The Lightest Drawer System You Can Buy
Автокөліктер мен көлік құралдары
It's actually 43 lbs
See the drawer systems here: bit.ly/3EY5vIz
See the Jeep build here: revereoverland.com/pages/jeep
In this video I show you what makes the custom fitted overland Ultralite drawer systems from SHW Off Road so light.
Affiliate links where appropriate
Пікірлер: 124
I'm rocking a set of expedition drawers in my LX470, and they are 100% LEGIT. Super well built and incredibly functional. An absolute game changer for long trips!
@RevereOverland
Жыл бұрын
That’s awesome! I agree on them being a game changer. I was all about using totes before, but drawers make life so much easier.
SHW Offroad installed a system in my 5th Gen 4Runner and loving it so far. I went with a smaller Dometic cooler slide and there is plenty of room for sleeping on the passenger side. Great value and solid product engineering!
“This is more expensive than me.” 😂 This man is a treasure and we must protect him at ALL costs. On a serious note, this is a badass drawer system and looks really good!
@RevereOverland
Жыл бұрын
Lol!
Awesome drawers - simplicity is key when seriously off-roading
People never pay enough attention to what their mods weigh
@shaweehillsworkshop4226
Жыл бұрын
This is sadly too true!
@RevereOverland
Жыл бұрын
Guilty. Lol.
Very, very nice drawer system. Wes is an impressive craftsman.
@RevereOverland
Жыл бұрын
He definitely is!
Good system weight is killer for over landing . Merry Christmas for you and your family.
@RevereOverland
Жыл бұрын
Merry Christmas!
I built a similar design myself without runners, they simply slide on a smooth cabinet surface, they slide effortlessly with no issue and no loss of space due to runners. I simply used latched to keep them in place when shut.
🎵🎵Well, I've never been to Spain, but I kind of like the plywood🎵🎵 looking forward to picking up my set for the 2022 Tundra TRD PRO on 1/6/23.
@shaweehillsworkshop4226
Жыл бұрын
See you the John. Your Tall system will be ready and waiting
Been a subscriber before you even hit 1000 subs and to this day I still absolutely love your vids! But I always come back to the one question I've been wanting to ask. What on earth do you do for a living?
Super excited to get mine
@RevereOverland
Жыл бұрын
Awesome! Did you just order, or was yours one of the ones they’re making in the video?
@senrusho
Жыл бұрын
@@RevereOverland I’m Sam, the guy with the 4xE
@RevereOverland
Жыл бұрын
Oh, right!
Well Done!
@RevereOverland
Жыл бұрын
This is what we were filming when you were there! It was good to see you again - it has been a while!
Hi there! With the height of the drawer system and how it covers your subwoofer, does that negatively impact the sound of your audio?
This is very cool.
I love AMERICAN MADE products! Especially ones I know I can trust! SHW for the WIN!
@shaweehillsworkshop4226
Жыл бұрын
Thanks!
@RevereOverland
Жыл бұрын
Right here in Kentucky!
Thank you for showing these. How tall are the drawers?
They need to add an email list to their site because I'm not ready to buy a system today, but I want to remember them in the future.
Lol I heard imported wood from Spain, and out of my budget 😂. This was really cool to see and get ideas from. The drawer slide comment is 100%. I downgraded from 250 lb ones as it was too dang heavy and overkill. This looks really well made, and a great product. Does it have a bed platform attached?
@shaweehillsworkshop4226
Жыл бұрын
There is an option for sleeping platforms
Do they come assembled? How does it mount into the vehicle? Particularly 5th generation 4runner.
@RevereOverland
Жыл бұрын
They do come assembled. You'd have to call them and ask about the mounting in the 4Runner, since every vehicle is different!
Rob, Can you close the door with those in place if you have a tailgate table? Thanks and Happy Holidays
@RevereOverland
Жыл бұрын
Yes! I have a quick clip in the video showing it.
@camplerland1578
Жыл бұрын
@@RevereOverland thanks Rob
for anyone thats interested, its almost $1,500. close to the price. close to the price of my hard top add on lol. and it doesnt even have slides!!!!!!! people... cutting out the plywood does not save you much weight at all. just do this yourself with wood glue. Literally a single mom without any tools could buy some tools and do this. It wont look great but it would do the EXACT same job.
@RevereOverland
Ай бұрын
Of course you can make it cheaper yourself… when you’re paying someone else to make something, it’s going to cost more. You’re also paying for it to be shipped to your door in that price. That being said, you won’t make it fit this well (with the sides it has?) without an $8,000 scanner and some serious CAD programming. You also won’t get close to this light without importing the same plywood, which has a minimum order of thousands of dollars, and a CNC (which cost $40,000) or a lot of time routing. Also don’t just use wood glue. That’s just asking for it to fall apart.
What type of Coating on Drawer is that.
@RevereOverland
Жыл бұрын
Polyurea (aka bed liner)
To get that light, is there a durability issue? Drop/fall… can it support heavy weight on top?
@shaweehillsworkshop4226
Жыл бұрын
no durability issues. You can stack more weight on top than the vehicle can hold. All the weight is removed from non structural locations
@RevereOverland
Жыл бұрын
I should have stood on the top of it!
@shaweehillsworkshop4226
Жыл бұрын
@@RevereOverland I don’t know, you’ve put on some pounds here lately
@RevereOverland
Жыл бұрын
I’ve seen you stand on one, so I know I’m good 😉
@andyackerman7123
Жыл бұрын
Rob put on baby weight 😂
Is this plywood lighter than aluminum?
@RevereOverland
Жыл бұрын
I’m not certain, but it’s probably similar for a comparable strength aluminum.
It says free shipping and we know that can't be cheap. Would the price go down if one were to drive there and pick it up? I'm only few hours away.
@RevereOverland
Жыл бұрын
Give them a call!
@MrWinger1951
Жыл бұрын
Eventually I would like to do the same, as I live in northeastern Tennessee, and by driving up to Kentucky I could be assured of a 'no problem' install.
@shaweehillsworkshop4226
Жыл бұрын
Yes, we give a discount and install it if you come see us, just call or email us.
In for when this style becomes available on the half drawer for the gladiator
@RevereOverland
Жыл бұрын
It would work great as long as you have a sealed bed! The fiberglass composite one they have now is still light and is waterproof, but you definitely pay a premium for the material.
@newlifeoverland226
Жыл бұрын
@@RevereOverland oh definitely I just don’t want drawer slides due to having the exposed bed and getting grit in them. No matter how good the seal is eventually the slides will fail. When they come out with the uhmv in that one I’d be all in.
@RevereOverland
Жыл бұрын
I actually haven’t had any issues with mine yet, despite the crazy Oregon dust. I’m sure I’ll have to regrease them eventually though!
@shaweehillsworkshop4226
Жыл бұрын
@@RevereOverland you mean you're sure that I'll have to regrease them. We know you aren't doing any labor.
Is it lighter than a Goose Gear side by side drawer?
@RevereOverland
Жыл бұрын
I can’t find any details on the Goose Gear weight!
@shaweehillsworkshop4226
Жыл бұрын
It’s much lighter than the goosegear. I haven’t weighed a goose gear but have lifted one. The drawer slides add quiet a bit
@donmontalvo1
Жыл бұрын
@@shaweehillsworkshop4226 for sure! I like lightweight things. GVWR matters. :)
Do they make a drawer System for a 2 Dr Bronco?
@RevereOverland
Жыл бұрын
Not yet - they’re looking for one to scan!
@brian_hamlett14
Жыл бұрын
@@RevereOverland They can Scan mine if they want! I’ll be out that way today
@RevereOverland
Жыл бұрын
Give them a call!
@shaweehillsworkshop4226
Жыл бұрын
@@brian_hamlett14 give us a call, we would love for you to come by the shop!
If i knew this i would if never purchased goose gear. :(
@RevereOverland
Жыл бұрын
I’m sure Goose Gear’s drawer system is great too. Do you know how much it weighs?
Are you ever going to take off the silly dealer sticker by the taillight?
@RevereOverland
Жыл бұрын
No. My wife might, since it’s her Jeep, but I doubt she cares enough.
Couldn't one pretty easily replicate this with some plywood and truck-bed spray? $1,000+ seems awful steep for a couple of drawers.
@RevereOverland
Жыл бұрын
You could 100% replicate this yourself with a $12k scanner, $3k CAD software, $600 spray gun, and a $30k CNC machine! Seriously though: anyone is capable of building a DIY drawer system for less, but people always underestimate the cost of materials and time taken. When we built my 4Runner one, the roll on was $150 (quality spray is closer to $250), the plywood is $180 a sheet, and it took a very long time. You'd also need a sheet of UHMW, which is hundreds of dollars, or you could use the drawer slides that were around $80 a pair for mine. It also won’t be nearly as light, but if that’s not your priority then go for it!
@RevereOverland
Жыл бұрын
Actually, you could use a router to get the weight down. You still can’t get the plywood though!
Nothing for the 2nd Gen Crosstrek 😢
@RevereOverland
Жыл бұрын
Will any of these work? shwoffroad.com/product/custom-size-ultralite-series-drawer-system-for-any-suv/
@brandtdaniels
Жыл бұрын
@@RevereOverland I’ve seen other companies offer universal SUV drawer systems but then you usually have to build your own gear platform to make sure the lip is level with the floor. Too be honest though if I’m paying that much I expect it to be made specifically for my vehicle.
@RevereOverland
Жыл бұрын
You should have them scan yours!
My Gladiator would have been $2800 lol
@RevereOverland
Жыл бұрын
Yeah the fiberglass composite and extra long 500 lbs drawer slides are way more expensive than the simple Ultralite systems! It’s what I have in my Tundra though - it’s twice the price of Decked, but has twice the storage space while also being lighter!
1300$ what in the hell
JLU - $1350 -$1400 . . . 5th Gen 4 Runner - $2000 -$2400??? I understand value is subjective to each consumer, but I can't help but feel these prices are ludicrous.
@shaweehillsworkshop4226
Жыл бұрын
I'm not sure you looked at the website correct. Our ultralight drawer systems start at $899
@shaweehillsworkshop4226
Жыл бұрын
We actually pride ourselves on being made in America right here in the state of Kentucky but being able to compete with the chinese made brands price wise. It's not easy.
@RevereOverland
Жыл бұрын
Like Wes said, they start at $899 shipped. If you have the skills, you can save a little by building it yourself. If not, you could use totes from Walmart. It won’t be as good or easy to use, but it’ll be a lot cheaper.
@_Akicita_
Жыл бұрын
@@shaweehillsworkshop4226 - I believe I did see it correctly for what was shown by Rob. . . I saw your ultralight drawer system is unfinished in raw wood, with no sleep platform and no OEM subwoofer is $900.00, but that's not what was reviewed or shown. I'm not disputing your prices. . . I am only providing a subjective opinion that I think the value to quality ratio is not what I or many would consider pragmatic.
@_Akicita_
Жыл бұрын
@@shaweehillsworkshop4226 I respect that but could counter that there are also many U.S.A craftsmen that would be willing to produce one-offs of equal quality for less. I wish you the best of luck and prosperity in your business endeavors.
Hi Kelvin
@RevereOverland
Жыл бұрын
I don’t know anyone called Kelvin
@Magicgeorgelee
Жыл бұрын
@@RevereOverland I mean the power station - "Crafuel".
@Magicgeorgelee
Жыл бұрын
Hi?
@RevereOverland
Жыл бұрын
@@Magicgeorgelee hi? My name isn't Kelvin.
@Magicgeorgelee
Жыл бұрын
Are you the content creator of Revere Overland?
$1429 for a 4th gen 4runner.
@RevereOverland
Жыл бұрын
$899 for a 4th gen 4Runner
3k😂😂😂😂. Paper template and a jig saw.
@RevereOverland
8 ай бұрын
The one in the video is $1,299 currently. Building it is still cheaper, but you’re going to spend a small fortune on the plywood if you want the same lightness.
$3000 for Drawers.. Scratch Head... NO Thanks
@RevereOverland
Жыл бұрын
They’re $899?
I too built my own drawer system rather than going with a Decked or something similar. By building it myself I got the dimensions I wanted and needed. @hott_tacoma
@RevereOverland
Жыл бұрын
Nice! It looks great and obviously fits perfectly with your cooler!
@Hott_tacoma
Жыл бұрын
@@RevereOverland Thanks 😊 It’ll eventually be a fridge for longer trips but for now I have to go with what I can afford. It was rock sliders or a fridge. I think I made the right decision.
@RevereOverland
Жыл бұрын
I think so too. A cooler is perfectly functional.
@shaweehillsworkshop4226
Жыл бұрын
That looks really good, and I bet you have more storage space in your half drawer than a complete decked system has as they waste so much space. That was the reason we developed a half drawer system. I am a big proponent of DIY, but we are there for the people who aren't able to.
@Hott_tacoma
Жыл бұрын
@@shaweehillsworkshop4226 Thanks a lot! Behind the fridge slide, well cooler slide, is another storage compartment for things like tools, bottle jack, things I don’t need everyday. The tray slide is the best part because I’m short so reaching in the sides is more difficult. It’s easier to bring everything to me so I don’t have to keep climbing or send the kids in after things 😂