3/8 rod and length is 6” 5/8

@riverviewestatecr

Жыл бұрын

BRILLIANT.

@Johnsack349

Жыл бұрын

How long did it take you to do all of it?

@Surron_Lort

Жыл бұрын

@@Johnsack349 I can do one in 10 minutes or less

@Johnsack349

Жыл бұрын

@@Surron_Lort I think I have to fix mine😭

@chris_8806

Жыл бұрын

god you are amazing. short, concise, and even pinned the question i was going to ask. you are a gentleman and a scholar sir!

Keep doing videos, you are really good at explaining

Literally the best video i can find on youtube showing this process, great work!

You can purchase a 3/8” bolt from any hardware store as well. Thanks for all the tips, it was a very smooth process.

Awesome video, super organized demo

Glad I got mine with the chain conversion

What a great time saver idea, thanks for making great video and not trying to be a comedian like the others.

@hollowedentity7097

2 ай бұрын

For real the second he out the bolt in (with ease) I was astonished.

Man that is so smart! Awesome!

Absolutely brilliant

Thanks for the great video you’re a lifesaver

Great video! Thank you

Thx dude, good job!

Great Video! Nothing like seeing a master of his craft in action. Makes me feel good to see even a professional sometimes hammers on a screwdriver as well!😂

@Surron_Lort

Жыл бұрын

Haha sometimes!! you mean everyday

good stuff, thanks for sharing.... what thickness is the rod?

Nice Job!

Love to see u using the cardboard that came with the surron as a Stand, gang shit. But fr, this shit so wobbly i think i need a stand at some point xD

I love the kickstand shoe....

All you have to do is loosen the motor mounts and frame mounts near the swingarm and it will open up slightly and you can easily slide the swingarm in place

@Surron_Lort

Жыл бұрын

Wasn’t that bad. I can do one in 10 minutes not filming

Nice ! Thank you !

Great video! I have done this on my motorcycle and it seems like it works great on your surron on as well! Where did you get your vans kickstand foot? That's cool!

I think I didn’t put but the swing arm washer that you mentioned around 5:45, how screwed am I?

You are killin me bro :D Where did you get this tiny shoe for your kickstand from and what size is it :D ?

I found this vid looking for info on tensioning the drive belt. I notice how dang easy you were able to get it and I don’t understand😂 my bikes been down for 2 years but I just got new forks so I can get it going again (also replaced the belt) and I cannot get the tension tight enough. Is it the peg brace that makes it so you can pry down on the motor?

One of the best hacks ever.

Hi, do you recommend anyone with a little bit of knowledge with old Motocross bikes to tackle this as my nephew's drive belt has just snapped & i like your video as you show everything that needs to be done. How tight to you recommend the belt to be fitted (roughly) please, any help would be appreciated, thank you 🙏🏻

After several belts you will know how to do it in 10 minutes without remouving swing arm, just remove the axle and motor pulley cover ;-). nice trick tho

@FreeMissions

Жыл бұрын

I don't see how that's possible. Make a video. Prove me wrong please

@Surron_Lort

9 ай бұрын

That won’t work unless I take out the peg brace.

Bro where u get the shoe for the kickstand I need me one 😂

Good morning what’s the belt size by chance?

You d best

my lever thing by my belt isnt clicking? why?

How do I know if my belt is too tight or too loose? Thanks for the video

@Surron_Lort

Жыл бұрын

You want just a little play. So if any debris get in it won’t snap it.

@Danielxperez14

Жыл бұрын

@@Surron_Lort like a chain almost? Thanks for responding 💯

I'm not knocking your method, I just wanna spread this idea across the surron community. What about ... Step 1. Taking off the chain. Step 2. Taking off the entire rear suspension. Step 3. Loosen the 4 motor bolts. Step 4. Taking the swing arm bolt out, and just lifting the jack shaft up and out keeping the swing arm still attached. Because every video I watched they all said putting the swing arm back on is the most difficult part. Placing the jack shaft back in with the swing arm still attached and reattaching the rear suspension then reversing the other steps seems like it would be easier. My belt comes today.

@Surron_Lort

9 ай бұрын

Depends where you have the peg brace. If you have the brace in the back like I do that method does not work.

Why do surrons have a belt and a chain?

Still way easier than replacing a whole gearbox 🙏

I would remove the power source from the bike when working on it.

@Surron_Lort

Жыл бұрын

Breaker is turned off but also good advice! 🤟

@FumblsTheSniper

Жыл бұрын

@@Surron_LortI would, because I’m an idiot.

How long does the belt last?

@Surron_Lort

Жыл бұрын

Depends on how you ride it honestly.

what’s the rod size?

@Surron_Lort

4 ай бұрын

3/8

no mobile1 grease on anything, interesting. This is why I don't buy anything used. People don't know how to properly maintain anything

@Surron_Lort

Жыл бұрын

You didn’t see any doesn’t mean I didn’t. I put so much grease on my belt.

@ericthedesigner

Жыл бұрын

@@Surron_Lort on the belt wtf? , talking about suspension shafts, pivot points and bearings. Sure you did guy.

@Surron_Lort

Жыл бұрын

@@ericthedesigner gotta grease the belt

@nigelm4273

Жыл бұрын

You bet grease the belt

@paz_e_amor_xo

Жыл бұрын

I'm trying to maintain my surron properly. Where should I be greasing?