1920s Power Hammer [Restoration] (Part 1)
Тәжірибелік нұсқаулар және стиль
This is a tool restoration I have been wanting to do for a while! It is a A. B. Jardine & Co. power / trip hammer from around the 1920s. These were called "Canadian Giant" hammers as they closely resemble the "Little Giant" hammers made by a different company.
Out of the two models they made, this specific hammer is the 25lb model vs the 50lb model. This hammer was $150 in 1915, so it puts the value at almost $4000 USD in 2018 dollars!
I picked this up locally about a year ago with plans to restore it once I had the space. In this video, I take everything apart and inspect all bearing surfaces. The babbitt bearings are in fantastic condition and must have been re-poured at some point recently in its life. The other moving parts of the hammer are not in good condition. Many parts have been poorly welded back together and every single hole is worn out. In the next video I will repair all these pieces and add bronze bushings to all the holes so this machine is safe to use again. Even the die blocks need replacing as I cannot trust the welds to hold.
You can actually still buy new parts for these hammers since they are so similar to "Littie Giant" hammers, but the parts are quite expensive.
I am definitely excited to see this thing running, but I do plan on selling this hammer, since I have found an even larger one!
I'd like to thank Evapo-Rust for sponsoring this video.
Wrenches are now for sale at www.handtoolrescue.com
Help secure more tools for future videos (if you want):
/ handtoolrescue
Instagram:
/ handtoolrescue
Facebook Group - Share your restorations
/ handtoolrescue
Reddit - Share your restorations
/ handtoolrescue
Пікірлер: 1 100
"This guard stops the spring from killing you" removes it, and proceeds to actuate it anyway - a true hero
@Kylev2
2 жыл бұрын
I like that the guard was clearly smashed off by the spring at some point in the past too because of all the welds on it.
so thats 900lb pre clean and around 800 after de-crudding !...
@Psyrecx
4 жыл бұрын
That's not crud... It's proper seasoning.
@RagingDong
4 жыл бұрын
A lot of that weight would be oxygen so mayby 2% of metal lost due to rust
been looking forward to this!
@HandToolRescue
5 жыл бұрын
Should I forge a smaller hammer with one?
It never ceases to amaze me how much work you put into your restorations, you obviously have a great deal of skill and knowledge and a love of what you do - your sense of humour makes your restorations and rescues particularly entertaining. I am aware other rescue channels are available, I accidentally clicked on one the other day and felt like I was cheating on you. Your videos are great and I don’t think I can be alone in appreciating how much work goes into them too. Be well, stay safe and thank you.
The king has returned.
YOu always have the most intereting items to restore. Best restoration channel out there.
@HandToolRescue
5 жыл бұрын
Thank you!
Restoring old power hammers (and other kit) is very soothing and satisfying
Major Scratches is a great name for a cat.
@tedderjason
5 жыл бұрын
Mines name is Pants the third
@fouroakfarm
5 жыл бұрын
Or a DJ
@nickkk420
5 жыл бұрын
Mine was jack, so when he was on my furniture I could tell Jack off!
@nathanbinns6345
5 жыл бұрын
I would go with Sgt. Scratches just for the alliteration
@tedderjason
5 жыл бұрын
@@nickkk420 my dogs name is Jax, I say Jax Off! Every day hahaha
Almost 100 years old and still reparable... that's quality right there, most modern tools won't last half as much.
@maggs131
Жыл бұрын
Half? Most garbage shat out today is engineered to fail in less than a decade to keep the buying cycle eternal
I removed a wisdom tooth today, and this long video was exactly what I needed to feel better. Thank you and the Canadian giant!
@HandToolRescue
5 жыл бұрын
Next time you can hammer them out.
@bjornedyr-
5 жыл бұрын
@@HandToolRescue thats what it felt like they did. The cracking sound from my jaw really added the effect, haha!
Having done a 50lb little giant I can appreciate you project.
I can't explain how much i enjoy these videos!
@HandToolRescue
5 жыл бұрын
@Christopher Stout Yes...exactly.
Awesome looking forward to your "part 2"!!!
You set the standard for restoration.
@douglaslambert6109
5 жыл бұрын
To preficon of setting restoration!
@toomaskotkas4467
5 жыл бұрын
There are so many copycat channels on KZread now it's not even funny.
@littlemetermacgamer4011
5 жыл бұрын
Especially with the silence part. That is my favorite standard
- update - Just finished watching and not disappointed, even though it ended on a cliff hanger 😁 . So good to have you back man. To all you others out there, take note. No terrible techno music, or talking, or half hearted botch jobs, just the sweet sound of a Man and his tools at work.
How the spring mechanism for the hammer works was the only part I couldn't work out in my head. Still watched the whole video. Gonna look great when you're done.
Lead paint, asbestos brake shoes -- does it have any Radium on it?
@HandToolRescue
5 жыл бұрын
I should get a Geiger counter, just to check!
@buckbundy8642
5 жыл бұрын
Just as long as you don’t grind on or eat any of it you’ll be fine. 😉
@kiiiisu
5 жыл бұрын
@@buckbundy8642 or smoke :D
@WeirdHarold49
5 жыл бұрын
I think the asbestos is clutch shoes rather than brakes. Still potentially bad news.
@MoraFermi
5 жыл бұрын
If it had, it'd be long gone. Uranium hammer head, now that's something that would be interesting!
Love your hobby. Great vidros and superb results...not to mention getting these old and lovely machines back to work...
They really knew how to build things back then. Simple, efficient and solid enough to last for decades with no issues. So glad to see you restoring all these tools to their former glory.
I'M LEARNING ALOT CAUSE YOUR TEACHING IS ON SPOT
Just because there isn't a "Part 1" in the title, doesn't mean I'm not gonna try and NOT watch this until "Part II" comes out so I can watch it all at once. Spoilers: I watched it anyway, hurry up with that Part II.
Do you ever have to look back on your videos during the re-assembly process? So many different parts and pieces...
@HandToolRescue
5 жыл бұрын
Yes, all the time.
@stokeburner6730
5 жыл бұрын
I've always wondered that myself. Thanks for asking. lol I know I would have to.
@weezerfan999
5 жыл бұрын
When I do home repairs I will take a picture of what it looks like and then as needed through the process, masking tape and a sharpie are nice too if you gotta label, because sometimes I forget the damn order
There is nothing more satisfying than seeing decades of grime that looks like part of the machine "pop" off a bolt.
Old machines always are cool. That thing took some major casting.
"This guard prevents the spring from killing you" *Removes Guard*
Молодец!!!Руки у тебя от Бога!!
@SazanovDmitry
3 жыл бұрын
это автопереводчик не переведёт на английский из-за отсутствия пробела между предложениями. а автор -- канадец)
@user-rz9dk7wx7l
3 жыл бұрын
@@SazanovDmitry ну, главное переведёт слово Молодец )))
Really wanted to see the project completed. Left me hangin
What a stroke of good fortune to find a nearly 100 year old power tool that complete. Love watching this. Thanks for sharing.
you read my mind on width the power washer 👍👍. and i you ever sat your worktable on fire it would problely burn for a whole week !!! 😂😂😂.
@lukahierl9857
5 жыл бұрын
Just cut a bit out of the tabel and light it!
@tomtruesdale6901
5 жыл бұрын
I have always said that work bench is a "Super Fund" site
Waiting for part 2
I was thinking to myself "Dude, just use a pressure washer." When the "It's too cold" statement came up on screen. Glad to know we're on the same page, Hand Tool Rescue.
The amount of dirt on this must make it all the more satisfying to see this come back together to it's former full glory.
That gel looks more like cow snot
@chevellechris1
5 жыл бұрын
Came down here to comment ' I don't think I could use the Gel Remover, looks too much like snot ' XD
@fouroakfarm
5 жыл бұрын
Shhh don't give away the secret ingredient!
@andrewrobotbuilder
5 жыл бұрын
Good to know, I just hope I won't mix the two in the near future
5 жыл бұрын
Well, have you ever seen a rusty cow nostril?
@braydenh190
5 жыл бұрын
We all know what you wanted to say
Now there's a man who appreciates the value of greasy nuts.
@scottadler
5 жыл бұрын
"Greasy nuts" -- they must be made by hippies!
@gorillaau
5 жыл бұрын
@@scottadler nah... hippies try and use vegetable oil, it doesn't work as well.
@serenity6415
5 жыл бұрын
I saw the first 5 seconds of this and thought, this will be an innuendo-fest..
I watch these videos at 1.5x. Blows my mind!
Woah...this one I actually had to slow down rather than speed up! Was making me anxious and dizzy. A little too much caffeine this morning? LOL. Thanks for the great content. I enjoy binge watching.
That is an impressive looking machine. I was kinda worried when you had your face right next the that spring during the disassembly but figured if you were posting the video it didn't spring out and kill you. :-)
I've been waiting for another vid :D thx! loved your DIRESTA cameo when he was working on the canoe :p
Still can't figure out who would dislike these videos.
Not entirely sure why I find these so mesmerizing - after a long day of programming I seem to like nothing more than turning off the sound and watching these like a calming screen saver...
I would pay like $2 to be able to watch Wranglerstars face as he watches this video and watches the way you use a chisel! LMAO it would be priceless!
@HandToolRescue
5 жыл бұрын
There is just no better tool for the job...haha
@TheRocknRolla84
5 жыл бұрын
Hand Tool Rescue haha I know that’s right! 🤣
@RobbyJHope
5 жыл бұрын
That guy is a clown anyway.
@ianide2480
5 жыл бұрын
@@HandToolRescue I've been using wood chisels as scrapers for 30+ years. There is truly no better tool for the purpose. I think that some people don't realize that you don't buy the finest available chisel for this purpose. Just go buy the cheapest thing you can find, put a semi decent edge on it and you have a great scraper. My favorite use is for engine gasket removal, no struggling to remove stuck on material...
@ianide2480
5 жыл бұрын
@@RobbyJHope Clown would be an improvement....
I bet that bench top can burn for the whole winter :)
As a carpenter, watching you use a wood chisel as a scraper does pain me a little. Since I love the work you do and fantastic results you achieve I am willing to let it go. Can't wait for the next video.
@HandToolRescue
5 жыл бұрын
Hahaha. Everyone has a set of shit chisels. I am definitely not going to use my antique Stanley Sweetheart chisels on this.
The thing that amazes me most is that he’s able to remember where everything goes when he’s putting it back together!
As I'd imagine AvE would say...."Lotsa Shmoo!"
Got lead? Smoke 'em if you got 'em!
@tenshi7angel
5 жыл бұрын
This is why I go to the comments section. ❤️
I stumbled up-on part two, and it was so engaging I stopped the video and found part one, in order to soak up more of your knowledge!
@HandToolRescue
5 жыл бұрын
Haha perfect!
Watching your knowledge and techniques improve over the years has been enlightening. I always look forward to your next project.
Oh I like this one. Was the quarter inch thick casing of grime and dirt coating the whole thing what sold you on it? It's the adult version of a hatchimal. The mystery of what lies underneath was probably too much to pass up. I can't wait for the next part. Ps:this was one of those long ones that could have been longer☺️
@HandToolRescue
5 жыл бұрын
When I bought it, it was just a large stone. I had to chisel away like an archeologist just to get down to the castings.
"These holes are worn out" or as we say in the south "wallered out"
These videos should be required viewing in every school in the U.S.
It's so soothing watching you work. I must go now. Nap time...
What's the point of using it if there isn't a chance of spring death?
@HandToolRescue
5 жыл бұрын
I need to come up with a nicer looking way to not die.
@jonathangofast559
5 жыл бұрын
Brings new meaning to spring break
Awesome video again, sir. Question. What do you do with the tools that you restore? I can't imagine a power hammer would be a cheap purchase.
@HandToolRescue
5 жыл бұрын
Thanks! I am actually planning on selling this one! Want it? haha
@christopherdrzal3672
5 жыл бұрын
@@HandToolRescue If it's 35 bucks to ship a wrench here, I don't even want to know what it would cost to get a power hammer here.
@HandToolRescue
5 жыл бұрын
@@christopherdrzal3672 $35?! It's only $15 to ship a wrench. It's would probably be around $500 to ship this power hammer to the USA...
@christopherdrzal3672
5 жыл бұрын
@@HandToolRescue OOPS! My memory sucks. The wrenches were 35 bucks after Patreon discount.
@hemivivencia7670
5 жыл бұрын
I very anxious watching the next video!! Loves from Argentina 🇦🇷
The great king restoration is back.
Absolutely love these videos, can bring a day from bad to great just watching HTR disassemble and then completely rebuild anything. And yes as anyone who's ever smoked knows, lead paint is truly the answer to brilliant flavour
If you are wanting to sell this, you might consider contacting another KZreadr, Alex Steele. He's in Bozeman, MT, and seemed to be distraught about having to sell his Pilkington power hammer when he moved from the UK. He may be interested.
@ericsprado4631
3 жыл бұрын
Pilkingtons and the Star are worlds apart in style....I like both mechanical and the self contained hammers but There's something about running my old Star and Little Giants that just feels RIGHT somehow.
Nothing worse than having a worn out hole!
@ThomasBarone
5 жыл бұрын
Omg, llol!
@matthewsmith2592
5 жыл бұрын
So...how did your hole get worn out?
@tenshi7angel
5 жыл бұрын
Typically baby creating does this.
All the bearing surfaces on that bad boy are amazing
You know you have a well taken care of machine when the Babbitt bearings are as good as those are. Nice find.
1920 Color Palette: Olive Green & Black.
please do Any type of steam engine please.
I just wanted to say thanks for all that you do. When I’m having a bad day your channel lifts me up.
I have never seen any one work as fast as you, you are truly a great mechanic.
If there is such a thing as restoration porn... this is it.
@ThomasBarone
5 жыл бұрын
That's exactly how I explained it to my wife when she asked why I watch those stupid videos. Then I gave her a choice........ She chose the restoration videos.
@getyourkicksagain
5 жыл бұрын
ThomasBarone 😂 and that is why I don't give my wife a choice. The risks are too great! 😂
@29lookingood
5 жыл бұрын
🤤🤤🤤 Darn rooty tooty right. This channel the only one who does it for me. I'd break out my credit card to watch the premium Chanel 😂😂
@sexymonkeygod
5 жыл бұрын
So he would be the Ron Jeremy of restoration?
@jasonminion3129
5 жыл бұрын
Dont tell my wife!
Be careful with the paint stripper. You're ruining the patina on your workbench!
@lukahierl9857
5 жыл бұрын
No it forms part of the patina
Nicely done as always! Every time I see a similar channel you are the one I measure them against. Thanks so much for your humor and awesome videos!
Hand Tool Rescue: field-strips power tools, abuses actual hand tools. :) Got me on the edge of my seat waiting for reassembly. Filled with antici
@clydebalcom8252
3 жыл бұрын
Pation?
HA! foot..
Why did I watch this? I enjoyed it sure, but I still can't understand why i clicked on a video of an ancient tool being cleaned.
@HandToolRescue
5 жыл бұрын
Just accept it, haha.
@clydebalcom8252
3 жыл бұрын
Because you have a great respect for old machines?
@olivialambert4124
3 жыл бұрын
@@clydebalcom8252 I'm probably not the right person to be fascinated by tools. I don't think I could use even basic tools safely to be honest.
Brother, you're the king of tool and machine rescues!
Don't worry about my 100 year old tool that still works.... bet it needed some repairs here and there bit still worked. We can't get things to last more than 3 years these days! I do the same thing you do but for paying customers and there is no shortage of stuff to repair. Love the videos keep them comming. And thanks to evapo rust. Amazing product right there!!
How much coffee do you drink to move so fast?
@douglaslambert6109
5 жыл бұрын
Lol! Like that!
Some minor assembly required! 👍👍👍👍👍👍👍👍👍👍👍🤣🤣🤣🤣🤣🤣🤣
Awesome find. I’ll be looking forward to part two.
Heavy duty machinery. Thats next level!
Ewwwww, Evapo-Snot!
That..uhhh “gel” rust remover is a questionable looking substance..........
I’ve been in the process of building a power hammer. Seeing you disassemble one very much helped me. Subbed!
What a job. I was exhausted by the time you got that apart. Looking forward to part 2.
Looking forward to seeing the rest of the work!
Amazing job on the cleaning cant wait to see the restoration assembly
Awesome job of taking all the parts off the hammer machine an getting them cleaned for restoration. Can't wait for part 2.
Just purchased one of your wrenches. Keep the videos pumping out the videos, it's always interesting to watch you tearing into that old stuff.
I don't know if you are aware of the fact that you make the best ASMR to fall asleep to! Sooo relaxing! But i have to watch videos multiple times lol
I have the utmost respect for your courage to disassemble complex machines like that. I am always completely afraid I won't be able to put things back together.
Eric, this is your best work to date. Looking forward to the next video, thanks very much man!
Love your videos! Looking forward to part 2. Keep up the great work!
That's quite the work load you took on there, I applaud you because I definitely don't have the patience
sawdust was put into those old machines a lot of times for many reasons, it helped seal grease leaks, provided lubrication, tighten up worn shafts and clean out dirt and debris which helped it equipment like that run smoother. I worked for many years in an old saw mill where many old gear boxes with worn seals kept going packed with saw dust, grease and pure hope..
your videos are like Zen relaxation to me.. this one was worth like an hour of meditation
That's one massive job ahead of you looking forward to seeing part 2
It looks amazing all cleaned up! Great work
Jesus man. Unreal. This is gonna beeeee duh BELL OF DA BAAALLL. Cant wait to see part 2!!! Gonna be a sweet addition.
Gosh I love this channel. I had hit a wall on a project I was working on and now I am all motivated to go back out in the shop and finish it.
Can’t wait to see the finished hammer. Love your videos!
The sound effects make it so interesting, nice, like your videos, good lessons to learn
I want one. I'm trying to be a smith, and the first major tool, besides the anvil, is the Triphammer. My friend owns a working "Little Giant" and it is one SERIOUS time saver.
This is the largest restoration I have seen you do Such a lovely piece of engineering
Words can't describe how excited I am for part 2!