To anyone watching this and thinking about getting spacers.. BUY A TORQUE WRENCH SO YOU CAN TORQUE THE LUGS TO SPEC. You don't need locktite as long as you torque the lugs to spec. The horror stories you read about online with bolt on spacers coming off is of people that don't torque them to spec.

@leolin3620

2 жыл бұрын

Yep, I was literally cringing when he didn’t torque the lugs 😭

@PointBlank65

Жыл бұрын

@@leolin3620 The other thing with the locktight, That is NOT locktight that is copper based Anti-Seize.

@nolanbremseth2499

Жыл бұрын

Coming from a guy who has worked at a tire shop for a few years now I can not agree more, the little rachet wrench does nothing when the car has a torque spec of 150 ft lbs. Otherwise great job getting hub centric spacers.

@Diddy_Doodat

Жыл бұрын

Nah, just get hubcentric spacers.

@lesliecruz9985

10 ай бұрын

if u watch any video for spacers u will be surprised how many ppl do this without proper torque and this short cheap wrenches

The black wing looks great! Don’t forget to take the wrap off the other door handle 😂

Damn the car looks great! Lovin your progression in the build to make it your own. Keep up the great work !

The car is lookin great! We have very similar taste...less is more!👍 your videos are some of the best out there..

Man that car is gorgeous!! Even looks good with the stock wheels.👌🏽

Your ride looks great! I'm considering the same springs as my Mustang is my daily! The Pro kit is the smart buy for a street car!

The Pro lowering kit was a good choice and I had Sportsline done on my Accord and was the BIGGEST mistake and never again! I did buy the Pro kit for my 16 GT but had to send it back to AM as my GF's driveway lip was already too high for the stock height so it wasn't worth having to worry about scraping and damaging the front lip.

Now you really gotta do the euro taillights bro, would add to the murder look you have going on with the 5oh

Car looks really good with the wrap and the lowering springs I may consider the same springs for my 19 Mustang also👍

That’s great definitely put those spacers on ! I’ll do on mine too it will look way better .. yours look way cooler cheap way to make it Look meaner

Looks fantastic! Question though have you had any issues with the tires rubbing since they stick out further?

Yo Rush the stang lookin Beautiful oh and for the calipers I think like a Neon Purple just a suggestion but it will match incredibly well with interior purple lighting👌🏼

The spacers and the springs are just right. Super clean.

Mustang looking real good bro keep up the good work ✊🏾

Hey Rush, nice mod. I like the new look of the mustang. The new look from the wrap and the wheels make the car look more mean.

Need to black out the GT badge on the back. Needs to be done. The car is look really great!

Congrats on 50k!!!! 🥳

Having someone in the car applying the brakes would be so much better when properly torquing the spacer lugs. You can even wedge a 2x4 between the seat and brake pedal to hold down the pedal.

im going to order the 1inch spacers for all four corners, did you have any issue after lowering the car in the front, any rubbing? i have a performance pack as well with stock wheels, not sure if yours on this vid are the stock ones, eventually i will buy some lowering springs but will probably buy the ford performance ones(the magnaride compatible ones)

So with Eibach Pro-Kit lowering springs and 1 inch spacers do you have any issues? I'm looking into doing that when I get my Mustang Ecoboost next year. Would it still work for a 19 or 20 inch rim?

Hey Rush, just purchased a 2020 mustang gt after long time watching your videos and I was wondering if you know any shop in OC where I can get a Eibach prokit and spacers installed. Been doing some research myself but was wondering if you know any trustworthy services around the area. Thanks !

Your car looks amazing. Nice upgrade 👍🏻👍🏻

I just got new wheels and decided I wanted a widebody kit after the fact and I need 2” spacers on all 4 wheels. Would that be safe to run if they’re high quality ? I’m really not trying to pay 3-4k+ for another set of wheels and tires

I run the sportlines with spacers also on my 2016 mustang gt. I was scared to do it at first. i was worried about scraping also. I was super surprised that I currently have zero issues with scraping or bumps. and it looks and feels amazing.

@darkskinz0617

4 жыл бұрын

Right boutta get mines on Wednesday I live in pa where it’s a lot of going up and downhill but ion care 😭 the bottom plastic anyways🤣

The new look is outstanding...more wider stance and aggressive. Do you love the handling of the SRT better than the GT or vise-versa?

Looks great!! Keep doin' you, what makes you happy!! 👍

just curious I want to buy a lowering spring and this Mod does it look good on just stock 17" wheels?

You should wrap the gt emblem on your deck lid and horse I think it would look way better

Gloss black the front pony on grill! Would set it off nicely! Looks great though!

How much space more did you get from the wheels spokes to the brembo caliper?.. I bought brembos that I can’t install because my wheels (20x10 45 offset) did not clear the calipers. :( I have 14 5.50

I have the spacers already but i want to go with the sport line will it rub if i go that low ? Now that i seen you video i think ama go pro kit asswell my drive way is Steep

I like the videos where you install the mods yourself!!!!

How do you stop the fish tailing? Also, what percentage are your tints? Nice car and video man!

Bro did you get like the last pair or something online cuz they are sold out until november lol, or did you find them at like a shop?

Im assuming your car did not come with magneride? I heard the 2020 GT PP1 on magneride, the bolts up front are a bit longer than the back.

You didn’t have any rubbing issues during bumps or turns??

Change those lugnuts out for some black ones. .I done that and 1 inch spacers all around. Made a huge difference

One of the cleanest 5ohs out there! Great job man, love it. 🔥🔥🔥

Is that also a 1 inch spacer for the back wheels?

After 9 months of ownership of a 2018 Mustang Ecoboost I today, upgraded to a lightly used 2018 Mustang GT 🙏 I am insanely happy and in love! Nothing can describe the smile on my face when I hear the V8 Roar!

@TheSneakerJury

4 жыл бұрын

Also anyone know the best tires for my rears? I’m running 295s btw!

@ramonmartinez381

4 жыл бұрын

TheSneakerJury 305s are super popular and perfect stance I heard you can run 315s but that’s overkill imo and easier on your wallet

@TheSneakerJury

4 жыл бұрын

Ramon Martinez any good tires? I would run nittos but since they are so soft I don’t wanna kill my pockets lol I was thinking some Michelin’s? Something I can use on a daily drive but also be cool when I wanna have fun

@ErikHerrera18

4 жыл бұрын

TheSneakerJury Michelin sport cup 2s! They grip on those are insane. I love them

@zach891

4 жыл бұрын

TheSneakerJury I would get with 305 in the rear those are really popular & for the tire I would go with the Michelin pilot sport 4s really good street tire, don’t go with the cup 2s those are track tires

What size are the spacers you put in the rear wheels?

Do you have the same spacers on all four sides?

Is your 5.0 equipped with Magnaride?

Lovely car, looks great, thanks for the video.

Will it fit a 2016 mustang gt the front wheel spacers ?

What lowering springs did you install?

what did u do for the rear fitment ?

Why does Amazon say these spacers wont fit my 2019 Mustan gt

what size spacers are in the rear wheels?

Oh wow. That does make a difference!

What mm is the spacer u have in the front

Looks like the old lugs are too long for that spacer?

Yeah, but in my case, I have to see what size? spacer because my rims are 18x9.5, and stock rims are 19x8.5.... yours look very nice stance with your spacers, I'm hoping that, my car gets delivered in 2 weeks so I can test all the parts I purchase....

Do you have magniride cause I read that if so you can't use spacers

You ever going to go with a Air Lift suspension?

What kind of rims do you have? Rims & Tire Size

Do you have 1 inch spacers all around?

Can you do high speed turns and some pulls ? Wi

You should get the euro taillights Rush!

Hey Rush, love the channel man 🤙. How are you liking the front wheel spacers? Any problems? Thanks man

@thelona108

3 жыл бұрын

Problem with wheel spacers is, you dont know there a problem until the front wheel pops off your car doing 60 down the highway.

@UR_AL_SHOOK_UP_21

3 жыл бұрын

@@thelona108 hahaha exactly..also he ended up taking them off ...he went cheap so im assuming some one told him not to go cheap

Finally a self install and not dropping it off at a shop

@zach891

4 жыл бұрын

Every mod he has he installed himself besides the lower springs lol you should watch his videos before saying shit

what's that spoiler called bro?? looks sick

What size are your tires?

Spacers make the OEM wheels look much better. I put 25mm on the front and 20mm Eibach on the rear with my PP wheels and IMO they look perfect. I did add the splash guards from CJ Pony parts to hopefully keep rocks from hitting the sides. It has been 3 yrs and they are still working out great. Oh, and I did use some antisieze on the spacer to hub contact spots just to be sure it doesn't stick. The car looks amazing, Rush!

@colton8143

Жыл бұрын

Is your car lowered? I’m thinking of doing this but I’m not sure if it would rub or not

@trbstang

Жыл бұрын

@@colton8143 no, it's not, but it would probably be ok if it isn't lowered too much. If you are already lowered, I'd say buy one set of spacers and try them out on both the front and rear to see how they work.

@vicrefalo3273

5 ай бұрын

Hey man, I'm considering putting a set of spacers on my 18 pony, have you had ANY issues with your wheel bearings? I've heard that spacers add more pressure to them. Your feedback will be appreciated. 👍

@trbstang

5 ай бұрын

@@vicrefalo3273 no, no issues with them and I'm at 68k miles. I have some clunks in the suspension when I hit bumps, but I know one of the front control arms is worn and I suspect the sway bar links might be too. But those should not have any relation to using spacers. I plan on looking at the suspension in depth next month when I have some time off.

@vicrefalo3273

4 ай бұрын

@@trbstang Thank you for getting back to me with your update. The CLUNKS are a bit of a concern to me, to be on the safe side I would jack up each wheel and check for any movement or play by rocking the wheel, if you have ANY movement it's indication of a bad bearing. If not you're GOOD to go. I'd be interested to get your feedback. Have a GREAT DAY. 👍

you should only put around 90fp of torque onto the lugs of the spacers

The spacers do make it look much better.

I bought mine 2 years ago when I bought my 2018 but have yet to put them on because I’m kind of nervous about it. Also it was said that the spacers weren’t made for the front. I bought all four anyway and would like to finally put them on. What’s the psi for the lugs set at?

@acclol1939

4 жыл бұрын

6ixSpeedStang18 spacers are fine as long as they’re hubcentric like the ones rush got. Just be sure to install them properly and you should no problems

Car looks so good now!

The mustang has a bad ass look bro what wheel spacer do you have on the rear planing to do the same

@moyrod1

4 жыл бұрын

Did you had to do a alinement to the car for those wheel spacers and lowering springs and are those the same wheel spacer for both sides ?

Was this 1” on all corners?

I understand why you did it, I just can’t justify altering something mechanical for ascetics

Very good quality man, keep it going :thumbs_up:

Looks very nice, spoiler looks better too!

Are these 1in spacers?

Does your car have Magneride?

Where are the livestreams at?

What rims are these ?

What exhaust?

Great video. Thanks

i like the pro kit the perfect stance

Just copped some Eibach springs last night, mind linking me to your guy? I'm looking for good prices located in OC

@edward3922

4 жыл бұрын

GTStung Albert -5 %

@LeJunny

4 жыл бұрын

@@edward3922 what do you? Lol

I also love the wrap.

That dash looks sooooo fucking sick

That looked more like anti-seize than locktite?

Would these fit on my EcoBoost 2019? 🔥

That wrap is dank.

Are they Safe ..?

Looks Awesome!

First thing I did was spacers!

Wrap is Awesome!!😁

How much did that Steeda clutch assist spring help u. I cannot get used to this clutch feel.

@kevinskonieczny7708

4 жыл бұрын

I had one on my 15 GT. It was a great aid for the odd feeling pedal take up on these cars.

@SteveHatzman

4 жыл бұрын

Kevin Skonieczny cool. Thanks man.

I hope you did an alignment after the lowering springs install! Coilovers would've been a better option, lowering springs makes the ride rougher.

@TitanUnleashed7

3 жыл бұрын

True but there’s probably atleast a 1000 dollar difference between those two options

@ck2853

2 жыл бұрын

Anything that makes the handling better usually makes the comfortability get worse. Stiffening suspension makes u feel everything in your back/seat, but makes the car corner and hook up better. U can throw some fortune autos on that are insanely expensive and if you have the car in a low mode then your only paying for being able to adjust the height when its parked or cruising, but you are still gonna feel the bumps a bunch. If you want performance then you gotta sacrifice comfort and smoothness. But if you get a progressive style spring you wont have as much instant handling but you will have a much smoother ride then linear springs

@OEMPlus

9 ай бұрын

you don't know what you're talking about.

You think these would fit on a 18 premium pp1 ecoboost?

@trunkslorenzana

4 жыл бұрын

Yes they will, but I advise staying away from wheel spacers if your going to be doing pulls and racing,unless its just for show

I’m apparently the only one who noticed that my man DIDN’T USE A F**KIN TORQUE WRENCH. The ‘18-‘19 pony with PPL1 has a torque spec of 150 ft./lbs. on the wheels alone(I know this cause I own a ‘19).....and I think the spacers are supposed to be torqued to 80 ft./lbs. ..... this dude used a ratchet to tighten errthang down and kept sticking his thumb in the air saying “good to go”.....NNOOOOOT!!! Also, I’ve seen some comments on here giving kudos for this car being “murdered out” .... this car (while beautiful) is not murdered out...... grey wrap and chrome accents disqualifies it from that category. My “Mistress Chloe” is 99% murdered out sporting only minor red accents......however she is gloss black and not flat black as per the definition, but still a vision of loveliness!😍

@intencitie

4 жыл бұрын

Thats the first thing that came to my mind thats why I gave his ass a thumbs down.

Much much better I will do this to mine too 🎉

GREAT VIDEO. YOU ANSWERED MY QUESTION ON SPACER THICKNESS. THE TRUTH IS , YOU COULD NOT HAVE SELECTED A BETTER COLOR OF WRAP . BEAUTIFUL AND DIFFERENT. GREAT JOB ON YOUR MOD’S AND GREAT JOB ON YOUR VIDEO’S. GOD BLESS😎🙏🇺🇸

So, Front and Rear spacers are the same size?? Same model?? I read that is not recomendable put spacers in the front

@zach891

4 жыл бұрын

He has 1inch on the front & back, you can put 20mm spacers on the front & have no problems anything bigger is not recommended

@zikem1006

4 жыл бұрын

Thanks Zach.

I installed the 25mm spacers from cj ponyparts all around and the fitment is perfect. It's hard to show in a video but it makes it pop

@zach891

4 жыл бұрын

Any problems ?

@CanadianCruisin

4 жыл бұрын

@@zach891 I haven't been to the dragstrip yet but with everyday driving and a pull here and there the car feels the same. The hub centric ones fit pretty tight so I don't think they have issues like the old school ones

@mene1111111

4 жыл бұрын

@@zach891 Installed front/rear 25mm ZY wheel adapters on my 2019 Mustang GT PP1 a couple of weeks ago and shortly after noticed the front passengers' side wheel adapter was cracked in 4 of the 5 OEM lug stud holes. As the Coyote brand, the ZY wheel adapters purchased from Amazon list similar specs (6061-T6 Billet Aluminum and hub centric). My OEM studs are 36mm and stick beyond the spacer around 10.5mm. The indentation between stud holes on the PP1 OEM Rims is 10mm, so when pulling the wheel out noticed that OEM studs had left a mark approximately 0.5mm deep. ZY has send replacements (good customer service) and recently I have replaced the cracked wheel adapter. I have filed the end of the OEM stud approximately 1mm. I have also lowered the torque on adapters/wheels from 120/150 ft-lb to 110/140 ft-lb respectively, since the aluminum adapter nut casing would require less torque. I'll keep inspecting these wheel adapters for a while. I'm surprised that Rush have not noticed this fitment issue with his similar configuration 2019 Mustang GT w/PP1.

I'm not saying they are, but the way you explained it makes the spacers seem like they may be knock-offs. $40 cheaper on Amazon, no Coyote print, and on the box there's simply a sticker for branding.

Will wheel spacers help with fishtailing? I just got a lund tune on pzeros and the rear wants to swing out a ton.