Table Saw Extension and Storage
Тәжірибелік нұсқаулар және стиль
I made this table saw extension to take advantage of unused space on the right side of my table saw. A shelf on the under side is a great place to store push sticks and accessories.
I made this table saw extension to take advantage of unused space on the right side of my table saw. A shelf on the under side is a great place to store push sticks and accessories.
Пікірлер: 11
Just this week I'm working on a similar project. The arms on my saw extend with the fence so I'm putting a router table in the area where you put your shelf. I'm also building a new base to support the (Dewalt portable) table saw and the router station. Thanks for the inspiration.
@CipsWoodChips
9 жыл бұрын
Hey there Kenny. Lately, I been spending a lot of time cleaning-up and trying to make places for things. That table saw takes a lot of room. This should help a little bit. Thanks for watching.
@billwells8054
9 жыл бұрын
Kenny, see current issue of Woodworker's Journal (January/February 2015) for my article on how building a router table extension with built in dust control..
That's tidy work Cip. I was going to build a router into my table saw extensino and then I was given a router table so your idea is just the job to store some of my stuff and clear space for more stuff. Best Wishes, Brendan.
@CipsWoodChips
9 жыл бұрын
baconsoda Hello Brendan, I am trying to gather things closer to where I need and use them. This will help with the table saw. Take care
Wow, double deck storage no less! I f you want to see what I did to make a router table extension to my table saw, in the same place, read the current issue of Woodworker's Journal (January/February 2015).
@CipsWoodChips
9 жыл бұрын
Bill Wells I will be looking for that issue. Cheers
Not bad with your Cip. I had only done something different. The box I had strapped with clamps on the bench and then I would have bolted. as you would in fact have both hands free to carry the machine.
@CipsWoodChips
9 жыл бұрын
Günter Schöne Hallo Gunter! Thank you for watching. I should have practiced more.
I loved watching you build it but What point Did you notice that you had the one side board turned upside down? I noticed that you Did drill a new whole. Great videos...Lol.
@CipsWoodChips
9 жыл бұрын
Robert Dumesnil Haha! I was hoping no one would notice. I must have been looking at the half depth holes on the wrong side. I mounted the box and drilled a new hole. Thanks for watching.