You might credit John Heisz with this design a year earlier.

Excelente projeto é uma bela ferramenta parabéns, obrigado por compartilhar seus conhecimentos ...saudações aqui do brasil.

Obrigado por essa excelente ferramenta meu amigo por esse excelente trabalho que DEUS te abençoe e te guarde

Beautiful work I always enjoy your content it’s very relaxing to watch too

Это великолепно... Обязательно сделаю себе такие салазки 👍

It's nice to see a precise sled without the usual base plate supporting the workpiece. For small table saws, every mm of usable blade depth is valuable!

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

Excellent work, my friend. Really well done! 😊 Stay safe there with your family! 🖖😊

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir. Special thanks for your kind concern. Please stay safe with your family too.

Thank you for sharing this wonderful idea and excellent video. I admire your workmanship and presentation. I hope that you and your loved ones keep well in this current health crisis. Best wishes from Australia.

@j-woodworking9573

3 жыл бұрын

Thanks for your kindness. Please stay safe with your family sir.

@ahsapdunyasmustafabagc1634

3 жыл бұрын

👍

What an awesome job and a beautiful sled. The only thing I could say is (being a retired woodworker and professional table saw operator for over 40 years ) when cutting wood on a table saw use constant motion while pushing the wood piece past the saw blade. Been telling this to trainees for years. I noticed you scar the wood as you stop and it can be plainly seen on the wood pieces you cut. I only say this to make you a better woodworker and show the public an even better you. I intend to make one of these designs when I open my shop. It's a really good design. Thanks for sharing.

Show, show..., ficou excelente, belíssimo dispositivo, facilita e muito o dia dia no trabalho! PARABÉNS mesmo Abraço aqui do Brasil 🇧🇷

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@ahsapdunyasmustafabagc1634

3 жыл бұрын

👍

Show de bola companheiro!

ОТ ВЕЛИКОГО до простого- один шаг! Спасибо за идею! завтра с утра устремлюсь к станку! 😀👍КЛАСС!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

I really enjoy your projects and how you make your videos. Thanks for doing this.

VERY well done and great idea. Also great camera and editing. Thank you!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@ahsapdunyasmustafabagc1634

3 жыл бұрын

👍

Cool, this is a great tool for tech carpenter! Wood cutting work will be convenient and fast, highly accurate.

superbe réalisation. j'adore tes tutoriels, merci pour tous tes partages.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Excellent job! I'm going to do this myself.

Very well done. Great precision and craftmanship. I really liked the clamp you were using at the beginning. That looks very useful.

Grande precisione, grande maestria e soprattutto una esecuzione con grande eleganza. Claudio Lorusso

Great Woodworking Skills. Love Your Jigs

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

As always, well conceived, built and recorded. A jig well worth the time and effort to build. Cheers!

@josephlee1266

Жыл бұрын

C. ㅍ ㅎ ㅕ. 하지만

best cross cut sled on utube!!!

Congratulations from Brazil! Excellent idea! A very good tool!

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

excelente trabajo, saludos desde Tabasco, México

Parabéns pelo excelente projeto!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@ahsapdunyasmustafabagc1634

3 жыл бұрын

👍

Tout simplement : "MAGNIFIQUE"...

Perfect job. Thanks for sharing the video.

very nice...you are very good in woodworking ,I really enjoy watching your vedeos thank you and God Bless!!!

So clean, so precise, so smart.

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

Increible trabajo, valoro su creatividad, al principio no suponía utilidad y al final vi que es tremendamente útil, felicidades, su like y desde luego me suscribo, saludos desde el Puerto de Veracruz, México.

Another Basic Craftsmans Shop Project. Excellent 👍

@j-woodworking9573

3 жыл бұрын

Thanks again sir.

@ahsapdunyasmustafabagc1634

3 жыл бұрын

👍

Бриллиантовые руки золотая голова!

That was wonderfully satisfying

Beautiful, excelent job, congratulations.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@ahsapdunyasmustafabagc1634

3 жыл бұрын

👍

thank you very much for your creations they are very interesting and beautiful

Um projeto muito bem elaborado e feito com carinho e muita precisão. Uma ideia a ser adotada por quem padece com o excesso de peso de uma guia para realizar cortes em sua mesa de serra circular. Só reluto no emprego daquelas duas guias paralelas, de pinnus, pois sendo uma madeira macia, não demorará a sofrer desgaste dentro dos canais da mesa que o acomodam, caso o ritmo de trabalho seja intenso. Quanto ao resto, só elogios. Parabéns!

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

@moedjionojono5348

Жыл бұрын

Oktober pp oleh karena itu saya tidak 9

Спасибо ! Круто !

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Tão bem trabalhado, um excelente vídeo... Brasil, mais um inscrito 👍👍👍

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

@valteramador2501

2 жыл бұрын

Boa noite

@valteramador2501

2 жыл бұрын

Trabalho de mestre

Excelente trabajo. Es una idea fantastica Saludos desde Bolivia

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir. Greetings from Korea.

Muhteşem. Harika bir çalışma, ellerine sağlık. Türkiye den sevgiler.

Really, really nice!!! …… As usual !!!

Maravilhoso

Cómo puede ser?? Todos sus trabajos ,por muy pequeños o grandes que sean tienen un magnífico resultado final , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 😜🤓🤣

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@ahsapdunyasmustafabagc1634

3 жыл бұрын

👍👍👍

Excelente realmente es buen video gracias

I didnt understand how the scale would work... what was it registered to? Otherwise an excellent cross cut sled and on my to do list now :)

Beautiful work! Subscribed.

@j-woodworking9573

3 жыл бұрын

Thanks for watching and new subscription.

Ottimo lavoro e sicuramente molto pratica visto la manegevolezza. Saluti e complimenti

merci pour tous tes partages.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

It's funny I should see this today. I have been trying to come up in my mind a way to set the fence angle accurately without all the trial and error. My idea was to cut a 1" board on the right side using the miter slot and bouncing the square off it, LOL. The difference is that I plan to make a split sled where the left side or right side can be used independently or together as one sled. I see I saw this video in the past, so maybe that's where my mind picked it up. I have a lot of creative ideas, but I mostly get them from parts of many different sources over the years. I just sort them out to make one good idea from them. Thanks for the video. I needed this one today.

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

Hasil kreativ yang baik,,🙏👍❤️

Te felicito , con tu permiso me hare uno ogual , gracias por compartir

Perfect! I'm making it

Simple but very effective and we’ll layer out take care 😀👍

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@ahsapdunyasmustafabagc1634

3 жыл бұрын

👍

As with your tenoning jig I made for myself I will be making one of these as well. Nicely done sir!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Excellent sled, video and work. I'm confused about one thing, when you attached the rule tape to the top, why did you go with this positioning vice zeroing it at the blade?

Just a suggestion, wouldn't it be easier to glue up the two rabbeted boards then cut the bolt slot? I liked the method how you squared the unit to the blade. Excellent quality workmanship and attention to detail. The pointer is a nice touch. Thanks for sharing. Looking forward to your next video.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@Erik_The_Viking

3 жыл бұрын

You can also use a t-slot router bit which will cut the channel in one shot, so you don't have to perform multiple cuts. Those have saved a lot of time for me.

@206Seaman

3 жыл бұрын

Yes, if you have a router table and T-slot bit, not everyone does. What he shows you here is basically is how to build this without a router table so in essence he’s showing people two different ways simultaneously. (Assuming, like you, knowledge of what a T-slot bit does) I, too, admire is attention to detail and creativity. I only wish I had his patience instead of my usual practice of going a hundred miles an hour and trying to build everything in one day!

@BRUCELAN168

3 жыл бұрын

@@Erik_The_Viking I use table saw to cut a line first to remove some material for t-slot router bit go through easier.👍💪💖

@Erik_The_Viking

3 жыл бұрын

@@206Seaman I make t-slots without a router table as it's easier to use an edge guide for more control.

Very nice sled and excellent video. Well done.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Little..but ..special ! Like it ,Greetings again from us 🌷🌷🌷

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

Thank you !

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Parabéns pelo seu projeto ficou muito bom 🇧🇷🤝💯

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@ahsapdunyasmustafabagc1634

3 жыл бұрын

👍

Sensacional!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@ahsapdunyasmustafabagc1634

3 жыл бұрын

👍

E massa viu eu quero aprender a fazer.

Наверное, было-бы более технологично, если склеить две массивные детали и уже затем осуществить пропил зазора под болт. 1:15 А сама идея мне очень понравилась. Спасибо.

Hello nice job! Have you link of your powermatic saw ? I have gts 10xc, and can i know why you have changed ? Ty very much 👍

👍 классно!

Beautiful 👏

Complimenti bellissimo lavoro

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

Valeu meu amigo show de bola muito bacana o projeto do gabarito muito boa à demonstração

영상good~~~~

@j-woodworking9573

3 жыл бұрын

감사합니다.

@ahsapdunyasmustafabagc1634

3 жыл бұрын

👍

Excellent ! Good idea and a nice job ! 👌 👍 👍 Greetings from Austria 🙋‍♂️ Leo.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir. Greetings from Korea.

정말 멋진 지그입니다. 만들어서 사용해야겠습니다. 무슨 나무인지 궁금합니다. 고무 나무인가요?

@j-woodworking9573

3 жыл бұрын

저는 영상을 위해 고무나무를 썼지만, 변형이 있습니다. 합판 사용을 추천합니다. 변형이 적지요. 감사합니다.

Espero que se entienda lo que quiero decir...usted y muchos de ustedes hermanos del otro lado del mundo oriental poseen un nivel de alto desarrollo de los ingeniería aplicada, con un grado de simpleza y practicidad, una visión más amplia y un nivel de detalles sorprendente que no logro ver por este otro lado del mundo occidental. Siempre encuentro estas características al ver videos relacionados al bricolaje y creo que lo he comentado con otras personas y muchos dicen que son una raza superior y usted confirma lo que le comento. Si existiera la posibilidad de volver a nacer... desearía estar desde el otro lado para confirmar mi observación. Muy agradecido por su trabajo y experiencia saludos cordiales 🖐️ desde Chile 🇨🇱

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Отлично! Удачи!

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

прелестно. результат и сам процесс. почти медитация.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@ahsapdunyasmustafabagc1634

3 жыл бұрын

👍😀

Very nicely done. Clever design, nicely explained. Thumbs up to crush a troll.

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

perfect

Good job ! 👍🏼

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

Credit should go to John Heisz for his design.

Salah satu chanal favoritku. Bebeberapa Vidio aku dowload dan kali ini, saya mohon izin untuk mendowloanya

Muy bueno...!!!

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

😂😂😂😂😂😂😂😂😂 no tengo base metálica pero está muy buena la idea gracias

Show de ⚽!!!! 👏👏👏👏

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

Excelent!

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

Gostei. Vou fazer um deste pra substitui o meu, já muito estragado pelo uso.

Круто !

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

Excellent👏👏👍 Norbert ( France )

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

Excelent.

Интересно !

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

14:10 I wonder if those bolts provide enough thread engagement to hold the plastic :)

Спасибо,

Exellent, just a minor remark: I would have bought a measure from right to left, so it is easer to read from where you are standing.

Excelente.

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

Thanks for all your useful videos. Could you please write measures of parts?

Hi. Very interesting video. Malaysia going for lockdown again, begining 1st June to 14th June.

@j-woodworking9573

3 жыл бұрын

Sorry to hear that. Please stay safe and be healthy with your family. I hope everything will be OK as before. Thanks for watching sir.

@ahsapdunyasmustafabagc1634

3 жыл бұрын

👍

Çok iyisiniz eline emeğine sağlık kolaylıklar diliyorum selamlar

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

다른것을 계획하구 계시군요. 과연 다음에 어떤 작품이 나올지 궁금해 지내요...

@j-woodworking9573

3 жыл бұрын

당분간 제 공방에 필요한 지그들을 만들어볼 생각입니다.항상 고맙습니다.

@ahsapdunyasmustafabagc1634

3 жыл бұрын

👍👍👍

Интересно, даже тиски показал.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@ahsapdunyasmustafabagc1634

3 жыл бұрын

👍👍👍

WHAT AN AWESOME BUILD!! Something else I've been meaning to make for a while but, I'm glad I waited...you have given me some great ideas. I really like the RED LINE on the clear acrylic...I may use my own blood for that...

@j-woodworking9573

3 жыл бұрын

Sorry about my belated reply. I fell in love with my job. Very busy with thinking over and over about next videos and preparing parts which I'm not accustomed to. There are so many strange hardware, bits and parts. Those are what I break through. Thanks buddy.

@rolandgdean

3 жыл бұрын

No worries about the slower replies. As your channel grows, you'll have less time to reply to these things and maybe eventually not have time to reply to any of them at all. I can certainly see that you are very diligent to reply as much as you can and you have not missed one yet. Pretty amazing actually. I'm sure it will make your subscribers very loyal to you and your content.

@j-woodworking9573

3 жыл бұрын

We are recovering from the virus. The sun will shin brightly tomorrow as before. Take good care.

@ahsapdunyasmustafabagc1634

3 жыл бұрын

👍

Neat. Very useful.

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

muito bom mesmo pena que nao tem as medidas cos componentes sena eu poderia tentar fazer uma parecida