Another Graphics card not working after cleaning with an air duster
Тәжірибелік нұсқаулар және стиль
For repair, please contact me on discord / discord
Or email me at tony@northwestrepair.com (ignore automatic reply)
Also my thingiverse page www.thingiverse.com/tonycstec...
Resources and much more are available on Discord.
===================================================================================
#gaming #games #gameplay #gpu #repair #nvidia #amd #fix #fixed #
Пікірлер: 5 000
other technicians would have stopped on the first fix. Very rare to see such dedication nowadays. Nice work
@longjohn526
9 ай бұрын
Fuses seldom blow for no reason and just because you replace the fuse and it doesn't instantly blow doesn't mean everything is working properly.
@jerk_store
9 ай бұрын
More like, a *poor* technician would have stopped at the first fix. As longjohn526 already pointed out, a fuse doesn't blow for no reason.
@anonydun82fgoog35
9 ай бұрын
@@longjohn526 Yep, always look for the cause of the blown fuse, the fuse is the symptom not the problem.
@furkan9549
9 ай бұрын
Cause was the blowing fan created reverse voltage, isn't it?
@iHaveTheDocuments
9 ай бұрын
He literally needs to make content. It's bad business to just stop. Content is finite
90% of techs wouldn’t have found all those issues. Seriously incredible job.
@wwiiinplastic4712
9 ай бұрын
Best Buy would try to sell you a new GPU after telling you yours was too trashed to fix.
@delta0307
9 ай бұрын
99%
@dieSpinnt
9 ай бұрын
Yeah, he did a great job and explained very well what was going on in an entertaining way. I share your opinion (the last sentence). But why is your praise preceded by a wild claim for which you have no data (that absurd 90% random number)? Is that supposed to be some weird kind of reinforcing adjective? So I mean these unknown and probably fictitious other technicians and that you just generally prejudge these (unknown) people. Do you need such weird and disingenuous tricks to make an argument? Sorry, but that is weird behavior. Repair-Technician-Trauma or something? Also, reality doesn't work that way. How do you think northwestrepair improved his skills? Through training, feedback, practice and learning from mistakes. Your announcement just doesn't make any sense, because if a technician only delivers rubbish, then (to say it nice **g** ) he will eventually be able to look for a new job, or the company will be sued.
@mattlai443
9 ай бұрын
those 90% is not named techs
@KeenanCrow
9 ай бұрын
@@dieSpinnt bro this is a KZread comment section not a formal report for a repair technician association or something. Some hyperbole is to be expected. I’ve never had a technician do that much on a GPU before. So if you want an anecdotal number, he’s better than 100% of those I’ve experienced.
Honestly this type of repair knowledge and dedication is up there with Doctors and Teachers imo. Truly the backbone of a functioning society. I wish there was more of you
@jeremywilliamson1194
4 ай бұрын
How does repairing a graphics card help society function. It's the trades that make society function. Do you know what separates 3rd world countries from first world countries... running water, sewage and electricity
@jeremywilliamson1194
4 ай бұрын
It was super cool. Impressive skills too
@xJeffisi
4 ай бұрын
@@jeremywilliamson1194 I think he means electronics repair in general. I'm thinking about how the entire world is run on circuit boards, not all of which can be so easily replaced.
@DookyButter
4 ай бұрын
@@jeremywilliamson1194, when it comes to electronic engineering, how do you think modern water, sewage, and electricity runs efficiently?
@demaciasolos
4 ай бұрын
You doing tricks on it
I'm always amazed how people can do surface soldering of such small components. I make a mess just trying to do the simplest soldering on a PCB, but this is just art
@daveh7720
5 ай бұрын
I worked in electronics design for four decades and was a fair hand at soldering. What really impresses me is that he can salvage a chip from another card to replace one on the repair unit, and it worked.
@edwinbongas
5 ай бұрын
@@daveh7720 is it salvaged from another card?
@Thequotequotequoteq
5 ай бұрын
@@edwinbongasyeah he took it from a 1070 parts board
@ska042
5 ай бұрын
Not to say it's nothing, but it's easier than you would expect. Most of the time you just place the component so it sits about right on the pads, apply hot air, and it'll seat itself into the proper position on its own. I don't consider myself a soldering wizard by any means, but the soldering work required to do this wouldn't be the tough part to me. The really hard part that I have a lot of respect for is diagnosing the issues properly without a schematic or repair manual. That requires a lot of experience. I'd be able to solder the components, and get replacements from a donor board, but I wouldn't know what to do, or what's worth trying!
@notmenotme614
3 ай бұрын
I was about to say the same. When I’ve tried soldering on a breadboard before, the heat would start to remove adjacent components or burn the pads out. How does he not disturb the other components that are next to what he’s replacing?
This is how testing should be performed in all hardware stores. It's not enough just to fix the obvious issue, but to perform a stress test and identify all other problems before calling it a fix. Job well done! Congratulations!
@Akeldama9
8 ай бұрын
I agree! But on the flip side, the problem is that it likely increases the price of the service & also takes time for the tech to stop & make a phone call to the customer to inform them of what was found. If someone had a limited amount of money & was hoping for an easy quick fix, what are they supposed to do when to get their part back costs more than they have?
@pcgenerationstore
8 ай бұрын
@@Akeldama9Or when the service costs more than the item is worth
@thunderborn3231
8 ай бұрын
are we going to mention that he replaced the IC with one from an old ass 1070 unnecessarily and then when he found it wasn't the issue he kept it? no just me?
@tiacool7978
8 ай бұрын
I thought he replaced it a second time with something else, when the first change didn't help.
@krisshyvik8209
7 ай бұрын
@@Akeldama9I guess they have to face they cant afford fixing it then and have to wait🤷♂️
Just a side note: When using compressed air to clean a fan, don't let the fan spin up. It (may) act like a generator and push a high voltage into a controller. I've damaged equipment by not being careful enough.
@StanleyKubick1
9 ай бұрын
oh god. that's what I always do. I have an 8psi dry compressor and I just blast it into my case spinning every fan. maybe I shouldn't do that anymore, lol
@AnontheGOAT
9 ай бұрын
This is ancient knowledge that’s somehow been forgotten. Can’t believe folks don’t hold the fan while blowing air through.
@FieroGT3400
9 ай бұрын
perhaps im wrong here, but these are brushless fans, they wont generate squat if you spin them up...
@Ubeogesh
9 ай бұрын
So i can let them spin if I disconnect them?
@knockdoun
9 ай бұрын
@@StanleyKubick1 yea it basically acts as a generator when you do that
Just outstanding. The amount of explanation and showing details and as to why passes your knowledge onto others outstanding! Hope to watch more of your videos soon!
the dedication!! god bless you man, been a dream of mine to be a hardware engineer working/repairing at nvidia but guess i just wasn't cut out for it - watching these makes me feel a little bit of regret thinking i should've pursued hardware engineering a bit harder than i had, keep up the great work - loving watching you and louis rossmann do repairs in such a dedicated way
@Redcloudsrocks
4 ай бұрын
you can still start doing it
@Johnhazrd
2 ай бұрын
It is never too late brother, if you have a passion you can do anything. Just remember to be patient with yourself as nothing worth doing is ever easy or instantly attainable.
Don't forget this man not only did the repairs but also recorded and edited the video of the whole process! God bless you and your skills!
@northwestrepair
9 ай бұрын
Yes, thank you
@lifeisamatrix5960
9 ай бұрын
@@northwestrepairhow much to mess with a xts1500 Motorola radio? Believe it's a board issue but not knowledgeable enough to resolve. More and for giggles project of mine.
@EatMyShortsAU
5 ай бұрын
I can edit and record videos it seems pretty easy to do but can be a lot harder depending on the level of editing required. Meanwhile, fixing these graphics look 100 times harder. Like high school kids edit and record videos all the time, I don't know any who could fix a graphics card like this.
@inabstract
3 ай бұрын
And i also believe he has another day job! My question is... coffee drinker? 🤭
@cassanateli
14 күн бұрын
Lol yup that’s how informative videos work
I love seeing electronics repaired rather than going to recycling / landfill. There needs to be more accessible repair shops out there.
@HoodrichShinobi
8 ай бұрын
needs seriously dedicated people because it's so complicated, and newer tech changes so much in the course of only a few years. I wanted to do IT very badly but I am in a different profession now. Not because I gave up. Because it pays better.
@crp5591
8 ай бұрын
@@HoodrichShinobi Yeah.. that's the thing.. the amount of labor and expertise required to do these repairs is insane! And therefore very expensive. Likely it costs more to do these repairs than it does to just buy a new graphics card. It's a catch-22.
@asmongoldsmouth9839
8 ай бұрын
@@crp5591Absolutely true. In North America, anyways. In the Middle East, it's cheaper for labor than new parts.
@marcusjackman1487
8 ай бұрын
@@crp5591It's sad that it's so backwards
@blackterminal
7 ай бұрын
There would be if people were willing to pay.
I’d assume the damage was caused by letting the fans spin freely while blowing in the compressed air. This can damage components because of the back-EMF it causes. Just as power makes a fan spin, a fan spinning can create power and send it back where it would normally be coming from.
@ackillesbac
3 ай бұрын
I work in the industry, servicing quarter million dollar machines, and I also tell my clients to be extremely careful using air cans, we have seen them fry powersupplies. Plus they dont clean, they just move dust, you need to make sure you move the dust out of the machine, not just deeper into it.
@clownavenger0
3 ай бұрын
Yeah i always make sure to put a finger on fans so the don't spin too much when cleaning.
@wesporter2176
3 ай бұрын
@@clownavenger0 That's probably a good idea I never heard of this potentially causing problems but I can say I've cleaned my PCs since the 80's with canned air and never had a single issue.
@gravityomega9607
3 ай бұрын
@@ackillesbac yeah, I think people buys these cleaners because they dont want to open the GPU and blow the air with dust into the graphic card lol
@drescherjm
3 ай бұрын
I must have been lucky in the past when I used an air compressor to blow out my PCs.
I have learned from good advice when using AIR to clean Pc Components with FANS, i always tape down the fans to stop them spinning, Soldering, use the right temp for the job, and photo every part of dissasembly, and support heavy GPU's. Im a total novice, yet have learned the hard way. Interesting and informative content. Kudos
@dreadfulbadger
Ай бұрын
I've always just jammed my fingers in the fan to stop it spinning lol. Taping it might be better
@davewills6121
Ай бұрын
@@dreadfulbadger Whatever works in my book
@hellhound320
21 күн бұрын
Compressed air can also have condensation and in some cases it might shoot some of the water out, so be careful with that too.
@mick7727
21 күн бұрын
@@hellhound320 The trick is to remove products from power before cleaning them - don't hold a can upside down, don't shake it, don't leave it going for too long at one time.
This is how my family thinks I look like when I’m telling them I build PCs. 😂😂
@aether8412
Ай бұрын
I just let them think that way 😂
@user-wq9mw2xz3j
Ай бұрын
"putting together (parts)" is a more accurate term😊
@makuru_dd3662
Ай бұрын
I thought you throw rocks at each other till a computer forms.
@hooptastic_hippie8522
Ай бұрын
@@makuru_dd3662 thats how i have always done it too
@notNajimi
Ай бұрын
@@makuru_dd3662they had to do that to make software before the first compiler was written, nowadays we just get our computers to smash rocks for us programmatically
Very impressive repair , wish there were more repair shops around with your skills and dedication.
@billfred9411
5 ай бұрын
I don't think what he does here will ever be common. It just is'int very practical and i get the feeling if it was common they would charge a lot for it. Like for a card like this you would probably be paying half the price of the card just to fix it.
@zetsubou3704
5 ай бұрын
@@billfred9411That doesn't make sense, if such repairs were common, they would be cheap, not the other way around.
@billfred9411
5 ай бұрын
@@zetsubou3704 It was a hypothetical my dude. I already stated its impractical so by nature it means you won't find many people willing to do it which would make it more expensive. I just meant if it was a thing it would not be cheap because all the work it requires. Also there are many things that are common and not cheap as an example a shipping freighter or airplanes.
@monpoky
5 ай бұрын
@zetsubou3704 you have to pay the man for all the hours of work, it would be cheaper, but probably the price drop would stop at a expensive number and then if you want it cheaper you would have to aquire the services of illegitimate people. Compare it to getting veneers for example.
@littlegoobie
3 ай бұрын
That's why all tv repair shops are gone. I remember my friends relative growing up had a tv repair shop and it was busy. I even have fuzzy memories of the tv repair guy coming to my place to fix the family tv, pulling out modular boards, etc. These days, your tv is worth 1/3 the price you paid after 2 years, the new models are probably better, and everything is built into 1 or 2 pieces. they're not serviceable without complete diagnostics of individual components. meanwhile, a new 50" tv is $300.
great job with the work. Im impressed with how thorough you are. The video filming and editing is top notch. you are great at repair, but amazing at content editing with choices to narration, speed and cuts.
Definitely thorough in post repair troubleshooting, saving the cards and owners future expenses created by initial issue. Sure wish more repair Techs had your ethics and work principles.
@northwestrepair
4 ай бұрын
Thanks.
@marcinm2767
4 ай бұрын
@@northwestrepair the thermal paste on gpu chip. Fuck men learn how properly put this on. Only idiot put X on processor.
Very rare and critical skill set. So many gpus get thrown away once they breakdown and you repaired it like new.
@BobRooney290
9 ай бұрын
why would someone get it repaired with you can buy new for the same price?
@cosmic_gate476
9 ай бұрын
@@BobRooney290whoever can afford to care about sustainability
@RNDM-nd7tj
9 ай бұрын
@@BobRooney290 How much does he charge for a fix like this?
@JaySilva88
9 ай бұрын
@@BobRooney290 Doubt he charges 1000€ for a fix like this, but ok.
@brayan6852
9 ай бұрын
@@JaySilva88a 2080 in 2023 will not cost a thousand euros though.
Seeing a true professional doing work like this is therapeutic. Incredible work Tony!
I wish everyone in repair shops works as much like this guy, a real quality work, Salute to you sir
Much Respect for doing what you do. I have tried (and failed) several times to repair PCB components and I just plain suck at it.
Im a Bench Jeweler and i work with soldering tiny things into place. i have so much respect for electronic technicians, i find myself bitching when i cant get a stone to seat right on prongs. Then i watch videos like these on my break and i can only imagine the headaches you guys have to go through for checking the quality of your repairs.... you do what you think needs to be done, just to hook it up and run benchmarks for something to still be off, and then start over again. MUCH RESPECT AWESOME VIDEO!
@ska042
5 ай бұрын
The hard part is the diagnosis. The soldering in this case is something anyone with a bit of experience handling SMD parts, a hot air station and a soldering iron can do. The diagnosis is almost black magic compared to that, especially if you don't have actual schematics or repair manuals from the manufacturer, that requires a lot of experience and a good electronics knowledge base.
@AleksiOsuisse
4 ай бұрын
@@ska042True, as a apprentice I couldn’t imagine doing anything on a board I don’t know the schematics off.
@tamikuru7936
4 ай бұрын
The PCB is made to repel solder. Just put on the right amount, have enough solder flux heat it up and everything flows into place. The diagnosis though... oh lord please save us 😂
This is a great showing of why repairs like this one are expensive, without the tools, the expertise, the fine motor skills to manually deal with SMDs and the tools (Like an expensive oscilloscope) It's impossible to fix modern GPUs. Even with all that it still takes both time and effort carefully dismantling and reassembling the card to do testing and diagnostics. Excellent job!
@Yukeena
9 ай бұрын
How much does a repair like this usually cost? I'm only asking because if its so expensive, I think it would make more sense just to spend an extra $100-200 (depending on how much the repair would cost) and just get a new card.
@NoeticSystem
9 ай бұрын
The truth is, even to fix a GPU made in the 90s, you'd still need a multimeter, oscilloscope, and dexterous fingers. That part hasn't really changed, much. The part that has changed is the sheer number of teeny tiny booger-sized SMDs on these newer, gigantic cards.
@alexisrivera200xable
9 ай бұрын
@Yukeena I dont repair GPUs but been doing electronics repair as a side hobby for a couple years. I'd wager that unless the GPU is worth more than $700 US dollars or finding a suitable replacement is not feasible Repairs like this don't make sense. For a sub $500 Card you easily exceed 50% of the value of the GPU brand new. (my personal threshold for recommending just buying a new one.) My reasoning is that even with a great quality repair like this one, there is no telling how the other components service life got affected by the faulty component before the fix so you end up with a card that can last you from years to a couple months at worst and these repairs are done after warranty is gone so the value proposition is not good for cheaper cards. Sadly this is part of the planned obsolescence baked into moder products and why the expertise keeps becoming more rare as time goes on.
@jhoughjr1
9 ай бұрын
yeah im an EE by education and a programer by trade. The vast majority of things it just doesnt make sense to pay someone to fix. Even an easy fix may take 2 hours to diagnose and affect. Thats gonna need to be at least 50 bucks for the time adn that is for a relatively simple issue. Like I have these wiz light bulbs I got on clearance for 9 dollars for 3. 2 are dead after 30 days. I suspect an electrolytic cap in the PSU went bad. Getting the boards out without destroying them would be a job. All to fix a 3 dollar light builb. Or I could just go buy another box in ten minutes. I do want to rip the ESP32s out of them if possible, but havent found a nondestructive way to get the board out.
@jhoughjr1
9 ай бұрын
@@alexisrivera200xable this has zero to do with planned obsolescence
Board-level repair is awesome. Good going!
I know so little about circuit boards. It is great of you to spread some knowledge like this.
This was incredible! To have someone who takes apart cards and gives them new life is remarkable
@solomoncumquats776
9 ай бұрын
Anime
@schpeidermann
9 ай бұрын
This is the way! Seriously. Wonderful job!
@joechristo2
9 ай бұрын
@@solomoncumquats776This can have so many meanings and I love every single one of them
I don't have any expertise in GPU repair, but seeing him in action makes me curious to learn more about GPU repairs. You are awesome!
@northwestrepair
8 ай бұрын
Cool, thanks!
@sfey8924
6 ай бұрын
@@northwestrepair Ditto! Do builds myself; but being able to dig deeper would be nice to add to my sodering skill. but that heat camera seemed like a eipc help, may I ask what that is? & hopefully things continue :)
@gianthairypanda
5 ай бұрын
Its just a thermal camera addon for your phone. The camera is cool and helps to isolate potential issues but I suspect it will take time and experience for you to actually tell the difference between something that is supposed to warm up vs something that is abnormally warming up too quickly. I suspect if you want to do this yourself, you would need to measure the normal operating temperature of all your components (perhaps using the app or an infra thermometer) as your rig is powering up, left running for a few minutes or longer so you have a set of baselines to compare against.
@TomCruz54321
5 ай бұрын
This is the most educational computer video I have ever seen. I thought I was pretty well-versed in PC building but I never knew most of these stuff.
@nojuanatall3281
4 ай бұрын
I've read that gpus shouldn't get over 80 degrees Celsius.
Wow! Impressive how you find and fix all the problems! Thanks for the video!
I've never seen your videos before, and I want to say, thank you for posting this. Great information to review!
Man you like a detective and a medium at the same time - this type of gut feeling shows up after years in industry. Rezpect.
It's awesome to watch a pro at work. It's also impressive that you treat the customer's card as if it were your own. No cutting corners, or rushing to "just get it done".
@Temulon
8 ай бұрын
Well, to be honest, he isn't going to do a rush job and cut corners on a card he's using in a video that showcases his dedication right?
@Bollibompa
8 ай бұрын
Hahaha so dumb
@joel3683
7 ай бұрын
@@TemulonTrue but the point is that he didn't, and he should be commended for doing an amazing job that Ik a lot of people wouldn't have a clue how to do and at the end of the day, that means the gpu won't end up as waste for now but let's hope it stays that way for as long as it can
@R03333
6 ай бұрын
@@Temulonyep, if this were an actual card repair business it wouldn't really work. The charge out would have to be high enough to cover all the time & most people are just going to put that money towards a new card, just the reality of the world
You scared the heck out of me at 6:37 because I was in full screen lmao FANTASTIC repair, wonderful troubleshooting skills
so rare to see the old-style youtube content that isnt just bs clickbait and 10min of ramble. great video
It is nice to see someone go the extra mile. Like alot of other comments say other repair persons may have stopped when it was "technically" working again. You went above and beyond. Keep up the good work.
I worked as an electronics technician for over 15 years... computers, music and stereo equipment, etc. I hated doing SMT parts. Excellent job!
@sw6188
9 ай бұрын
I've been an electronics tech like you since the late 70s and even today I hate doing SMD. I can understand why manufacturers use them - because machines can place them on circuit boards - but they're not made for human hands to deal with!
@yorkshireplumbing
9 ай бұрын
@@sw6188 that's probably another reason why they like them, don't want people repairing their own stuff now! Companies crow about the environment publicly, but it's all for show, they don't mind filling the planet with e-waste one tiny little bit.
@sw6188
9 ай бұрын
@@eye776 Yes I understand all of that, like I say I have been in electronics since the 70s so I have seen the transition from big bulky power-hungry units to things that will fit in your pocket and run for days on one charge. The point I was making above is that SMD technology was really not made with human hands in mind.
@KRAFTWERK2K6
9 ай бұрын
@@sw6188 That's the point. They don't want human hands to repair their tech so they place THESE little shits all over the electronics that require microscopic precision of a robot and the same amount of microscopic fine aimed soldering heat.
@krashd
9 ай бұрын
@@KRAFTWERK2K6 Did you even bother to read eye776's comment? A 3-foot long graphics card would not fit inside any case...
I never knew such a repair was even possible, this is amazing. Fun video, thanks for sharing.
Wow! Absolutely impressive repair and excellent job describing the issues to us in laymen terms. If all refurbished cards are maintained with such care, then I would definitely have no problem owning one.
One of the biggest issues with air dusting is that not many people realize if you spin the fans even if the card isn't plugged it, it can cause a short due to the turbines ramping up speed leading to a discharge of electricity. Mostly harmless but not worth damaging your parts. A big tip for air dusting) Either take the fan off the card itself or place your finger or something else in the way of the fan blades to stop them from spinning, if you do take apart the fan record yourself doing so, so it's easier to place back together and you may as well get used to using a soft bristle brush with 90% proof rubbing alcohol. Taking the pre-cautions won't lead to as many issues.
@Zellonous
9 ай бұрын
I don't know about on a graphics card but on case fans you can blow them out with a leaf blower and nothing bad happens.
@necgromancer
9 ай бұрын
lmao wow, whenever i clean stuff with fans i try to spin them up as high as possible.... oops 🥲🥲
@Brian01987
9 ай бұрын
Dont listen to that guy. He thinks the fans on a GPU have the same function as a alternator.
@riddell26
9 ай бұрын
Myth
@peterhindes56
9 ай бұрын
@@riddell26no it's true, but most good designs have flyback diodes
you made it easy to understand for someone who knows a lot about computers but not a lot about hardware repair. fabulous work!
That was a cool repair to watch! Impressive seeing the technique of soldering parts in and out, didn't think that was possible with hand tools I learned never use a air duster.. I cant afford a new card
I've never seen the inside of a GPU, im not in this line of work. Was super interesting to see the process and intricate detail you put into fixing this card, not just fixing it but to ensure it worked as it was designed. New sub for sure.
people who can repair graphics cards are magicians to me, good job, mate!
@kingofdice66
9 ай бұрын
How about guys that design them?
@vidurachamathka2317
9 ай бұрын
@@kingofdice66A doctor can perform many miracles that god cannot..
@HeroicDose
9 ай бұрын
@vidurachamathka2317 you mixed God and doctor up pretty sad
@vidurachamathka2317
9 ай бұрын
@@HeroicDose I'm yet to see god's so called miracles, but I've seen plenty of normal humans preform them right in front of my own eyes. Doctors, Engineers, scientists and many more if you're struggling to think of examples..
@HeroicDose
9 ай бұрын
@@vidurachamathka2317 colorblind people can't see red, I guess I should believe them that it doesn't exist lol
As much as I loved EVGA, their fan controller idea was utterly brain dead.
@rjs1138
9 ай бұрын
yeah, this was an interesting watch...i have an EVGA 1080Ti with one fan running slow...so i'm gonna investigate the "tuning" settings now.
@BlackJobZ
9 ай бұрын
Why? You could noctua fan mod it easily that way.
@onlyeyeno
9 ай бұрын
@@BlackJobZ Are You asking "rjs1138" why he would investigate if his problem is due to an erroneous SOFTWARE-Setting, and instead suggesting a "hardware-mod" ?? If so, why, if not what are You replying to? Best regards.
@BlackJobZ
9 ай бұрын
@@onlyeyeno sorry am replying to the original comment.
@sergioh2015
9 ай бұрын
@onlyeyeno he never tagged the dude you're talking about. If you have to assume who somebody is talking about don't bud in... trust me I've learned that way too. Lol
Just found your channel, your work is very impressive to see and I'm loving your content
@northwestrepair
5 ай бұрын
Thanks 👍
Sir, your follow through, is commendable. Good attention to detail, and plenty thorough.
Love the amount of detail in all the diagnostic processes, making sure every aspect works perfectly before sending them back!
what a tricky one, kind of scary the low resistance after changing that one chip but good thing you keep checking the resistances so thoroughly
Today learned that someone so dedicated in the repair field exists. Awesome work with the card. Goes to show that so many cards and parts that users deem unfixable are indeed fixable. Most repairmen these days would give up on the first try. You made my day. Keep the good work up!
I learned nothing. I only became more confident that it is extremely hard to find the real professional like you. Subscribed and pressed like to watch more videos from you. You are showing a beautiful magic.
This was recommended at random to me, but it is fascinating and I cannot overstate how impressed I am with your level of knowledge with this technology, and your attention to detail. It’s so cool to see! Kudos.
To think someone can pinpoint these issues with such accuracy and fix em up like it's nothing baffles me. Amazing work!
Most impressive are the soldering skills. I mean the diagnostics are outstanding also. Well done.
Only a master at their craft would be able to do this. Thanks for showing us your ways!
This man really takes pride in his work. We dont see enough of that these days. Bravo sir.
This is like watching a cardiac surgeon do a bypass on the heart. So much delicate, time taking and intricate work thoroughly done! Deserves a subscribe and like for the neat explanation as well.
@JesseFuches
8 ай бұрын
“I’ll be switching out this man’s defective valve with a one that I dissected from a donor pig. I don’t know if it will work, but there’s only one way find out!”
still coming back to this and rewatching, its so cathartic
I love the IR sensor. It's a lot higher detail than the ones that were available 5-7 years ago when I got mine. Had a quick peek and still very costly though.
Its the fans free spinning when you blow Canned air through the heat sink, Because an electric motor turns into an alternator generating current so when you blow air through the card it free spins the fan generating current back through the circuit, Most Case fans actually have protection However the problem with EVGAs(amung others) design is that it blows the fuse and can damage other parts of the circuit, because there is no overcurrent protection(typically older case fans could blow Fan headers this way). so I always tell people with Graphics cards when cleaning jam(or press on them slightly) the fans so they don't free spin, I had a 280 EVGA Classified die on me in this way which was fine the card really needed to be water cooled anyways.
@kimberly4275
9 ай бұрын
Wasn't this myth busted by Linus and the power dude
@nocturnal101ravenous6
9 ай бұрын
@@kimberly4275 Uhm What, That is not a myth, Lol. its a fact go spin an LED fan..........
@kimberly4275
9 ай бұрын
@@nocturnal101ravenous6 The myth is that it generates enough current to damage your pc. Not that it can generate any
@nocturnal101ravenous6
9 ай бұрын
@@kimberly4275 3 fans spinning faster than originally intended......If its fast enough to light LEDs in larger case fans WTF do you think, Also I accidentally killed a Dust Buster style EVGA 285 Classified card cleaning it in this way, and I have seen dead fan ports on Motherboards over the years it always is an issue of I cleaned my computer now my fan doesn't work. It depends on overcurrent protection of the circuit. It is not a Myth, either link the video or stop spreading bad information. Also I am 99% sure Gamers Nexus, Jay2Cents and Linus say don't blow and freely spin fans as they have killed ports. Also here is a dead card with a blown fuse after the person states I cleaned it with Compressed air. So what more do you honestly need? there is no myth to it. Also you can reverse the current.
@kimberly4275
9 ай бұрын
@@nocturnal101ravenous6 Idk what to tell you. Look at their testing with electroboom.
this is the only guy i would trust with my electronics.. very thorough and attention to detail
love to see people doing things right and not half fast. very impressive.
your knowledge of the schematics of such parts is rather incredible :o congratulations on this repair
This was fun for me to watch - I trained as an electronics technologist som 50 years back, and get a kick out the changes in circuit board assembly. You sur do know what you are doing and very nice video.
This is really amazing. I used to work on big machines (cargo airplanes) which involved a lot of brute strength in a lot of places. I love seeing the same dedication only in the micro-scale.
You are a Master at your Craft I got goose bumps watching you work.
That was some seriously amazing work... wow...! definitely keeping your info on hand...!
I pretty much never leave comments, but its people like you that are just absolute gods to me and deserve the best. Your knowlegde about graphics cards is insane to me and thanks for the work you do
Great job sir! I think most repairman would stop digging for issues the moment that they successfully launched the card and passed the stress tests. You go the extra mile! If I ever need repair I know where to look for it. Thank you!
@nikso1496
9 ай бұрын
We can thank the lacking of additional education of technicians who get taught how to replace parts but nothing about fixing the parts itselves for that
@thenightingale7405
8 ай бұрын
Lol, I can tell you that at my previous job when I killed a computer with compressed air, I put than one in the closet and dragged out a new one for the employee.
@yeahnvmnvm1331
8 ай бұрын
@@nikso1496 repairing the parts are impossible and useless.
@higueraft571
7 ай бұрын
@@yeahnvmnvm1331Like this one?
AMAZING WORK THIS IS SO GOOD love it thanks for doing what you do!
Awesome work. Really appreciate the dumbed down step by step.
It's worth noting that air dusters can spray water as well as air so always allow time for it to evaporate before powering back up, ideally use a hairdryer on a low heat to dry it.
@jamesgoodman540
9 ай бұрын
False. They contain neither air nor water. It’s just compressed refrigerant, if you tilt them to far (on most models) you release liquid refrigerant. The liquid refrigerant will quickly flash off components without any residue. Some brands like to put nasty bitter powder in their duster cans, avoid those.
@kilroy987
9 ай бұрын
I was wondering why the card would stop working after being air dusted.
@WellyngtonDev
9 ай бұрын
@@kilroy987 two options: the air press was to high and damaged the components, or gpu was already damaged before the cleaning proccess
@altvamp
9 ай бұрын
@@kilroy987 I think the video is pointing out that the air duster on the fans causes them to rotate and hence feed power back into the circuit which could damage the electronics of the fan and that could in turn damage the video card, but I was just pointing out another possible cause for video card failure after using an air duster could be water on the circuitry.
@altvamp
9 ай бұрын
@@jamesgoodman540 I think you're getting confused with freeze spray, the can I have says compressed gas it doesn't say what gas but it's most likely some inert gas and pressurised, but whatever it is it cause freezing on the surface it's sprayed on so you could say it is a refrigerant, again either way freezing produces water from the air, how much and how quickly it dries depends on how much you spray and where it goes, if it gets inside or under components and it's not dry it could be a risk.
This is brilliant work, which i didn't think existed anymore. I wish there was someone with your skills where i live. Great video, thanks!
Idk why but something about reviving electronic toys brings so much joy
Very interesting. Master class on repairs! If any of my GPUs go down this is where to send it!
Amazing repair. Intuitive diagnostic based on experience and knowledge. I wish I had that expertise to repair my own stuff. Nice work!
Your Work is GOLD! Thank you for doing that and for sharing it with us!
Legendary fix. Absolutely awesome. Loved the video!
That was awesome man! Loved it. Brings back memories.
The level of dedication and experience this guy has. Love it.
As with any aerosol can, whatever comes out is cooled down significantly and allows condensation to appear on the cold area. So even if there's no water in the can, there's water in the air around you condensing on whatever it colder than the rest of the room. As with anything electronic it's best to use low power electric air dusters, or carefully brush off dust manually. Make sure to always use grounding measures as brushing and or dusting in general will cause static electricity.
@WellyngtonDev
9 ай бұрын
very well said. And what do you think about the air compresser machines?
@LanceThumping
9 ай бұрын
Not entirely true. If you are spraying without tilting the can or anything than the gas coming out is by definition the part that has taken heat in and warmed up. The bulk liquid in the tank is what gets cold.
@Jadebones
9 ай бұрын
@@WellyngtonDev Actual air compressors, or electronic dusters? As long as you're using an oil-less air compressor, you're sure you have purged the tank & air lines of any liquids....there shouldn't be any issues. Your first couple of times using an air compressor to clean your PC, start at the lowest air pressure possible for your machine, and begin dusting from a good distance away so as to not cause potential damage. Then just experiment with distances and pressures until you find the safest and most effective levels you're confident with. Also.... Be sure to secure any fans from being able to move while cleaning. That way you don't cause them spin-related damage nor unnecessary wear & tear from cleaning, that could have gone towards keeping your system cool...
@mrbuttocks6772
9 ай бұрын
That or do it in a room with an active dehumidifier.
@NeverSuspects
9 ай бұрын
It's probably spinning up the fans generating some voltage more then the cold from the can that caused the damage.
This is the level of technical expertise i could only dream of. Literally trained to be a surgeon and vascular surgery seems easier than this😅 Amazing work and dedication. More people like you would do a lot towards moving away from ewaste 🙏🏾
This video got super technical, you sir have earned a new Subscriber! 👏
I really REALLY dig this content. The musical montages when you're repairing and cleaning electronics is hypnotizing. I could watch just that alone all day long. I wish I knew how to get into this sort of thing; it's very interesting to me. Thank you so much for creating this content and sharing your humor, expertise, and knowledge with us all. Keep it up - I know it's not easy to put together videos on top of trying to keep your day to day routines intact. We appreciate it!
@jetjazz05
9 ай бұрын
We all need to pitch in and help him get a Fluke, he would get so much more joy from the solid and instant readings they give. I'm not shilling for them, I've just used a dozen or more multimeters in the last 15 years and the truth is a Fluke really helps you not second guess yourself because of wavering readings. "The right tool for the job" as it were, helps keep the passion of your work alive.
@aviandragon1390
9 ай бұрын
If the guy wants a fluke multimeter he can buy one himself. They aren't that expensive, and he doesn't seem to be impaired by using whatever he's got. If you're so desperate to give your money away I'm sure there are plenty of local charities you can donate to.
Have to say, I am not easily impressed, but the level and attention to detail you give your repairs is unparralelled! Really good work. A+
@april7_DDG
9 ай бұрын
Agreed! And then you may get impressed really differently like watching one whole clip of Williams mobile clutch replacement!
@wpgspecb
9 ай бұрын
You dont watch enough youtube then.
@kudoistas5133
9 ай бұрын
He cracked your ass, now you're impressed
this is SO neat to watch. thanks for the vid!
You said you hope you learned something today. I learned that I'm probably not going to be lucky and find a tech as skilled and dedicated as you locally lol amazing work!
Impressed. Have suffered thru J std 9 times, over 21 years as E tech building OCXOs alone for a very expensive product, repaired multiple units. At the point you started replacing gull wings I would've just said screw it and bought another gpu. Granted you can't buy a decent 2080 anymore, still. Salute. You are the tech I should have been.
You are my absolute hero. I understand electronics and I can solder. But how in the world would I even start growing my apprentice-level skills to slowly work my way to hardware wizard. I have so much respect for you; thank you for your inspiration.
@wakingfromslumber9555
9 ай бұрын
Understand basic electronics then the component functions on the gpu at a high level I guess?
That was satisfying af!! thanks for this video!
That was really neat. Thanks for making the video, I found it very interesting.
Dang man, legitimate technical skills here. Well done! Love seeing tech saved from a landfill and back into the hands of an owner for years of use. 2080 still a beast.
Very cool to see the elimination process, and rigorous testing, love it! Earned a sub!
Always a wonder to watch you work. You da man, no one does it better!
Obviously a job of passion for you! Extremely interesting to watch.
I think what you do, and the skill with which you diagnose these issues is amazing. I got a second hand NVIDIA GeForce GTX 750 TI given to me from my nephew earlier this year. It was full of dust, the fans, the bents and the heatsink under the 'window'. before putting it in my PC I had to clean it so I took off all the covers and used a USB air blower to get rid of as much as I could and then I used a natural hair 1" paint brush to get rid of the harder crap between all the fins and vents, and cotton buds with IPA to clean off the gunky stuff from the fan blades. I was never stupid enough to remove the heatsink though, and I had an earthed wire bracelet so it worked beautifully once put back together and installed.
@res1492
9 ай бұрын
"I was never stupid enough to remove the heatsink though" Strange comment...if you're going to the trouble of cleaning an old card then it's stupid to not take the heatsink off and add new paste.
To say that you are "practically speaking, a wizard" is an understatement. It is refreshing to see that someone knows what they are doing in this regard!
Fantastic job. Great video thank you.
You're goofy enough that I had to continue watching, amazing work, got my sub!
Awesome work! So much detail with into this job, feels like the labor and replacement parts would cost more than the card itself.
Where did a million views came from, anybody knows ?
@russellpurcell8207
9 ай бұрын
Showed up on my home page. Good video.
@RuiRex
9 ай бұрын
Showed up on my suggestions after an LTT video. But I'm sub'ed... 😁 Great videos!
@Aldranis
9 ай бұрын
This showed up on my recommended videos after watching a JayzTwoCents video. Looks like you won todays KZread algorithm!
@westonjennings7036
9 ай бұрын
This was really interesting, you must have been blessed from the algorithm
@cryptkeeper
9 ай бұрын
Just randomly showed up on my youtube front page
Just something about video's like this with this kinda skill and knowledge i find so soothing and appreciate that work that goes into it. Good job my friend.
Wow awesome work! Great work to narrow down the solution! Subscribed! Keep up the great work! Content like this is what I am here for!