Товарищ, верной дорогой идёшь в будущее! Партия не забудет тебя и твой труд!

Уже пол года просматриваю в сторону такого долбежника, а сейчас и инструкция по ремонту есть😃 Спасибо 👍👍👍привет с Кузбасса🐻

@a.azazagoth5413

Жыл бұрын

My father has one that his father gave to him that I will someday cherish. Cheers!

Ой, как приятно, что Вы взялись за раритетное изделие из СССР! Не зря говорили: советское - значит лучшее! Наши старые инструменты практически неубиваемые, сделаны с огромным запасом прочности. Хотя, дизайн не всегда на высоте, это правда. Зато работают, работают и работают! И посмотрите, внутри изделия - чисто, ни пыли, ни масла. С интересом жду продолжения! Успехов! Лайк!

I've said it before, I'll say it again, HTR is an awesome channel showing how amazing results are not because of a billion dollar machine shop but because of very skilled hands. Eric also disassembles things like a normal human being. He doesn't act like hes performing miracles every time a screw is turned or a bolt removed. He beats and wrestles things apart 🤣

@bayadere8308

Жыл бұрын

Could not agree more. So much 'warmth' throughout these videos whereas a few restorers have become anal in their pointless attention to the enth degree. I feel like saying yes mate, we know you're brilliant and have expensive machinery but please, don't forget to love the thing you're restoring.

This is the perfect Guy show. Tools, sped up for attention span, no drama, couple moments of humor and practically no talking.

@HandToolRescue

6 жыл бұрын

Thank you!

@accaliamurraymusic

5 жыл бұрын

I appreciate those parts of these videos too. (PS - I am a woman)

@SeiferTV

5 жыл бұрын

I couldn't agree more, honestly

@user-iw4gd9qf9s

4 жыл бұрын

@@HandToolRescue hai? Broser! hai in Russia! you peace broser!

@mm-jn1gz

4 жыл бұрын

Hey! I enjoy these videos too!

1:56 The knob is actually a grease reservoir. It lubricates the bearing at the end of the bar. By turning the knob you squeeze grease out of the tube into the bearing.

I'm an 82 to woman and I love your videos. Everything about them.

@HandToolRescue

3 жыл бұрын

Thank you!

Представьте если он доберётся до реставрации бензопилы "Дружба")) Вот обматерится)

@user-qk8ez4wf1n

6 жыл бұрын

Svidu Prost пила дружба наше все! Надо ему намекнуть

@KofaYoh

6 жыл бұрын

Не не не! Мне нравится его контент и я не хочу терять адекватного ютубера)

@videograph2697

6 жыл бұрын

Да, уж! Вроде бы не сложное устройство, но одной серией не обойдётся!..

@TheDarkvindetta

6 жыл бұрын

Главное ему наш москвич не показывать

@JackDanielsnumberone

6 жыл бұрын

ему уже прислали "дружбу". можно в инстаграме посмотреть

I like your videos so I thought I'd try to help a bit with this thing. It's a 3-phase 220V 50Hz instrument. The label says "Depth 160mm, 2800 RPM" (I suppose you guessed that). The code under the model index is the "special technical conditions" which is the technical standard for this particular tool. Interesting thing about this is that it's made for the voltage standard that doesn't exist anymore. USSR used to be either 1-phase 127V or 3-phase 220V, then it changed in the 50s-70s. The tool was manufactured by the "Electrovypriamitel" (good luck pronouncing that :-D) plant (hence the EV abbreviation on the label). The plant's name is translated as "electric rectifier". The plant is located in the city of Saransk. It still works, btw, but no idea what they make. This model was produced from at least 1969 till early 1980s. Hope it helps.

Из России с приветом! Подписан на канал уже с пол года. Спасибо за видео)

@HandToolRescue

6 жыл бұрын

Спасибо за просмотр!

@lyubomirgarev1616

6 жыл бұрын

Поддерживаю, молодец! Мне понравилось как он провода топором рубил, это очень по Русски!

@user-tt8xb5ib2j

6 жыл бұрын

Украина тоже смотрит )

@user-vj8nc2ic6s

6 жыл бұрын

Смотрит, смотрит.

@videograph2697

6 жыл бұрын

Тоже из России, смотрю канал с удовольствием и ставлю лайки ещё до просмотра!

меня больше удивляет его необычайный набор инструмента, чем сам забойщик.

What I like most on your videos is the fact, that you immediatley start with disassembling and working and not showing every little defective part, rust and so on over and over again like other guys. And of course the sandblasting with your head on the lid. Go on!!!

3:25 Dude, that screwdriver! If it had a hex socket type deal, that thing would be unstoppable!

@HandToolRescue

6 жыл бұрын

Maybe I will remake those one day as well!

@Kolajer

6 жыл бұрын

Hand Tool Rescue That's what I'm talking about!

@mercuryus

6 жыл бұрын

I will have one!

@RossTFarnsworth

6 жыл бұрын

Is your Screwdriver an H.D. Smith & CO No 611 "Perfect Handle" Triple Lever Screwdriver. They were the original Makers in Connecticut of this style of Screwdriver. Here is a link from Progress is fine all about H.D.Smith and Co. progress-is-fine.blogspot.com/2012/12/the-perfect-handle-screwdriver.html and one from WK Fine Tools otools1.wkfinetools.com/mechanicT/HDSmithCo/tools/AdjustScrewDriv/AdjustScrewDriv-2-01.asp The Second page has W.S Thomsons Patent application dated Aug 8th, 1911 with a great drawing of the Screwdriver. I would think that if you were to bring back this line, tool rescuers would buy. I have seen you with other Perfect handles but the could be knockoffs or German made. I know what I am going to be hunting for this summer...

@wasimjaan3300

6 жыл бұрын

Kolajer i try to google it...but you cant get it...its not available for sale..😑

This vintage equipment so rugged I love it! And I love that you’re restoring them back to working order.

Literally more care and attention paid to this than ANY Soviet-era Russian machine produced for any purpose previously. Congrats...

Comedic and informative, Hand Tool Rescue shows the methodically challenging process of turning trashed tools into well-oiled machines!

The wire wheel bit cracked me up. This tool is really interesting. I can't wait for part 2!

@OeMpaK

6 жыл бұрын

wait a minute, your comment was a day ago, but this upload just arrive on my subs 5 mins ago, how is it possible ?

@HandToolRescue

6 жыл бұрын

Sorcery.

@BarryIrwin

6 жыл бұрын

Now I know what I've been doing wrong :-)

@Crewsy

6 жыл бұрын

the owem One of the benefits of being a Patron. 😀

Your videos are some of the best restorations i have seen,you really take the time to work with each part.nothing left behind, great work.

The Motherland is proud of you by restoring this Glorious Piece of Soviet Machinery. ЗЛАВА ТОВАРИЩ!

Никогда такой штуки не видел. Интересная вещь!

Amazing work so far brother. I'll keep those sandblasting techniques in mind for my future usage.

@MorbidlyObeseChell

5 жыл бұрын

I don't like sand, it's course, and rough ,and irritating ,and it gets everywhere.

I would be very surprised if you took this saw apart without a hammer) With greetings from Russia

@Papperlapappmaul

6 жыл бұрын

That's what I like about Russians, they embrace their own stereotypes and have a good laugh about it.

@videosunrelated1883

6 жыл бұрын

They have to embrace their stereotypes... The government requires it.

@hackdogx5256

6 жыл бұрын

Well, well, well

@videograph2697

6 жыл бұрын

Посмотрите внимательно, как автор обходится с устройствами сделанными в США!

@TheDarkvindetta

6 жыл бұрын

надеюсь тут он не будет "играться деталями" и "пробовать нутеллу" под видом отработанной смазки

I can’t believe you’re from Saskatchewan Canada because I’m from British Columbia Canada you’re my favourite KZread channel can’t believe the things you restore and it is a part of history

Хорошее видео ,за гимн СССР отдельное спасибо.

Love the color! What a great way to start the morning.

@harkinspat12

6 жыл бұрын

Cool!

5:29, using an axe as a wirecutter.😀

@tomtruesdale6901

6 жыл бұрын

Why use cutters when you have a Viking Battle ax handy?

@MrBobbin01

6 жыл бұрын

Hey it worked.

@turtlesteam7895

6 жыл бұрын

axe is a national russian tool (as russians says). it works with rasputin face as at 15-40)

The wiring in this tool is so much nicer than previous american made tools you have restored. And it was grounded, Thats amazing.

The axe instead of some cutters was *chefs kiss*

"Comrade, we don't have any three-pole switches!" "Never mind, use two-pole, motor will stop!"

What I found about this thing, was the following: The IE-5601A has an in-built squirrel-cage motor with cooling fan attached to the rotor shaft on one side and driving gear on the other. The gear moves the cutting chain which is pulled on the guide bar by the limit screw (the one, you're not sure about). The head with chain can be moved within directional columns that are installed on the base of the mortiser. If you press the lever the head goes down. It is lifted with springs automatically. This thing can mortise to maximum depth of 160 mm. The sizes of possible mortises are: 8х40х100; 12х60х160; 16х60х160; 20х60х160 mm. Overall sizes of the mortiser: 310х300х505 mm., the mass is 22 kg. They also say, that you can find these brand new on flea markets for 3-4k rubles (roughly 48 - 65 USD). Hope this might be useful and sorry for the possible translation errors.

@charlieboyzname

6 жыл бұрын

Михаил Щербаков thanks for the information

@a.krugliak

6 жыл бұрын

да, еще их было несколько модификаций: www.shoptool.ru/article/2.html И судя по вот этому объявлению: www.olx.ua/obyavlenie/dolbezhnyy-pazovalnyy-shiporeznyy-ie-5601-IDuc9Gg.html#802b7d00d3 как минимум моторы для этих станков производились вот тут (в 50е точно, судя по фотографиям из объявления) - www.vibrators.ru/ Думаю, что если обратиться в архив завода - можно найти более подробную информацию :)

Cracked me up when you head-butted the sandblaster window, and then even more when you looked at the camera with that look. Made my day. XD

this is well made for a late era soviet tool. i'm impressed.

Sharpening the wire wheel with a file, what a savage!

@MrBruce-np9rj

6 жыл бұрын

I've often wondered how to do that. I learned something new today. I've also often wondered how many wires have flung off that wheel and are embedded in his shop coat

@mat100ca

5 жыл бұрын

might be a stupid question but what's with the paint can at 17:45

I really liked how you chopped a wire with an axe at 5:27. Probably you have some Soviet relatives :-D Also if anyone cares, it is really amazing how geographically diverse this thing is: bearing at 10:19 is from 13-ГПЗ factory in Vinnitsa (Ukraine) and bearing at 14:25 is from 3-ГПЗ factory in Saratov (Russia). That's like 1300 km. or so...

@HandToolRescue

6 жыл бұрын

Thanks for the information!

It's always a pleasure to see you work, I'm waiting for the second part...

As it’s sped up, when you put your head on to the sand blaster it looks like you just threw your face into it.... that made me chuckle, the face you pulled afterwards had me in stitches!! Great video! And that screwdriver thing looks so handy!

l like the color you painted it,

@HandToolRescue

6 жыл бұрын

Thanks! Wood.Work.LIFE. on KZread chose that colour, as it will be his.

@mustie1

6 жыл бұрын

l have the drill in the attic , in the event l can ever find a carb kit, but if you find that you want it back sooner just let me know.

@IvanumASS

6 жыл бұрын

Nice work! But, i'm afraid, that our soviet industry didnt used any paint at all, becouse paint is a capitalist intrigues) (kidding). Glad to see something from Russia on your channel! Love it!

@maggs131

6 жыл бұрын

Could have painted it communist red lol

@helojoe92

6 жыл бұрын

now it's a Makita lol

I think that adjustment knob you arnt sure of is an oil well. From the bar and chain.

@HandToolRescue

6 жыл бұрын

Makes sense now.

@jballew2239

6 жыл бұрын

Agreed, an oil pot/grease pot for the bar roller.

@MrRadioAct

6 жыл бұрын

Yup thats putting oil down to the rolly fun bit

About this machine using three phase engine - almost all high end profesionall tools were and still are made to run on three phase AC - drills, impact drivers, even angle grinders, everything. Old tools like this are made to use stabdard 3x380V AC at 50Hz, newer ones are made to run also on 3 phase AC but on low voltages and very high frequencies, for example 3x200V and 300Hz. Check websites from Bosch and other brands for ultra high-end tools - they are almost all made for high frequency 3 phase AC. One of the main reasons for using 3 phase AC is that electric engines are very simple, have a lot of torque and are very durable. I own 3x380V grinder, Galvanotechnik Leipzig, that thing is real beast and literally unstopable. I am sure that it would be great project for this channel to restore.

У меня до сих пор хранится куча советского электроинструмента. все до единого в рабочем состоянии. раньше делали на века.

Эхх, синяя изолента, значит можно было и не разбирать!))

@TheDarkvindetta

6 жыл бұрын

наверное он не знает про силу изоленты . Американцы обычно используют армированную ленту серого цвета

@TinTaBraSS777

5 жыл бұрын

ник ники синяя изолентв лечит геморой что б ты знал

@Shaitan1978

4 жыл бұрын

Да че они понимают, такую вещь запаганил)

@RussianEngineer

3 жыл бұрын

Там покруче заклинание было: алюминиевая проволока! 0:14 Да и заводской шильдик закрасил, за такое, этому "реставратору" руки оторвать...

@victorbrand8913

2 жыл бұрын

Он синей изолентой обмотал один из двух проводов, чтобы так отметить и потом при сборке не перепутать.

ты молодец и с чувством юмора )✌

Спасибо) такой в первый раз вижу агрегат )

You are a cross cultural phenomenon! Just as many comments in Russian as English. I'm sure there are tons of old tools sitting in garages all around the globe you could restore.

люди будут телепортироваться на другие планеты, жить в виртуальной реальности, загружать знания в мозг подобно компьютерным программам, - а эта хрень всё равно будет работать.

@videograph2697

6 жыл бұрын

Не такая уж и хрень! Ей всего лишь 45!

@9999Mihas

6 жыл бұрын

... на росийских заводах, ведь со времён совка нихуя не производили

@9999Mihas

6 жыл бұрын

и при том что это делалось в латвии

@MGZetta

5 жыл бұрын

Yeah what he said.

@javierhernandez1390

5 жыл бұрын

mrLumen2 так точно!

That wire cutter works well, too.

Man love watching your work. And super jelly of some of the tools you have on hand. Awesome watch, both parts, as always

Nothing short of absolutely amazing. Thank you!

Part 2 Soon Please

Great job as always Eric

@eporter5071

2 жыл бұрын

Thanks

I can not wait to see the finished product that thing should be a beast

Вообще отлично! Спасибо за интересные видео. Очень рад, что смог отреставрировать такую раритетную вещь, как эту пилу времён СССР!

Советское - значит отличное! Потому что работали Инженеры, а не маркетологи. Поработает теперь эта пила ещё лет 40. Жду каждый раз с нетерпением новых проектов :) PS топор, лом и проволока для советской техники просто необходимы и порой мне кажется шли в комплекте.

@baxxxxful

5 жыл бұрын

@@Ananas0902 Не спизжено, а куплено! Знайте своё прошлое и не выдумывайте херни!

I live for your videos

I love this! 5 minutes in and I'm like oh he needs to cut the wire. Then you bust out an axe and chop it. Perfection!

Previous owner was like "I dont give a shit about cleaning my tools". Good Job btw ! I like how it turns out !

In mother Russia we mortise with chainsaw

@HandToolRescue

6 жыл бұрын

It's the most fun way to mortise.

@L30ne

6 жыл бұрын

In Austria we do too ;)

@oobaka1967

6 жыл бұрын

In Canada, we just say "sorry"

@Bill23799

6 жыл бұрын

I think Mr Chekhov on USS Enterprise said that Russia inwented the Mortise.

@MaximilianBrandt

6 жыл бұрын

With 3-phase grounded chainsaw made from STALINIUM

0:48 We call this type of repair (with piece of wire) "country welding".

That roller bearing at the tip was mind blowing - we're so used to standard ball bearings.

This is my favorite one yet! Can't wait for part 2

LOL, Stroganoff powered!

Dude... please tell me you're gonna say "previously on Hand Tool Rescue" on the next video...

@HandToolRescue

6 жыл бұрын

Oh, 100%.

God bless you for all of the flat head screws you deal with.

Thank you for restoring this magnificent Soviet machine. The 3-phase power is symbolic: it refers to the three stages of economic development, whereby in the age of slavery, empire exploits barbarians; in the age of feudalism, aristocracy exploits the bourgeoisie; and in the age of capitalism, the bourgeoisie exploits the proletariat. Chisels are obviously bourgeoisie, and it stands to reason that dovetails are not only weak and effeminate, but fundamentally decadent, and therefore counterrevolutionary. Nails and screws are also the products of bourgeoisie exploitation, meaning that mortise and tenon joints -- which require no capitalist fasteners -- are politically correct, especially in Comrade Trudeau's Peoples Republic of Kanuckistan. Woe betide any galvanized stooge-of-a-nail that gets between the Mighty Soviet Mortiser and and its Five Year Plan for Slot Cutting and Filling. Cut slots and more slots, Comrades, the future beckons us onward and upwards, towards an everlasting Utopia (Siberian Style). The spring clips are also symbolic of the New Dawn that will occur when capitalism is finally overthrown so that the people can rise up and cut lots of slots in aromatic Siberian softwood. Even now, brave Antifa technicians are preparing thousands of liters of Goof Off for this most blessed and balsamic of days. The difficulty experienced in disassembling the unit is symbolic of the materialistic yet quasi-spiritual bond uniting all devout Soviet atheist carpenters. It should also be stated that the several apparent cracks and flaws in the Soviet castings were the result of external capitalistic stresses, and are in no way indicative of Soviet metallurgical or foundry expertise and practices (it is most appropriate that you repaired these capitalistic defects with a red-colored paste: LONG LIVE THE RED BANNER!). Now I know you can predict my only complaint, so here goes: WHY DID YOU PAINT A MAGNIFICENT SOVIET TOOL MAKITA-TEAL????? I'm going to reboot now, and dream of the miracles paint remover can perform...

The Soviets made some pretty rugged gear.

@felixar90

6 жыл бұрын

Scott McLennan that casting mold was worn out AF tho

@Deemon1

6 жыл бұрын

Scott McLennan almost all was 1:1 copy from Germany or USA made. Sad, but true

@puckcat22679

6 жыл бұрын

It seems to me that Soviet equipment and machinery tended to be ugly and clunky, the technology really old and obsolete in the West, the build quality ridiculously variable, ranging from "perfect" to "entire factory was badly hungover from weekend bender." But they were usually ridiculously simple and user serviceable, and insanely over-engineered, so once the user worked out the factory defects, it would last forever and withstand pretty much any abuse that was thrown at it. A lot of small workshops in Europe will buy this stuff because they can get it cheap and they can rely on it. Look at Lauri's big lathe (hydraulic press channel) It's an ancient Russian machine that he and his dad have modified with modern controls and such, but the thing is a tank. I guarantee that it needed substantial tweaking by the original owner back when it was new, however.

@scottmclennan6114

6 жыл бұрын

felixar90 yes there were cracks aplenty.

@scottmclennan6114

6 жыл бұрын

puckcat22679 yes that’s what I meant, over-engineered and pretty heavy duty.

2:50 DON'T TRY THIS AT HOME, HE'S A TRAINED NINJA

Dear Hand Tool Rescue, hi. The first part is AMAZING. You are Monster, bro, Monster Master. Congratulations. Gracias, M. From Brazil, Rio de Janeiro, Rio

Saw FOR THE GLORY OF MOTHER RUSSIA =) MADE IN USSR WITH LOVE Привет из России. Классный канал, использую кое-какие хитрости для ремонта, которые подсмотрел у вас!

СОЮЗ НЕРУШИМЫЙ РЕСПУБЛИК СВОБОДНЫХ!! Привет из России

@videograph2697

6 жыл бұрын

Блин, оказывается я не один из Союза на этом канале!

@SignumHero

6 жыл бұрын

не один )

@Merik-1337

6 жыл бұрын

VideoGraph это круто

@Merik-1337

6 жыл бұрын

Алексей Степ 👌

@nesurasen5978

5 жыл бұрын

Я ваш голожопый союз на хую вращал. Совкодрочеры должны повторить великий подвиг всея свк - стать историей, которую ни в коем случае нельзя повторять, будучи в здравом рассудке. И вообще, откуда у передающего прЕвЕд "из эСэСэСэР" буржуйский персональный компьютер и интернет? Пиздуйте паять клон "спека" на лампах... И аккуратней, чтобы сосед в НКВД не вломил, а то ещё сгноят по Сибирям за подрывную деятельность и шпионаж Пиздато в совке было, слов нет. Свободно так...

Stereotypical Russian made. Big on toughness, infinitely repairable, low on tech. Or, as we used to say "Strong like ox, smart like streetcar".....lol......Was that part you were wondering about a tube to oil the nose sprocket bearing? Oh yeah....I love the desoldering tool.

@gsx743

6 жыл бұрын

American technology of that time is also not particularly "technologically". At the same time in the Soviet line of woodworking machines were excellent options that will give odds to modern machines. Many Russians still have Soviet irons, stoves and other household appliances in their cabinets, which can help out in the event that the new fashion equipment does not work for more than a couple of months.

@metaalateliermetal

6 жыл бұрын

i think two that it is a greaser for the nose-wheel, turn and grease system...?

@bnadvornik

6 жыл бұрын

Is good, strong like bear!

@user-mm5db4zk1i

6 жыл бұрын

Скажи это нашим танкам.

@VentelR

6 жыл бұрын

Михаил Бурмистров танки то тоже по такому же принципу, полудурок

Great video! Made me LOL, several times! I never knew about sharpening wire wheels, now I'll have to sharpen all of mine...

I always love you videos....they are interesting, very relaxing and satisfying to watch! cheers

Is that pipe that runs the length of it some sort of tube that allows you to oil that bearing?

@HandToolRescue

6 жыл бұрын

Possibly!

@MukYJ

6 жыл бұрын

That was my thinking too, it's an oiler.

@selmirikanovic

6 жыл бұрын

It is definitely oiler. I have something like that on my tractor. You unscrew the big cap and fill it with grease. While you screw it back it pushes grease trough the small tube to the chain guiding roller bearing.

@Fierofreak01

6 жыл бұрын

I'm going to add my .02 and say the same thing, its got to be an oiler, I think that plastic cover unscrews. I was scanning the comments to see if anyone else picked up on that.

I think the tool is single phase 220 - 240V - if it was 3 phase, the third leg would also have been switched...

@turtlesteam7895

6 жыл бұрын

it`s actually 3-phase and 220V.

@alc818

6 жыл бұрын

After looking at your video again, the ID plate certainly indicates that it is a 3 phase unit. I also found that it is not uncommon to find only 2 legs of three phase power being switched as the third leg is required to spin the motor. Having said this, it may be unsafe to do so depending on how well the motor winding is insulated from the frame. I do not believe the US NEC would allow this, but it is a Russian tool and they may well have approved of this practice. I would be careful to insure that the tool is not used in wet conditions or left plugged in when not in use.

Thanks for the wire wheel sharpening lesson & I can never find my wire cutters so thanks for that idea too!

I love your videos! You always get really fascinating stuff to "rescue"

In Soviet Russia, hand tool restores you.

The soviet communist anthem killed me aha. Great vid man!

@HandToolRescue

6 жыл бұрын

Summer/Fall this year.

@user-rr5ud4qy9n

2 жыл бұрын

Аппарат для установки замков

Hand Tool Rescue + AvE = greatest collab ever.

Can't believe you painted this beautiful aluminum beast.

👌👌👌 sooo when are we going to start production of that screwdriver thing? Cuz I got to get one of those!!!

@HandToolRescue

6 жыл бұрын

Haha, maybe one day.

@chrisgrubisa3819

5 жыл бұрын

That is the most badass tool I've seen in a while.... fucking mint 👌

In Russia saw repair's it's self

@DelOk85

4 жыл бұрын

Бред

Beautiful old machine, I would love to get my hands on one.

And some people thought everything made in in the USSR was by people who hated what they did and made total garbage, clearly not all the stuff was bad, this looks well made for the time.

Dosvedonya (sorry the only Russian I know if from Bond movies...) That is going to be one amazing tool. I still wonder why they made it three phase? Maybe Russian electric motors aren't that good? I was thinking to myself the whole time "American components, Russian components, all made in Taiwan.) Super excited about this!

@HandToolRescue

6 жыл бұрын

Thinking about it now, it's essentially a brushless DC motor, which is basically a three-phase AC motor.

@jimsmith5148

6 жыл бұрын

that three-phase asynchronous motor with squirrel-cage rotor

@yurikounikov4308

6 жыл бұрын

It is partially correct that three-phase motor was implemented there because of poor quality of single-phase motors. But maker of motor isn't as important, Russian or US or UK or whatever else, this item was built for industrial use so brushed AC motors and even 1-phase async motors are really worse because these motors have limited-life spares like brushes or capacitors. And there were no problems to have 3-phases current on the factory. In USSR that really matters because of total deficit of consumables. I used to make brushes myself from the trolleybus' current collectors for some handtools with brushed motors and it was a real challenge. So I fully understand the reason why this motor was put there. It was the only way to provide long life of the appliance.

@WoodWorkLIFE

6 жыл бұрын

Thanks so much, it is awesome to get actual answers on the internet. That totally makes sense in a factory setting. I would've imagined these being more field tools and having dedicated machines for factories that weren't as portable, but it would totally make sense to have on of these in a factory. I wonder what it would have been used for?

@yurikounikov4308

6 жыл бұрын

I suppose my English is just a bit better than your Russian ))) When I use words "factory" or "industrial" in concern of this tool I jusn mean "not for household". The use of this tool is obvious - to punch rectangle holes in the wood details, up to 160mm deep. You can watch this item running here: kzread.info/dash/bejne/X2Wp1Mqunby8pqg.html

0:53 Russian nano provolka☻

@user-dx1yn7es8c

6 жыл бұрын

проволОка

@yarikkhotko4436

5 жыл бұрын

сергей приходько проВОДКА

@DelOk85

4 жыл бұрын

ПроВолодька

This channel makes me so happy. Thanks for what you do guy :)

Yep, that screwdriver is just A-W-E-S-O-M-E! I'm looking forward to part 2!

Лайк если слушал советский гимн стоя

"I'm not sure what this does" don't worry,neither do the Russians

крышка на проволочке держится, улыбнуло 😁

Awesome work looking forward to part 2!

Made in Japan: 1kg Made in USA: 3,5 kg Made in German: 6,5 kg Made in Russia: 15,00 kg 🤣🤣🤣

@RussianEngineer

3 жыл бұрын

не 15, а 22.

@Ragnar8504

3 жыл бұрын

I had to check that - you can still buy a brand-new Makita chain mortiser and it weighs 18 kg! A German Mafell weighs less than half at 8.7 kg!

Привет из России. В начале видео играет гимн СССР) Мы не коммунисты, вставь современный гимн на вторую часть этой рестоврации.

@HandToolRescue

6 жыл бұрын

That is exactly my plan! I want to play the modern one once the tool is fully restored, since it was originally made in the USSR.

@KofaYoh

6 жыл бұрын

Ты меня успокоил товарищ. Пойду выпью водки и погуляю со своим домашним медведем рядом с ядерным реактором))) Желаю успехов в работе)

@dinozauer

6 жыл бұрын

Не забудь сыграть на балалайке)

@DaMIR163

6 жыл бұрын

Вроде же самагонка ?)))

@videograph2697

6 жыл бұрын

рестОврации??? Неплохо было-бы патриоту хотя-бы Русский язык подучить)))

Addictive video mate. Keep up the good stuff. Can't wait for part 2.

I don't normally comment on videos but the sand blasting table moment had laughing my ass off. I'm living vicariously through you because I'm lazy. Keep it up!

19:06 Табличка должна была быть снята, выпрямлена и после покраски детали посажена на клепки заново. Халтура!

This is not a Russian instrument. Correctly say the USSR.

@user-qk8ez4wf1n

6 жыл бұрын

Dmitriy Vengerov Россия приемник СССР и всё что было произведено можно со смелостью относить к России и русским.

@geineddie

6 жыл бұрын

Anything west of Germany is USSR/Russia until you hit Mongolia.

@Crewsy

6 жыл бұрын

Could still have been Russian built during the Soviet era.

Wow that Soviet electrical tape is a piece of history

Anyone know of another channel that does things like these? Knife, gun, tool, ... Anything dirty and gunky that gets cleaned thoroughly. I cant get enough of this.

@HandToolRescue

6 жыл бұрын

Yes, check out Hand Tool Rescue.