You guys skipped the most important test. The “original tool box test”, this is where you put all the tools in the box and then rattle the box around as if it were in a truck toolbox riding down one of the bumpiest dirt roads in Southern Alabama and then you lay the toolbox in the “ready to open, ready to work” position and open the box. If more than 3 sockets or tools have come out of its plastic holding then you immediately take/send the toolbox set back to where the hell it came from cuz even if the tools are great, if you gotta clean up sockets for 10 minutes and replace everything every time you open the stupid box then it’s worthless.

@marcuszettergren8885

2 жыл бұрын

Start by securing the box inside the car and you might save a bit of time.

@Horseshoecrabwarrior

2 жыл бұрын

@@marcuszettergren8885 Eh, that's a decent point, but sometimes the entire vehicle is the thing shaking, not just the box, so it's still a factor.

@samholdsworth420

2 жыл бұрын

@@marcuszettergren8885 some of those crappy tool cases will reorganize your sockets if you fart near them

@jakebrake5776

2 жыл бұрын

Facts 🤣

@UltraGamma25

2 жыл бұрын

Yes

I have never bought this sort of tool "brand" because I don't trust them. Thanks for doing the tests that show that I've been making the right call! Channels like yours prove that the Internet can be used for Good.

@YTDumpsterBaby

Жыл бұрын

One thing to consider is manufacturer guarantee tho. Its a pain in the ass sending things back to the manufacturer when the retailer has washed their hands of the replacement guarantee. Amazon would basically make it much easier to get replacements

@Wpjgdmtu

Жыл бұрын

@@YTDumpsterBaby if you go to hf and spend about the same you get a better built tool set that has a lifetime guarantee. Much easier to walk into a store and trade in a tool than having to mail things back and forth. Same thing with most major box store tool sets. Which companies have stopped their lifetime guarantee?

@BrianOrEric

Жыл бұрын

@@Wpjgdmtu hf = harbor freight?

@unitedgtaron5056

Жыл бұрын

@@BrianOrEric yes they have really good lifetime warranty but i think its limited to one per year if im not mistaken

@jed-henrywitkowski6470

Жыл бұрын

While I have and do buy cheap, screwdrivers and some other tools for occasional around the house or light work, I would not and do not buy "comprehensive sets". Another good place for cheap screwdrivers is loaner tools.

Amazon continues its trend of finding a company willing to give it a cut of sales on an existing product in return for the Amazon’s Choice sticker. Was looking at shredders, recently, and found literally the same shredder as an Amazon Basics one, but it was $10 cheaper.

@mediocreman2

2 жыл бұрын

And good luck filtering through all of the sponsored junk to find the good stuff.

@Senkino5o

2 жыл бұрын

I really despise the way they do that. You look up anything on Amazon and you have to wade through hordes of expensive re-sellers only to discover the actual manufacturer either isn't on Amazon or like I said, buried. But all the re-sellers have 50,000,000 5 star reviews so I guess I'm wrong.

@wolphin732

2 жыл бұрын

@@mediocreman2 good luck trying to filter out junk when you want to just look on their site at all!

@fltchr4449

2 жыл бұрын

After noticing that the Amazon search engine isn't really a search engine I would figure out what I want independent of it and then check if they had it. Now I skip the going back to see if Amazon has it part. I turn to them when I can't find something elsewhere.

@yzmoto80

2 жыл бұрын

I’m completely finished with buying ANYTHING from Amazon that IS NOT a household brand name that has been making REPUTABLE PRODUCTS for a very long time. BUY ONCE-CRY ONCE ! There are no exceptions to this rule. There is a very SPECIFIC REASON the best products available cost two to three times as much as the other junk being pedaled by third party “Amazon- Made in China Importers”. Do your research diligently, choose your brands, purchase DIRECTLY FROM THEM, if possible. If your BRAND OF CHOICE is sold by Amazon, make sure it’s Prime, so you can return it free of charge if it’s a counterfeit 😎. I’m not talking about vacuum cleaner bags here my friends. We are talking about stuff that should last a purchaser’s lifetime. A WRENCH ! 😂

As a heavy equipment mechanic for the past 50 yrs (now retired) I have many name brands in my boxes ; Snap-On, Mac, Matco, Cornwell. Different manufacturers have different specialty tools. I use my tools hard. I also have purchased many URREA tools and have found them to be equal in quality to the above popular names. I know, they are made in Mexico but that is better than China.

I'd love to see a TTC vs. Project Farm series - re-test things PF has done and either confirm or dispute PF's findings. And vice versa of course!

@ulogy

2 жыл бұрын

I'd trust PF more overall for real-world uses. No offense to TTC. (He's been around longer and tends to do more real-world testing that matters to me. Much as I'd like my extensions to last forever, I'm not putting a 1/2" adapter onto a 3/4" drive and beating the hell out of it when I just need to drive some bolts.)

@Mike-sy6oy

2 жыл бұрын

@@ulogy agreed 100%. Torture tests are cool, and absolutely interesting. But it's highly unrealistic that most people will ever put their tools through those types of conditions. Even PF has some tests that would never realistically happen to most people. Both channels serve important purposes and I love them both.

@svn5994

2 жыл бұрын

@@Mike-sy6oy PF diagonal cutter pliers video is the biggest joke of all time. “Cheap tool does better because it's soft and not hard unlike expensive tool” meanwhile he's trying to cut nails used for building housing studs with a tool that is only designed to cut copper and maybe 2mm piano wire.

@albanana683

2 жыл бұрын

@@svn5994 I think PF does a great job of presenting all the information you need to make your own mind up.

@stevebabiak6997

2 жыл бұрын

@@johncoops6897 - there is bias with PF. He recently tested some sort of clothing, and gave higher points for clothing that let air flow through more readily. I pointed out in the video’s comments that the better air flow would be nicer in warm weather, but in windy and colder weather the clothing that didn’t allow air to flow as readily would be preferable. I’m sure you know his typical reply, something like thanks for the comment.

Cheap tools are great on the farm. I’m sure they’ll disc under just fine. It all depends on how well the chrome holds up when it gets tilled back to the surface 3 years later.

@alanelliott8106

2 жыл бұрын

Expensive tools have same germination rate as cheap ones

@TerryPullen

2 жыл бұрын

LOL

@vcookster3915

Жыл бұрын

My guess is the reason the opening sizes on the wrenches are higher than average is due to fewer layers of plating. Likely using the same forgings for some other set, but reducing plating to save cost. This should be evident in the future if plating starts to bubble/pit.

The perfect set to stash in the truck or car for when you need something in a pinch, and only in a pinch.

The value of this type of content on KZread is immense. Thanks for all your great work!

You don’t use the open end on a combination wrench to apply significant torque. It is the end you you use for speed. To apply torque use a six point socket with a torque wrench. If it just needs to be operationally tight use the boxer end. To break torqued bolts use the box end or again a six point socket. The open end of a combination wrench should never be used to apply significant torque. So this testing is how much improper use and abuse a tool can stand up to.

@brucetec6597

Жыл бұрын

Thank you. Someone that actually know how to properly use a tool.

I bought a cheap 3/4 socket set in 2004 for $30 at a local Big Lots and they are holding up like a champ. I even put them on a 1/2 impact with an adapter and they do fine. It goes to show you that cheap stuff is getting cheaper over the years.

A while back an engineer friend who works for Amazon told me that Amazon has an algorithm that picks out popular items and they contract with the factory to re-badge their own versions of these items and then try to undercut the other supplier. There is zero thought about the item being usable. It seems like they are just trying to add branding to the equation to do this more effectively.

@lprocter1982

2 жыл бұрын

They can undercut because they don't charge stocking fees on their 'own' products. Grocery stores do the same thing - they'll charge, say, Nestle, to stock a product; but if Nestle makes a grocery store brand product (think President's Choice, Selection, etc.) there is no stocking fee. Hence the lower price.

@nopenonein

2 жыл бұрын

@John Yes Amazon is using the consumer to do the market research for them to find a popular product and then Amazon goes in to undercut whatever brand. Holy shit how a is middle level company to survive facing this Amazon copying juggernaut.

@bobbygetsbanned6049

2 жыл бұрын

Basically everything I have ever seen Amazon Basics is just a rebranded product, but that's common with a lot of companies, not just Amazon.

@bobbygetsbanned6049

2 жыл бұрын

​@@lprocter1982 That's absolute nonsense lol. The cost savings comes from cutting out the profit margin and overhead of name brands. The grocery stores go directly to the manufacturer, and get their own products made, which completely cuts the name brands out of the equation. Stocking fees "charged" by the grocery store are still just paid by the grocery store, since they are the buyer, that's just their way to prioritize who gets stocked near the end of the isle, but in the end the grocery store, and then the customer, pays for everything.

Love the move to testing more and more non-power tools. Keep 'em coming. Would be great to see some ratchet tests comparisons. Particularly if you could take the heads apart and show the various internal designs along with the review.

Thanks for testing, It's always good to know cheap junk is still cheap junk.

@pflaffik

2 жыл бұрын

This isnt even cheap. Barely paid more for a Bacho kit that in addition has Swivel Joint Wrenches.

Another important thing to remember is the pain factor using those thin wrenches - the thinner they are, the more like razor blades they feel against your fingers. Perhaps that's the wrenches method of self preservation? You'd never be able to put enough torque on one to slip it, before guillotining your own fingers off.

@firesurfer

2 жыл бұрын

The only time these wrenches will be useful is in small spaces, and then only if it's not that tight. Sometimes though you really need a thin wrench. I have bought wrenches that were extra thin, but they were usually expensive.

In the words of Ave. "The sting of poor quality lasts long after the thrill of a "good deal" has faded" I would rather hurt a bit more for a good purchase than pay for it every time I use it. These cheap products have more similarities to a subscription service than an actual product 😂

@timpenner7858

Жыл бұрын

"subscription service". 😆

@bradhaines3142

Жыл бұрын

buy once cry once, great way to live

@Joel_Train

Жыл бұрын

"Product or subscription service." I like it. I am going to borrow it and add it in the rotation with my old term, "disposable appliance." Some companies take pride in keeping the fish swimming up sh!t creek w/o a paddle, expecting us to come back for more. Other companies like to deviate quarterly after the "thrill of a good idea" has faded. Snacks for example: The original flavor was perfect. A new garbage flavor comes out quarterly or during holidays to get us to bite on an impulse buy. I have learned the hard way to ignore those and "dance with one that brung ya." There aren't enough pot head focus groups with the munchies at Frito Lay or Taco Bell that can whip up a batch of suicide nachos and convince me the new limited time item is better than the tried and true.

Excellent review. 1 star general is my new user name. Thanks! Too bad amazon removes my well thought out critiques due to "community standards". Community standards like having the same Chinese item being sold under no less than 10 different "brands" made up entirely by rolling ones face across a keyboard and then removing every other letter, all priced all within 23 cents of each other. Just like how KZread will probably remove this comment because I used a no no word. (pro tip: it's Chinese) Edit: also I've been considering replacing my vintage craftsman with tekton, your tests have made me love my tools again. So, thank you.

@trickvro

2 жыл бұрын

Gotta laugh when people are like, "Woe is me, I'm gonna get censored, just you watch!", and then they're not. 😂

@lassaut6794

2 жыл бұрын

@@trickvro eyew to0b is well known for scensso ring comments that go against their agenda. Is this news to you?

@pflaffik

2 жыл бұрын

Chinese is not enough, need to talk about their social media that starts with W to have youtube delete your comments.

@Acetyl53

2 жыл бұрын

@@trickvro Because you're a fool who isn't paying attention. "teehee, look, everything is fine and you're just paranoid!"

@tihspidtherekciltilc5469

2 жыл бұрын

@@pflaffik W? Whinnie the Pooh or Wacefook?

Essentially this is showing how reviews on Amazon are skewed.

1:30 First thought that came to mind "It's Amazon, they want to save on the shipping weight." Has nothing to do with quality considerations, lol. I used to deliver 53' trailers to Amazon warehouses, you would be surprised what they sacrifice for a few pennies. It adds up, they are massive.

I used a grinder to "thin" a wrench to take off and put on bicycle pedals. it was metric (I forget which size, maybe 13mm?). that is the only wrench I ever needed to be thin. These look to be "bicycle grade".

@mjodr

Жыл бұрын

"Park Tool" enters the chat....

I really hope you go on and write reviews on all the tools you buy off Amazon so ppl who don't know about Torque Test Channel can benefit from what you've found and to outweigh all the fake paid for 5 Star reviews. 👍👍

I tested one of the 'better' cheap impact wrenches off ebay ($30 inc battery and shipping). The thing managed a very rusty lug nut... that was all, it died straight after that! 🤣

@bobbygetsbanned6049

2 жыл бұрын

A $30 lug nut, great deal lol.

@chriswatson7488

2 жыл бұрын

@@bobbygetsbanned6049 For $30 it was either try that or get half a gallon of gas! 🤣

@badcampa2641

Жыл бұрын

For 30 bucks Amber Heard would come around to suck it off

Wow. Now this is what I call testing. Major kudos for diligence.

I used to be in the Vine program. I got in because I wrote a lot of reasonably thorough reviews, not because I was popular (I wasn’t). There is absolutely no pressure to write a positive review or give a good rating. Vine members can choose from everything that’s available to review, though you can only have 4 items pending review iirc. I’m no longer in the program because they kicked me out for not reviewing products, it got old after a while plus kids and divorce kept me bust 😆. I finally remembered to check the Vine page and found this message: “Your Vine account has been closed for not meeting our program participation criteria. You will still be able to view your Vine reviews and Vine order history but will no longer be able to request Vine items. We encourage you to continue posting unbiased reviews to be able to participate in the program again in the future.”

I really wasn't expecting what I found here - man, you know how to evaluate a tool! Impressed, good job. I don't recall seeing the Powerfist line on your list - is it off the charts??!

In the 1980's and 90's I bought quite a few hand tools from the Craftsman aisles at the local Sears. No particular reason for that other than it was convenient and they usually stocked pretty much anything I needed. Since then I've done a lot of crazy stuff with those tools, pounding them with sledge hammers to simulate an impact driver, and almost anything that would make a real technician cringe. Haven't broken any of them yet. A lot of the wrenches have some pretty impressive hammer marks - badges of honor for excellent service. That stuff was made when Sears was still a viable retailer, and not made in China. I've got a few tools inherited from parents and grandparents, some of them made in the 1950's. Still work great. I remember when I was a kid, hearing people say "They don't make 'em like they used to". I guess that's still true.

@0xsergy

Жыл бұрын

i've done the same with my canadian tire wrenches. made in china but definitely better than the harbour freight china wrenches that broke on me instantly.

@fionam3554

Жыл бұрын

I managed to break one ratchet handle, and they replaced it. They weren't the BEST, but they were pretty good, and not nearly as expensive as the best. If I get 95% the quality of the best at 75% the price, I take it.

Great job! I enjoyed the testing very much!

I usually try and balance price to performance, I usually never buy top of the line, but somewhere in the upper mid range

Yea Foreal thanks for using your resources to show us all the real facts. We appreciate you.

Yep - just what I thought when you mentioned the “A” team. They’re obviously targeting novice mechanics, single moms, and the lesser fortunate people, who shop Amazon regularly, and looking for a “good deal”. Looks like you get what you pay for…maybe.

Name brand adapters from your favorite colors at the hardware store. Good one! 😆👍 My favorite color is yellow 💛

In the 70's in the UK they were selling sockets set from some kind of aluminium alloy that came from Hong Kong and were given away in Gas stations if you collected points. AT least these are made of steel.

@volvo09

2 жыл бұрын

What a great loyalty perk.... Knuckle buster sockets.

@tonysheerness2427

2 жыл бұрын

@@volvo09 The interior of the sockets just rounded off or the allen key that turned them slipped.

@houseofwonders1

2 жыл бұрын

My dad bought me a set of wrenches a while ago from amazon and each one of them are now 1 size larger. I had a flat tire once on a trailer and I had to use one of the bigger wrenches to take the lugs off and the wrench just bent into an L as I stepped on it. Glad a guy pulled over and helped me. I think they're made out of brass or something cause the inside of them are a golden color

just by looking at their products online compared to others, you can see how they devoted all the money to branding, while keeping the tools below mediocre quality. Thank you for confirming what their own photos of the product show. Goes inline with Amazon brand, cheaper knockoffs of good brands while charging high prices. Kind of sad, they could easily dominate the market by making quality products and saving/making the profit on the distribution/sourcing sides, not on the saving of materials/build side of the actual product.

Nice job, as usual, you get what you pay for! Cheap tools have their place, i.e. if you only need it for 1 job and it survives, great, if you need to depend on it, pay more! Now videos like yours can help inform our choices, but I tend to stick to my older Snap on, Britool, Gedor, etc. even these companies are cutting back on their previous quality to hit a price point now. Thanks for the great content.

@h8GW

Жыл бұрын

Snap-On IS on the trend of cutting back on their old quality, but I have doubts it's for them themselves to hit a better price point.

Itd be cool to see all the adapters testes!

@curtishorton6163

Жыл бұрын

🤣

Love your hardness tester! That Jerry screws everything could save so many phones by using a bit more modern approach! TTC for strength, PF for lubrication!

I would like to see you start doing more reviews these types of toolkits vs the others on the market. Aside from your great tool specific data points, I would love to see your take a a rating system for "first apartment tool kit", "starter mechanics tools", and "a good kit to throw in the car/truck".

@cablenowadays6586

Жыл бұрын

same. I have a craftsman set pretty similar to this but it’s also got 1/2” stuff in it. I’ve never actually used it yet because i’ve never broken anything on my jeep in the trail but it’s there when i need it.

Watching this makes me glad all my tools are 40 years plus old except my impact driver and sockets, older stuff was made to last

YES! It would be great to see you test socket adapters/extensions for impacts!

Love that you mention Project Farm. I’ve been following him since sub-100k and love his stuff. Interesting to see variation in testing!

I was actually looking at this set earlier on Amazon…..thank you for the video….You saved me from buying a pile of garbage 👍

Looks like a good deal. Everyone should buy a set like this. When individual drives break, sockets strip out, and screwdrivers get all chewed up, replace them with better ones-just onesy-twosey. Makes a lot more sense than spending 5 times the amount for quality you’re never going to use.

Thanks for presenting this.

The name Denali has been on Amazon for a long time. I have woodworking clamps I bought on AMZ that are branded Denali from 2008. Not sure if it's the same.

@cchavezjr7

Жыл бұрын

Yup, Amazon has been using the Denali name for a long time. I have some pipe clamps from about 4 years ago. I believe they are the same brand.

I've always viewed the "basics" line of Amazon products as just that, about as cheap and bare bones as you can get. However, they're not always the cheapest and there are other "same price" or similar priced items with a lot more quality. it just seems to be amazon making a profit for themselves as best they know how. cheap out on everything possible and sell it for cheap. they'll get enough sales to make some money off it. Sad Amazon branded items tend to be close to the bottom of the barrel when they've got enough money and know how to make great value products.

@ashkebora7262

2 жыл бұрын

That's capitalism, baby! It distinctly _does not_ produce the best quality products, even with heavy competition... It produces the _most profitable_ products for the competition... and profit is not quality going out the door.

@connorjones1485

2 жыл бұрын

@@ashkebora7262 it does and it doesn’t. Big companies often go like Amazon and Walmart and go for cheap but high volume route, but plenty of reputable companies go high quality-high margin and lower sales. It turns into an either or proposition, they’re going for two totally different consumer markets. You can maximize profit by customer retention, not just by minimizing cost.

@ashkebora7262

2 жыл бұрын

@@connorjones1485 Except you're missing the part where bulk sellers make A LOT more profit than low volume sellers. The bulk sellers like Amazon and Walmart can temporarily directly compete with quality, undercut on prices because they don't HAVE to make a profit on the higher quality stuff, and once the HQ business goes out of business, they can do what ever the hell they want. It's exactly how they wedge out competition. It's exactly why there are only really three-ish actual manufacturers of ALL of the brands of tools. It's exactly why Walmart killed off TONS of smaller stores. Unregulated capitalism (which is basically what we have) *does not* produce quality. Watch a few videos of Apple's repairs and how poor some of their engineering is, and how they are utter dicks to the repair industry, and you'll see that it's not even good for the _after_ market. Capitalism *requires* heavy regulation to produce good. When something *requires* a short, strong leash to produce good ... that means it is _not_ good itself.

@srpacific

2 жыл бұрын

You just said Amazon makes cheap crap but also that they know how to make products. So which is it?

@pflaffik

2 жыл бұрын

@@ashkebora7262 Inconsistent snowflake theory.

PLEASE test the quarter inch socket adapters.

@HDisNotSmart

2 жыл бұрын

"Quality doesn't cost, it pays." This is usually true.

Those thin wrenches can have their place. In hydraulics you will see combinations of fittings that will sometimes lead you to need a tappet or thin wrench. Cylinder assembly being an example as well...

The thinness of the wrenches, and overall kit, is rather similar to the Walmart 'Hart' tool kit. Even the ratchets are eerily similar. Id be very shocked if they don't share the same TTI parent company, or at least the actual fabs that make them.

@Joel_Train

Жыл бұрын

TTI? Milwaukee's parent company?

2 of the most common bolts are 1/4 20s with a 7/16 head, and 3/8 with a 9/16 head. But sometimes you need the heavy duty stuff, 1/2 with a 3/4 head. So generally speaking, I won't even consider a set with no 3/4 wrench. I also prefer a 5/16 to be included in a set, because that's the size of a lot of electrical equipment fasteners. Sure I can use a nut driver, or the end of my 11-1 screwdriver with a bit removed. But not the torque of the wrench.

Hello again TTC Thank you for another Great Video. And thank you for warning us about this one. Keep it real and honest!!!!

Looks like a home owner/car kit. Not sure I'd ever buy it. Thanks for the review guys!

@DUKE_of_RAMBLE

2 жыл бұрын

But... Would indeed make for the /perfect/ emergency kit to keep in your vehicle. Sufficient enough to do some tasks, contained in a nice (enough) case, and cheap enough where who gives a flying fork if it's damaged/stolen/rusted/accidentally left on the roadside _(or its 10mm sockets magically get lost inside the engine compartment, as they are so want to do! lol)_ 😁

@blkmoon33

2 жыл бұрын

@@DUKE_of_RAMBLE oddly enough in 25 years as a tech I never lost a 10mm. Had some stolen by coworkers 🤣

@DUKE_of_RAMBLE

2 жыл бұрын

@@blkmoon33 Well that's why. You're a professional! lol I wouldn't lose any of them either, if they came off a tool truck! (almost said 'food truck' haha)

@VorsprungDurchNik

2 жыл бұрын

@@DUKE_of_RAMBLE You can find much better kits for similar money to stash in your car or give your kid when they leave for college. This kind of kit is for people who just don't know any better and are not likely to actually use it.

@whirledpeaz5758

2 жыл бұрын

Wrench Everyday discussed car kits and recommended the Pittsburg kit from HF because in store lifetime warranty.

Not too shocked here. Love this channel

I brought my little "Screwdriver impact" to work on the car with the adapters for sockets. I didn't/don't expect it to torque things well, but once you break it loose, it will walk bolts out and in with speed.

just discovered this channel...perfect. subbed + notifiers are on.

Everytimes I want to buy new tools I look for your channel if you already tested it! And as always at the end of the video I'm a 100% sure of my choice

Thank you. Now I can add another brand to my blacklist.

Yo I'd never buy this crap but those thin wrenches are actually something I wish I had in my box. Not those exactly, some quality ones that are narrow like that Thanks for sharing your skills knowledge and experience. I appreciate you

@mrmotofy

2 жыл бұрын

I just had a project where I wished I had a thin wrench...had to dig out my old cheap set...hey that fits nice. It's been at least 5 yrs since I needed it last

i would like to see the harbor freight 301 tool set compete in this series, i think the way he measured for hardness and researched what metal was used for the tools gave great info.

@JoeSmith-lp8fl

2 жыл бұрын

Well I don't have data to back it up bit I've had a set of these for about 7 years now. The sockets are pretty good for what they are. The ratchets are okay. The specialty bits are surprisingly good, although the hex ones could be a bit larger for a tighter fit in socket head bolts. The screw drivers are meh. The pliers are not horrible but not good either. The allens are bad. The wrenches are horrible. The adjustable spanner wrench is also horrible and the first thing I'd recommend replacing if you do buy the set. I have replaced the 1/2" and 10mm deep sockets with impact rated sockets but they survived a lot of use on the end of a m18 impact and a m12 fuel impact. Over 2 years of use 6-7 days a week doing assembly. In general HF hand tools are usually okay. Some of them are pretty bad, others are shockingly good. You can usually tell by the appearance. Their low end power tools get a thumbs down from me, higher priced ones are okay. Never buy abrasives of any sort from them such as sand paper or grinding discs, they just tend to suck. That's just my $0.02 on HF.

@leadpilled5567

Жыл бұрын

Harbor freight tools are decent and a great way to fill the tool box with tools that are good enough. It’s one thing if you’re twisting wrench’s 40 hours a week but to do a brake job once a year and other weekend garage tinkering I don’t think you’ll need anything more. I love my Hercules power tools. US general boxes are great.

It’s interesting that project farm has such different results, It seems there is a QC difference depending on what hut the tools come out of. Seriously though I’ve noticed that some times deWalt impact bits fracture in a few uses, vs some I’ve had for years.

I bought a Beta set of tools in year 1980, paying about $2 for each screwdriver - expensive for 42 years ago, but the set is still good as new. Saving money on tools make no sense. Amazon is intent in distributing as many as possible Chinese tools made of "Chinesyum" - a metal that melts under intense sunlight; I kept a set of drill bits paid $2: the helicoidal spiral unwinds when the bits are used, as they are made of some sort of solder alloy aka Chinesyum. Thank you for the nice video - always nice to know of what I've to beware of...

@sebastienceniceros3145

2 жыл бұрын

Chinesium* ftfy

@Jehty_

Жыл бұрын

Of course buying cheap tools makes sense. If you use them twice a year they will probably also hold a decade or more. So why buy something expensive if you don't need it?

Love the project farm shoutout

Thanks for the review that’s definitely for a home owner light duty use at best

Slim wrenches are very useful when working on cars. I purchased a set of thin wrenches for tight spaces

bought an amazon basic ratchet screwdriver. not long into use and the ratchet mechanism got stuck. I had to open it and free it in order to make it work again. the bits it came with were kinda weak too

I would like to know more about who makes China-sourced tools, and Taiwan, too. I don't think that TTC is going to take an undercover trip to Guangdong province, but it would be interesting to learn if there is a Great Helmsman Wrench Factory that makes all the wrenches labeled Made in China.

@TorqueTestChannel

2 жыл бұрын

Taiwan is much easier, China is quite spread out and the manufacturing base around port cities, Shanghai, Hangzhou, Ningbo, and in the south in Guangzhou is immense and nearly countless. In Taiwan there's like 5 key players, which we'll point out in testing similar things soon

Like this type of test. Short, to the point.

This is easily the best review on "Amazon". ;)

I’ll stick with HF. basic but reliable, upgrade as they break.

As a GMC truck owner I felt abliged to watch this.

Thanks for the info

Would love to see you all test the Incgo/ Total/ Emtop brand impact stuff. Theyre quite popular around Sputh asia and the Caribbean.

Lol, I'm not a buyer even if this is a budget set. The set stops at 17mm 😂😂😂 . This should go from 8mm to 19mm at the least. Both in wrench size and socket size.

@TorqueTestChannel

2 жыл бұрын

I understand when some sets skip 18mm, or even 16mm. But stopping at 17mm, or 15mm with wrenches? Just odd

@JakePlisskin12

2 жыл бұрын

Right!!!

@TorqueTestChannel

2 жыл бұрын

He's right about 3/4" being in use pretty identical. What's perplexing though is the SAE going to 7/8" while metric stops at 15mm and 17mm.

@user-cs1ne8gx9u

2 жыл бұрын

18mm was pretty common on GM for a while.

@volvo09

2 жыл бұрын

It's definitely not a mechanics set... Maybe "dad's first wobbly swing set assembly kit".

I mean this tool box is great for someone like me who will use the tools maybe 5 or 10 times in a year max. It’s nice to have something you can grab that’s cheap if you need to put together some furniture or some bs

Just removed 3 heavily rusted on and stripped bolts and have to say from my experience having to get 2 bolt extractors with nearly identical packaging, price often means nothing on Amazon specific stuff. It's a race to the bottom for a company to make 10 different brands to repackage AliExpress stuff from a single supplier to get on that best sellers list. Quality control is a serious issue. A scant few good things to be found, but mostly garbage. Lots and lots of garbage. Too much in my opinion. Especially electronics. I would make some changes as it really hurts Amazon's reputation in the long run. Amazon's basics does have a team of engineers, but the team is quite small and the overwhelming majority of the Amazon basics stuff is just rebranded nonsense. There are almost always better options available for the same or even lower price nowadays.

Thanks for the warning !

Seems like another case of making sure the price is lower than competition and quality be damned. I'm sure they will sell thousands of them.

@TorqueTestChannel

2 жыл бұрын

Boy, doesn't that define the Amazon experience "sort by price" "positive reviews" "must be good"

@MrAPCProductions

2 жыл бұрын

@@TorqueTestChannel Having been on the testing end of most of your videos I can give lectures on the "values" given by most brands. There are so many pretenders when it comes to functional tool systems and the motives behind companies making anything that isn't far superior to what exists really bugs the shit out of me. Building sub-par items (whether its tools, kitchen utensils, or anything for that matter) needs to be a punishable crime.

Good information 👍.

Not having a 19mm is a huge misstep

Well done.

Thank you. I will now cancel my amazon and support local stores and domestic made products. The future is looking bright.

@mediocreman2

2 жыл бұрын

Yep. I'm letting my membership expire for the first time in 10+ years.

@truthserum9157

2 жыл бұрын

Never hade a amazon membership, never will.

@noelv1976

8 ай бұрын

Lol you don’t have to buy this, wtf.

I'd definitely like to see your tests over the "competition." You seem to know what You are doing.

That set mirrors the Dewalt set I have, all the way down to the driver bits in the case. It's been the best kit I've used thus far but I admit I've never used the wrenches yet

@wabio

2 жыл бұрын

Which model number is your set?

@oddojaggins

2 жыл бұрын

@@wabio DWMT73802, I wouldn't be surprised if it was a "white box" situation with the same manufacturer, but the dewalt box wrenches aren't drop forged

@robertstarin2603

2 жыл бұрын

@@oddojaggins yeah I have the same set. The pack out is identical so I went ahead and started comparing and measuring to stuff in this video-- most pieces seem to be different and significant higher quality in the dewalt.

Anagram of Denali is 'Denial' any happy purchasers who actually use these will be there

Seconding the shake test and suggesting that at least some credit be given for the blow-molded clamshells being on a mechanical hinge rather than a flex hinge that lasts no time at all. I'd never buy these tools but, there is a market for the price point.

Like you discovered in your testing, not all Denali stuff is equal quality. I only have one Denali set - a master impact hex head socket set and they are excellent quality.

I can’t wait to see y’all test the gen 4 Milwaukee impact driver

Retesting project farms tests could be really interesting!

Can you do a test of some of those sockets with all the pins that can grab any shape/size nut/bolt in their range? How much torque are you giving up? Do those exist in an impact rated form?

If people that are on a budget for tools just wait for sales and often the big tool brands and craftsman tools can be found for cheap. I have bought craftsman set 120 piece at lowes before for $39. Also some of the harbor freight tools can be reasonably priced and will hold up well like the Icon line

So this goes into the "Gifts for Dad under $100" bin. Dad wouldn't buy it, but he'd pretend to be happy to have this on Christmas morning. And it goes to Goodwill by New Years.

@Confucius_Says...

Жыл бұрын

😂😂😂😂😂

Thank you ...

I enjoyed the more focused and shorter form of this test. I don't need to see every piece tested in every configuration to get an idea of the quality of the tool. I also like that you recognize that not everyone needs the top of line most expensive tool out there. I don't want the piece crap, breaks the first time I use it, cheapest tool. But I do want something that will do the job for the once in while DIYer.

Based off of the style of the ratchet, I'd say it's manufactured by the same plant as Harborfreights low line Pittsburgh stuff.

6:09 So what does that technically make these? "Wrench-like objects"? (very neat to know that there's an ASME standard for this)

I have great compact tool set, mostly sockets for ratchet size 1/4-3/8-1/2 with extentions for each, and the ratchets still works,a very complete set that's been used hard. Half sae and half metric And Not spread out. In a hard plastic folding case that's holds the tools well, and is very portable and still holding up and been use hundreds of times,. I bought about 30 + years ago when craftsman was USA made, it came with 5 wenches, a screw driver bit holder with all the bits you would need, with storage room for more. Vise grips, Allen's, razor knife, wire stripper, connectors,tape,, everything one would need for the salvage yard. About the size of a brief case.. one of the best things I ever owned, they just don't have a solid mostly complete set like that anymore. Now there flimsy incomplete cases with the tools spread out and most made in China.. made lite to keep shipping 🚢 weight down.. now days there are so many to choose from thats sold cheap and made cheap.

As someone on the floors.. we use Proto. I'd actually never seen much Proto, so it's been interesting

These tools are IDENTICAL to the Amazon brand TackLife from a couple years ago. Wrenches look cheaper, maybe other cost cutting measures. The box is a different color. Other than that its Identical.

I don't like Amazon and the way they sell things until they can develop their own, then begin to shadow the other brands to favor their own. So I'm not interested. But I love your video and deep dive into it, so great job.

Thanks for posting this test which tells us that the Denali brand is absolutely awesome for light duty assembly and disassembly of such things as toy wagons, swing sets, and coffee makers. Just don't rely on these for tie rods, ball joints, or anything of that nature.

Yes the case matters not just for the rattle of the tools but also for the lousy hinges and the lousy latches and you guys need to test for that sort of stuff particularly the hinges and latches that are doomed to fail on many products

Out of all the brands that I have used in the past, I prefer Makita for corded tools, and Ryobi for everything else, hand tools Estwing. Although Craftsman still has a lifetime guarantee after purchase.