Soviet Chain Mortiser [Restoration] (Part 2 of 2)
Тәжірибелік нұсқаулар және стиль
This tool restoration was on a Soviet / USSR chain mortiser. I think it was made in 1973 by Electricgalvanic and has the model number IE-5601A. I do not know much else about this tool as most websites (which are in Russian) do not go into much detail. I believe the chain came in three different widths, and I have the 3/4" one. Most of the info is located here: stroy-technics.ru/article/ruch...
The restoration itself was pretty straight forward as only a few pieces were missing. I decided to paint the tool as some of the photos of this tool online show it painted and the person I was restoring this for asked for it.
In this first part, I disassemble, clean, and paint the chain mortiser. In part two I reassemble, make new parts, and get it running. This thing is a beast!
I'd like to thank Evapo-Rust for sponsoring this video.
Help secure more tools for future videos (if you want):
/ handtoolrescue
Instagram:
/ handtoolrescue
Facebook Group - Share your restorations
/ handtoolrescue
Reddit - Share your restorations
/ handtoolrescue
Пікірлер: 2 600
Классная работа.Когда автор подложил руку под молоток чтобы не поцарапать крышку ,я был в шоке. Видно что истинный любитель железа.В наш век гламура и маникюра такое редко встретишь
The minute you hammered your hand I knew you were a master at your craft. Well done.
Can’t stress enough how nice it is to watch this great work without annoying background music! Awesome videos man
1:20 синяя изолента! он знает толк в ремонте!
@BlackCat-we8co
4 жыл бұрын
какая то странная изолента, она прилипает к поверхности))))))
@sergstasov6485
4 жыл бұрын
Школа полуляха имеет международное признание)
@RusRecon007
4 жыл бұрын
Это синий малярный скотч, он из бумаги
@RradioActiV83
4 жыл бұрын
это лента маляров
@microflm
4 жыл бұрын
Не знаю... похоже он действует наугад. Дальнейшее использование термо-усадочной трубки и полное игнорирование чёрной изоленты выдаёт дилетанта )))
Рука вместо проставки, это сильно, мастер действительно "болеет" своим делом, мое почтение.
@vailrahmatulin
2 жыл бұрын
На голову он болеет.
@user-yh6dr9jn4x
2 жыл бұрын
Инструмент гумно
Очень грамотно и красиво преподнесено без соплей, всё лаконично. Спасибо!
Бить молотком по руке чтоб осадить крышку,это уровень ребята😁😁😁
@chesh1re-cat
3 жыл бұрын
3:50
@user-kx5xm6gt1f
3 жыл бұрын
Это суровый техасский рейнджер , у них там в прериях не ищут лёгких путей .
@chebotarlive8273
3 жыл бұрын
После ударов по руке , вконец перемотал
@cyberzx
2 жыл бұрын
@@chebotarlive8273 чел прикалывается. не надо тут ходить с такими серьёзными щами по интернету
The tool restoration system consists of two equally important parts: the wire wheel, which investigates the superficial products of rust, and the EvapoRust, which prosecutes its core. These are their stories.
@tomf3150
2 жыл бұрын
Dong dong !
@trapdoorguppi
2 жыл бұрын
Dun dun
@MrPossumeyes
2 жыл бұрын
Ta Dahhh!
Hi Everyone! There is still time to enter in the wrench giveaway: kzread.info/dash/bejne/hmt8p8iQYbvdnc4.html Don't forget the other wrench giveaway on Instagram as well: instagram.com/handtoolrescue/ I will post a video of the winners next week.
@ProlificInvention
6 жыл бұрын
*Hand Tool Rescue* Put me on the gauranteed huge list of people who would like to purchase your wrenches, your videos are epic entertainment.
@bartmcalister4957
6 жыл бұрын
What is the name of the song in that video clip made me spit my coffee out loo
@HandToolRescue
6 жыл бұрын
Vitas - 7th Element
@jackalqueenston1175
6 жыл бұрын
Hand Tool Rescue restaura um ventilador Arno artigo
@robadlers6668
6 жыл бұрын
You really have to watch that whole video. I laughed pretty hard seeing that you put it into your video. Well done. :)
Thanks for the video! "ИЭ" means "Инструмент Электрический" - Electric Tool. The following numbers are just model numbers. "ГЛ. ДОЛБЛ." - the depth of mortise.
Small detail here on soldering. For a wire like this you apply a bit of flux to the wire (if you don't have flux core solder). Then you put a *tiny* amount on your iron to help transfer the heat. Then you apply the iron to the wire and after the *wire*is hot enough you apply the solder to the wire and melt the solder into the wire.
Hand-Hammering techniques are really a lost art. Glad to see you're carrying on the ancient tradesman traditions.
Such a cool tool, but I just have one suggestion. Check out some soldering videos here on YT. Those joints were 100% cold with no real wetting of the copper. You're supposed to heat the wire with the iron, then push the solder into the heated joint. My only complaint with any of your wonderful videos!
@HandToolRescue
6 жыл бұрын
Haha yes. I explain in another comment why the soldering was all poopy, basically the iron kept cycling on and off for no reason.
@DuBheasaFilms
6 жыл бұрын
Dylan Headrick also flux helps the solder flow into the strands.
@froggofrankie
6 жыл бұрын
Reminded me of Big Clive's "Tigging" kzread.info/dash/bejne/oIyfsdqJZcvRkZc.htmlm40s
@marekant7776
6 жыл бұрын
Joey DeCrescenzo additional flux is not needed for soldering like that
@thefire226
6 жыл бұрын
haha yes I remember that video
I just love watching you restore and put new life back into old objects. Congrats - once again - outstanding job.....from the middle of California, sign me another fan.
@HandToolRescue
6 жыл бұрын
Thank you!
@askarov9545
6 жыл бұрын
Аика кино
@askarov9545
6 жыл бұрын
Kayinfs наo Here
The thing that amazes me the most about your projects is how you can put everything back together with no leftover parts and it runs. That is something I have a hard time doing except on computers. WOW!!!!
Молодец Товарищ ! Партия Вас не забудет !
@alexeevkesha6379
4 жыл бұрын
Поддержал и подъебал 🤣👍
@dandare2696
4 жыл бұрын
... но и не вспомнит!
@user-sj9jy5dv2m
4 жыл бұрын
@@dandare2696 пока ты ей не понадобишься....
@Stepan_Andreevi4
4 жыл бұрын
ТОВАР ИЩИ!!!Кричяли большевики-комунисты, грабив народные комори и товарняки.
@valentinn5313
4 жыл бұрын
@@Stepan_Andreevi4 ты тупой? Как пробка?
История и путешествия этого аппарата наверное тоже очень интересна 🐾
@Anbjei77
2 жыл бұрын
Я тоже подумал про это. )))
В 73 году мне было пять лет.))) Жил я себе и не знал, что где-то делают такие инструменты. А через 48 лет один парень, кажется из Южной Америки, будет этот инструмент реставрировать, а я буду смотреть.))) Как всегда, великолепно. In 73, I was five years old.))) I lived for myself and did not know that such tools were being made somewhere. And after 48 years, one guy, it seems from South America, will restore this tool, and I will watch.))) As always, great.
Beautiful paint and brilliant workmanship! It looks like a piece of art!👍🏻❤️😊🛠🎨
I am always amazed at your knowledge and quality of craftsmanship. Spot on every time. Thank you.
I'll have to watch this a second time. I never recovered from the intro.
@azyfloof
6 жыл бұрын
I had to go *back* and Shazam the intro to find out what the song was! xD
@TheNevada666
6 жыл бұрын
no need, its 7 element vitas
@azyfloof
6 жыл бұрын
Yep, Shazam found it :D cracking song!
@vandyFixer
6 жыл бұрын
Come for the hand tool rescues, stay for the comments.
@dvasymmetry9696
6 жыл бұрын
I can only watch once, because of the intro...
The guy who invented this: "Why waste my time using a chisel and hammer to make this mortise when I have a perfectly good chainsaw sitting in the garage"
@user-tq7vi5bi6p
4 жыл бұрын
6
@buggerlugz6753
3 жыл бұрын
Yeah, and nowhere near as dangerous either! :P
My friend, I admire your work and your videos: Clean, nice shots, no silly music, and no dull time, as you accelerate the speed of them, this one in particular is fantastic. One constructive comment I can add to is about the soldering when you were making the cable longer. Next time, try to heat the wires with the tip of the iron (with only a tiny bit of solder in it), and then pour solder into the wires, it will work like a charm as the resin or flux will make your life much easier ;) Keep up the great work!
@michaelskinner896
2 жыл бұрын
Took the words right out of my mouth. That solder joint is cold, unfortunately. Hopefully, the shrink tubing will help hold it, but if it were me I'd redo it.
That thing is a beast. It came out looking great and seems to work even better.
Nice touch cleaning that one part with the Russian water.
@andrewcole9440
6 жыл бұрын
NOCAREBEAR Smirnoff is made in Connecticut.
@constateam
5 жыл бұрын
Смирновка из Конектикута )))) чистит неплохо
4:24, перед звездочкой в первой серии была шайба ограничительная, собрал без неё
@TheHipocrit
2 жыл бұрын
xaxaxaxaxaxaxa
@nikto_ne_
2 жыл бұрын
👍 тоже заметил
You are a true poet and master. Congratulations on your work, it is inspirational.
Your second best opening…. Back to back best opening from 4years ago. Finally got it right. Great stuff man keep it coming!
Respect the completion!
@HandToolRescue
6 жыл бұрын
Don't tell me what to do...
Most of my life passed in the USSR and I happened to deal with a similar tool. Nostalgia. The design style is very familiar and it was fun to watch how a foreigner sometimes thinks. In general, I did everything right. You are hero! Thank. P.S .: Cover latch made of very thin elastic steel, the outer edge is rounded.
@mwilliamshs
4 жыл бұрын
Elastic steel? I'm listening.
@Ragnar8504
3 жыл бұрын
@@mwilliamshs I suppose he meant springy.
@theghostofthomasjenkins9643
3 жыл бұрын
it's a good tool, not something you'd expect from the soviet era.
@user-sl3il5sz2s
3 жыл бұрын
@@theghostofthomasjenkins9643 You underestimate the Soviet era, there were a lot of really good instruments during this period. The style of Soviet instruments was distinguished by its roughness but high strength and reliability. And such a tool is highly appreciated, I have many such tools made more than half a century ago - everything is perfectly fine. Not just a tool. My friend has a ZiL refrigerator which has been operating continuously since 1956. During this time, only the lock was repaired - the steel door latch was slightly worn out. And the paint turned yellow.
@theghostofthomasjenkins9643
3 жыл бұрын
@@user-sl3il5sz2s it's not me that is underestimating it. there is a lot of soviet era stuff that has not stood the test of time. so much of it was repaired through the years with jury rigged parts that they don't really hold up. a lot of it was also made with what was at hand, and while durable and functional, it wasn't exactly practical. when i say this is a good tool, i mean it's something you can still use today with little worry (except for the wiring, in this case). it also still runs extremely well with little wear.
Your checkered shirt has already become a brand. It looks like you can fix it with anything. And your smile gives you a positive attitude and good mood. I’m watching your channel with pleasure. Good luck
Love what you do and how you do it! Great job on restoring old tools.
@HandToolRescue
6 жыл бұрын
Thank you!
I love when I don't understand how or what an entire tool does until you put the entire thing back together and I suddenly go "OH MY GOD, IT'S MORTISING. WITH A CHAIN. OF COURSE!"
@simonbrooke4065
2 жыл бұрын
It's A LOT quieter than the modern Makita ones we use for timber frame construction! Not quite so precise, but then it's old. Perhaps the primitive Soviets never discovered how to make motors noisy, like proper capitalist motors?
@user-wz3yw5su9c
2 жыл бұрын
Ф1
@user-wz3yw5su9c
2 жыл бұрын
Йф1
@user-wz3yw5su9c
2 жыл бұрын
Ффф
@user-uz8vv1ou9s
2 жыл бұрын
@@user-wz3yw5su9c of
Эл инструмент назывался "электродолбёжник". В комплекте было 4 шины и 4 цепи от 8 мм до 20 мм. Было очень удобно 15 мм цепью за 2 прохода делать отверстия в дверях под замки.
@efimkrivov
5 жыл бұрын
Подозреваю, что смертный такое купить не мог
@animussilica2606
5 жыл бұрын
ефим кривов да не, вполне мог. Редкая просто машинка.
@user-gc6mt5sg3y
5 жыл бұрын
просто в большинстве своем народ отверстия под замки обычным сверлом делал и потом стамеской обрабатывал.
@cnc_vivisector3881
5 жыл бұрын
Animus Silica : Сильно сомневаюсь, что мог. Машинка советских времен. А в те времена даже более-менее ширпотребные электродрели серии "ИЭ" (читай, как "инструмент приличного качества", а не маломощное и ненадежное бытовое говнище серии "БЭС") в магазинах было почти нереально увидеть. Не говоря уже о профессиональном инструменте, не из группы "товаров народного потребления"... В общем, купить-то было можно, если задаться целью. Но из-под полы, украденный со стройки или с фабрики. В розничной торговле не найти, и напрямую на завод-производитель тоже не обратишься - с физлицами советские заводы не торговали...
@efimkrivov
5 жыл бұрын
@@user-gc6mt5sg3yя всю жизнь только стамеской долбил))))
That thing is engineered like a tank. Lovely job restoring it.
I'm Brazilian ... Congratulations, wonderful work ... (parabéns).
I have been watching these videos for Hours, Brilliant
Видимо автору понравился Витас.)))
@itogi
6 жыл бұрын
ник ники Кому не нравится Витас?
@videograph2697
6 жыл бұрын
Единственный, кого автор нашёл из российских исполнителей...
@domeatown
6 жыл бұрын
I'm not Russian and my whole family loves that song. He has a talent that crosses borders and cultures and languages!
@Bisbender
6 жыл бұрын
Lmao
@myxa_6617
6 жыл бұрын
Все просто. Превью в начале ролика о проделанной работе: я сделал то, я сделал это и т.д. (на английском - etc., в разговоре - bla bla bla, что и напоминает песенка Витаса :)
The way you do the things so as to save the things from damaging is nice
Мужик тебе действительно спасибо за такое видео и за реставрацию станка молодец
You can make a lot better solder joints if you use the iron as a heating element rather than an applicator. If you touch the iron to the wire then apply solder at the same time the solder flows into the joint better rather than just coating it. Cool video! Keep it up!
Когда РАБОТАЕТ МАСТЕР слова не нужны!! КЛАСС!! УСПЕХА!!!
You know a video is going to be good when it drop a Vitas reference straight off the bat 😁
Por dios no podés soldar así , tantas cosas buenas que haces pero soldar así se me cae un idolo
Just imagine the sheer volume of tables and chairs you could crank out with this beast!
Cool piece, nice work sir
@HandToolRescue
6 жыл бұрын
Thanks!
You are incredibly talented and comical. Love the vids
Hands down my #1 favorite restoration youtuber I’m subscribed to 😂😂
I was dying when you started hitting your hand
@billsargent3407
6 жыл бұрын
In Soviet Russia hands are stronk!
@HandToolRescue
6 жыл бұрын
Don't die.
@paulshewmaker4568
6 жыл бұрын
Seconds before hammering your hand I was saying oh don't use your hand as a hammer, then... dry dry dry humor comrade.
@dennismuir9957
6 жыл бұрын
I was just glad to see I'm not the only one that does that
@Bill23799
6 жыл бұрын
In Russian hand does not hit hammer....hammer hits hand.
спасибо за сохранение Советской реликвии, мы также бережно будем относиться и к вашему инструменту=)
@olegdnepr
6 жыл бұрын
Андрей Зорин, конечно будешь, потому как на всех заводах России стоят импортные станки. Своего то ничего нет...
@user-mt9vg4py1n
6 жыл бұрын
Олег Днепр Не переживайте за Россию, у нас разные станки . Думайте о своей стране .
@olegdnepr
6 жыл бұрын
Андрей Сумберт, а мы вот с момента предательства нас Россией в марте 14 года очень за нее переживаем, и прилагаем все силы и всячески способствуем что бы предатели вернулись в совок и стали за железным занавесом от цивилизованного мира. А по поводу станков, то какие они у вас разные? Не импортные? Не с импортным программным обеспечением? Калины, МИГи, асфальтоукладчики, аппаратура в больницах, телефон или планшет с которого ты сейчас это читаешь, телевизор у тебя дома, чайник, стиралка, оборудование в тяжелой промышленности... А ну приведи пример, император, что вы производите чисто сами без вмешательства технологий загнивающего запада? Может у тебя часы на руках производства россии? А может у тебя одежда отечественного производства и она сшита не на импортных швейных машинках? Что конкретно САМОСТОЯТЕЛЬНО производит сверхдержава россия которая америку в пепел...?))) Удиви меня.
@user-mt9vg4py1n
6 жыл бұрын
Олег Днепр Человек , который пишет название страны с маленькой буквы... Дискуссия не имеет смысла.
@user-mt9vg4py1n
6 жыл бұрын
Олег Днепр О , чем можно говорить с тем , кто , как фанатик живет в заученных и придуманных другими фразах и образах ? Включайте собственный интеллект , избавитесь от эмоций и спокойно задайте себе вопросы и также без эмоций расуждайте . Если у вас хватит духа и воли , так поступить , многое вы увадете в другом образе . Самое главное расуждайте без эмоций . Чистый разум .
То как он подточил цепь меня реально улыбнуло! Не подточил, а закруглил и затупил!
If Norm Abrahams had his tv show in the 1950s he would definitely have this tool! Great vid as always!
Так понимаю этой приблудой замки в дверях врезать. Работа отличная!
Отличное видео. Спасибо, Вам ) Только кабель так крепить нельзя (5-31). Опасно. Возможно короткое замыкание. Надо за наружную изоляцию (черную).
@philipmihailov
6 жыл бұрын
I also think that soldering was not proper. This is "cold" soldering, that can give problems in the future. The proper way is to apply so much heat that solder liquefies and flows through whole joint by capillary force. I think that probably soldering iron was too weak or too cold for this work. But restoration was very good otherwise/Я тоже думаю, что пайка была неправильной. Это «холодная» пайка, которая может дать проблемы в будущем. Правильный способ заключается в том, чтобы нанести столько тепла, что припой будет разжижаться и течет через весь сустав капиллярной силой. Я думаю, что, вероятно, паяльник был слишком слабой или слишком холодной для этой работы. Но восстановление было очень хорошим, иначе
@videograph2697
6 жыл бұрын
Там русский, прорезиненный кабель - ему пофиг!
@GOGOLbMOGOLb622.
6 жыл бұрын
VideoGraph Советский вообще-то
@JGnLAU8OAWF6
6 жыл бұрын
Philip Mihailov, this is not a cold solder joint, there just wasn't any flux at all, so solder didn't flow into the wires.
@user-ni1wp6lv1g
6 жыл бұрын
vovchiklj43 и так сойдёт )
Пила -зверь!Ни одной пластиковой запчасти-всё сделано из качественного металла!
@ruhisky682
2 жыл бұрын
Это не пила,электродолбёжник пазов,рабочий орган у ней фрезерная трёхрядная цепочка.
awesome as always, good job on the door latch, wondered how youd replace the wire lock. these videos are so relaxing keep them coming
Well worth the wait !..
@thisguylovebananas
6 жыл бұрын
Chester Draws yup!.
That soldering job. It helps a lot to pre-twist each wire, then twist them together (inline). Also, try holding the iron tip on the wire, then apply solder to the tip and wire together. If solder is applied to the iron by itself, it burns off all of the flux, which will prevent the solder from wicking into the wire. Also, you'll want to hold the iron on the wire for steady heat rather than poking it.
What a cool machine! Been woodworking all my life and never saw anything like it!
@_ninthRing_
4 жыл бұрын
Really? I thought it resembled an early version of a *Biscuit Joiner.* I could see this being useful in connecting wide, thick planks of wood together for the top of an industrial workbench.
Fico impressionado com as máquinas raras que você restaura!
An amazing example of Russian engineering. It is amazing how quiet it runs. You'd never get me to use one... it looks dangerous just sitting there. Great video!
@jankrusat2150
2 жыл бұрын
Makita still makes similar machines today.
Молодец мужик. столько труда !!!
That's the best one yet. I've been binging for days now. Great work.
@HandToolRescue
6 жыл бұрын
Paddypool FC Thank you! Welcome.
@paddypoolfc3579
6 жыл бұрын
Hand Tool Rescue . Thank you. Love you channel.👍🏻
Never knew I needed these kinds of videos in my life.
No offence meant with this, but I wouldn't trust that solder joint for a second. You need to use the iron to heat the target you're about to solder (preferably from the bottom) and then push the solder into the heated object (from the top side) and it'll flow around and make a very good bond. when it's flown and there's enough solder, you remove the heat. A good joint is shiny, almost like a mirror. What you created wasn't soldered as much as mechanically tacked just enough it might have seemed to be connected but it'll break faster than you can get on to the next project.
@HandToolRescue
6 жыл бұрын
Yes, the wetting wasn't happening because the iron kept cycling on and off for no reason, so I couldn't get the wires hot enough. I'm definitely buying a new one, haha.
@steamfire
6 жыл бұрын
Hand Tool Rescue you need to resolder that connection ASAP when you get a new iron. Otherwise it's going to catch on fire, or even worse, melt through the heat shrink tubinh and short out to the chassis, which can electrocute you.
@JGnLAU8OAWF6
6 жыл бұрын
Chassis is grounded so this is not that bad.
@gazza116
5 жыл бұрын
yes it was a dry solder joint.
@TheMetheman1
5 жыл бұрын
in mother russia this is aprroved method, dos vidanya
В наших поликлиниках аппендицит так чисто не вырезают !! Молоток , Чувачище !!
le meilleur restorateur que j'ai jamais vue , bravo
классный инструмент и классное восстановление!
отменная работа!!!!!!!!!!!!!!!!!!!!!
WOW my brother I've never seen something like that in my life,Awesome restoration you are a master later bro :)
Turned out amazing!
Bravo! Great tool restoration.
Читал про такие , но в живую не видал , думал что это не существующий проект . Вижу что ошибался . Лайк !
@deeplogging2103
5 жыл бұрын
Таких инструментов навалом. Мне тесть рассказывал, типа чтоб их домой не тащили с производства, они были так хитро сделаны, что дома их решительно невозможно использовать. Питались они от слаботочного высокочастотного (или низкочастотного) трехфазного трансформатора. Но старый таки упер и приспособил подобный девайс на циркулярку один и на шкантоверт другой. Все трое и поныне в рабочем состоянии))).
@cnc_vivisector3881
5 жыл бұрын
Farming Simulator 2015 Gold edition : Высокочастотное питание (3 фазы 400 Гц) в индустриальном электроинструменте (электропилы, дрели, шлифмашины и т.д.)используется с целью уменьшения массы и габаритов электродвигателя, дросселей, трансформаторов... И лишь в самую последнюю очередь - "чтобы домой не тащили". В авиации, кстати, питание переменным током 400 Гц распространено еще больше, по тем же самым причинам.
@deeplogging2103
5 жыл бұрын
А как в домашних условиях такую машину запустить?
@cnc_vivisector3881
5 жыл бұрын
Farming Simulator 2015 Gold edition : Если, как в этом видео, трехфазный мотор с _линейным_ напряжением 220V (фазное 110V) - то через любой частотный преобразователь подходящей мощности. Собственно, автор данного видео именно так машинку в работе и проверял. Бонусом будут электронная защита от перегрузки, плавный запуск и возможность регулировки оборотов. Хотя и не сказать, что это "халявный" вариант - готовьте довольно-таки приличную сумму (как минимум 5-10 тысяч рублей, в зависимости от требуемой мощности) на "частотник". С трехфазными моторами на 380V в бытовых условиях всё несколько печальнее. "Нищебродский" вариант с конденсаторной схемой - крутиться будет, конечно, но в мощности много потеряет (а в ручном электроинструменте моторы без избытка мощности конструкторами заложены, чтобы он не стал неподъемным). А "частотник" в этом случае не поможет - не существует более-менее доступных моделей, которые питаются от 1 фазы 220V, а на выходе дают 3 фазы 380V. Разве что использовать достаточно мощный повышающий трансформатор 220/380, от которого запитать "частотник" - но в этом случае не только цена решения заставит поморщиться, еще и с мобильностью инструмента проблемы будут. Если конструкция двигателя позволяет - можно попытаться перемотать его на однофазный (с фазосдвигающим конденсатором), под питание от бытовой сети.
@deeplogging2103
5 жыл бұрын
Есть двигатель от какого-то размыкателя. Его можно перемотать на 220?
вспомнил молодость. был аккорд: ставили дверные замки в новые полотна, в пансионате одном. брали такую машинку за магарыч. только цепь смазывали парифином. все тогда перепробовали, однако самый лучший результат дал именно парафин. вообще автору респект большой!
@Vitalii193
5 жыл бұрын
Лучший вариант даёт воск! Парафин суховат! Токаря тоже пользуются для резьб натуральным воском! Закупаем в пчелоконторе!
@SomeRandomPerson163
5 жыл бұрын
Воск/парафин еще хорошо идет для смазки подошвы рубанка ручного или пилы.
Very nice and precise work.
Siga asi demostrandonos aquellas herramientas utilizadas en la ex Union Sovietica. Felicitaciones!! Desde Ecuador.
автор реально профи, залипаю на такие видосы 👍👍👍
if all these "restoration” channels would work as painting conservators they would start by picking the frame apart and sandblast it, remove the canvas, cut of all the broken bits and stripp the paint of. in the end they would “fix” it by spraying it with a bunch of metallic spray paints. Although this channel is pretty good :)
I never knew such a tool existed until I saw this thing working and was like "so that's how you make rectangular holes really quickly"
Scary tool with no guard. Great restoration!
*Hand Tool Rescue* Been waiting for this! Excellent video as usual. Where would I buy a wrench like the one in your video (the one that you made?)
@HandToolRescue
6 жыл бұрын
They will be for sale soon on my unreleased website.
@ptonpc
6 жыл бұрын
He has them for sale on his Instagram page
Great restoration! Love your channel. Some recommendation. Always clamp down a cable on the outer insulation. Pinched cables may start to leak current over time. If the cable was molded in the grommet, you could use an extra sleeve over the cables before clamping them down. Be careful when using VFD on old motors. Older motors usually do not have the proper winding insulation to work with VFD's. This becomes worse when you apply long cables, but your cable was short so that is the best possible case. Secondly, the motor cannot cool itself as efficiently when run at slow speed but this was not the case here.
Excellent work, well done.
I'm surprised copper core didn't need replacing nice job on restoration keep the funny bits in video coming
Спасибо, что изолента синяя
@kryakozavr2104
4 жыл бұрын
Это не изолента, это защитная лента - blue masking tape - Используется при окраске для защиты поверхности не подлежащей окрасу.
@Tantejay
4 жыл бұрын
Почему синяя изолента так важна?
@kryakozavr2104
4 жыл бұрын
@@Tantejay Как почему? Синяя изолента символ надёжности СССР.. все что примотано синей изолентой, держится веками, как это ни странно..
@Tantejay
4 жыл бұрын
@@kryakozavr2104 Ну, я могу легко поверить, что после того, как у меня был Москвич - когда я был молодым;)
@Tantejay
4 жыл бұрын
@@kryakozavr2104 Я, кстати, немец :)
Clean holes are the best holes.
@HowToTutorialHelp
5 жыл бұрын
It’s a clean front hole
Good job! Nice choice of color too.
O melhor. Todas as restaurações, perfeitas
Здравствуйте! Это цепной долбёжник на 36 В. 3-х фазный.Были электрорубанок , шкантёр и что интересно, заточной станок для ножей сенокосилок.Это всё что я встречал в своей жизни. К нему обязательно нужно понижающий трансформатор 3-фазный с 380 на 36 В.Очень интересные видео показываете! Мне нравится! Спасибо!
@sarcasticat
6 жыл бұрын
Наркоман штоле? На бирке белым по черному написано: 3~50Hz 220V
@DmitriyShum
6 жыл бұрын
Все равно трансформатор требуется, трехфазную сеть на 220В как то не встречал.
@sarcasticat
6 жыл бұрын
DmitriyShum были когда-то очень давно в союзе 220/127.
@DmitriyShum
6 жыл бұрын
Были, в прошедшем, стояли на телеках да радиолах переключатели сетевого напряжения, а на данный момент нет.
@thunderblade9245
6 жыл бұрын
Частотника 1 фазного достаточно , + регулировка оборотов , включить в домашних условиях не проблема такую машинку , и 3 фазное 220в 50гц , применялось раньше для инструментов при работе во влажной среде и т.п. с развязкой от сети на трансформаторах типа ТСЗИ 380/220в
What do you do with the tools you "Recycle"? Do you keep 'em ? Nice work anyway...…..subbed.
that's a very useful and dangerous tool, nice restoration!😁
I am stunned by Soviet Mechanical Engineering. Most products are designed and built to be purchased once and provide nearly a lifetime of service with regular maintenance. The key design elements are just brutally simple. Case in point, look at how many Lada's are still roaming around Russia and former Soviet countries.
This build just (K)eeps (G)etting (B)etter
@HandToolRescue
6 жыл бұрын
Haha
@arturomolinacabrera2824
6 жыл бұрын
Jonny Builds 9 p
@user-lr9ux8wl7i
5 жыл бұрын
Go to Guantanamo !
@phishguy5230
5 жыл бұрын
(KGB) Knock knock! (Anon) Who’s there? (KGB) WE VILL ASK ZE QUESTIONS
@shukranisibale1739
5 жыл бұрын
KGB ha hahaaa
Great video as usual. For some reason, I read that as, "Chainsaw bear grease." and got a visual image of a Grizzly dual wielding chainsaws. I think I need to go to sleep.
@DUxMORTEM
3 жыл бұрын
Me too, but seeing as the reason im watching this is due to my chronic insomnia, i might need help...
Essa máquina ficou nota 10...👏👏👏
Think I just found my new favorite channel
Прекрасно👍
21:33 На ноги с пружинами летит стружка. Если подойдет - можно попробовать на "ноги" надеть гофрированную шлангу от советского противогаза (будет как пыльник).
A hint for soldering .... put iron on one side of wire and soldering wire on the opposite side. It's much easier and joints will be solid ;)
Отличный канал. Автору респект 👍👍👍