I absolutely appreciate that machine sounds are edited down. It's ear-jarring when you're listening to someone's video with earphones on and they suddenly switch on a planer, table saw or god forbid, a router.

@3x3CustomTamar

Жыл бұрын

Glad you appreciate it.

I can’t count how many time I have seen these techniques demonstrated on youtube, but you put them all together from start to finish articulated, by far, better anyone yet. Thank you.

@jerishull1860

3 жыл бұрын

Exactly!

@weltraumprasidentsuperstar5871

3 жыл бұрын

yes most videos are „let me tell you for 20 minutes how cool my jig is, also play Raid Shadow Legends“

@3x3CustomTamar

3 жыл бұрын

So awesome to hear! Glad it was useful!

@Lumbeelegend

3 жыл бұрын

This is what happens when you get a woman behind a saw... They explain things much better because they know that some people don't have a base of understanding to work from. But seriously, thank you so much. I got most of the information, but I was missing most of the theory behind the techniques. I've been following your channel for awhile now and this is usually the 1st place I go to understand something that I just can't grasp.

@jodilea144

2 жыл бұрын

I know this comment is almost a year old, but I completely agree. Thank you for taking the time to explain each step so thoroughly. I just subbed. 🙂

I've seen so many "joining without a joiner" videos. This one was easily the best. Most involved making a crazy rig which was more ambitious than the actual project. Thanks, keep up the good work 👍

I never really understood how to square a board until I watched this video. It`s all clear as a bell now. Thank you.

@3x3CustomTamar

2 жыл бұрын

Awesome

This is one of the absolute BEST explanations of milling and 'why' you do certain things to process rough lumber.

@3x3CustomTamar

3 жыл бұрын

So awesome to hear!

@jwong19

3 жыл бұрын

You really deserve it. It's awesome to watch your skills, knowledge, and easiness to teach others while doing each step. Again, I deeply appreciate the time you took to reply my comments. God bless you, your family as well and all those who share their comments as well.

@xppro2218

3 жыл бұрын

@@3x3CustomTamar 🍻 You should be speaker of the house 🏡 Q: what’s that about using odd number and odd number when you X them 9 You talk smooth and get to the point that you want us to “understand “ For me I think you are tough and sensitive,kind,caring,who likes to teach and get others that there is always there is a light and way to get the problem solve. Good for you learn a lot if I missed some point you explain it again in the different way of Wish you well

@everetthamilton337

3 жыл бұрын

@@3x3CustomTamar as a ticketed carpenter, I have to say this is the most clearly laid out explanation I've seen in person, or on video to explain these concepts. I'll be subscribing

@CC-io3nc

3 жыл бұрын

@@3x3CustomTamar unblock me on Instagram? 😏😉😘

Hello. I'm from Russia. I want to thank Tamar for the wonderful videos! Very interesting videos. I don't know English well, but I watch it with great pleasure. I wish America health, success in business and peace. With respect!

@3x3CustomTamar

3 жыл бұрын

Thanks! Glad you like them!

@dngriffiths8105

3 жыл бұрын

PARANOIDOR....And your English is just fine!

@paranoidor1429

3 жыл бұрын

@@dngriffiths8105 Thank you

@franklinvanduin8009

3 жыл бұрын

Watch and learn, is a good method.

@jimrambleson1493

3 жыл бұрын

May the Lord bless Russia. I have learned a little about your history, geography, culture and language. The people can get along well. It's the bankers that cause trouble. If you and I get along, there's not money to be made.

The best way to get around no jointer is - get good with hand planes - a good jointer and fore plane, well sharpened and set up can give you a flat face and edge to work from in very little time.

@tylerwinter512

15 күн бұрын

Do you use winding sticks for that process?

Absolutely legendary video I reference often.

I've seen these tricks a few times on other channels, but never have they been so clearly explained.

@3x3CustomTamar

3 жыл бұрын

So awesome to hear!

@dieterk9568

3 жыл бұрын

... and charmingly presented 🙂

Ok, I figured it out... I'm in England. What you call a planer, we call a thicknesser What you call a jointer, we call a planer. I've learnt to do simultaneous translation, and it all makes sense. Keep up the good work Tamar; I love the way there isn't a second wasted in your films, and the aesthetic of your furniture.

@3x3CustomTamar

3 жыл бұрын

Haha! Glad it all makes sense now 😂

EXCELLENT EXCELLENT video. I’m at best a couple of weekends a year warrior and your explanation and ability to communicate was perfect. Oh BTW, I was a Director of Communication for three global organizations and I wish people spoke as precisely and cogently as you. Kudos.

I just wanted to say thank you for dressing appropriate for the work you are doing. Many of the women on KZread doing woodworking dress to attract attention to their bodies. I appreciate that you use your chanle to teach about woodworking. Thank you!!!

@Bigsoot7393

2 ай бұрын

I second that! Instantly makes me click off their videos! But this one very informative

A sure sign of a competent woodworker is the ability to improvise, make jigs, and build one's own tools. You have the added skill of teaching these in a very approachable way. Thank you for creating such great content!

@3x3CustomTamar

3 жыл бұрын

☺️☺️ so glad you like it!

@annezimmerman4262

2 жыл бұрын

Totally agree, here!

@geoffreyopulski138

Жыл бұрын

competent wood worker if you only knew how dangerous what she is doing you'd never attempt it.

@jimstevetom

Жыл бұрын

@@geoffreyopulski138 Determining danger is a matter of knowledge, competence, awareness, and fear. If it's too dangerous for you, don't do it.

@geoffreyopulski138

Жыл бұрын

@@jimstevetom It's not aout me it's about all the begginners just learning starting to learn this trade.

STRONG video. So much useful information, and so much "why" instead of just "how." Definitely one of your best!

@3x3CustomTamar

3 жыл бұрын

So awesome to hear! Glad you liked it!

3 жыл бұрын

Absolutely agree with you, Vincent. I wish all woodworkers-youtubers would clarify why they are doing what they do the way they do. I am just a weekend woodworker, with just a few power tools, and this is the type of master class that really help me.

@guitarman_3693

3 жыл бұрын

thank you , teacher..!!!!!... btw , was that cypress ?

@3x3CustomTamar

3 жыл бұрын

@@guitarman_3693 nope! Ash

very nice explanation and clear demonstration. i like how you emphasized principles so the viewer can improve his understanding of why, which always leads to a better what. i have one small criticism, @ 17:15 we see a blade burn mark accompanied by your comment that a ripping blade would probably have avoided the burn mark. i dont think so. the reason for the burn mark was the feed stalled between your pushing the board with your right hand and switching to a push stick, also with your right hand. the thing that avoids marks is smooth, continuous feed with constant blade speed and a sharp blade. in this case i want something other than my left hand holding the board against the fence. that way i can start feeding with my left hand and switch to my right hand holding a push stick with almost no change in pressure/feed rate. so, you wanna prevent burn marks? use something to hold your work against the fence and free up both your hands to handle the feed more smoothly. if you have knots or other variations that could slow the blade, then you need to make two passes, the final pass being just a kerf or half-kerf at constant speed. you didnt need two passes on tis board, but you always need a constant feed rate to get a clean cut

Tamar, it's truly a pleasure to watch you explain and give us viewers of your channel a way to solve different problems. Thanks for sharing your innovative ideas.

EXCELLENT VIDEO!! I love how you explain everything leaving nothing to guess why or how. The quality of your videos just keep getting better and better!!! ❤️

@3x3CustomTamar

3 жыл бұрын

So awesome to hear! Glad you liked it!

@jerishull1860

3 жыл бұрын

This!!!

@YummyPork

3 жыл бұрын

I agree! Very thorough explanation of all the steps for the process (including jig building tips and alternatives where possible). It's like 5 videos in one.

Love it - that should be your motto "There's always a jig!"

I don't have a joiner or a planer. I have a router but not a router table. You can make a jig to flatten a board with the router. I think you mentioned that. I learned a few things from this video I didn't know before. Good job explaining how to do things. Thanks.

I really love your videos. You explain and teach so nicely, so I come away knowing what, how, why. Thank you 💐

I am now a student of the University of Tamar. You were born to teach.

@3x3CustomTamar

3 жыл бұрын

☺️☺️🤘

@ronaldomac4918

3 жыл бұрын

Well said and kudos to that...... she is legendary......!!

@jeffanderson8885

3 жыл бұрын

Most definitely born to teach. Phenomenal video. Thank you

@joshuabreeding4991

2 жыл бұрын

Couldn't agree more! I don't have the money for a jointer, but have so much rough wood! Now... I don't need one (yet).... Thank you so much for the detailed explanation. I can't wait to try it.

@JGerm

2 жыл бұрын

@@jeffanderson8885 agreed !

Always pushing and carrying so much "invisible" lumber when talking, this is some dedication to the craft X-D

@3x3CustomTamar

3 жыл бұрын

😂😂😂😂

Thanks for this info, nobody explained it better

Brilliant demonstration on how to create usable stock from unfinished !

Finally i’ve got this explained in a easy way. Thanks Tamar,

@3x3CustomTamar

3 жыл бұрын

Glad you found it useful!

@rayjr62

3 жыл бұрын

@@3x3CustomTamar ..."I had a board that used to be all twisted and wonky"....LOL. I can relate. I have known a few people who used to be all twisted and wonky, but I won't go there. ;-)

@3x3CustomTamar

3 жыл бұрын

@@rayjr62 😂

I'm no woodworking artisan - I live in an apartment very high in the sky, for one - but I watch your videos because you come across as the sweetest, kindest, most articulate talented person I could ever have to explain complex art-forms to me. Ever.🙏🙏❤️

Get a Jointer, I just did and it saves sooooo much time. Awesome vid, keep em coming. Brad

Great tutorial. Nice person. Nice style. Technically coherent. Terse. Intelligent. Effective. (Hated the "ad".) Loved her!

@3x3CustomTamar

2 жыл бұрын

Ha. Kids gotta eat…

There's a lot of KZreadrs out there that have videos on this subject but I have to say You are one of the best out there at not only sharing information but making it fun to watch. I'm not even sure why I clicked on this (ok I know because I'm a woodworking nerd) but you kept me entertained the entire length of the video. You are really good at describing the problem, presenting other possible problems then explaining your solution, why it works and why other solutions fail. And all with an upbeat sunny personality. If I came here not knowing any of this, I think I would have walked away with a wealth of new knowledge and, no matter what skill level, would understand all of it and be able to apply it to a project. I mean, nobody would mention things like shrinkage and why you milled it oversized but that's great information. Keep up the good work.

@3x3CustomTamar

3 жыл бұрын

So awesome to hear! Thanks!

I’m just a hobbyist with a few tools but I wanted to pick up a planer (or jointer) next and wasn’t sure how to proceed. Thanks for the information explained in a clear way for beginners.

@3x3CustomTamar

3 жыл бұрын

Awesome. Glad it helped!

@marcuslittle8049

3 жыл бұрын

Good advice Eric!

Finally, someone who explains how to plane warped boards so a rookie like me can understand it!!! Thanks!!!

@3x3CustomTamar

2 жыл бұрын

Glad it was helpful!

Just started looking at wood working. You must be very good at this. You have alot of watchers and followers

I've been working through a big stack of lumber from our family farm using the planar methods from this video. Thanks so much for making it!

explained very well, you are a good teacher, greetings from Germany

@3x3CustomTamar

3 жыл бұрын

Glad you think so! ☺️

@reid211

3 жыл бұрын

Yes! Yes, exactly! I have been watching other videos and they talk about squaring the board but never really describe the why they do the steps they show. It’s like light builds turning on all the time with her videos. Excellent job 3x3! I appreciate it!

@3x3CustomTamar

3 жыл бұрын

@@reid211 really so awesome to hear

@reid211

3 жыл бұрын

@@3x3CustomTamar I give credit where it's due, take a bow 3x3, You all ROCK!

@herrtonapparat6612

3 жыл бұрын

How thick should the MDF Base Plate be? Sorry i am also German WE need numbers. Thanks for teaching.

Madam, I always enjoy watching your videos here in Nagaland India🇮🇳 👌👍👍🙏🙏

What a wonderful demonstration of how to square up boards when not using a jointer with perfect clarity. Thank you so much.

This method WORKS!! Before I got my benchtop jointer I used this method with my thickness planer to get rough timber completely flat and square for glue-up and segment wood turning. Thanks for showing us how this works in this well explained common sense demo! 👍🏾

OMG! One of the best videos I've seen in months, especially since I purchased my planer and am still just a year in of woodworking. You added info that you didn't have to, yet I needed to hear it!! Thank you so much for advancing all of our woodworking knowledge. Keep em comin!!!

@3x3CustomTamar

3 жыл бұрын

Awesome

@jonhickman23

10 ай бұрын

@@3x3CustomTamar I have to say, I agree with beast, here. Most videos simply say "here's how!" and leave it at that. I LOVE the way you presented the content and gave explainations as to WHY it works, not just the mere fact that it works. You answered all my current questions in the best way possible AND you've earned a new subscriber tonight. Thank You!

Value of ‘stickering’ lumber after is flat & squared is often overlooked- but essential. VERY GOOD POINT. Thanx!

@3x3CustomTamar

Жыл бұрын

👍👍

You are the best woodworking teacher on youtube.

@3x3CustomTamar

Жыл бұрын

Wow, thank you!

Your explanations of all the steps are the best I’ve ever seen. I feel like I just learned more in this one video than all other woodworking videos I’ve seen combined! Thank you! Can’t wait to watch more of your videos!

@3x3CustomTamar

Жыл бұрын

Glad it was helpful!

Wow you’re a rock star. You explained this so much more thoroughly. As a dude you’re expected to know so much of this stuff so they just show don’t tell.

Dont forget the humble hand plane, its often quicker and easier to square small parts with a plane and straight edge, good video, great presenter.

I’ve watched 6 of your videos and I think I love you.

You're amazing. The video was pretty clear and I love how even though it's an intimidating process to beginners, you made it seem so easy to try. Thank you.

@3x3CustomTamar

2 жыл бұрын

Glad you liked it!

This was great! The most thorough, concise, and enjoyable video I've seen about this process

@3x3CustomTamar

3 жыл бұрын

So awesome to hear! Thanks!

This is why I like making cut outs of pumpkins and snowmen and things.

Love watching all your videos. It’s nice to see how to do so many different things and jugs to perform complex operations in a simple and easy way. THANK YOU TONY

@3x3CustomTamar

3 жыл бұрын

Thanks! Always more than one way to achieve the same goal 🤘

I am a little "elevated" at the moment, but i found this video probably one of the most important ones in my woodworking learning. I had a really hard time understanding how referencing off a guide once and creating "flat", without squaring it up. You explained it so well and i really appreciate it!

Tamar, the KZread algorithm brought this video to me today, and I'm so grateful! You are a terrific instructor! Your knowledge and experience show up as confidence and self-assurance, which are tempered by your humble desire to make these skills approachable to all. Your delivery removes the barriers so that viewers (me included) can see themselves moving forward on their own creative projects. I'm now a subscriber and look forward to seeing your other videos. Well done!

Love how in life there is "Always" another way to do anything!

Wow, that really blew my mind! Been looking all over to see how it gets done without a jointer and you even explained it so perfectly. Many thanks, Tamar. 💯

@3x3CustomTamar

3 жыл бұрын

Awesome to hear! Glad it was helpful!

You remember years ago when you said, "I'm a little afraid of working with power tools?" All these years later and you are MASTERING THEM! I'm so proud of you. Just one more project I have to see before I die. Fix the garage door handle.

@3x3CustomTamar

3 жыл бұрын

Ha. One day I’ll get around to it

İ love your videos. İ enjoy your videos all the way from Tūrkiye and learning a lot. İ especially appreciate the fact that you explain things like you explain to a 4 years old. Thank you! ❤

SWEET BABY JESUS ! THIS IS THE BEST EXPLANATION!! THANK YOU SO MUCH!

@3x3CustomTamar

2 жыл бұрын

Haha glad it was helpful!

Great video Tamar, I was woodworking for a long time before I learned the planner sled trick. A couple of tips, my planner pulls my board forward, so I always run the sled through with the end with the stop block first so it is pushing against the block. When you are looking to square the first edge of the board on the table saw, pay attention to the grain on the face of your board. You may have some sap wood that you would like to trim off or you may have straight grain (think quarter sawn or riff sawn) running down the board where you want to plan to keep the orientation straight instead of having it running off the side of the board at one time.

This is one of those great videos where you say "ahhh, now I get it”

@3x3CustomTamar

3 жыл бұрын

Awesome

if this video had any more details, it would be a book. Great work!

@3x3CustomTamar

2 жыл бұрын

😂 thanks!

Wonky…this is a technical term!!! Thanks for explaining the whole process so well. I’ll be rewatching your videos for the jig too

@3x3CustomTamar

Жыл бұрын

Yes. A very technical term. Ha.

You have quickly become one of my favorite woodworking channels. You have a wonderful skill and a great mind for problem solving. You are a blast to watch and so easy to learn from!

@3x3CustomTamar

3 жыл бұрын

Awesome to hear!

This is one of the clearest explanations I think I've ever heard. Thanks!

@3x3CustomTamar

3 жыл бұрын

Awesome to hear

i don't know much about woodworking, but you explain really well, things in perspective, and most important.. make people happy chasing to learn..

@3x3CustomTamar

Жыл бұрын

Awesome to hear!

Without a doubt, you are the best woodworking instructor I have ever listened to. I am 85 and have listened to quite a few of them over the years, starting with Norm in 1990 until today. Your instructions are complete with full explanations of why you do it that way, instead of just showing how to do it.

@3x3CustomTamar

2 жыл бұрын

Awesome to hear

@efrancis19

Жыл бұрын

Dale, I think the fact that you're an 85 year old man and willing to listen and learn from a young woman says a lot about your character. Much respect to you sir.

Parabéns pelas explicações. Sou brasileiro e sigo seu canal. Show

Thank you, Tamar!! I just bought that mac daddy Dewalt planer this past weekend and now I know how to get the most use out of it

@3x3CustomTamar

3 жыл бұрын

Yes!!! It’s going to change your life. Ha

My name is from jamaica ... love the way you articulate Yourself by demonstrating this video ... well done lady...

@3x3CustomTamar

2 жыл бұрын

Glad you like it!

Awesome! I am turned on to woodworking again. Thank you.

Thanks for explaining both the steps and how the tools actually work. Also, I’m a big fan of your editing style.

@3x3CustomTamar

3 жыл бұрын

Glad you like it all! Thanks!

@NothingOfficial668

3 жыл бұрын

@@3x3CustomTamar Do you do your own editing?

@3x3CustomTamar

3 жыл бұрын

@@NothingOfficial668 yup. I do it all

Out of many videos I’ve watched to try and get my head around squaring up pieces, this is easily the best! Great explanations - thanks.

@3x3CustomTamar

3 жыл бұрын

So awesome to hear!

3 times i have watched this, i sat through the entire process every time.

Great explanation! You explained it better than any other video I've watched. Great job!

@3x3CustomTamar

3 ай бұрын

Glad it was helpful!

This is amazing! I’ve taken a few woodworking classes using industrial quality machines, but seeing it done with the tools you have makes me want to get back into it, without investing in a huge workshop and tools Thank you!

@3x3CustomTamar

2 жыл бұрын

Awesome to hear! Go for it!

Brilliant tutorial with lots of great advice along the way. I'm just waiting on a Triton TPT125 that's coming today and this will really help when I come to mill my own pieces. Many thanks.

@3x3CustomTamar

3 жыл бұрын

Awesome!

I have to agree with a review I read from 3 years ago. I've watched several videos on planer/jointer differences, and while they made sense I still wasn't quite sure I was "getting it." This video explained everything in a manner I easily understood - plus it will save me from buying a jointer at this point. Well done, many thanks!!

@3x3CustomTamar

Ай бұрын

Awesome

FANTASTICALLY explained. Edit: Omg I love you. EVEN EXPLAINED HOW TO SQUARE IT ON A TABLE SAW!!!!! 17 videos later here I FINALLY understand it!

@3x3CustomTamar

2 жыл бұрын

Haha glad I was able to help!

She is really charming. Fantastic breakdown and explanation for this process from beginning to end. Well done.

Best explanation I have seen of this. It gave me several new ideas. Thank you. I will also add that, next to the tablesaw the jointer is probably the most dangerous tool in the shop. A co-worker recently cut finger tips off, will be needing surgery. All the methods you showed here are safer than that. I also hope that a Sawstop is in your future. With the amount of time you spend in the shop, the amount of work that you do on the tablesaw it would just make sense to protect your fingers and hands. Patreons maybe?

Hello Let me start by saying I owe you an apology regarding an earlier comment I left discarding the idea that one can flatten a board without using a jointer. Definitly I was wrong and you are correct. If one takes the time to follow your approch correctly, one can indeed flatten a board without using a jointer. Thank you for taking the time to post this informative video. ANJ

Thank you! Thank you! Thank you! There is a steel manufacturer down the road. When steel is brought in, it sits on a hard wood pallet. They just throw them away. I’ve been collecting some 2x4’s and 4x4’s. It’s all rough cut wood. I have a small 24x30 shop and didn’t want a jointer. Now I can mill the wood and build something beautiful…..

I’ve watched this multiple times, now put it to practice several times with my thickness planer and I’m so grateful for these tips!! Now watching again to see if there’s anything I’ve missed, and continue trying to master it!!

@3x3CustomTamar

Жыл бұрын

Awesome!

I’m really glad that you mentioned inner-moisture content and correcting for it. That’s a detail that I was unaware of… for longer than I like to admit. 😂 Really great videos! I get at least one great tip out of every one. Thank you! 😊

@3x3CustomTamar

2 жыл бұрын

Glad you liked it!

Your hubby a one lucky dude. 😊

Thank you! I was getting worried id have to buy an expensive jointer. You saved me

Tomorrow morning I'm picking up my very first planer, so I'm sort of binge watching videos about how to use a planer, and gotta say that this is the best one I've seen, so far. Thank you very much, greetings from Chile!

@3x3CustomTamar

3 жыл бұрын

So awesome to hear! It’s going to change your life

This is cool, love the tips. When I score myself a table saw, I need to make that tapering jig. I've been using my router and a bottom bearing bit to do basic joining but this seems easier

@3x3CustomTamar

3 жыл бұрын

Glad you like it! Yeah. Router works fine. But table saw is easier. Ha

@bandit2602

3 жыл бұрын

Google "makerspaces near me" - most have a woodshop

You’re an excellent teacher. This was a textbook example of every single skill we try to emulate in top tier universities teaching engineering. Hats off!

@3x3CustomTamar

4 ай бұрын

Glad it was helpful!

Might have commented already, but you are a wonderful teacher. Wife is going away for a few days, so I’m making a number of jigs.

God bless you girl! Like you, I'm in the North East. My shop is in a separate three car garage and since it's 17 degrees this morning it would take 6 or so hours to bring the temp up enough to be comfortable................so I'll watch you instead...LOL PS....Bundle UP!

@3x3CustomTamar

3 жыл бұрын

Haha yeah! It’s so hard to work out here! Do what you gotta do though...

@plssmellmycheese

3 жыл бұрын

I had a sneaky suspicion u were from the north east USA from a few words your accent really brings out, reminding me of Steven from the Arabella project... who I believe is from up there...loving their work too👍😃🇺🇸🥶❄️

@3x3CustomTamar

3 жыл бұрын

@@plssmellmycheese hah yup! It’s so cold today.....

@scottroy6195

3 жыл бұрын

@@3x3CustomTamar try living in Winnipeg. -14f right now. I'll stay by the fire today. 😀

@3x3CustomTamar

3 жыл бұрын

@@scottroy6195 was 20 today! I was inside by the fire as well ☺️

I just bought my first thickness planer, and am excited to put these lessons to use! Thank you for an awesome tutorial!

@3x3CustomTamar

3 жыл бұрын

Awesome! Have fun with it!

After all the years of watching youtube, this has to be the most useful one ive watched! Thankyou for explaining it so clearly

@3x3CustomTamar

9 ай бұрын

Glad it was helpful!

Damn. What a great video. Picked up my first planer today and you covered frikin everything. Thank you

Good tutorial! I think you and Stumpy Nubs have talked me into buying a planer before buying a jointer. (Don't have enough money for both right now.)

@3x3CustomTamar

3 жыл бұрын

Thanks! Yes! You can get by without a jointer. But a jointer is kinda useless without a planer.

@carasmussen27

3 жыл бұрын

same here. I love Stumpy Nubs too.

@davearonow65

3 жыл бұрын

Planer is WAY more useful around the shop for general overall use than a jointer, if you could only have one. I consider a planer an absolute necessity and a jointer more a luxury. Unless you are doing a lot of edge jointing for panel glue ups, etc you really can get by for the most part without a jointer especially when you consider their price.

Great video, Tamar. The new backdrop looks good. I'll bet it brightens up the shop a bit. Btw, I think you should get a heater before the jointer. ;)

@3x3CustomTamar

3 жыл бұрын

Haha yes. Heat is more important!

Love your smile while you are explaining. Keep doing it, please.

@3x3CustomTamar

3 жыл бұрын

☺️☺️

its heart warming, literally, to see a determined wood worker, videoing from a freezing shop with no lights. Dealing with shadows and frigid temperatures. Battling frostbite pedaling her ideas. Flash forward to today. New climate controlled shop with proper lighting and machinery to pedal her ideas. 2 short years from planet Hoth to to paradise. Heartwarming. Always excellent, well thought-out and incredibly useful tips and techniques. I thank you for your time.

@3x3CustomTamar

9 ай бұрын

So glad you see it this way. I am so happy I’m my climate controlled space.

This video is one of the best examples that money is no problem when you've got creativity and wit. Thank you so much for sharing, you're a true inspiration, Tamar! ♥

@3x3CustomTamar

2 жыл бұрын

Glad you like it 👍

The “weird edge”, is a waney edge. Meaning an adage cut too close to the bark and new growth, resulting in an uneven surface.

It seems to me you set this up to run the jig through backwards. The feed rollers will try to pull the wood forward on the jig not backwards. The block attached to your jig should be on the front not the back. Obviously it worked, but is technically backwards.

@behradgorgani

3 жыл бұрын

RexSeven not really, the jig is set up the right way. While the roller pull the wood through, the cutter head spins the opposite direction as the roller, the cutter head has much more force and power to kick the wood back. I would set it up exactly as she is describing in the video.

@3x3CustomTamar

3 жыл бұрын

Haha! This is one of the most common debates. To be honest. I have done both and see the merits of both. I think the hot glue is really doing most of the work though, so in my opinion, it actually really doesn’t matter....

@behradgorgani

3 жыл бұрын

@@3x3CustomTamar thank you for your great video Tamar.

@rexseven6907

3 жыл бұрын

@@behradgorgani I've seen wood go through slower than it should and I've seen it stop when rollers are damaged or dirty. I've never seen a board go backwards. Ideally, you would have a block front and back, but if I could only have one, I'd put it in front. You can put it wherever you want.

@1AnitrasDance

3 жыл бұрын

I tried the stop at the back but I had problems with the board sliding forward so I now have the stop at the front. I tried hot glue but the board moved anyway so I covered the top of the jig with rough sandpaper so the friction helps the board stay put. I also top the shims with a piece of rough sandpaper and everything stays in place.

Fantastic instruction. I have a table saw, sliding miter saw, and a small table mounted router. No jointer or planer. Planer is next. Thanks to you I will be able to joint rough wood.

@3x3CustomTamar

3 жыл бұрын

Awesome

Just got my first planer and this was super helpful! Your videos explaining things are some of my favourites. Thanks for taking the time to make this kind of content