wow 240p. is this from year 1998?

Anyone else get anxiety when he's taking this thing apart and not knowing how to put it all back together. Wish I could do all these upgrades easily

Thanks for the vid. Really wasn’t that hard 👍

How do you adjust the tension on the priamry belt!?

lol, you don't need to take the bashguard off, or take the rear wheel off either lmao. The easiest/fastest and most straight forward way to do this is, take the chain off, loosen the motor bolts, undo the rear brake caliper from the swing arm, undo the suspension bolt, take out the swing arm bolt and pull the swing arm off slightly, replace the belt, re-attach everything and add tension to the belt via the cam piece prior to re-tightening the motor bolts. Then lastly put the chain back on.

@1917VIL

Жыл бұрын

Can you produce a quick tutorial?

This music is something out of a fever dream

Where is the appropriate belt for this off road machine ? A centertrack or muddport belt kit is needed here, why is sur ron doing everything halfway ?

Need to know the name of the socket required for the main bolt removal.

@O6ADallday

3 жыл бұрын

Same, any info would be appreciated.... tried a 08-0015 oil filter & clutch hub spanner, but it was too big....

@Tonyplat98

3 жыл бұрын

You don't need that tool to take the castle nut off. Just use a flat head screwdriver and a hammer. Then you can replace that nut with a regular nut and you'll be able to use a regular socket after that.

Belt tension? see 4:56 to 5:02, sure would be nice if there was some actual specification on that! My new X Bike seems much tighter than that, in fact, it hurts my pinky finger if I use that to turn the back tire. Its that tight..seems too tight from the factory. I can feel some resistance from the belt when I first start to push the bile on a hard level floor.

@jerumd

3 жыл бұрын

@_ Pipeking Funny how western people say Chinese crap or cheap Chinese crap while companies from all over the world (including USA and especially Europe) are still dependent upon China's supply chain even after the global pandemic 😂 The company that i worked for label their products "Made in the USA." But in reality, internal parts are mostly made in China 😂How ironic is that??

@ufux4u

3 жыл бұрын

I used the conti professional calculator (www.conti-professional.com) to check the desired frequency the belt should swing when adjusted. Result is 255 to 290Hz.

@miguel360kmc

2 жыл бұрын

@@jerumd when did he say that? 🤔 Besides i always just say iPhone and ps1 to ps3 was made there

@lincolnsawyer5076

2 жыл бұрын

@@miguel360kmcI think he was replying to a deleted comment

What’s the special tool for the swing arm??????

@Tonyplat98

3 жыл бұрын

You don't need it. just use a flat head screwdriver and a hammer then replace that 4 notch castle nut with a regular nyloc nut.

If you want a 4 gears with a manual clutch that's full size electric dirt bike then EBeast is the one. We also have a 4 gears electric dirt with a manual clutch that's mid size similar to the ET Time Moto called the EFox! Seen on my Channel

@surronzak8154

2 жыл бұрын

We do not want gears nor full size bikes ;-p but a clutch would be cool

And I’m buying a talaria

I find the music to be energizing...😆😅

240p lmao