3:38 fantastic transition. More of this. Well done

Nice! Awesome video as always!

@cjponyparts

4 жыл бұрын

JesseAndMike thanks guys! How is Playlistlive?

Good clear and useful information. Well done, thanks!

@cjponyparts

2 жыл бұрын

Glad it was helpful!

I enjoy your editing and how you added extra b-roll into the video + the new intro and outro screens/animations! Great video!

@cjponyparts

4 жыл бұрын

Austin Shuey thank you for noticing! The video team put a lot of effort into the changes

Awesome video! This really helped with looking for good spacers.

Most people think of the old spacers that rattled around. I got the 25mm hub centric for my 2019 gt from you guys and it looks awesome and have no issues at all.

@CRBN27

3 жыл бұрын

I see you everywhere I swear 😂

@CanadianCruisin

3 жыл бұрын

@@CRBN27 I just made a few clones that live on here while I sleep 😂

@CRBN27

3 жыл бұрын

@@CanadianCruisin 😂😂😂😂

@SootheCustoms

2 жыл бұрын

Still have these spacers on? I installed 1inch (25mm) on my 2019 and also no problems. I don't do any crazy track or racing

@CanadianCruisin

2 жыл бұрын

@SootheCustoms I still have them on yes. Just got a new set of summer wheels so they will be coming off but I've never had any issues

I bought the 1 inch up front 1.5 for back from y’all installed myself 2006 mustang gt I love it have no problems so far

Awesome video! Thanks!

I would love to know if a 23mm spacer would work on a mustang performance pack without cutting studs. I don't like the poke on the rear with 25mm. I know 2mm isn't much but everything helps. Thank you.

2005 mustang gt I'm trying to clear brembos on the front I need roughly 45mm offset My wheels are voxx PP replicas at 35mm. For 10 mm of offset, should I get a lug centric or hubcentic?

Excellent.

Gonna use these for my 5 lug conversion 90 lx! Save thousands

possible to get hub centric spacers made with the back side fitting a 2010 toyota venza (60.1mm hub and studs 5 x 114.3) and then the outter side having a center bore of (71.5mm and stud spacing of 5 x 5.127mm).

Was going to do a 1-inch spacer on my new ranger would that be bad for the wheel bearings if I got a hub-centric replacing the wheel bearings in these trucks are $1,000 and I do not want to put myself in that situation

Have a part number on those extended lugs you mentioned?

Do you have a set of spacers for 2004 ls430 15mm front and 25mm rear? How much?

Good afternoon, question, at the beginning you said that the spacers, like a mustang, are safe. But in the end I heard the opposite information ... Question: Will the spacers on the mustang be safe, for example, if you drive 140-160 miles per hour on the Autobahn? Or did you mean about the safety about the new long bolts on the car from the video? Thank you.

@ACommenterOnYouTube

Жыл бұрын

They only reply when you give them a praise on their video so don't wait for an answer

Can I put a 1/4" wheel spacer over a 1 inch wheel adapter?

Do you all sell an adapter to change my 71 c10 5×5/5x127 to a 5x4.5/114.3?

Are spacers safe at 160 mph?

Can I use spacers on a 2016 GMC Arcadia

Will the factory stud bolts stick out and interfere with the wheels..

@cuzz63

2 жыл бұрын

The nuts will be recessed, if the studs protrude out you can cut the extra off or get shorter studs.

Can a longer stud be used along with the bolt on spacer?

@dunaweezel

8 ай бұрын

That's what I'm gonna do. I'm still gonna get some good 6160 spacers but pop out the studs and use quality extended studs, dfuser makes some for miata

5mm spacer doesn't requires extended studs?

I had to buy a set of spacers for my Kubota tractor in order to put tire chains on.

4:39 I use those but I knock out the studs in them and use 3" studs through the hub. Why have 10 nuts instead of 5?

@littlewelder98

Жыл бұрын

You’ve done a great job at weakening your wheel studs all the shearing force is now out towards the end of the stud, and not in close to the hub. You are the reason this video was made.

@mcqueenfanman

Жыл бұрын

I don’t think so. The adapter fits tight on the hub and the wheel fits tight on the adapter. There’s a lot of surface area to keep the properly tightened studs from shearing.

Keep putting these on your cars, y'all are making me a ton of money replacing wheel bearings 😁

@jimbojimson

3 жыл бұрын

A set of properly made 0.5" hub centric wheel spacers on a 5.5" backspacing wheel would have absolutely no different effect than a 5.0" backspacing wheel with no spacer. Improperly installed spacers, spacers that are poorly machined, or spacers that don't center can all cause accelerated bearing wear. None of that applies to a properly made spacer like the ones used by countless Pro Stock cars that trap above 200 mph.

@lecoureurdesbois86

3 жыл бұрын

@@jimbojimson Problem also are the cast aluminium and loose (as he showed in the video) spacers, disgusging, often not even flush, and since they're cast they're not perfect, and softer

@twizzy8783

Жыл бұрын

20mm spacers are no different than running wheels with a more aggressive offset.

Made all the difference on my bullitt. Check my ig @street_carver to see Steeda 1” up front 20mm rear

i just want wide tires for traction

@robertelmo7736

4 жыл бұрын

I put a set of 315/40/17 555R's on the back of my Foxbody...those things are coming off and I'm going to a smaller, stickier tire. Bigger is not always better...lesson learned.

@predalienftw

4 жыл бұрын

@@robertelmo7736 with 700 horsepower i kinda need traction lol

@robertelmo7736

4 жыл бұрын

Ahh yes...you are going to need a 15" wheel with a big fat Mickey Thompson and lots of sidewall.

@christopherfoxwallace1291

4 жыл бұрын

@@predalienftw wide tires spin more in the rain. Pro race cars use a different tire size and composition depending on road conditions. In Lamans they choose 10 different sets per car.

@predalienftw

4 жыл бұрын

@@christopherfoxwallace1291 am i a pro race car driver

Never catch me with them

The only problems I have ever heard was over wheel bearings. I have a 3/4 set on my 2015 Mustang and havent had a problem in 3 years

@bmecalgary

4 жыл бұрын

Did you need longer studs?

@Knards

4 жыл бұрын

@@bmecalgary Nope. Used the product exactly as it came. 3/4" spacers. The spacers came with studs on them

@BHennessy1765

4 жыл бұрын

MrMrwilson11 do you check the lugs every so often or just leave em as is?

@Knards

4 жыл бұрын

@@BHennessy1765 I used to check them but never had to tighten them.