AMAZON TOOL HAUL: The Best Gadgets I've found.

Тәжірибелік нұсқаулар және стиль

Black Friday sales often drive out new and innovative products for the new season and into the future, it is also a time when we can save a bit of money on things ... or so I thought, when one item from my purchases of three was lost, I canceled the order and re-ordered about 2 weeks later, only to find that the small item I ordered was $15 cheaper than the Black Friday Sale - buyer beware I remind myself. But there they are, a new version of a clamping device that I often use when assembling or dry fitting projects, a very innovative speed square with some new kinds of features, that was surprisingly accurate, and the jig I will find most useful, a series of round-over templates for using my palm router to round over the corners of tables and similar items and get perfectly matched rounded corners. So check out tool deals from this Amazon Haul!
My Amazon Store with all the products in the video listed - www.amazon.com/shop/woodworkweb
****************** More Woodworking Tool Videos
Amazon Tools You Will Actually Use! (well, mostly) • Amazon Tools You Will ...
Terrible Tools - Colin's Most Hated Workshop Tools! • Terrible Tools - Colin...
Getting the Most from Cheap Tools: • Getting the Most from ...
Beginner Woodworking Tools: • Beginner Woodworking T...
Tool Review Playlist: / playlist
******************
#woodworkingtools #Amazontools #amazonfinds
Read the Full Article on the Amazon Tool Haul Here - bit.ly/3HlRZkZ
*** Taylor Tools Affiliate Store - lddy.no/18zk
*** Magswitch Affiliate Store - mag-tools.com/discount/COLIN_...
*** Canadian Amazon Affiliate Store - bit.ly/38h1uib
*** T-SHIRTS and Fun Stuff - teespring.com/stores/woodwork...
**** Subscribe here - / knecht105
** Like me at Facebook: goo.gl/DLgvoa
** Visit the website: www.woodworkweb.com
** Follow on Instagram - / colinknecht
** Follow on Twitter: / woodworkweb

Пікірлер: 81

  • @essexbarnworkshop8578
    @essexbarnworkshop8578 Жыл бұрын

    I have the clamps and the templates! They are both excellent and used often in my shop.

  • @MCsCreations
    @MCsCreations Жыл бұрын

    Excellent tools, Colin! Thanks! 😃 Stay safe there with your family! 🖖😊

  • @terryrogers1025
    @terryrogers1025 Жыл бұрын

    Thanks for taking the time to review. I am going to look into the 90 degree corner clamps.

  • @bobsacamano1274
    @bobsacamano1274 Жыл бұрын

    Colin is the Mr Rogers of woodworking KZreadrs…so kindly of manner that you barely notice you’re being schooled. No wonder he has so many subs. 😊

  • @coloradomountainman8659

    @coloradomountainman8659

    Жыл бұрын

    More like Captain Kangaroo.

  • @johnrice6793
    @johnrice6793 Жыл бұрын

    Most excellent!! Those are indeed very worthwhile tools. Thank you.👍👍

  • @jroastpotatoes
    @jroastpotatoes Жыл бұрын

    I love you man, you make videos that have an oddly rare, almost singular balance of style and substance. Quick and easy and accurate if you need it; also clever, in-depth and robust; for when you want more. Thankyou gaffer.x

  • @johnjensen8560
    @johnjensen8560 Жыл бұрын

    I have those red L clamping brackets and I have found that the clamps that come with them are also very nice for attaching an auxiliary fence to your table saw fence using a board that has holes drilled into the top edge to accept the clamps. John Jensen from British Columbia.

  • @kanukkarhu
    @kanukkarhu Жыл бұрын

    I like that little speed square. 👍🏻

  • @timberrecycling
    @timberrecycling Жыл бұрын

    i have 2 pairs of those right angle braces and they're fantastic! they help a ton during dry fits and assembling. they're knock offs of woodpeckers but from what i can tell are about 90% of the quality for 10% of the price lol

  • @A6Legit
    @A6Legit Жыл бұрын

    That speed square extension is a nice feature. I wonder if it'll keep square after a lot of use. The pin feature is handy too

  • @9catlover
    @9catlover Жыл бұрын

    i got the same triangle. Thanks for this video...really helpful

  • @joebrown1382
    @joebrown1382 Жыл бұрын

    That's a nice Square & corner radius pieces.

  • @markglabinski3016
    @markglabinski3016 Жыл бұрын

    I like the cob-webs on your circular saw. Looks a lot like mine.

  • @centurion5558

    @centurion5558

    Жыл бұрын

    🤣

  • @christopherdean1326
    @christopherdean1326 Жыл бұрын

    I've been thinking about getting those corner clamps for a while now, and I think you've just sold me on them!

  • @A6Legit
    @A6Legit Жыл бұрын

    Amen to sales not always being sales. Don't trust it unless you've been monitoring the items price.

  • @hassanal-mosawi4235
    @hassanal-mosawi4235 Жыл бұрын

    Thanks for sharing that!

  • @garyreadler4886
    @garyreadler4886 Жыл бұрын

    Cool tools, thanks for these.

  • @thebeaglebeat3615
    @thebeaglebeat3615 Жыл бұрын

    Nice one, love the templates.

  • @MrMarkpeggy
    @MrMarkpeggy Жыл бұрын

    Thanks for another great video, Colin. 👍

  • @vivaeltempranillo
    @vivaeltempranillo Жыл бұрын

    I'm so glad I came across your channel. Thanks for sharing, I have a lot to catch up!

  • @oldkingcrow777
    @oldkingcrow777 Жыл бұрын

    I noticed my Swanson combo square got accurate once I flipped the lock around to thr opposite side. You have to flip the ruler, unscrew the lock completely, pull it out snd flip it. I actually like it now, and thr plastic spee dsquares too I love. They're hard enough that they've not yet dented from dropping, but they're cheap enough anyway to stock multiples, ans they're dead on, evidenced by multiple perfect cuts on a track saw Almost nothing hurts quite like doing all these measurements, being confused why they're off, rhen realizing your square is junk 🤣

  • @TomRubicon5949
    @TomRubicon594911 ай бұрын

    I 3D printed the last thing you showed - I recognized it immediately. Very interesting video!

  • @ihrescue
    @ihrescue Жыл бұрын

    Thanks for your useful review. I like the innovation shown by the designers. Isn't that an innovative way clamps attached to the corner frame on the corner clamps. Good idea.

  • @shenkers
    @shenkers Жыл бұрын

    I think I will try to design and print those router templates as needed with a 3D printer. Having said that it just came to me that I could also design more complex router templates not only for corners Thanks for the inspiration!

  • @Twin_Flyer

    @Twin_Flyer

    Жыл бұрын

    No need to design them, just check the usual 3D places and they are already available

  • @bigsparky65
    @bigsparky65 Жыл бұрын

    I have a set of metal router templates, I usually use mine on my router table

  • @simplyphil.photography164
    @simplyphil.photography16410 ай бұрын

    I have the same make of speed squire, it's good, I brought this after seeing this on your channel.

  • @davepruitt2739
    @davepruitt2739 Жыл бұрын

    Just when I recover financially from holidays, you post something neat like this.. 😊

  • @jimclark6256
    @jimclark6256 Жыл бұрын

    On the first corner squares, a nice feature would be a ledge across the top to level the edges. What do the viewers think?

  • @MrAlliecaulfield
    @MrAlliecaulfield Жыл бұрын

    Just found you. Definite sub. Love the tool review. Bought the square. Thanks for the info. Will be watching

  • @outbak2
    @outbak2 Жыл бұрын

    i have some of those templates but prefer to use them on a router table rather than with a trim router

  • @billybike57
    @billybike57 Жыл бұрын

    Evidently you haven’t used your circular saw in a while it was full of cobwebs 😆

  • @SawsetTools
    @SawsetTools Жыл бұрын

    Great info.

  • @marymiedema5478
    @marymiedema5478 Жыл бұрын

    So enjoy your videos, Colin, and learn a lot! Have been thinking about getting a set of templates and you have me convinced. What is the pencil you are using in this video? Will be watching for the upcoming video on finishing techniques. Thank you for all you do.

  • @loydalexander154
    @loydalexander154 Жыл бұрын

    Good video I like some of them pretty cool thanks

  • @aaudain1
    @aaudain1 Жыл бұрын

    Great idea 👍👍👍👍👍👍👍👍👍👍

  • @projectwood7221
    @projectwood7221 Жыл бұрын

    Awesome my friend.. continued success to your channel

  • @BlessedLaymanNC
    @BlessedLaymanNC Жыл бұрын

    I have some of those yellow speed squares. They were inaccurate so I did not use them. Then I saw someone on YT use a piece of sandpaper on a glass to square the sides square. So, don't throw it away. You can salvage it. I must have been slow. The first two items are sold out. Thanks for sharing.

  • @williamreadon9052
    @williamreadon9052 Жыл бұрын

    the 90 degree clamps work good on butt joints but terrible on miter joints

  • @markhiggins3054
    @markhiggins3054 Жыл бұрын

    Thanks heaps - do the lugs get in the way of the router base as I have the same one.

  • @greenbike11isadouche
    @greenbike11isadouche Жыл бұрын

    Looks like a spider had been using your circular saw 🕷️

  • @andreroussel
    @andreroussel Жыл бұрын

    Love your videos, thanks for making them. For your untrustworthy square there is a simple solution. I had bought several cheap aluminium squares from Princess Auto and half of them were off square. All I did is square them on the table saw using my sled and placing a small piece of wood underneath the square that was a bit higher than the lip of the square so I could butt the thick part against my sled. Just a bit of light sanding after to remove the sharp edges and I had some good squares. This would obviously also work with plastic squares. Tip: I use a permanent marker to draw a right angle on the corner of my squares once I have verified they are truly square. This way I know I can trust them.

  • @jimclark6256

    @jimclark6256

    Жыл бұрын

    I would have just dropped them in the trash, but to each his own. Have fun with sawdust.

  • @TheGregWoodBand
    @TheGregWoodBand Жыл бұрын

    I can spend hours at your store, it’s just pure a dream come true for woodworkers! Thank you!

  • @Toyotajunkie
    @Toyotajunkie Жыл бұрын

    Lol! The corner clamps and the square are both "unavailable" and the template kit isn't something I currently need. Although it does look like a decent set and at $35 also seems to be a great price.

  • @daviddura1172
    @daviddura1172 Жыл бұрын

    GREAT VIDEO...THX

  • @kamleo1685
    @kamleo1685 Жыл бұрын

    Collin, would you have been able to do the same demonstration using a compact or larger size router? Most videos and printed literature that I have seen show a table mounted router and the user holding the template in place while guiding the wood through the operation.

  • @cletusrobinson
    @cletusrobinson Жыл бұрын

    Hah! I have the same set of red angles!

  • @vashon100
    @vashon100 Жыл бұрын

    7:51 radii vs radiusessss

  • @andrewpinson1268
    @andrewpinson1268 Жыл бұрын

    I have the clamps but the Woodpecker police showed up and required me to buy it from them. Probably cost three times what you paid for yours.

  • @tony5006
    @tony5006 Жыл бұрын

    When using a square as a guide for my circular saw I always it with the “shoulder edge” towards me so that pushing the saw forward keeps it right up to the wood I’m cutting. The way you showed to use it would tend to push it away from the wood?

  • @chrisgriffith1573
    @chrisgriffith1573 Жыл бұрын

    Your speed square is currently "unavailable", however I found no less than 5 other listings for the exact same square, ranging from as little as $19.00 on up to $32.00. These are the EXACT same thing, but using different marketing pictures, and coupled with one additional item, such as a marking pen, or a rafter square, whatever!

  • @vashon100
    @vashon100 Жыл бұрын

    Triangle "currently unavailable " LOL

  • @316woodworks9
    @316woodworks9 Жыл бұрын

    You are a staple to KZread wood working videos. Awesome video eh?

  • @valterleao2798
    @valterleao2798 Жыл бұрын

    PARABÉNS…, sempre esbanjando simpatia e muitos conhecimentos, sempre com novidades que nos auxiliam e muito no dia dia 👍 Abraço aqui do Brasil 🇧🇷

  • @KpxUrz5745
    @KpxUrz5745 Жыл бұрын

    I'm not a fan of the radius templates or the folding speed square. I avidly study catalogs of woodworking tools and specialty items, and what I usually find is that not only are most such items far overpriced, but they actually seem superfluous. I usually finish studying the catalog and buy nothing. I really love tools, but so many extra gadgets are not worth the money or the aggravation of using them, plus I already have an overwhelming number of tools.

  • @criesbergwoodcraft
    @criesbergwoodcraft Жыл бұрын

    Must not use your Milwaukee saw much. Cobwebs in the handle.

  • @EmmanuelLorenzo

    @EmmanuelLorenzo

    Жыл бұрын

    looks like a youtuber instead of a woodworker for me...

  • @michelecrown2426
    @michelecrown2426 Жыл бұрын

    I loved the angle square, unfortunately it's not available to order :(

  • @paulsylvester1394

    @paulsylvester1394

    Жыл бұрын

    Neither are the right angle brackets. Guess they are made from that special material, unobtainium! Not good when your video points to items we cannot get.

  • @debluetailfly

    @debluetailfly

    Жыл бұрын

    Maybe they will be back . . .

  • @zwebsterz
    @zwebsterz Жыл бұрын

    Where are these made?

  • @grahamrankin4725
    @grahamrankin4725 Жыл бұрын

    The L braces are out of stock with no expected date.

  • @ot9180
    @ot9180 Жыл бұрын

    Practical in the atmosphere of the shop?

  • @timothysteadham331
    @timothysteadham331 Жыл бұрын

    Why does the corner that you cut out look odd? In the video from my perspective, the left side of it doesn’t look like it meets the edge of the board very well.

  • @Gazman299
    @Gazman2994 ай бұрын

    I very much enjoy your videos, but links to the tools that your commenting would be helpful 🙂

  • @thomasbrubaker4627
    @thomasbrubaker4627 Жыл бұрын

    Those tools look high quality. Still looks like you struggle to use them.

  • @acerjuglans383
    @acerjuglans383 Жыл бұрын

    Is that a.....cobweb....on your circular saw?? Lol, guess its not a commonly used tool in your repertoire.

  • @nonexman
    @nonexman Жыл бұрын

    Wow, I do not know how you're using the Jevons squares but I've never had ANY issue with them - using inside or outside. They are my favorite squares. I have to admit I was amused that you said you "had to use speed clamps with them." later, with the (always over-priced) Woodpecker squares, you showed how it could be faster with a speed square. Sorry, I've followed you for years, and you are usually right on target, but on that one tool, you missed first base. Sorry

  • @JCHaywire
    @JCHaywire Жыл бұрын

    I love your videos and the content is well-chosen and sells itself. I notice that you make a lot of remarks under your breath. What you're saying is usually important, but appears as a sort of tossed-off aside as you are forming your next thought. I listen to KZread through a fairly aggressive audio compressor, so I'm able to hear when videos are quiet--but your content manages to slip past because everything else you say is relatively loud. Test this by having somebody who doesn't know what you're saying listen. Chances are that since you know the script and know your own thoughts, you may (?) miss these verbal asides. Cheers and best to you. Again, thank you for excellent content that has gotten zillions of clicks from this user! Listen around 2:40 for an example.

  • @briandufty5081
    @briandufty5081 Жыл бұрын

    Ĺ

  • @martinoamello3017
    @martinoamello3017 Жыл бұрын

    I make L brackets from 3/4" cabinet grade plywood and drill 3/8" holes in them and use fence clamps.. Much cheaper and easier to setup..Nice thing about plywood is you can make corner braces any size you like and use any style clamp you want..cheapo spring clamps, etc.. I build cabinets and shelves, etc., every week.. Can't afford every single overpriced gadget from China and not too crazy about supporting the CCP anyway..

  • @robertcornelius3514
    @robertcornelius3514 Жыл бұрын

    Thanks to Biden/Kamala's inflation I can't afford to buy anymore tools.

  • @robertkat
    @robertkat Жыл бұрын

    That is all they are, useless gadgets.

Келесі