El producto de SONAX es un poco mejor, casi iguales en cuanto a aplicación y propiedades, pero si considerámos que su botalla contiene 25% más producto y cuesta 20% menos que el Quik Detailer de Meguiar's pues el resultado es contundente.... Saludos desde San Pedro Cholula, Puebla, México.

Awesome buddy but can't pick a clear winner they are both great just like the video

@detailingdiaries6562

7 жыл бұрын

Thanks 👍

sonax połowę tańszy a efekt taki sam ;))Wielkie dzięki

The diff is that sonax doesn’t use silicone and lasts weeks where the megs last a few days

@detailingdiaries6562

6 жыл бұрын

toto wolf did you watch until the end to see the durability part?

@totowolf9716

6 жыл бұрын

Detailing Diaries apparently not

I've been using Sonax BSD for a couple years now and is a wonderful product with very good longevity for a QD.

@muhammadarfan7113

5 жыл бұрын

How long would it last you ?

BSD for me. It was fortuitous that it rained as you applied it because it works better with a small amount of water than neat! Many use it 50:50 to help with slick application and Brian at Apex Detailing even recommends using it 5:1 as a maintenance product. Try using BSD as a top layer on top of Sonax Net Shield then Sonax Spray and Seal. Apparently it's as good as a light ceramic and will give a year or more protection when maintained with BSD. Apex have made a video of that exact triple system.

I have a real problem applying the Sonax BSD, I've been washing, polishing and waxing cars for decades but I find this stuff a real pain. It's grabby and not very easy to take off, plus it leaves a blotchy finish, when I stand back I can clearly see an uneven finish on the paint work even though it's been applied and removed evenly.

awesome video...the beading was much better on the left side...

super video

Good vid. Thanks for the in-depth comparison. Would like to know how my go to QD, AG Aqua Wax compares to these two. Thinking of trying BSD next though, heard a lot of good things about it and you didn't find it grabby either.

@detailingdiaries6562

5 жыл бұрын

No I have never found it grabby at all, but I think those who do find it grabby is when its on hot days and in direct sun. In those conditions the paintwork can get very hot and I guess it flashes off too quickly. In the UK it doesn't seem to have much of a problem. The other thing about BSD is that it's SO cheap. From Carparts4less I was able to get 2 bottles (1.5l total) delivered for something like £13. Megs is probably closer to £16 for 700 or 750ml.

@chillisauce6079

5 жыл бұрын

@@detailingdiaries6562 Thanks for the reply mate. I never wash in direct sun so hopefully it will lay down ok. What was the long term longevity like, sometimes I have to go 6 weeks between washes, do you think it will last this long? It will be used as a top up wax on top of BH Double Speed wax which I have been impressed with btw. One last question if I may, I like the idea of putting QDs on at the drying stage and AG Aqua Wax is designed to be used this way. Do you know if BSD can be used like this on a wet car? Thanks.

Hi, I hope anybody can support me. My car has the SONAX Profiline Ceramic Coating cc36 and I'm looking to extend the water repelent feature and keep the shine after weekly wash without affect the coating. I have used the Meg's Ultimate Quik Detailer for many years but I'm affraid to use it because it's a different brand product. Do you know if using this Meg's Detailer can affect the coating or it will better to get the SONAX Detailer to do it? Seeing this video it's shown both are good products but don't know if the ingredients used in Meg's could drop the ceramic coating. Thank you in advance.

Ultimate Quik Detailer instructions say to wait for 12 hours for the polymer crosslinking to set. Leaving it in the rain right after application doesn't seem like the best test.

@detailingdiaries6562

6 жыл бұрын

raksh9 interesting, it doesn't say that on my UK bottle, which country did you get your bottle in? Unfortunately I don't have anywhere else to detail my car, so it's up to the elements if the car gets wet or not. I hope you enjoyed the video.

@RnBGarvey

2 жыл бұрын

a qd needing to cure is ridiculous

BSD every time for me, what's the cost comparison? Mega alway seems a bit more expensive? Good test tho m8! 👍

@detailingdiaries6562

7 жыл бұрын

Dave Puffett I think the Megs is about twice the price of BSD as you can often find BSD heavily discounted

which one better?

@detailingdiaries6562

7 жыл бұрын

tevfik tüzün some people say the Sonax isn't good in hot conditions, but it wasn't hot during this test

Youll find Sonax makes scratches worse looking as it has cleaners, yet looks much much more glossy and water repellant. Their wax is the same, its mental as a sealant but your paint has to be spot on else it shows you its flaws. Ive since gone back to meguirs ultimate polish and nxt 2.0 as it hides everything, perfect for daily drivers

@RnBGarvey

2 жыл бұрын

try sonax cleaner wax.

The left one !!

The tape won

no difference - can anyone justify choosing one or the other?

@detailingdiaries6562

5 жыл бұрын

The spray head is better on Megs, but the price of BSD is around half as much. I just decant BSD into a better bottle.

you cant prepare this two products, Meguiar's ultimate Quick detailer is a cleaner for light pollution product without any wax. The bsd is a wax detailer!!

@RnBGarvey

2 жыл бұрын

you just said the same thing two different ways

Sonax bsd vs ultimate fast finish meguias??

@detailingdiaries6562

5 жыл бұрын

I've not tried Fast Finish, have you? It seems more of a spray sealant, rather than a quick Detailer though.

@antoniomartins7800

5 жыл бұрын

@@detailingdiaries6562 sonax bsd x ultimate fast finish meguias, your favorite?

@detailingdiaries6562

5 жыл бұрын

@@antoniomartins7800 I haven't tried Ultimate Fast Finish.

@juanjovillafana8954

5 жыл бұрын

Hi Antonio..... Not it's the same products. Polimer Net Shield by SONAX VS Ultimate Fast Finish by Meg's 👍👍👍 Saludos desde San Pedro Cholula, Puebla,México.

This is ridiculous bro. These are DETAILERS products. These are designed for gloss appearance not protection. Use a wax then you use a detailer afterwards. And they are both great products. It just you own personal preference. I would sonax was better in this video..

@RnBGarvey

2 жыл бұрын

bsd is more about water beading than gloss .

never in circles

@pawebarwinski2453

7 жыл бұрын

Why not?

@TheRealEdSmall

7 жыл бұрын

because it introduces swirls/micro scratches. Going in straight lines is best as those micro scratches are far less noticeable.

@chiggenwings

7 жыл бұрын

And straight scratches are easier to remove than round or curvy ones.

@detailingdiaries6562

7 жыл бұрын

chiggenwings the scratches are usually straight, it's just the way they reflect around a spectral highpoint it makes them look like they are in a circle

Megs takes 12 hours to cure

@detailingdiaries6562

4 жыл бұрын

According to whom? 🤔

@russellparker4568

4 жыл бұрын

@@detailingdiaries6562 the instructions on the back of the bottle 😉