Counting the days until the new sawmill arrives, and for he projects to continue.

@OutpostReview

26 күн бұрын

lol Irene, “keep on truckin “

I think you did a great job on that foundation!

@OutpostReview

26 күн бұрын

Thanks! We think it will hold anything the mill can handle

I’ve always heard , Richard , if you don’t have time to do it right the first time , how are you going to have time to do it over a second time ? You have done every job right that I have seen you do , congratulations 👍

@OutpostReview

26 күн бұрын

Well thank you for the kind words. I have had to go back on a few things but try to think it through as I go.

Hey there Richard. I agree with you that a dowel to put in holes will serve as a dirt stopper and keeps the bolts and nuts from rusting. Awesome job and looking forward to seeing you assemble the new sawmill. God bless you all.

@OutpostReview

24 күн бұрын

That’s right. I will wait till they shrink some before tightening again

I think you have a winner there Richard. Having access to those nuts could save you if you would have to do any changes to the set up and moving of the sawmill. Stay safe and keep things going your way around there. Fred.

@OutpostReview

26 күн бұрын

Yeah, I don’t think I would wanna close it up fred without being able to have access back into it just in case. But I’m hoping that I won’t have to mess with it in my lifetime.

That's some darn fine work brother...

@OutpostReview

26 күн бұрын

Thank you, sir. We think that it’s going to take anything at the sawmill and hand out and then maybe a little more.

Over kill under kill looks good like every thing you do keep up the good work !!

@OutpostReview

26 күн бұрын

Thank you for the nice comment and glad that you were enjoy the work we are doing

Das ist super Arbeit von dir einfach Spitze Danke Gruss aus Germany 👍🏼👏🏻👋😊🙋‍♂️🇩🇪😁

@OutpostReview

26 күн бұрын

Thank you for the nice comment and we hope you have a great week Jose

Coment: I watched the other video you talked about yesterday, I’m more impressed with your design than the other. What you have is like you said OVER KILL but it will be there for a long time!!! Great work !!!!!!

@OutpostReview

26 күн бұрын

Thank you for the nice comment. I think it’s going to handle the load that that sawmill is capable of and then some. I’m at peace inside and I don’t have any worries about it.

Good afternoon Richard, I think that the holes can be filled with wax from an ordinary candle; the wax will protect the wood and, if necessary, it will be easy to reach the bolts. I do this, it works great

@OutpostReview

26 күн бұрын

Good idea. We have had a lot of suggestions. Thanks for the comment. Now I just have to decide what I’ll do

Richard cover the holes with plugs and I would even cover the Timbers tops with ice and water shield to protect it from oil and other chemicals that might soak in to the timber that can cause it to deteriorate or become flammable.

@OutpostReview

26 күн бұрын

Excellent idea, Raymond. My thought was if it covered it enough and won’t move, those holes would be covered, and the top of the pressure-treated lumber would be protected.

I am so jealous of your set up Richard. The fact that everything you do is so amazing and that you have enough land and the equipment to build homes for your children is a dream come true. May God watch over you and your loved ones.

@OutpostReview

27 күн бұрын

Well, I’m excited to be able to help them as well. If they decide that’s what they want to do. We want to thank you for all your support and hope that you’re enjoying the videos as we go.

I use the Timber screws and they are great, especially considering their strength.

@OutpostReview

26 күн бұрын

It certainly helped to pair those together. It also took out some of the discrepancies that would have been there only using the anchor bolts.

Plugs are a good idea...also,slapping some coal tar underneath and on the side of the timber skid towards the road should keep the rot at bay

Richard you know I love your videos but it looks like it’s going to be awful tight in there with the new mill. God bless and stay safe.👍

@OutpostReview

27 күн бұрын

Yeah, like I said, it wasn’t built with getting a new mill in mind. But looking at the dimensions, I can get it in there.

You Guys are the Best! Thank you for the Shout Out on your Video I am so glad you saw our video, your comments are priceless! Ironic we both building bunks for our Saws at the same time. You guys take the prize for Most Heavy Duty! Keep it up guys! I’ll be here on your next one!🤠👍

@OutpostReview

26 күн бұрын

Well, I’m not sure if ours is the most heavy duty, but that was the catchiest title. I could think to send out a video, lol. You guys are doing great down there. Just keep putting 1 foot after the other.

I would go ahead and plug the holes as you said, keeping the saw dust out on the bolt holes will save a lot of work if/when you need to get to the nuts to adjust them. once the timbers dry out you man need to run the nuts back down from time to time. you are doing great on your mountain, take care

@OutpostReview

27 күн бұрын

Yeah, I’ll probably have to adjust them overtime like you say. I need to be able to get in there to fix something if it goes wrong. Can you imagine trying to replace one of those and not having access to take the nuts off? That could be a disaster, lol.

Wow 😳... Today are you realy handsome😍😍😍🤗🤗🤗👍👍👍

I think the dowel plug idea would be the best route to take also.

@OutpostReview

27 күн бұрын

Yes, I think it needs something. But I wanted other ideas if people had any on options available

The builder way is the best way the plan is in your mind it's hard for people to visualize your plan

@OutpostReview

26 күн бұрын

You’re right and sometimes it’s hard to put into words

Enjoyed, thanks for sharing.

@OutpostReview

26 күн бұрын

Have a great week, Richard

Plug the holes with 2" wooden or PVC dowels, to keep the water and sawdust out of those holes. I think your son is think about when he has to change those out after you're gone.😂 always thinking about the inheritance right...😂😂

@OutpostReview

26 күн бұрын

Thank you for making the comment. All of them seem to be suggesting some good ideas so this is good. Talk going around.

What I would do? Spokennoise is have a board the same width of each one of your 6 / 6 of your runners. Cover the top of it and then it's all screwed down. If you had to remove it, you could remove it and if it if the legs aint gonna go where the holes are just put you some little blocks, it'll cover the holes and set it. Set a screw them down and then take them off. When you need to to get to the bolts, whatever it'd be easier than by taking a plug and sticking in there and wondering if you can't get the plug out, what are you going to do? Is screw a screw down in there and pull it out. And what if that don't work? You just keep breaking it and it just shatters up, and you mass up your threads on the inside. So just take a block of wood, a little bigger than your hole.Cover your hole after you get your shawl set up and then you're fine

@OutpostReview

25 күн бұрын

I think that’s a good idea and kind of what I said when cutting a plug to go in so I could pull it out. Can’t put anything else on top because I have already raised the total height 8 inches from normal

plug hole with spray foam just enough to cover , rubber flap , sliding dovetail cover

@OutpostReview

26 күн бұрын

Good idea. We’ve got several comments that suggest different things which gives me lots to think about.

You may want to consider an ice and water shield application on top of the double 6x6 beams

@OutpostReview

26 күн бұрын

We had another comment similar to this and I think you’re right. All the comments are suggesting really good ideas.

@loveguitar8069

26 күн бұрын

I am sure you will receive other good ideas but in the end as you stated, you will choose the one that works best for you.

I would definitely plug them with hardwood dowels so that as the treated shrinks, the plug stays in. You can remove them with screws anytime you want.

@OutpostReview

26 күн бұрын

I think you’re right that’s a very good idea. We’ve got many comments on different ways so this is good talk

put a little pea stone or something and fill the holes with 1/2" bondo. A whack with a hammer and the bondo will break

@OutpostReview

26 күн бұрын

Thanks for the idea. The comments are suggesting really good solutions so we appreciate all of this input.

wILL THE ANGLE braces at the top of the opening interfearn with how far the saw on the tracks can travel

@OutpostReview

26 күн бұрын

Well, I laid the track out with that in mind, but I didn’t have exact measurements on everything so I did allow. I think a couple of inches on the inside from what figures I could find. We’ll just have to wait and see when it gets here.

Does mean you might have to create more over hang to ensure the head is kept out of the elements? Sorry if you already answered this kind of question.

@OutpostReview

26 күн бұрын

Wood miser is going to send us a cover for it as a gift which is so nice of them

@marshallcole9468

26 күн бұрын

@@OutpostReview right I started flapping my digital mouth. I thought I heard you address that very issue. I’m thankful for your patience and I look forward to the end result with your sawmill. As always thanks for the KZread videos!

Can you get plastic or rubber 2 inch plugs for the holes??

@OutpostReview

24 күн бұрын

Not sure but will look

Will you stain the foundation boards? Or should they dry first?❤

@OutpostReview

27 күн бұрын

Not sure about the pressure-treated. I could rub some of the timber oil on them. It won’t hurt him one bit. I thought about painting, actually the bottom portion. If I left them, they would probably eventually deteriorate and break off.

I'd plug them, or they will be pain trying to clean out.

@OutpostReview

26 күн бұрын

You’re right and that’s what we intend to do

I like how you build your framework but it's not perfect in my opinion I have some experience with woodmizer and there's saw frames is not good enough in areas of content they move sometimes. I think you should of get 2 4/6 metal beams remove feet from saw and set directly on beams this way it never moves. Good luck with.

@OutpostReview

26 күн бұрын

I intend to screw feet to 6x6 that way I can still level without using shims if anything ever settles or fails. But thanks for the comment. I had my last one tied to foundation and no way to level

@sergeystrizheus3368

25 күн бұрын

@@OutpostReview on woodmizer it's constantly battle with leveling at joint " not good design " I would not recommend using those feet just custom bolt to another metal beam

Привет надо работать и разказывать понятней будет!

@OutpostReview

26 күн бұрын

Sorry that we can’t translate very well, but we think that the foundation is going to be strong enough for the new sawmill