Thank you all for watching. This was part one of my tablesaw transformation. Make sure you don't miss the next episodes because this is going to be one awesome workstation!! 🔥👊

Enjoyed your conversion very much. You gave me great inspiration to covert my four-month-old Dewalt DWE7491RS Contractor Saw into a cabinet saw. I used flatted ½" sheet cast iron plate (thicker than most true high-end cabinet saws) 31½ x 44" (support with adjustable round steel tubes) to construct my top and hard Maple for cabinet. It turned out spectator. Thank you.

It's so refreshing seeing someone do this with true to life tools and materials. If I had a million dollars of tools I wouldn't be making this. Beautiful work with what you have

So simple. thank you

This is a REAL DIY project. Back to absolute basic in both materials and technique, love it. Great to see a young guy actually using a hand saw. Smashing series DSW, excellent.

@Dutchshedwoodshop

3 жыл бұрын

Thanks David!

I'm definitely going to follow this series.

@Dutchshedwoodshop

4 жыл бұрын

Thanks Andy!! 👍

Hello my friend. Good idea. A large table for the table saw. The improved Saw workstation will provide a very useful environment. Thank you for the nice project. I look forward to both parts. Thank you for sharing. Greetings....

@Dutchshedwoodshop

4 жыл бұрын

Thank you very much!

Can’t wait to see the rest... great idea.

@Dutchshedwoodshop

4 жыл бұрын

Thanks Eddie 👍

Interested in this One small comment top would be a lot smother using plywood Keep the rest of this build going I need to do something similar

@Dutchshedwoodshop

4 жыл бұрын

Thanks mate. That's what i wantedvto do at first to. But the advantage from osb next to that it is cheap. It also has some jind of varnish on the top wich makes it very smooth. Plywood on the other hand is not. Thanks for watching 👍

Nice job! Looking forward to following the series as you build it out.

@Dutchshedwoodshop

4 жыл бұрын

Awesome! Thanks for watching 😁

Great solution in getting more workspace!!

@Dutchshedwoodshop

4 жыл бұрын

Thanks buddy 👍👍

Looking really nice. I like all the workspace you have added to your table saw. Looking forward to the rest of the series

@Dutchshedwoodshop

4 жыл бұрын

Thank you both :)

Awesome buddy. Looking forward to the rest of this project! 👍

@Dutchshedwoodshop

4 жыл бұрын

Thank you very much!

Looking good so far.

@Dutchshedwoodshop

4 жыл бұрын

Thanks mate! 👍

Wow that's really awesome mate! Great idea. Never thought about that!

@Dutchshedwoodshop

4 жыл бұрын

Thanks man!

Nice work. I'm here because I'm looking to make a few improvements to my own saw. I would fit a riving knife if I was you. Stops the wood from pinching onto the back of the blade and kicking back.

Nice 🙌🏻 some great space for large material. Interested to see how the OSB surface is like with material run across it over time. Now to watch part two 😁

@Dutchshedwoodshop

4 жыл бұрын

Thanks! yeah me to. i think it will hold just fine :)

@jaimealves3742

Жыл бұрын

You can always use plywood or MDF for that part, I did one based in this video and it's rolling perfect

Nice improvement, look forward to the next video.

@Dutchshedwoodshop

4 жыл бұрын

Thank you Jos!

Nice, waiting for part 2

@Dutchshedwoodshop

4 жыл бұрын

Thanks buddy!

good job ! i would nt have use OSB but nice one, i'm gonna do the same

perfect, i like osb

What a great video. I was wondering, I have a medium sized table saw on its own stand but I am considering attaching it to an old saw bench. Would this top still work on that? It’s a similar size saw to yours but its not on long legs. Just wondered. Again great video and now I am going to look at part two. Have subscribed 👏🏼👏🏼

Excellent video.

@Dutchshedwoodshop

3 жыл бұрын

Thanks Andy!

Improvement its good, but your sander is glorious !!

@Dutchshedwoodshop

4 жыл бұрын

Thank you sir! 👍👍

it's a huge job!! my only suggestion is to switch from osb to melamine. I Know it's more expansive, but it's smoother and this is a job that remains for a very longtime

@Dutchshedwoodshop

4 жыл бұрын

Thanks buddy. That is het better option indeed but i keep it like this for now. I can change it any time. Thanks for watching!

@TheGrantAlexander

4 жыл бұрын

I agree with this guy. Anything but OSB #SayNoToOSB

@Dutchshedwoodshop

4 жыл бұрын

@@TheGrantAlexander yess OSB!! 😄

Bigger is better as they say! But I am with Alberto #JustSayNoToOSB

@Dutchshedwoodshop

4 жыл бұрын

🤣🤣 thanks buddy! But i'm keeping it this way!!! 😜

What is the proper term for that L square with the holes in it you start using at 3:43? I've been needing one of those, but don't know what to call it so I can buy one.

Interested to see the next installment! Maybe a built in router table?

@Dutchshedwoodshop

4 жыл бұрын

Thanks. Yes i am thinking about a built in router. Need to figure iut how i am going to do that 😄

I actually dissasembled my entire saw. And I think I can make it so that I have a top of 22mm thick plywood, but the problem is the raising of the motor, I have to make a hole in the top surface so the motor can raise all the way. Not that hard, not ideal either though, because that's exactly where you want the strenght

That is some rough plywood, cdx, for a table saw top. Are you going to cover it. Other wise great idea for my small table saw improvement.

@Dutchshedwoodshop

3 жыл бұрын

It works good this way. I chose osb because of the costs. Plywood will work better i am sure

Cool work, top. 👍 👍 👍 Liebe Grüße Martin

@Dutchshedwoodshop

4 жыл бұрын

Danke martin!! 💪💪

How do you make sure that the top was square to the blade?

did you put new table on old?

What company sells or make the L-square you are using in the video?

@Dutchshedwoodshop

4 жыл бұрын

Thank you! The company is called wolfcraft!

Definitely be watching this with interest. One thing mate will you be adding the riving knife back on? As I remember yours was quite tall preventing the use of some sleds, I cut mine down with a grinder. Looking forward to the fence set up! ☺️

@Dutchshedwoodshop

4 жыл бұрын

Thanks buddy! Yes the knive will be back on. Need to cut it off and make a zero clearance insert. Thanks for watching!

I like what you're doing. I'll try plywood for the top. Isn't 9mm too thin for the top? Only asking....

@Dutchshedwoodshop

3 жыл бұрын

Plywood is better indeed. Is is thin but i rests on the tabletop and has support underneath. I mostly use this as a work table now 😉 i can easily stand on it

How did you square edge of the top with the blade?

@Dutchshedwoodshop

3 жыл бұрын

I used a large square for that and marked the positions

how will you tilt the blade to 45 degrees now?

@Dutchshedwoodshop

4 жыл бұрын

Thank you Dan. Check my third video of this table saw project 👍😜

Danger: kickback

I did something similar. For some reason it is high in the middle. Right close to the blade

@Dutchshedwoodshop

3 жыл бұрын

could be that your top is not flat. mine was a little bend aswell.

@lancep9394

3 жыл бұрын

@@Dutchshedwoodshop yeah. Put a straight edge on it. Peaks at cut in top where blade is. Don't know what to do with it

Waiting for second upgrade

@Dutchshedwoodshop

4 жыл бұрын

Hopefully this friday! 👍👍

Did you give up? Wiating for episode 4 and 5 :)

Is there a reason for using such a crappy particle board top?? But overall it's funny I was just working on my own table saw you gave me a great idea thanks!

@Dutchshedwoodshop

3 жыл бұрын

Thanks! i liked t at the time. will change it soon!

This would take forever to do a truly square crosscut.

Follow!

@Dutchshedwoodshop

4 жыл бұрын

thanks

you lose cutting height this way

@Dutchshedwoodshop

3 жыл бұрын

yeah 9mm. i would never use the full 90mm hight

Osb is the most nasty material for this :(