www.hunterworks.com/inc/sdeta... Installation of Hunterworks Round rollers in a Polaris secondary with square pucks
Жүктеу.....
Пікірлер: 72
@elcaminosunlimited Жыл бұрын
These rollers made such a HUGE improvement on my 21 xp1000. Smoother clutch engagement, snappier acceleration, no more back-shifting lag or belt slapping. Why Polaris doesn’t include these from the factory is beyond stupid. Worth every penny.
@Hunterworks
Жыл бұрын
Because they make too much money on selling you a new clutch when they wear out the secondary
@Lobosrun Жыл бұрын
Picked up a set of rollers last week for my 2017. Dealt with Larry and he was on the ball. Even though I called late in the day he managed to get them out the door that day. Only took two days to get them in my hands. Install was a snap, my secondary had very little wear, making things even easier. This video, and the others, sure helped ... thanks Todd.
@Hunterworks
Жыл бұрын
We have a newer video on this but thank you!!
@Tri-Lobe5 жыл бұрын
Thanks for the great videos on working on the secondary clutch. It took me less than 15 minutes to complete the upgrades to it. I was able to grab the exact tools and save time.
@roberthughes26873 жыл бұрын
The comments about the outside face x having zero to do with the x on the helix really saved me thank you!
@adamUDavies Жыл бұрын
The heat for removing the screws is a great tip. I will agree those rollers make a huge difference 👍
@Hunterworks
Жыл бұрын
Thanks
@visualadventures19983 жыл бұрын
I bought a 2016 Polaris 900 trail with 280 miles June 2021 I found a hunterworks and based on the recommendation I checked the clutch and ordered pucks. With only 600 miles on it I found significant wear just as Todd describes. Also installed the Hunterworks belt and immediately noticed a smoother performance no more jerky starts. I now trust him and his products! I'm a newbie and appreciate the help!
@Hunterworks
3 жыл бұрын
Thanks for your comments and glad you are happy
@burtonfordsr94795 жыл бұрын
Burton Ford sorry about the previous post. I installed the rollers in the secondary and ir really made a difference also installed a Hunterworks belt on a 2016 900 S Thanks Todd
@rickhouk83453 жыл бұрын
Great Videos and Awesome Service. These guys really dial the information down so a first timer can get it. I appreciate the emails Todd. Buy from this guy.
@Hunterworks
3 жыл бұрын
Thank you
@theskiviking9007 Жыл бұрын
I really loved your performance in the Men in Black movies!
@Hunterworks
Жыл бұрын
Assuming you meaning one of the aliens
@bq6162
Жыл бұрын
This comment deserves more likes. Tommy vibes!
@theskiviking9007
Жыл бұрын
@@Hunterworks Ha!
@keithcastleberry39935 жыл бұрын
Excellent!! Thank you!!
@ChrisGapske Жыл бұрын
Thank you for the hard work.
@Hunterworks
Жыл бұрын
You are welcome
@birdinwithblue5 жыл бұрын
got mine in the mail today and already installed them . much tighter and took some slop out of the clutch . thanks
@Hunterworks
5 жыл бұрын
Good deal and thanks!!!
@hillbillyhangover Жыл бұрын
Great vid!!! Thanks!!!
@whitenas4 жыл бұрын
Great helpful video thank you. Can you tell me what would cause secondary to wobble . Input shaft on trans is straight and turns true. Bike is 2013 sportsman 850 xp. Thank you
@Hunterworks
4 жыл бұрын
Then sounds like the secondary itself is bent, how I have no idea
@fakero7775 жыл бұрын
I like very much your videos. Kindly question: 2016 rzr turbo secondary clutch will fit to non turbo 2014 rzr 1000? I'm wondering about shaft mounts and alignment - plastic cover its not a problem.
@Hunterworks
5 жыл бұрын
It wont fit
@fakero777
5 жыл бұрын
@@Hunterworks Many thanks.
@mckrackin53245 жыл бұрын
I just took my cover off to inspect and my rollers are totally shot (flat spotted almost all the way through). I'm ordering new parts from your site. I want to ask though... can worn rollers make the clutch noisy under power? Mine seems to rattle at high RPM. I may just order the complete secondary clutch. Can I get the complete secondary for my 2016 XP 1000?
@Hunterworks
5 жыл бұрын
Yes they can make the noise but most times that is the primary. You can't order a complete secondary helix and all from our site, only 17 model. The helix is the same 17- 19 so you would use yours if you wanted or a get a clutch kit which has it.
@dutchb68635 жыл бұрын
I have a 2018 XP 1000 with about 65 hrs on it would now be a good time to change these rollers? Thanks for the video 👍
@Hunterworks
5 жыл бұрын
Day one was the best time
@LIGMAFB3 жыл бұрын
Do rollers assistance in smoother engagement? What else do you recommend for a 2021 RZR XP1000 4 seater?
@Hunterworks
3 жыл бұрын
They do not, but do these for sure. There is another video on our channel about jerky starts
@klang355 жыл бұрын
The dealer I bought my 19 from claims that Polaris addressed the rollers, can you confirm please?
@Hunterworks
5 жыл бұрын
Yes I canconfirm your dealer don't know crap, LOL . 19 model non turbo still have square pucks
@jerrythibault8374 жыл бұрын
my 09 rzr 800 grinds when shifting. I aligned the belt and replaced the primary clutch bearing. the belt is centered on the primary but the sheaves still contact the sides of the belt so the secondary clutch is turning even at idle. Whats wrong
@Hunterworks
4 жыл бұрын
If both sides are touching then something keeping the clutch from opening all the way, I can't tell you specifically what is causing that, dirty or bad rollers maybe
@tylerwilliams76183 жыл бұрын
I have a 2019 rzr 1000 s 4 seater it have a clutch upgrade and a tune in the pass ive have it up to 90 plus mph with plenty more to go now im bouncing of the rev limiter at 65 could this be cause of the square pucks in the secondary?? I dont think they shop changes the secondary just the primarily clutch thanks
@Hunterworks
3 жыл бұрын
no, most likely something wrong in the primary clutch
@stevenking68223 жыл бұрын
I have a 2014 rzr 800s I'm on my 3rd belt in a year I've changed the primary clutch but it still has a roaring sound when I drive it what could this sound be and the cause of so many belt breaks
@Hunterworks
3 жыл бұрын
Can't answer that one, are you using Polaris brand primary clutches?
@shawnreppert14934 жыл бұрын
I had mine apart and the outer edge where the belt rises at low rpm I believe is oxidized and pitted should I be worried?
@Hunterworks
4 жыл бұрын
Shawn Reppert is need to see it send email todd@hunterworks.com
@shawnreppert1493
4 жыл бұрын
Hunterworks Inc. will do, thank you and your channel has been very helpful...
@howardmiller42412 жыл бұрын
I have a question I have a 2020 rzr 900s and it has a jerky start what causes that and how can I fix that ?
@cody4089
Жыл бұрын
I’m sure you figured it out by now. Sounds like a worn out belt though
@alexjrful3 жыл бұрын
I want to up grade my 2017 rzr 1000 none turbo with 32” tires what clutch kit would I need ?
@Hunterworks
3 жыл бұрын
You didn't say 2 or 4 seat but the Dalton kits we have on www.hunterworks.com You can also email me for advice on it, todd@hunterworks.com I will answer monday
@alexjrful
3 жыл бұрын
K thank u. 👍
@twocompassheads2 жыл бұрын
Is the rod on the puller or press a 1/2 inch or a 3/8 inch all thread? I wish you audio was better or your voice louder, had to turn up volume all the way and your still hard to hear and understand you.
@Hunterworks
2 жыл бұрын
Old video, all new area and equipment since then. The rod is closer to 10mm, small enough to get through the hole of the newer clutches.
@ericchrestman11274 жыл бұрын
My 17 xp is screaming in the secondary, been told it needs a new helix, been told I need new rollers.....what do you think??
@Hunterworks
4 жыл бұрын
Neither are it, there are more videos on this site telling you what iti s but not a easy fix always. email me todd@hunterworks.com
@ericchrestman1127
4 жыл бұрын
Hunterworks Inc. it’s a high speed squeal, goes away with power or when I let out of it......but when driving regular speed it really squeals like a trump hater.....
@cameronlutz3345
3 жыл бұрын
I have this same issue
@ICU-th7qj Жыл бұрын
What would cause your rollers to be getting cut? The one side is being grooved bad.
@Hunterworks
Жыл бұрын
Woukd have to see it but not smoothing out groove before install.
@ICU-th7qj
Жыл бұрын
@@Hunterworks I changed them out well before any grooves started from the square pucks. I can email a pic
@Hunterworks
Жыл бұрын
@@ICU-th7qj do that
@wrenchology922 Жыл бұрын
What's are the symptoms of flat spotted rollers? Found flats spots on a 900 I'm working on currently
@Hunterworks
Жыл бұрын
Could blow belts due to not opening and closing fast enough and belt go slack on decel and hit cover and or exhaust duct. What exact 900 is this?
@wrenchology922
Жыл бұрын
@@Hunterworks hey Todd we spoke long ago while I was setting up my first RZR 800. I am currently overhauling a 900 trail and converting it to an S model. I it's a 2015-2016 I was about to order the rollers but I need to confirm the build date first
@Hunterworks
Жыл бұрын
@@wrenchology922 no you just need to send a pic of your secondary to me todd@hunterworks.com The 15 model we have rollers for is the 15 trail with power steering, it has the EBS secondary so it gets our 08-15 rollers. if it has the other secondary, best to get the better EBS style from us
@wrenchology922
Жыл бұрын
@@Hunterworks pic coming shortly
@kungfucommando16423 жыл бұрын
Does my 2020 RS1 have the new rollers?
@Hunterworks
3 жыл бұрын
Has no rollers, has a turbo RZR clutch
@kungfucommando1642
3 жыл бұрын
@@Hunterworks thank you for the response. I am brand-new to sxs and CVT’s, coming from dirt bikes. It’s taking some getting used to. One thing I’m concerned about is the turbos are being recalled for their clutches exploding. Mine has the turbo clutch, but isn’t under recall. Same parts, but not recalled? Wondering how concerned I should be.
@Hunterworks
3 жыл бұрын
@@kungfucommando1642 you do not have the pro turbo clutch like the Pro does or all 21 model turbos do
@burtonfordsr94795 жыл бұрын
Burton Ford
@loglanding51825 жыл бұрын
So I have purchased stuff from you Todd. Why the flop to Polaris? Yamaha to dependable to make a living. 😂. Your swap to selling Polaris parts must be setting you up for retirement
@Hunterworks
5 жыл бұрын
We still sell yamaha parts, same ones as always and fixing to release the X2 clutching, Polaris is just the #1 selling UTV and you have to make and sell parts for it to survive
Пікірлер: 72
These rollers made such a HUGE improvement on my 21 xp1000. Smoother clutch engagement, snappier acceleration, no more back-shifting lag or belt slapping. Why Polaris doesn’t include these from the factory is beyond stupid. Worth every penny.
@Hunterworks
Жыл бұрын
Because they make too much money on selling you a new clutch when they wear out the secondary
Picked up a set of rollers last week for my 2017. Dealt with Larry and he was on the ball. Even though I called late in the day he managed to get them out the door that day. Only took two days to get them in my hands. Install was a snap, my secondary had very little wear, making things even easier. This video, and the others, sure helped ... thanks Todd.
@Hunterworks
Жыл бұрын
We have a newer video on this but thank you!!
Thanks for the great videos on working on the secondary clutch. It took me less than 15 minutes to complete the upgrades to it. I was able to grab the exact tools and save time.
The comments about the outside face x having zero to do with the x on the helix really saved me thank you!
The heat for removing the screws is a great tip. I will agree those rollers make a huge difference 👍
@Hunterworks
Жыл бұрын
Thanks
I bought a 2016 Polaris 900 trail with 280 miles June 2021 I found a hunterworks and based on the recommendation I checked the clutch and ordered pucks. With only 600 miles on it I found significant wear just as Todd describes. Also installed the Hunterworks belt and immediately noticed a smoother performance no more jerky starts. I now trust him and his products! I'm a newbie and appreciate the help!
@Hunterworks
3 жыл бұрын
Thanks for your comments and glad you are happy
Burton Ford sorry about the previous post. I installed the rollers in the secondary and ir really made a difference also installed a Hunterworks belt on a 2016 900 S Thanks Todd
Great Videos and Awesome Service. These guys really dial the information down so a first timer can get it. I appreciate the emails Todd. Buy from this guy.
@Hunterworks
3 жыл бұрын
Thank you
I really loved your performance in the Men in Black movies!
@Hunterworks
Жыл бұрын
Assuming you meaning one of the aliens
@bq6162
Жыл бұрын
This comment deserves more likes. Tommy vibes!
@theskiviking9007
Жыл бұрын
@@Hunterworks Ha!
Excellent!! Thank you!!
Thank you for the hard work.
@Hunterworks
Жыл бұрын
You are welcome
got mine in the mail today and already installed them . much tighter and took some slop out of the clutch . thanks
@Hunterworks
5 жыл бұрын
Good deal and thanks!!!
Great vid!!! Thanks!!!
Great helpful video thank you. Can you tell me what would cause secondary to wobble . Input shaft on trans is straight and turns true. Bike is 2013 sportsman 850 xp. Thank you
@Hunterworks
4 жыл бұрын
Then sounds like the secondary itself is bent, how I have no idea
I like very much your videos. Kindly question: 2016 rzr turbo secondary clutch will fit to non turbo 2014 rzr 1000? I'm wondering about shaft mounts and alignment - plastic cover its not a problem.
@Hunterworks
5 жыл бұрын
It wont fit
@fakero777
5 жыл бұрын
@@Hunterworks Many thanks.
I just took my cover off to inspect and my rollers are totally shot (flat spotted almost all the way through). I'm ordering new parts from your site. I want to ask though... can worn rollers make the clutch noisy under power? Mine seems to rattle at high RPM. I may just order the complete secondary clutch. Can I get the complete secondary for my 2016 XP 1000?
@Hunterworks
5 жыл бұрын
Yes they can make the noise but most times that is the primary. You can't order a complete secondary helix and all from our site, only 17 model. The helix is the same 17- 19 so you would use yours if you wanted or a get a clutch kit which has it.
I have a 2018 XP 1000 with about 65 hrs on it would now be a good time to change these rollers? Thanks for the video 👍
@Hunterworks
5 жыл бұрын
Day one was the best time
Do rollers assistance in smoother engagement? What else do you recommend for a 2021 RZR XP1000 4 seater?
@Hunterworks
3 жыл бұрын
They do not, but do these for sure. There is another video on our channel about jerky starts
The dealer I bought my 19 from claims that Polaris addressed the rollers, can you confirm please?
@Hunterworks
5 жыл бұрын
Yes I canconfirm your dealer don't know crap, LOL . 19 model non turbo still have square pucks
my 09 rzr 800 grinds when shifting. I aligned the belt and replaced the primary clutch bearing. the belt is centered on the primary but the sheaves still contact the sides of the belt so the secondary clutch is turning even at idle. Whats wrong
@Hunterworks
4 жыл бұрын
If both sides are touching then something keeping the clutch from opening all the way, I can't tell you specifically what is causing that, dirty or bad rollers maybe
I have a 2019 rzr 1000 s 4 seater it have a clutch upgrade and a tune in the pass ive have it up to 90 plus mph with plenty more to go now im bouncing of the rev limiter at 65 could this be cause of the square pucks in the secondary?? I dont think they shop changes the secondary just the primarily clutch thanks
@Hunterworks
3 жыл бұрын
no, most likely something wrong in the primary clutch
I have a 2014 rzr 800s I'm on my 3rd belt in a year I've changed the primary clutch but it still has a roaring sound when I drive it what could this sound be and the cause of so many belt breaks
@Hunterworks
3 жыл бұрын
Can't answer that one, are you using Polaris brand primary clutches?
I had mine apart and the outer edge where the belt rises at low rpm I believe is oxidized and pitted should I be worried?
@Hunterworks
4 жыл бұрын
Shawn Reppert is need to see it send email todd@hunterworks.com
@shawnreppert1493
4 жыл бұрын
Hunterworks Inc. will do, thank you and your channel has been very helpful...
I have a question I have a 2020 rzr 900s and it has a jerky start what causes that and how can I fix that ?
@cody4089
Жыл бұрын
I’m sure you figured it out by now. Sounds like a worn out belt though
I want to up grade my 2017 rzr 1000 none turbo with 32” tires what clutch kit would I need ?
@Hunterworks
3 жыл бұрын
You didn't say 2 or 4 seat but the Dalton kits we have on www.hunterworks.com You can also email me for advice on it, todd@hunterworks.com I will answer monday
@alexjrful
3 жыл бұрын
K thank u. 👍
Is the rod on the puller or press a 1/2 inch or a 3/8 inch all thread? I wish you audio was better or your voice louder, had to turn up volume all the way and your still hard to hear and understand you.
@Hunterworks
2 жыл бұрын
Old video, all new area and equipment since then. The rod is closer to 10mm, small enough to get through the hole of the newer clutches.
My 17 xp is screaming in the secondary, been told it needs a new helix, been told I need new rollers.....what do you think??
@Hunterworks
4 жыл бұрын
Neither are it, there are more videos on this site telling you what iti s but not a easy fix always. email me todd@hunterworks.com
@ericchrestman1127
4 жыл бұрын
Hunterworks Inc. it’s a high speed squeal, goes away with power or when I let out of it......but when driving regular speed it really squeals like a trump hater.....
@cameronlutz3345
3 жыл бұрын
I have this same issue
What would cause your rollers to be getting cut? The one side is being grooved bad.
@Hunterworks
Жыл бұрын
Woukd have to see it but not smoothing out groove before install.
@ICU-th7qj
Жыл бұрын
@@Hunterworks I changed them out well before any grooves started from the square pucks. I can email a pic
@Hunterworks
Жыл бұрын
@@ICU-th7qj do that
What's are the symptoms of flat spotted rollers? Found flats spots on a 900 I'm working on currently
@Hunterworks
Жыл бұрын
Could blow belts due to not opening and closing fast enough and belt go slack on decel and hit cover and or exhaust duct. What exact 900 is this?
@wrenchology922
Жыл бұрын
@@Hunterworks hey Todd we spoke long ago while I was setting up my first RZR 800. I am currently overhauling a 900 trail and converting it to an S model. I it's a 2015-2016 I was about to order the rollers but I need to confirm the build date first
@Hunterworks
Жыл бұрын
@@wrenchology922 no you just need to send a pic of your secondary to me todd@hunterworks.com The 15 model we have rollers for is the 15 trail with power steering, it has the EBS secondary so it gets our 08-15 rollers. if it has the other secondary, best to get the better EBS style from us
@wrenchology922
Жыл бұрын
@@Hunterworks pic coming shortly
Does my 2020 RS1 have the new rollers?
@Hunterworks
3 жыл бұрын
Has no rollers, has a turbo RZR clutch
@kungfucommando1642
3 жыл бұрын
@@Hunterworks thank you for the response. I am brand-new to sxs and CVT’s, coming from dirt bikes. It’s taking some getting used to. One thing I’m concerned about is the turbos are being recalled for their clutches exploding. Mine has the turbo clutch, but isn’t under recall. Same parts, but not recalled? Wondering how concerned I should be.
@Hunterworks
3 жыл бұрын
@@kungfucommando1642 you do not have the pro turbo clutch like the Pro does or all 21 model turbos do
Burton Ford
So I have purchased stuff from you Todd. Why the flop to Polaris? Yamaha to dependable to make a living. 😂. Your swap to selling Polaris parts must be setting you up for retirement
@Hunterworks
5 жыл бұрын
We still sell yamaha parts, same ones as always and fixing to release the X2 clutching, Polaris is just the #1 selling UTV and you have to make and sell parts for it to survive