This Is Actually Dangerous Arctic Budget M2 Pro PCIe NVME SSD Cooler

#arctic #m2pro #pccooling #arcticcooling
This is actually quite dangerous! Arctic Budget M2 Pro PCIe NVME SSD cooler
Today we are looking at the NEW @ARCTIChannel Arctic M2 Pro m.2 drive cooling heatsink.
It was cheap on Amazon, so thought i would buy two, one to review and one to giveaway to a "lucky" viewer.
After this experience i will be arranging an Amazon return as soon as i can and would suggest that anyone lured in by the cheap price, think twice and watch this video before parting with any money.
It is a shame as for the money it actually performs really well and very close to Gen5 cooler.
Being so small it will also be useful in a PS5 or PS5 Slim.
I hope that Arctic, watch this and can learn from it and maybe there will be a revised version that has a shorter length, and easier to ply open. I think that Arctic's attention to detail and close tolerances have actually worked against them in this instance.
The links below may be affiliated, meaning we get a small commission from them if you make a purchase. It won't cost you any extra, but really can help support us and the videos we make.
Available from affiliate links:
Amazon UK amzn.to/3W0kNXE
Amazon USA amzn.to/3RMHJXQ
Amazon Global amzn.to/3L0TENW
Ebay UK: ebay.us/3ekjZ6
Ebay US: ebay.us/A5mP35
Ebay CA: ebay.us/UJgsg0
Ebay AUS: ebay.us/BBwhWv
Cheap Windows 10/11 Office/ Steam & Gaming Keys available from affiliate links:
www.premiumcdkeys.com/mikesun...
Discount code: MIKESUNBOXING 7.5% Off
Unboxing Playlist: • Unboxing
Computers & Gaming Playlist: kzread.info?list...
Thanks for watching! If you want a mikesunboxing classic t shirt or mikesunboxing dual action stylus pen or need some specific advice or help maybe consider becoming a Patreon supporter here: www.patreon.com/mikesunboxing or
KZread membership: / @mikesunboxing
Send donations to paypal.me/mikesunboxing
Buy NEW MUB merch here:
EU & UK: shop.spreadshirt.co.uk/mikesu...
North Americas: shop.spreadshirt.com/mikesunb...
Most of the items we review can be found in Our Amazon influencer Storefront:
www.amazon.com/shop/mikesunbo...
We earn commission from some affiliated links if you make a purchase
Affiliate links:
Ebay UK: ebay.us/g4XxLe
Ebay US: ebay.us/68JcLl
Ebay CA: ebay.us/IR59Bt
Ebay AUS: ebay.us/db0b6x
Earn £50 by switching Energy suppliers - we did! share.octopus.energy/rose-gro...
Get 20% off postage at Parcel2Go either in the checkout mention Mike Churchill or use this link parcel2go.mention-me.com/m/ol...
Pay For Items Monthly: www.shopabunda.com/?ref=mikes...
Amazon UK: amzn.to/2S8k1Fv
Amazon US: amzn.to/2Xs1YuR
Amazon CA: amzn.to/2RVkRFa
Amazon DE: amzn.to/2W4U49T
Amazon FR: amzn.to/2XkA8Bx
Amazon ES: amzn.to/2KiQVRB
Amazon IT: amzn.to/3w25K38
Amazon AUS: amzn.to/303ycku
Amazon JP: amzn.to/3jRdmwS
Amazon Sweden: amzn.to/32bdBLk
Amazon Locally.Link: locallylinks.com/ and our affiliate code: Mikesunboxing20
Q Link: share.shopqlink.com/589.html
www.premiumcdkeys.com/mikesun... (discount code MIKESUNBOXING)
GTRacing Ace Series M1 link EUR: gtracing.eu?aff=74
US: www.gtracing.com?aff=915 Discount code: Mikesunboxing
Knockies: www.knockies.com/?rfsn=261416...
Get in touch with us:
Email mike@mikesunboxing.com
KZread / mikesunboxing
Website www.mikesunboxing.com
Discord: / discord

Пікірлер: 116

  • @mikesunboxing
    @mikesunboxingАй бұрын

    Available from affiliate links: Amazon UK amzn.to/3W0kNXE Amazon USA amzn.to/3RMHJXQ Amazon Global amzn.to/3L0TENW Ebay UK: ebay.us/3ekjZ6 Ebay US: ebay.us/A5mP35 Ebay CA: ebay.us/UJgsg0 Ebay AUS: ebay.us/BBwhWv

  • @ARCTIChannel
    @ARCTIChannelАй бұрын

    Thank you for taking the time to provide your feedback. We are truly sorry to hear about your experience with the M2 Pro Cooler. Please know that we take all customer feedback very seriously and have shared your comments with our engineering team for further review and improvement. We also want to highlight that our user manual includes a recommendation to wear gloves for safety purposes while using the product. Your satisfaction is our top priority, and we appreciate your input as it helps us to enhance the quality of our products and services. If you have any further concerns or suggestions, please do not hesitate to reach out to our customer support team.

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    thanks for getting in touch, i hope my experiences are useful in the ongoing improvement and evolution of the cooler. I would maybe suggest asking users to wear protective gear during installation and removal, as at present it only suggested PPE during disassembly. and maybe in the next batch get those edges rounded off a little more, and reduce the overall length a few millimetres to ensure compatibility and ease of installation. In terms of performance, you nailed it. But the user experience wasn't great.

  • @LuisRiveraRomero

    @LuisRiveraRomero

    16 күн бұрын

    I just got mine, and was looking for videos of how to open this. Is lmos impossible, you have to push down with heavy force and then try to slide open. You can really get cut doing this if you slip. So far I can't open mine. The video in Artic page of how easy it opens is 100 times different to the actual experience, I will try some lubricant but I'm afraid to damage the thermal gel pad.

  • @PapaMav

    @PapaMav

    15 күн бұрын

    At least it can be said, Arctic is a class act vs a class action...

  • @matthewday7565
    @matthewday7565Ай бұрын

    I've already made the blood sacrifice to the gods of PC building

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    Me too 😀

  • @lamikal2515

    @lamikal2515

    Ай бұрын

    If you don't, they'll refuse to make it boot properly.

  • @williamoppe7817

    @williamoppe7817

    Ай бұрын

    Blood for the Blood God - Skulls for the Skull Throne

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    @@lamikal2515 Lol!

  • @charlesballard5251
    @charlesballard5251Ай бұрын

    I spent 23 years as a courier. I pulled my back a few times lifting heavy loads, one time doing it so bad I had to go home on the Friday it happened, and then I didn't go in to work on Monday. But I never bled as a courier. Now the few months I spent in late '98 building computers is a different story. Poking around in computer cases banging my knuckles on sharp edges and STABBY motherboards and add in cards caused me to BLEED!!! I feel for ya, Mike. Take care.

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    thanks Charles

  • @thefreedomhouse1984
    @thefreedomhouse1984Ай бұрын

    I didn’t know Arctic made box cutters

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    lol 😂

  • @Lurch-Bot

    @Lurch-Bot

    Ай бұрын

    Cuts better than the last cheap pack of blades I bought.

  • @defectiveclone8450
    @defectiveclone8450Ай бұрын

    I have the Be Quit nvme heat sink.. its easy and doesn't cut me

  • @mikesunboxing
    @mikesunboxingАй бұрын

    Let me know your thoughts on this? Do you expect better from Arctic? Am I asking to much for a £5 M.2 cooler?

  • @Lurch-Bot

    @Lurch-Bot

    Ай бұрын

    Try the Thermalright one. It is miles better in terms of design practicality and I think they look nicer too. Won't cut you unless you are trying to cut yourself. You are not expecting too much; the Arctic one is an objectively bad design. But I knew Arctic had lost the plot when they discontinued their Accelero line to follow the ridiculous water cooling trend.

  • @lamikal2515

    @lamikal2515

    29 күн бұрын

    @@Lurch-Bot How much people want to de-shroud their GPUs vs how much people want affordable cooling solution wich destroy any competition at fixed noise output ? That one is easy to answer.

  • @jamesmiscellaneous

    @jamesmiscellaneous

    29 күн бұрын

    Nope you didn't ask too much. You were honest. I like Arctic and I know you do too. They need to and can do better.

  • @mikesunboxing

    @mikesunboxing

    29 күн бұрын

    @@jamesmiscellaneous thanks James, it is nice to hear a comment from someone as geniune as you to give me a reality check

  • @jamesmiscellaneous

    @jamesmiscellaneous

    29 күн бұрын

    @@mikesunboxing That's a big compliment coming from you, thanks Mike.

  • @VaracolacidVesci
    @VaracolacidVesciАй бұрын

    It is a bad design, but there is people whom should not be allowed to use any tool. Even a screwdriver can tell how bad is someone at using tools.

  • @ShinyHelmet
    @ShinyHelmetАй бұрын

    Damn, this takes me back to my PC building days when you'd randomly slice your fingers open on a case or motherboard I/O shield. The amount of blood that can come from a small slice in a finger is astonishing!

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    yeah it really is

  • @gasracing5000
    @gasracing5000Ай бұрын

    This press together design becomes a tomb for ssds. One you put a ssd in, getting it back out is... interesting.

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    yes it seems that way

  • @Lurch-Bot

    @Lurch-Bot

    Ай бұрын

    Meanwhile, Thermalright did it right, with a bracket and screws to properly sandwich the NVMe between two pads. You can also adjust for thickness and clamping pressure, all for around $8 US. Dropped my temps by 20-25C. Comes off easily for changing the pads or putting it on another drive.

  • @mikesunboxing

    @mikesunboxing

    27 күн бұрын

    @@Lurch-Bot Reviews are done - will be released soon 🙂

  • @Kahlimer0
    @Kahlimer0Ай бұрын

    I think they are thought for back of motherboard SSD or slot who are actually void of any cooler not meant to replace the original front one, so as long it gets close enough performance than the front cooler it fine by me.

  • @XENONEOMORPH1979
    @XENONEOMORPH1979Ай бұрын

    its only the main chip that will get warm the others are memory as normal for data , you can go to about 70c before they start slowing down , i do have one but it just the same temps as if i freely have one without the cover , depends on your fans inside the case i guess.

  • @AlleGutenNamenWarenWeg
    @AlleGutenNamenWarenWegАй бұрын

    Buy a be quiet MC1(2€ Cheaper as the Arctic) or be quiet MC1 Pro (3€ more then the Arctic but with Heatpipe)

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    i will take a look at those

  • @roythunderplump
    @roythunderplumpАй бұрын

    Hope Arctic take note of your review and all the feedback for a revision. Luckily there are plenty of M.2 heatsink coolers under 5 or 10 smackers.

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    i hope so.

  • @jaketruman6816
    @jaketruman681619 күн бұрын

    Save yourself the headache! I just bought this cooler for my drive and I installed it with ease with one trick. The problem is if you snap the heat sink halves together before centering it perfectly to allow for the drive to be installed, then you will have to take it apart which is very hard. The trick is to center the nvme drive on the bottom half of the cooler first and then test fit it into the motherboard. This way, you can easily center the drive in the bottom half. It took me about 5 minutes of nudging the drive around but i was eventually able to install the stand off screw which told me that everything was perfectly aligned. I took the drive out one more time and snapped the top half on and reinstalled the drive with ease. It looks great and I'm assuming my drive will be cooler now.

  • @OlettaLiano
    @OlettaLianoАй бұрын

    Hi Mike. I've worked with that exact cooler, and with a few other brands like Thermalright and didn't have that much of a problem. First thing is I noticed you were using the wrong tool to take it apart. You might want to buy a plastic pry tool set used for opening tablets and laptops. They make it easier on your fingers, and on the cooler. The tolerance is a bit too tight, thus they must be have the M.2 placed exactly or as you've seen they won't fit. Be careful and take care of those fingers.

  • @Norman_Peterson

    @Norman_Peterson

    Ай бұрын

    it's not just that. products must be smooth. In the CAD drawing specifications chamfers are made, these are created not only for aesthetics but also to not make the material sharp. Regardless of the object, it is cut because it is sharp. Items for sale have certain ISO specifications that avoid this.

  • @JohnDavidSullivan

    @JohnDavidSullivan

    Ай бұрын

    Like a spudger?

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    I tried a plastic pry tool, and it just bent out of shape straight away, the amount of pressure here is incredible, consider it like trying to pierce a coke can bit without the momentum and with the can contents being a lot more valuable and delicate. It really is a over engineered piece

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    Yeah any plastic tool will have zero effect on this, it was close to the screwdriver bending, plastic would have given up straight away with the force needed

  • @OlettaLiano

    @OlettaLiano

    Ай бұрын

    @@mikesunboxing Wow. That's insane. I hope that you didn't take my comment to mean I don't think you know what you're doing. I full well know that you do. If I thought that, I'd certainty say it out right. LOL. I was only going off of my personal experience with the product. The ones you have must have been over engineered, because they're not suppose to fit that tight. Believe it or not, I have one m.2 heat sink made by Corsair that is water-cooled and connects to a custom loop. Weird, I know. Enough of my ramblings. Take care.

  • @tlv8555
    @tlv8555Ай бұрын

    Its bizarre they wouldn't go for a basic screws in the side design like so many others do

  • @hughluttrell6350
    @hughluttrell6350Ай бұрын

    Do you know any way to increase cell phone signal,it works outside but lose signal when inside.

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    Some providers allow WiFi calling , check if it is an option in your network

  • @theun-personing5674
    @theun-personing5674Ай бұрын

    I tried to mount one very similar to this a few days back and it wouldn't sit down flush. even though i lined it up correctly it was scraping against the chip things on the board so i gave up and binned it. 😅

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    i know the feeling

  • @WilliamAndrewPhilipBodie
    @WilliamAndrewPhilipBodieАй бұрын

    So saving some money to pay more in blood and nerves 😲 Thank you very much for your sacrifice Mike 😀

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    you are welcome

  • @garyrichards6079
    @garyrichards6079Ай бұрын

    Looks like your getting what you paid for !! .... What was the customer reviews/score like on the Rainforest ?

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    Brand new out yesterday I think so no comments or reviews to go by

  • @tallpaul9475
    @tallpaul947524 күн бұрын

    Can you tell me if 'NVMe SSD' coolers like this are really necessary for something like a 980 Pro that has the default sticker on it, if it never gets above 70 Deg C. ??

  • @mikesunboxing

    @mikesunboxing

    23 күн бұрын

    70c is pretty warm, i like my drives to stay around the 50s if possible, but if it works and isn't thermal throttling carry on

  • @PapaMav

    @PapaMav

    15 күн бұрын

    ...and keep calm

  • @Vialli100.
    @Vialli100.Ай бұрын

    The built in one on my Crosshair viii Extreme keeps my Samsung 980 pro at 46c (26c in my front room).. My other two Samsung M.2 are in the Dimm.2 and are the same temps.. That is more trouble than it's worth.. That is rubbish..

  • @lamikal2515

    @lamikal2515

    29 күн бұрын

    I think those heatsinks are designed to be used on drives put on mobos wich does not have included heatsinks. Your Crosshair VIII Extreme is a 800 bucks mobo, so it better be having decent heatsinks for it's M.2 ports.

  • @adriannasyraf3534
    @adriannasyraf3534Ай бұрын

    use hairdryer/heat gun to expand the metal before taking it apart

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    good idea, but you r really shouldn't need to do that for a brand new product

  • @makiwa
    @makiwaАй бұрын

    I'm surprised you didn't try to fit it before you fit the top part of the cooler...??

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    well really all the others i have used in the past have probably been a bit smaller and not had the clearance issues, this is the first time i have had this much trouble

  • @makiwa

    @makiwa

    Ай бұрын

    @@mikesunboxing Sorry, I was meaning after you had adjusted it. I'm terrible for assuming people get what I mean. Fail on my part. 🫤

  • @bulldogboy100
    @bulldogboy100Ай бұрын

    You've just completely put me off buying an enclosure for the build I'm doing

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    i just ordered a few different models on Amazon, so look out for the reviews coming soon. Hopefully something good will be found

  • @notpoliticallycorrect1303
    @notpoliticallycorrect1303Ай бұрын

    If you apply a little heat to just one side of the cooler it will come apart much easier.

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    yeah that is a plan idea, but i should not need such drastic action on this cooler, it needs to be designed better.

  • @notpoliticallycorrect1303

    @notpoliticallycorrect1303

    Ай бұрын

    @@mikesunboxing I agree, a little chamfer or finishing of the edges would make no difference to the coolers performance or aesthetics.

  • @PapaMav
    @PapaMav15 күн бұрын

    Thank you for the warning Mike.

  • @mcdazz2011
    @mcdazz2011Ай бұрын

    I'll be avoiding. I've made plenty of blood and skin sacrifices since the 1990s, but this seems to be more of a torture device than an M.2 cooler.

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    Haha yeah not great 👍

  • @Senrab46
    @Senrab46Ай бұрын

    It appears to me they gone for style over practicality. Add they probly using a 3rd party manufacturer to hit price means quality control not good. Below par for Arctic stds. I would rather pay more ease of use and fitment. Thanks for the warning Mike and Kath 🐈👍

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    it is close to being really good. rounded edges, smaller length and looser tolerances and it would be great

  • @alonsogabriel9336
    @alonsogabriel9336Ай бұрын

    Hmmm. Nah I'll leave my hot ssd bare to the airflow of the case fans or just use the one that came with the motherboard. Also there are unknown brand ssd heatsinks with better compatibility and less hassle installation compared to this, and also wont wound you. 😂

  • @JohnDavidSullivan
    @JohnDavidSullivanАй бұрын

    I've made many a sacrifice in the past. No go backsies

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    Yeah this was a literally painful experience

  • @JohnDavidSullivan

    @JohnDavidSullivan

    Ай бұрын

    @@mikesunboxing thanks for your honest review, would expect nothing less

  • @ilovelimpfries
    @ilovelimpfriesАй бұрын

    If you want an SSD cooler that actually work, buy a Thermalright HR10 pro. It cost about £15 and the idle temp on my Kingston Fury Renegade is 27c and at full load never exceed 53c.

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    sounds good a few people have suggested that model, i will have to try it, thanks!

  • @bokami3445
    @bokami3445Ай бұрын

    18:39 --> ...if you've 5 or 10 quid, (or an extra pint of blood..) and you want to try it....

  • @hughluttrell6350
    @hughluttrell6350Ай бұрын

    You have more pataince than my with my back always killing me.I would have thrown it against the wall a few times and jumped up and down on it a few more just for good measure.

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    lol I was close and if it wasn’t for a video I would have given up much sooner

  • @Arachnoid_of_the_underverse
    @Arachnoid_of_the_underverseАй бұрын

    Thats a nasty cut Mike,it looks like you need to fumble around with the marigolds for these. Ive seen similar with fiddly small screws to hold the lid on but those look like design over function.

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    I think chain mail might be better or some Ironman stuff

  • @sorin5713
    @sorin5713Ай бұрын

    👍👍👍

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    Thumbs up? My thumbs are ruined 😂

  • @sorin5713

    @sorin5713

    Ай бұрын

    @@mikesunboxing 👍

  • @wiedapp
    @wiedappАй бұрын

    Hmmm, an unstoppable force (bench vise) and an unmovable object (heatsink). What could possibly go wrong? 😉

  • @mikesunboxing

    @mikesunboxing

    29 күн бұрын

    i won't be finding out :-)

  • @makiwa
    @makiwaАй бұрын

    Thoughts - "Rubbish"!

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    😂

  • @duikmans
    @duikmansАй бұрын

    Over-designed and over-engineered. Screws would indeed have done the trick.

  • @jamesdegriz
    @jamesdegrizАй бұрын

    Most of these coolers tend to be rubbish. Id also wonder if it had enough thermal mass for continuous heavy use.

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    to be fair to it, the performance was actually pretty good and on par with the PCIe gen5 cooler the motherboard has, and that is twice the size and weight, so that part of it is pretty good

  • @jamesdegriz

    @jamesdegriz

    Ай бұрын

    @@mikesunboxing Fair play. At least they havent put an LCD screen on it :D

  • @TinBin-Craig
    @TinBin-CraigАй бұрын

    no thanks.... cheers

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    don't blame you

  • @Dmwntkp99
    @Dmwntkp9915 күн бұрын

    Design is bad, I always buy the ones with screw or clip pressure mount.

  • @indrahaseo
    @indrahaseo29 күн бұрын

    be quiet mc1 pro is better and have screw on it than arctic M2 pro

  • @mikesunboxing

    @mikesunboxing

    28 күн бұрын

    almost anything will be better than this one

  • @cptwhite
    @cptwhiteАй бұрын

    Just bad product design all over - hard to remove to the point of causing injury, not particularly easy to assemble, and due to it's low surface area inefficient at removing heat...💩💩

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    it is a badly engineered unit, it could be great, but i falls short in the machining. Shame as the performance is actually pretty decent for it's size

  • @cptwhite

    @cptwhite

    Ай бұрын

    @@mikesunboxing I'm sure you appreciate the difference between the ability to absorb heat and the ability to radiate heat. For short bursts of activity from the NVME sure it will provide some help, but for sustained data transfers the heatsink will just be become saturated, and due to lack of surface area to radiate the heat away will just sit on top of the NVME as a hot metal bar. Better then nothing, but the benefits are limited as a result of the poor design choice.

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    Airflow is your friend for these smaller coolers

  • @Llun
    @LlunАй бұрын

    Pure trash... use the be quiet! MC1 Pro... a bit more expensive but a great SSD cooler with copper inside...

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    i will have a look at that one soon

  • @Norman_Peterson
    @Norman_PetersonАй бұрын

    Thank Mile.

  • @christopherbussiere4415
    @christopherbussiere441529 күн бұрын

    Read Manuel

  • @mikesunboxing

    @mikesunboxing

    29 күн бұрын

    manual doesn't state to wear protection during assembly only for disassembly, unless they changed it after the video was released

  • @uglybob7505

    @uglybob7505

    29 күн бұрын

    Manuel is from Barcelona

  • @mikesunboxing

    @mikesunboxing

    27 күн бұрын

    @@uglybob7505 Lol!

  • @Jacko_486
    @Jacko_486Ай бұрын

    A completley unnecessary item

  • @mikesunboxing

    @mikesunboxing

    Ай бұрын

    how so? it has been proven that bare drives overheat and lose performance and probably lifespan. A £5 investment in your data is worth it?

  • @Jacko_486

    @Jacko_486

    29 күн бұрын

    @@mikesunboxing I should correct my statement. It's probably unnecessary on on a motherboard that already has a heatsink! Maybe a PCIE5 NVME drive would require something with a bit more metal

  • @uglybob7505

    @uglybob7505

    29 күн бұрын

    @@Jacko_486 Cuts cheddar into slices really good