helpful, and even saved me from buying a new reel.

  • @Saltstrong

    @Saltstrong

    Жыл бұрын

    Glad it was helpful!

  • @wernerbotha1076
    @wernerbotha107610 ай бұрын

    Came accross your video and as it turns out, when servicing my reel I'd gotten some grease on the clicker. A quick silicone lubricant spray and a wipedown and the drag click sounds literally good as new! Thanks for the video mate.

  • @Saltstrong

    @Saltstrong

    10 ай бұрын

    Glad we could help!

  • @Flowerofkindness
    @Flowerofkindness2 жыл бұрын

    Thanks so much!

  • @truckinghell1655
    @truckinghell16553 жыл бұрын

    Been having this problem.with my new reels after fitting more washers for better line lay going whip.them.out and see how I get on

  • @wilsocn
    @wilsocn2 жыл бұрын

    This will probably be in the extreme minority of cases but I have a couple of Penn Pursuit iii 3000 series reels that I love and the drag clickers work just as expected. I bought a 4000 series last year and the drag was silent. I took it apart and the factory had placed two nylon washers over the gear instead of one and it was preventing the metal tab from connecting with the gear and making the clicking noise. I removed one of the washers and it clicks away now. Just a thought in case anyone else gets stuck.

  • @owenbosen4254

    @owenbosen4254

    Жыл бұрын

    Those nylon washers are called spool spacer washers. Washers are added, to move the spool upwards in case you find that the line on your spool is piling up towards the upper lip of the spool. By adding washers you will now find the line has moved more towards the bottom of the spool. In some cases this upward or downward adjustment of the spool by adding or removing spool washers puts the clicker mechanisim and the clicker gear out of alignment and the clicker fails to produce any sound.

  • @BasicFishingNZ
    @BasicFishingNZ4 жыл бұрын

    nothings worse than a silent drag clicker especially wen u leave ur rod for a big fish to bite or when ur fighting the fish and the fish fights back

  • @bennyjbenham
    @bennyjbenham2 жыл бұрын

    First time I've used my Abu Garcia Max STX reel today and after half a dozen reel ins the clicker stopped working WTF.thanks for this vid I will check it tomorrow.

  • @townieoutdoors8121
    @townieoutdoors81213 жыл бұрын

    Hey can you recommend a quality budget reel for a 6 to 7 foot spin rod for fresh and sea trout fishing

  • @Gio-nl7eg
    @Gio-nl7eg4 жыл бұрын

    I’ve had this problem happen from adding too many washers trying to fix line lay. I had to settle for mediocre line lay in exchange for hearing my drag

  • @Arnolschuachenegga

    @Arnolschuachenegga

    4 жыл бұрын

    Your comment saved me many minutes of frustration. Thanks man

  • @Gio-nl7eg

    @Gio-nl7eg

    4 жыл бұрын

    Ace no problem I went through so much just to learn that little tip I was hoping it would help someone else too haha Glad it did

  • @Mirkwood50
    @Mirkwood502 жыл бұрын

    Thank you for that 👍

  • @Saltstrong

    @Saltstrong

    2 жыл бұрын

    Any time!

  • @gez1972
    @gez19722 жыл бұрын

    What a legend put a drop of oil on the clicker tap return spring and the noise has come back. It must of siezed. Thanks man....

  • @stefannmarkram7589
    @stefannmarkram75893 жыл бұрын

    U can also push the clicker gear down to the bottom which works

  • @bstceltics4
    @bstceltics42 жыл бұрын

    My lever was sticking and there was grease on my clicker so i cleaned and oiled it, and everything moves greely now, thank you for the advice 😁

  • @tysonrees1951

    @tysonrees1951

    2 жыл бұрын

    How did you get the grease out? It’s possible I got grease in there can’t seem to get it out

  • @bstceltics4

    @bstceltics4

    2 жыл бұрын

    @@tysonrees1951 i used a microfiber towel and kept wiping it all out and then worked the lever back and forth with a dab of oil until it started working

  • @tlm6021
    @tlm6021 Жыл бұрын

    Ty!!!!!!

  • @Saltstrong

    @Saltstrong

    Жыл бұрын

    You're welcome!

  • @mikelimks
    @mikelimks3 жыл бұрын

    There are many ways to repair or modify the broken clicker. And the Indonesian KZreadrs even create a new clicker to make the drag sound louder. I tried some of their methods and my reel's drag is louder than the original sound.

  • @304_sawyer
    @304_sawyer2 жыл бұрын

    what do i do if i’m missing a spring?

  • @ktmdays
    @ktmdays2 жыл бұрын

    Also on my spinfisher 7500 if you remove the spool the shaft had a gear and that's not so post to spin and that Will make it not click got to not spin on shaft

  • @mickmouse92
    @mickmouse92 Жыл бұрын

    Dang. From day one my shimano sperros has had a few issues including the ghost drag. The prawl spring is all bent and won't keep the point straight to hit the gears. My wife uses a fresh water Abu that cost less than half this shimano and its so much smoother and comfortable.

  • @Saltstrong

    @Saltstrong

    Жыл бұрын

    Thanks for sharing, both are great brands though!

  • @ThomasMcKnight-pj5vu
    @ThomasMcKnight-pj5vu3 ай бұрын

    I'm having that issue where the drag sounds weak can I use 91% rubbing alcohol to clean the spring of the drag

  • @Tr1sty.
    @Tr1sty. Жыл бұрын

    very helpful i hooked into a 8 foot gator in the river and after he popped my line i was setting my line back up and couldn’t hear my drag turns out the spring thingy is completely gone

  • @Saltstrong

    @Saltstrong

    Жыл бұрын

    Glad it was helpful!

  • @premgautam2099
    @premgautam20993 жыл бұрын

    My fishing reel lock is not working . I want to fix this please guide me if you can

  • @bvannt3502
    @bvannt35023 жыл бұрын

    What do I do if the clicker itself has broken off? Is the drag permanently broken or is there other fixes?

  • @mikelimks

    @mikelimks

    3 жыл бұрын

    Check out the Indonesian KZreadrs modifying the clickers for louder sounds and repair broken clickers.

  • @fishinfrenzyoutdoors
    @fishinfrenzyoutdoors Жыл бұрын

    Hello, hoping you’re still checking comments. What’s happen to my reel is when the drag is tightened down tight the clicker stops working. When I loosen up drag the clicker works fine.

  • @Saltstrong

    @Saltstrong

    Жыл бұрын

    Hello! Please visit our website to view the full blog. You can post your question there for our coaches and team to respond too. You can find it here: www.saltstrong.com/articles/fix-silent-drag/

  • @RileyAmanda-w2v
    @RileyAmanda-w2v19 күн бұрын

    The spring and all isn’t on reel when I opened it up to see

  • @jameswhiteman3548
    @jameswhiteman35483 жыл бұрын

    I locked down my spinning reel to wash it down and get rid of some of the saly corrosion. I locked it down a bit too much and now the drag knob to adjust the drag pressure no longer clicks and its really annoying me

  • @jedediyahaaronyisrael7118

    @jedediyahaaronyisrael7118

    3 жыл бұрын

    Did you resolve the issue? Which reel is it?

  • @MindCatcherFishing
    @MindCatcherFishing Жыл бұрын

    loved your video but it's not my issue when uve taken your drag button off the reel to maybe change the spool when you put the drag button back on as your tightening it that also should click my button isn't

  • @Saltstrong

    @Saltstrong

    Жыл бұрын

    Might want to contact the manufacturer to get that resolved

  • @jpt2026
    @jpt20262 жыл бұрын

    What to do when the clicker breaks?

  • @Alexleyva-rt6nl
    @Alexleyva-rt6nl Жыл бұрын

    My issue is even w the drag tightened all the way the drag is still able to come out as if not tightened at all and still no sound. Help?

  • @Saltstrong

    @Saltstrong

    Жыл бұрын

    Thank you for your question! We have a massive library of fishing tips on our website along with a search feature to let you quickly filter down to find help you're looking for, so just go to www.saltstrong.com/ and use the Search feature in the top menu.

  • @thebattousai
    @thebattousai4 ай бұрын

    The actual knob doesnt make a clicking noise

  • @toddysinc
    @toddysinc Жыл бұрын

    👍

  • @Saltstrong

    @Saltstrong

    Жыл бұрын

    Thanks for watching!

  • @johnericbabiera1205
    @johnericbabiera12053 жыл бұрын

    My reel is not clicking. The spring you show under the spool is broke. How can I replace it. Thank u. More power! Godbless.

  • @jedediyahaaronyisrael7118

    @jedediyahaaronyisrael7118

    3 жыл бұрын

    Order a replacement from your the manufacturer

  • @caden_beers
    @caden_beers2 жыл бұрын

    My tab thing doesn’t bounce back so what do I do

  • @Saltstrong

    @Saltstrong

    2 жыл бұрын

    Great question! Make sure to ask this over in the Community (www.saltstrong.com/) where the coaches spend their time.

  • @holdenharvey783
    @holdenharvey7832 жыл бұрын

    My little metal clicker broke and I can’t find another one to order

  • @user-pv4gy8yg8l
    @user-pv4gy8yg8l6 ай бұрын

    Myne still doesn’t click I don’t know what is wrong with it

  • @terrygivens4874
    @terrygivens48743 жыл бұрын

    4

  • @kadeholeman4449
    @kadeholeman44493 жыл бұрын

    Ok do I need a silent drag?

  • @Barisdagame
    @Barisdagame3 ай бұрын

    Iq don't want the drag

  • @mathewschofield6053
    @mathewschofield60535 ай бұрын

    Refund I think no more shamano

  • @markwallace1251
    @markwallace12512 жыл бұрын

    Proper spacing washers make all the difference in the world, ask me how I know... 🤣

  • @tysonrees1951

    @tysonrees1951

    2 жыл бұрын

    Are you talking about the washers on the shaft the spool is held on? How do I tell if they’re properly spaced that could be my problem

  • @markwallace1251

    @markwallace1251

    2 жыл бұрын

    @@tysonrees1951 yes sir, every reel is a little different. Some have one washer on the bottom and one on top of the drag gear, but they can be different thicknesses, and sometimes there's more than one stack together. It's super easy for one to fall off when you take the reel apart without noticing, or to put the washers back on in the wrong order...

  • @tysonrees1951

    @tysonrees1951

    2 жыл бұрын

    @@markwallace1251 ah I took the bottom washers out and most likely put them back in the wrong order time to find the right order some how😂 Thank you 🙏🏻

  • @donb1661
    @donb16614 жыл бұрын

    Really? This requires an explanation.

  • @tonyacevedo3149

    @tonyacevedo3149

    4 жыл бұрын

    Based on the great feedback we have had, yes.

  • @jedediyahaaronyisrael7118

    @jedediyahaaronyisrael7118

    3 жыл бұрын

    Don B, take your silly condescension elsewhere.

  • @slliks67
    @slliks67 Жыл бұрын

    DAIWA Procyon is not built like that, do you know anything about that reel . The drag click has disappeared.

  • @Saltstrong

    @Saltstrong

    Жыл бұрын

    Please check out the full blog here: www.saltstrong.com/articles/fix-silent-drag/. You can post a question there and our coaches can answer it directly. Thanks!

Келесі