There have been many comments about the horn ring needing to be re-chromed. UPDATE! The horn ring has been re-chromed and an image has been posted here: www.polyvance.com/images_old/SteeringWheelReChromed.jpg

@clearedhot6146

2 жыл бұрын

How much to do mine?

I used JB Weld as my filler. Also, I opened the cracks a little to get the filler in place and to help it grip. That was a ot 12 years ago. It's doing great.

@martinharris5017

Жыл бұрын

JB Weld has almost limitless uses. I actually just fixed a steering wheel with body filler (sparing use of hardener) and then coated the wheel with polyester resin and pigment.

@4spdragtop

6 күн бұрын

I was wondering about using JB. I've used it on old plastic grille pieces before with good success. There's a LOT of different JB epoxies out there to choose from.

Very well edited. Great job overall.

I've always considered repairing a steering wheel like this, and then finally undertook the endeavor. I was able to come out with a beautiful steering wheel. However, I am right back to where I started five years ago. The problem is that the original plastic will continue to crack in new places despite all you've done, ruining all of that exceptionally hard work. There are a few wheel restoration specialists that use injection molding to remake these vintage wheels using a much more durable plastic. I think that is really the only permanent solution.

@juggnautbitch

9 ай бұрын

it helps to heat gun the steering wheel first to anneal the plastic and release built up stress. This will cause a crap load of cracks as the stress is released but afterwards it shouldn't happen again.

Fantastic job that took far more patience than I would have, and I can't believe that there are those who don't see this as a complete restoration. the only step further that I can think of is re-manufacture. top marks to all concerned.

@polyvance

2 жыл бұрын

Thank you!

THE BEST instructional video ever made!! Hands down.

@polyvance

2 жыл бұрын

Wow, thanks!

Exceptional instruction. Easy to understand. Ready to try it myself now.

@polyvance

4 жыл бұрын

Great!

Ready to make people happy for another 60 years! Fantastic prep and end result.

@polyvance

3 жыл бұрын

Thanks for watching!

Whitout a doubt a perfect video for pro ppl! Also convening the other ppl to look for a repair shop.

Excellent repair. Step by step guide. Old skool style. Great job.

@polyvance

4 жыл бұрын

Thank you for watching, and thank you for the compliment. Compliments on KZread are rare.

Looks great, need to do my 60 wheel, now I know how. Thanks again Gary O

Great instructional VDO, I like it when he sped up, save so much time.

@polyvance

4 жыл бұрын

Thanks for watching!

Very nice! Thanks for putting this out there! Very helpful!

@polyvance

3 жыл бұрын

Thanks for watching!

Perty cool like having a brand new one. Thanks for sharing.

@polyvance

4 жыл бұрын

Thanks for watching!

Very dedicated thorough job. I would have said good enough a long time before you finally were satisfied

@polyvance

4 жыл бұрын

Thank you!

Absolutely excellent, informative, clear detail instructions, great photography, very helpful. I have a 1965 Ford Mustang and a 1968 Oldsmobile Toronado with the original black steering wheel. Looking forward to performing this repair. Much appreciate your efforts in producing this educational video. 🏎🚙👍🏻😉🙏🏻🇺🇸🙏🏻🇺🇸🙏🏻🇺🇸

@polyvance

2 жыл бұрын

Thanks for watching!

That's a really nice job ! Even nicer with the new chromed horn ring !

@polyvance

8 ай бұрын

Thank you!

Awesome work, thank you for the video.

@polyvance

7 ай бұрын

Thanks for watching!

Tip: when mixing small amounts of paint. weight the liquid to the correct ratios and you'll have more accurate mixes. buy a small digital scale. Depending on lines on a plastic cup with small amounts is inconsistent, especially if you have to mix extra.

that looks really good thanks for making this video

@polyvance

4 жыл бұрын

Thank you!

Beautiful job

@polyvance

4 жыл бұрын

Thanks for watching!

Terrific job! Would love to see more of that Newport.

@polyvance

4 жыл бұрын

I'll post them on a separate channel. I did this video for Polyvance since I work there and used their products.

Now you need to re-chrome that horn and center cap! then she'll look totally all brand new, but the steering wheel does look great.

@polyvance

3 жыл бұрын

Thanks! The owner did have everything re-chromed after making the video.

Amazing improvements in technique. I had a 57 Corvette and original steering wheel with cracks was preferred to aftermarket or poor fixes of the time. That plastic covers a metal rim underneath.

Awesome informational educational video experience Y'alls

You made it look easy.

Great instructions and demonstrations! new sub indeed! Thanks

@polyvance

3 жыл бұрын

Thanks for watching!

Good choice of vehicle!

Great Job !!

@polyvance

4 жыл бұрын

Thanks for watching!

Realy exlent a real professional job.. it was very helpful for me Many thanks

@polyvance

4 жыл бұрын

Thanks for watching!

great job thanks.

@polyvance

3 жыл бұрын

Thanks for watching!

Pain staking but well worth it awsome job

@polyvance

3 жыл бұрын

Thanks for watching!

learned a lot thanks. ready to tackle my old dodge now

@polyvance

3 жыл бұрын

Thanks for watching! And good luck!

Very nice video. Thorough and clear. Even I can do it.

@polyvance

3 жыл бұрын

Thanks for watching!

I restored my '64 bug steering wheel with JB weld. Works!

nicely done

@polyvance

4 жыл бұрын

Thank you!

Always wondered about this, now I know

great job!

@polyvance

3 жыл бұрын

Thank you!

With all the plastic on cars today this product should be more than successful..... nice resto.🤠👍

@polyvance

4 жыл бұрын

Thank you! You're right, there are lots of different plastics on cars! PlastiFix works on rigid plastics like ABS, PC, ASA, and PVC. For other plastics like PP and PE, we recommend fusion welding. We make top quality nitrogen plastic welders as well as many airless plastic welder kits. Not to mention the 20 different welding rod materials we carry!

Brilliant job on restoring the steering wheel, only to have it over shadowed by the crappy horn ring.

@polyvance

4 жыл бұрын

The owner of the car had everything re-chromed after making this video. Hopefully we can post an update on the car soon!

Nice job,

@polyvance

4 жыл бұрын

Thank you!

One word... WOW

@polyvance

4 жыл бұрын

Thanks for watching!

Well done!!........ Always, any miss steps in the preparation, shows in the finished product!!......... 👍.

@polyvance

4 жыл бұрын

Thanks for watching.

Finally smart person knows the terminology and chemical

@polyvance

4 жыл бұрын

Thank you! Our company has been focused on plastic repair since 1981, and we try to find a way to repair many different kinds of plastic parts!

Extremely detailed, and highly successful steering wheel restoration

@polyvance

4 жыл бұрын

Thanks for watching!

I cant help but think about the injection molding machine that cranked those wheels out by the thousands.

@JohnMartin-ni2pj

2 жыл бұрын

But the original steering wheels had a metal insert, not made of just plastic like the aftermarket ones made today.

@brianp6965

2 жыл бұрын

@@JohnMartin-ni2pj Uh, that's true. They still placed the metal ring in the injection moulding machine and molded plastic around the ring though. My comment was pointing out that after watching all of this labor to repair the wheel today, I thought about the guy who stood in front of a machine in the early 60's, putting metal rings in and retrieving finished wheels thousands of times, over and over.

loved what you did!!! i have a steering wheel that needs help.. lincoln twelve!!

@polyvance

Жыл бұрын

Thank you!

It drives me nuts that you went through all that work to produce a nice finish on that steering wheel and then you put back that crappy looking metal horn trim. You could have at least taken a light bit of steel wool to it to clean off the rough surface finish of the horn metal. Overall though, it was good work.

@polyvance

4 жыл бұрын

Agreed. I actually had everything re-chromed after making this video. Too bad I can't post a pic in the comments.

@MrTjmk

4 жыл бұрын

@@polyvance I hope I didn't come off sounding like a complete prick. I'm a recently retired auto upholsterer after about thirty-five years of doing that for a living. I'm afraid I'm just anal-retentive about stuff like that; even though I'm no longer in the game..

@Oldbmwr100rs

4 жыл бұрын

Totally see what you mean, just a good cleaning of the chrome would have made that nice restoration look that much better! Glad the parts were eventually restored, nothing like seeing well done work. I love doing restoration and having people enjoy the finished job.

Thanks for this great instructional video. I was wondering, how do you do a translucent metallic or pearl.

@polyvance

4 жыл бұрын

I'm not sure. My goal was to make the steering wheel better than it was, and it does look better.

I make a habit of being positive in my comments. Thank you for very clear instructions, and high quality video technique. I aspire to production with this high a value. The remainder of this comment is an exception to my usual habit. I am at 5:32 and stopped. beyond very clear instructions, I just dont see this particular repair working or holding up over time. I do 6 to a dozen steering wheels each winter. Here I see a steering wheel that is just flat out filthy that I would not work on until properly cleaned. I see filth in cracks that are being repaired. This stuff sticks to dirt but does not stick to polypropylene? Just look at the filth in the finger grooves! I see cracks with no fresh edge, no keying, and no hope of holding a repair as expansion and contraction take place I see unaddressed spider cracking directly adjacent to areas being repaired. the time for that dremel and the sander was BEFORE you laid in a lick of plastic to make clean, keyed crevices that will hold material! Based on the experience of seeing failed repairs, The "tiny and not too deep" cracks at 6:30 require cleaning and enlargement and keying using a dremel with a disc or burr so they dont show up at the primer step and they do not fail later. You made it look easy, however, the truth is cleaning that wheel properly was a detailed 3 to 4 hour job, and keying and cleaning cracks prior to filling was hours more. And a full keying job would have produced the need for much more material. (a positive for your bottom line!) In addition to your high quality video and narration work, Your paint job was great!

@scottb7600

3 жыл бұрын

The nature of the PlastiFix adhesive is that it will not stick to PP. Adhesives are formulated for a specific application. You may disagree, but just ask the guys who put in the anchor bolts in the "Big Dig" ceiling in Boston. They used epoxy, but it was the wrong epoxy and the adhesive failed and caused the ceiling to fall, squishing some poor folks. Plastifix adhesive is ideal on this type of material and holds up well. I'm not sure if filthy is the appropriate term for this wheel. True, it wasn't surgically cleaned but it was cleaned well enough. So far the wheel is holding up fine.

Love the duck tape and bungee cord in the after image :-)

@polyvance

4 жыл бұрын

That's actually aluminum tape (which we used in the repair process) and the bungee cord is part of our 6076 Bumper Stabilizer kit.

thnaks for show me how its done I wanted to know it was done this way .and very interested for me .

@polyvance

2 жыл бұрын

Thanks for watching!

respect!

@polyvance

4 жыл бұрын

Thanks for watching!

Good video.....thanks. Have 1 I need to do.......

@polyvance

4 жыл бұрын

Thank you and good luck!

as always it is so interesting to watch how you work, nice video! Off topic, what watch you have on your hand? :)

@polyvance

4 жыл бұрын

The watch ⌚ is a Fitbit Ionic. Thanks for watching!

That is awesome.. I love your ease of directions. I wonder if you could take the dimensions of the steering wheel and 3D print one? (Using some of the new printing elements like carbon poly, or some of the new harder materials?

@scottb7600

3 жыл бұрын

I would say you could definitely do that, but you would want to print it out of something that is heat resistant, not PLA. PETG might work, as would probably ABS or PC. It would be an interesting project if you had a really bad wheel to start with, one where the plastic was just falling off or you just had a metal ring. I would make it in two parts that fit snugly around the metal ring and snapped together. I would also use adhesive, like 2510 PlastiFix to lay a bead between the parts before assembling. (leave a space for the adhesive so it all doesn't get squeezed out). I don't see any reason why this wouldn't work, but it would be up to you to determine its road-worthiness. I'd love to see it attempted, anyway!

I might suggest using sandpaper to clean inside the crack for better bonding.

@seancrane8880

3 жыл бұрын

This wheel was not properly prepared. proper preparation would have taken 7 to 10 hours

@ Polyvance great video, what was the color code that you used for final paint?

Labor intensive! Beautifull too!

@polyvance

4 жыл бұрын

Thank you! And thanks for watching.

when using very thin strips of sanding papers (10:40), its a good, if not essential idea to put strong sticky tape or packaging tape on the back of the sanding paper. masking tape isnt usually strong enough.

@scottb7600

3 жыл бұрын

That's a GREAT tip! Thanks.

wouldnt be easier to just use epoxy? Could dye it to match the steering wheel color as well

@connorhurley1689

3 жыл бұрын

Possiblely but you can see how much difference in color there already is

LMAO, can i just send these folks my wheel?!? really nice results.

@polyvance

2 жыл бұрын

Thank you!

Great video and product. How long did this whole process take ?

@polyvance

2 жыл бұрын

Thanks! It took about 14-15 hours.

Great video. Primer surfaces & sealer don’t need a hardener? It’s ready to spray out of the can?

@polyvance

4 жыл бұрын

The primer and sealer do not need a hardener. They are ready to spray out of the can.

@scottb7600

4 жыл бұрын

That primer surfacer is waterborne and does not require a hardener like a 2K primer and sprays right out of the can. A crosslinker is available, although it is not necessary as the resin system in this primer is very robust without it and in my opinion the benefit is not significant enough to justify the paint wasted by not being able to pour the unused quantity back in to the can.

good luck

Great video, the final product looks great! How does this hold up considering that it is painted and the originally the steering wheel was the same color all the way through.

Extremely detailed video. Entertaining also I love how you sped up thru the mundane steps like sanding & stuff yet still kept my "short attentions span theater level " glued to see what's was next Great results ,product & video. how long did it actually take from start to finish?

@scottb7600

3 жыл бұрын

Total time was "about 15 hours," said from the guy who did it...[not me, btw]

Is this product just a relatively-large bottle of cyanoacrylates super-glue and a relatively-small bottle of baking soda ?

@CreatorCade

4 жыл бұрын

I’m willing to bet that’s almost exactly what it is.

@polyvance

4 жыл бұрын

No. PlastiFix is a special type methylmethacryalte designed for ABS, PC, Acrylics and other hard plastics. Superglue only bonds to the surface of the plastic. It is also very brittle and only has about 30% the strength of a PlastiFix repair on hard plastics. PlastiFix chemically etches itself into the plastic and should not fail. Plastifix uses a liquid monomer to polymerize the powder to form MMA plastic in an exothermic chemical reaction. The most common forms of MMA include acrylic and lucite. The individual components have no adhesive properties without the chemical reaction of the two ingredients, unlike super glue. Because the components can be reacted directly on the surface to be bonded, the added benefit is that the reaction incorporates the surface molecules of the base plastic, creating a chemical as well as physical bond on some materials. The chemical AND physical bond make this type of repair extremely durable and impact resistant, plus it is sandable and easily painted, unlike super-glue or gorilla glue type repairs.

@scottb7600

4 жыл бұрын

@@CreatorCade I'd take your bet; you will lose. Its a different chemistry than CA glue. By themselves, the power nor liquid has any adhesive qualities; its only when they are mixed does the magic happen.

@milfordcivic6755

4 жыл бұрын

@@polyvance BURN!

@edwardalamo2507

4 жыл бұрын

J B weld works good too

I'm afraid the old plastic will just continue to crack and check. Do you have materials that could be used to take a mold and re-cast the entire wheel?

Very helpful! Now I'm about 90% certain that my truck will be getting an aftermarket wheel. Results look great, but entirely too much time and effort for a non restoration like mine. Not like I really need the 17" wheel with the power steering upgrade and the extra belly room would be nice.

What color is that i like it

That’s a lot of work- what does a professional restoration person charge for this service?

@Ecosse57

4 жыл бұрын

more.

being one that has worked many a long day in trauma rooms i realize and respect what the airbag has done for safety, but sure has taken away the uniqueness and style of these old steering wheels...

@polyvance

4 жыл бұрын

Agreed. I hope I never get in a wreck with this car. It only has lap belts and a non-collapsible steering column.

@wilkesjournal

4 жыл бұрын

@@polyvance That's ok. When any car collides with a '66 Chrysler, that other car will absorb almost all of the impact. It might be easier to think of the entire other car as a crumple zone. This steering wheel looks great by the way!

@scottb7600

4 жыл бұрын

@@wilkesjournal That's hilarious! I love that perspective.

you da man

Nice job guys. Another way to mix small amount of paint hardener to paint is to get a digital scale and weigh the ratio. More accurate.

@polyvance

4 жыл бұрын

Good point, but the instructions were for "volume". Besides, I doubt it has to be too exact.

Hey guys l have a 70 dodge coronet the steering wheel is rough classic industries makes a repo for $249 no horn ring it’s a the pebbled finish will this work and cost compared is it worth it. Thank you. BTW awesome video.

Thk now I can work on my 67 mustang FB steering one more question from where I can buy the material thk

@polyvance

2 жыл бұрын

The products used for this are listed at www.polyvance.com/Steering-Wheel-Restoration/

Man, that's a lot of work! It would almost be easier to mould a new steering wheel.

@steinbauge4591

3 жыл бұрын

Not really an option. This is how much work a serious car restoration takes.

Do all the applicator tips make a barking noise when you remove them?

@polyvance

4 жыл бұрын

I rewatched the video and I don't hear a barking noise.

@jth1987leb

4 жыл бұрын

Start at 1:25.

@polyvance

4 жыл бұрын

@@jth1987leb It's just a side effect from the video being slowed down.

Can we just use JB Weld?

@polyvance

4 жыл бұрын

I'm not sure. We wanted to use products that we sell.

My 1965 Pontiac has clear parts . Is there a clear product ?

@scottb7600

4 жыл бұрын

Polyvance does make "CLEAR" PlastiFix. It is mostly clear when cured , but its difficult to totally eliminate a small amount of air in the cured product. If you decide to use this, use the "Dropper method" for application with the applicator needle. Make sure each layer is completely wet out before adding the next layer, work in thin layers (1/16 in) and don't stop in the middle to let it cure out; this will minimize air entrapment. Also, you will never eliminate the seam line between the repair and the original part. Think of it like the bonded joints in an aquarium; they aren't horrible to look at, but they are there. Cured PlastiFix can be polished out to a high gloss mirror-like finish. So will it be an completely invisible repair, no, but it will certainly look and feel better than a crack.

So when you installed the steering wheel, you already had connected the battery cable,

Nice vid. Just in case anybody is wondering, an OEM wheel for 66 Newport is around $240.00/$250.00. Nice savings, even if it is a bit of work,

@polyvance

4 жыл бұрын

Where can I get an OEM wheel?

@MrMobo41

4 жыл бұрын

@@polyvance Just type in OEM steering wheel for Chrysler Newport and they will come up. Found one on Amazon for $289.00 and another from JEGS for $299.00. There are others.

@scottb7600

4 жыл бұрын

@rats arsed how could you possibly know if its durable or not? And as far as original, good luck finding the right original wheel in perfect condition. Restoration, by definition is not original , its a repair of something to look as original as possible.

How do you know what "plastics" were used one steering wheels? And will it shrink again?

@scottb7600

4 жыл бұрын

Good question. To the best of my knowledge, acrylics, polycarbonates and bakelite were all used. They are all hard plastics that are fairly stable. They will continue to shrink somewhat (they start shrinking as soon as they are made) but at a slow rate. The repair will also shrink over time, but should last just as long as the original if done correctly. In fact, because old cars are generally not stored outdoors like they are when new, the repair may last longer as its won't be subject to harsh conditions daily.

Labor intensive, definitely need the correct tools to complete this project or it will be a disaster. However, anything worth doing should be done right.

Is there a video demonstrating the PlastiFix FlexMold Molding Bar?

@polyvance

Жыл бұрын

Yes! This video (kzread.info/dash/bejne/maJ3zpiol9fMiqw.html) and this video (kzread.info/dash/bejne/g4Kpj9KKlLO9e7w.html)

Who can i find for someone that is a professional to do it for me

How long did it actually take to do this

@polyvance

4 жыл бұрын

About 14 hours.

Dry sanding?

@c50ge

3 жыл бұрын

That many hours of wet sanding would make your finger tips wrinkle up like a raisin. Bad case of Dish Pan Hands!

how long will it last ?

@alexlopez2359

4 жыл бұрын

Not long depends on how much you drive it. It will crack in 90 days if you drive it everyday

@robfassi3297

4 жыл бұрын

It’s gonna crack again soon like the parts that didn’t crack will crack

@polyvance

4 жыл бұрын

It should last indefinitely.

What paint color/code is that?

Nice job, but the chrome horn ring should have been polished before reassembly.

@polyvance

4 жыл бұрын

The owner of the car had everything re-chromed after making this video.

Add colour to the mixture? Can you?

@scottb7600

4 жыл бұрын

Add color, you cannot.

best fucking video i watched

so if the home mechanic wants to restore uding this procedure,.. but has no paint booth... whats going to be the cost just for products??

@polyvance

2 жыл бұрын

The individual PlastiFix kits are currently $38.95 each. Our least expensive aluminum tape is $16.95 and our least expensive cleaner is $16.95. Those are the products for the repair. The rest of the products are for refinishing. The list of all products can be found here: www.polyvance.com/video/plastifix/steering-wheel-restoration This does not include the grinders, sandpaper, etc.

Now the steering ring will have to be re-chromed!

@polyvance

4 жыл бұрын

The owner of the car had everything re-chromed after making this video.

would you restore my steering for my 67 chevelle , black ?

@polyvance

3 жыл бұрын

Sorry, we don't offer this as a service. This is just a video to show people how they can do it themselves.

*A whole lotta' work! No do something with that grubby horn ring, will 'ya?*

@polyvance

4 жыл бұрын

The owner of the car had everything re-chromed after making this video.

View this video on on our website for helpful information and product suggestions for this repair: www.polyvance.com/video/plastifix/steering-wheel-restoration

This would have been a great opportunity to have the horn ring re-chromed.....

@polyvance

3 жыл бұрын

Yeah, the owner of the car had everything re-chromed after making this video.