Suzuki SV650 Rattle Noise Clutch Fault
Автокөліктер мен көлік құралдары
Suzuki SV650 Rattle Noise Clutch Fault
Special Tools I recommend
amzn.to/2SWOpEb pulley holder
amzn.to/3dDXytp slide hammer to remove the cover
amzn.to/3dMlEST digital torque wrench
Пікірлер: 102
I just bought a 2015 DL650 with only 1300 miles. A week later at 2100 miles I'm hearing the same noise your bike made. I was looking forward to a "trouble free" bike, but that's obviously not the case. I've read everything I could about "idle hammer" and was getting very discouraged. Hopefully my bike just needs the nut torqued down correctly also Thank you for posting this video. Even four years later it's continuing to help Suzuki owners.
@GicaPhp
Ай бұрын
I am happy it helps 😊
Excellent video. Great job communicating torque settings, rushing through the busy-work, etc. I didn't have to rewind once. Keen to see more like it, subscribed.
@GicaPhp
3 жыл бұрын
Glad you enjoyed it!
A very clear and professional video! I need to change my clutch on my 03 SV rather soon so this video has really helped demonstrate how to take everything apart properly and also what to look and check out for when I get in there 👀 Thanks again for this video and ride safe 😉
@GicaPhp
2 жыл бұрын
Glad it helped!
Finally found the answer to my questions :-) It's getting quite irritating while idling so at least I got something to do over winter months! Great video, many thanks!
@GicaPhp
Жыл бұрын
Glad to help!
this is what's happening to my xvs650 (dragstar/v-star), glad you posted this, it made it easy for me to identify the noise. thanks :)
@GicaPhp
4 ай бұрын
I'm happy to hear it helped
Great vid - couldn't be clearer! Thank you
@GicaPhp
3 жыл бұрын
Glad it helped!
Very well done video! If I'll ever hear this noise I now know where to look and how to fix it.
@GicaPhp
4 жыл бұрын
Thanks for watching and hopefully you'll never hear the noise!
@tracer1127
11 ай бұрын
I thought my clutch rattled a little but having heard yours I’m not concerned 😂
Hi ! Thanks a lot for your explanations. My V-strom had a lot of vibrations, and I was having issue with passing gears. Really helpful. Regards
@GicaPhp
7 ай бұрын
Glad it helped
Thank you. That was very helpful.
@GicaPhp
7 ай бұрын
Glad it was helpful!
Great job, good video. Thanks 👍
@GicaPhp
Жыл бұрын
Glad it helped
This is a well made video!
@GicaPhp
2 жыл бұрын
Thank You.
Superb video. Thank you. My dl 650 is so loud it's impossible to ignore any longer
@GicaPhp
2 жыл бұрын
Glad it helped, not get to work :D
@chriscs9080
2 жыл бұрын
Just put a Ducati sticker on it and will be fine 😜
Very helpful thanks.
@GicaPhp
3 жыл бұрын
Glad it was helpful!
Great video I have the same problem with a bike I'm working on very similar design it's a hyosung GT650R made by an old partner of Suzuki Inc back in the 90s
@GicaPhp
2 жыл бұрын
I hope it will help.
Really good video👍 I know this is old now, but think I have a similar problem on my honda cb650f. I get bad vibrations through the footpegs, tank, seat, everywhere when the clutch lever is fully out when cruising gently, it seems better when I put the power on. Recently I discovered that if I pull the clutch lever in just a little but still got full bite the vibration goes away. Your video has given me the confidence to have a look, really hoping it's just loose 🙏
@GicaPhp
Жыл бұрын
Could be, let me know what you find :) Enjoy
@alexinanalogue2645
11 ай бұрын
How did you go?
Harika video, teşekkürler kardeşim
@GicaPhp
3 жыл бұрын
You're welcome
you saved my life men that noise made me. razy i only found the solution here i did that problem fixed❤❤❤❤
@GicaPhp
10 ай бұрын
Glad I could help
Well, that's one way to fix that sound. I just straight piped my exhaust and never heard it again. 😉😆
@GicaPhp
3 жыл бұрын
Correct, less hassle :D
good video
@GicaPhp
2 жыл бұрын
Glad you enjoyed
Thank you. I was having this problem with my hayabusa
@GicaPhp
Жыл бұрын
Glad it helped
thanks for the video. i think that´s my problem aswell because im having same kind of noise when clutch is disengaged on my honda cbr 1000rr 2004
@GicaPhp
2 жыл бұрын
Glad it helped
What did you use to seal the cover with instead of replacing the gasket? Great video 👌
@GicaPhp
3 жыл бұрын
I have used a new gasket, just added a very thin layer of silicon used in automotive industries.
Nice torque
@GicaPhp
Жыл бұрын
Sure is :)
I have the same sound on my moped and i really hope this will fix it even thought i used torque wrench when i assembled last time😢
@GicaPhp
2 ай бұрын
good luck ;)
Great video man! Did you notice any strong vibration while driving around 6k rpm when the bolt was loose?
@GicaPhp
2 жыл бұрын
Not much
How did you use the slide hammer? I know my clutch cover (2003) is stuck so would be interested in knowing how you did that. (Hopefully the previous owner didn't use epoxy to seal it.) I noticed you removed all of the water pump fasteners and not just the top two. The bottom two just fasten to the clutch cover according to Haynes and the official manual.
@GicaPhp
3 жыл бұрын
I have build a L shape piece of 2mm sheet metal, attached it to my slide hammer and used it to grab on the little tabs on the case. I have not had a Haynes manual to see exactly which bolts exactly hold the clutch cover, I just took them all off, as I did not know how long they were. If you have an Haynes manual is great, just use the video and follow their steps and torque settings and you'll do a great job.
Is this video the sound when the clutch lever is pulled? Your video was informative.!
@GicaPhp
2 жыл бұрын
When the clutch is pulled, the noise disappears
Hola hermano podrías decirme que fue lo que le hiciste para quitarle el ruido?? Si cambiaste algo o solamente apretaste la tuerca
@GicaPhp
3 жыл бұрын
Hola, solo aprieto la tuerca.
Thank you brother. I bought second hand yamaha fz v2 and same noise is coming while i downshift and release clutch in 2nd gear mostly. Like "gad gad gad" giving heavy vibration that goes away when i give acceleration. I think it's the same issue. Or please let me know if you think something else causing this noise.
@GicaPhp
2 жыл бұрын
checke the movement on igntion on ;)
What is number in mm of the center nut that holds the basket? (The one that you use 50nm torgue)
@GicaPhp
3 жыл бұрын
24mm
Thank you so much. Does anyone know what the risks of this going untreated?
@GicaPhp
Жыл бұрын
In time will wear out between basket and shaft and cause further play between the shaft and basket until something will break. never left it too much to find out exactly what will happen.
mine sounds just like that its a cbr500 that i abused downshifting, was thinking to replace the outer gasket
@GicaPhp
3 жыл бұрын
It will be very similar.
Did the clutch disengage properly?
@GicaPhp
4 жыл бұрын
Yes, was working ok, just noisy.
Salut George, unde mesteresti la motociclete ca am si eu aceeasi problema la un V-strom 650/2005? As vrea sa o pui si pe a mea la punct.Multumesc.
@GicaPhp
2 жыл бұрын
Acasa, in Leeds cand am timp dupa munca. Acelasi zgomot de zdranganeala il ai si tu?
I hope mine doesn't blow up before my next bike. Though it makes that noise mostly when I lug the engine
@GicaPhp
2 жыл бұрын
I hope it will not blow :D
10 nm on irng clutch is 🫣 should be 5,5 nm both old and new version sv have 5,5 nm spring clutch torque ☝🏻 10 nm is for outside screw which go on cover cap 👌🏻 i today twist on screw in me sv spring clutch dont have dynamometer for such low value so im use for this kitchenscale and 23,5 cm froma xis to axis arm key so for generate 5,5 nm i need to use 2,4-2,5 kg on kitchen scale 2,5 x0,235 = 0,5875 x 9,81 = around 5,5 nm than at end i increase torq be hand be 10% around 😉., this central big screw which need 50 nm always get loose after time ,bending pad u der screw prevent be completely fly off and damage engine for made it no loose on longer time you need to put on it glue just like i 😎 just i put lil to less and it looose anyway next time must put more glue ☝🏻😉 alot 👌🏻
@GicaPhp
Жыл бұрын
Thanks for your input. ;)
when I start the my 2012 model m109r, the sound of rattling noise comes from the side of the clutch and as soon as you press the clutch lever, the sound stops what is the problem of the thing please help me
@GicaPhp
2 жыл бұрын
most like basket a bit loose
*I also own Gixxer- 155 in Nepal but the problem regarding my bike is when ever i gear shift on uphills it makes cranking sound and once the bike picks up acceleration the sound disappears again. Its so annoying to hear. Is there any solution to fix it? Thanks in advance.*
@JustSmoke.me_Ltd_UK_Wholesale
Жыл бұрын
I have the same problem...did this video fix your problem?
@GicaPhp
6 ай бұрын
Is the noise coming from engine or chain?
Does the motorcycle make noise when it warms up?
@GicaPhp
3 жыл бұрын
No, not anymore.
Can a low engine oil also cause that kind of noise ?
@GicaPhp
2 жыл бұрын
Not really
@ablegr
2 жыл бұрын
@@GicaPhp my mt125 has only ran about 8000 miles and is making this noise with the clutch, what could've caused this? What parts will I need to change to fix this ?
how many miles was the clutch? mine is 55000km and still sounds good
@GicaPhp
Жыл бұрын
78k miles on the bike
@farmoboy83
Жыл бұрын
@@GicaPhp ok thats high milleage and more thab reasonable to have some clutch work done
@GicaPhp
Жыл бұрын
@@farmoboy83 Indeed, but other than that, bike is still running smoothly
I have the exact same noise on my hyosung gt650 comet 2007.
@GicaPhp
3 жыл бұрын
Most likely the clutch basket, take the clucth cover off, and check it ;)
@thomase5943
3 жыл бұрын
@@GicaPhp Springs were rattling and the basket was loose. I bought a used one in much better shape. Runs much better now. Sounds similar to yours now.
@GicaPhp
3 жыл бұрын
@@thomase5943 good to hear it is all sorted.
Should use an accual gasket tho
Notice - plastic sprocket ! Why ?
@GicaPhp
3 жыл бұрын
Oil pump.
@laser5394
8 ай бұрын
@@GicaPhpI have some play in my oil pump sprocket, is that normal. The play is forward to backwards
@GicaPhp
8 ай бұрын
@laser5394 yes, there is play
One of the biggest issues of this engine.
@GicaPhp
Жыл бұрын
Indeed :)