Finally got some footage of the CS1-12 being fired.
Жүктеу.....
Пікірлер: 29
@giggergigger14 жыл бұрын
and you still have all your fingers good job! glad you upgradsed that barel, the shotshell can produce 11500 psi presure for a standard 2 3/4 inch 12 ga shell
@yo.mama1005 жыл бұрын
Brennan you should make a break barrel single shot 12 gauge based on the Orien flare pistol except made out of metal instead of plastic obviously
@anantavideogohain99057 жыл бұрын
amazing the cartridge hit fireing pine
@RandomGuy97 жыл бұрын
It looks really cool.
@Fairfax_kit
7 жыл бұрын
Thanks!
@carlosvergara36907 жыл бұрын
it look's pretty good ,but i have a question,it is actually acurate with a scope ,just asking because i'm building my own ;)
@p1stolp.5217 жыл бұрын
bad ass home made shotgun I've seen so far..
@Fairfax_kit
7 жыл бұрын
thank you!
@l3MTA3l Жыл бұрын
Instead of pulling the spent shell out to reload, just flip the barrel and load it from the muzzle. The muzzle now becomes the breach. It will push the old shell out when you fire it, then repeat and load from the muzzle
@dardaddy27607 жыл бұрын
hey bud.nice job..after watching lots of home builds im doin my own.will upload my build and test also.👍🔫👊👊
@Fairfax_kit
7 жыл бұрын
Badass, brother! Looking forward to it.
@GEAUXFRUGAL7 жыл бұрын
Why don;t you fire a shot place a shell in the end and turn it around and fire a shot to eject the spent round?
@Fairfax_kit
7 жыл бұрын
I actually did, but the footage of it got lost at some point :(
@corycas72956 жыл бұрын
Hey would n e body answer question will the little basin bird shot stop intruder over 250lbs in your home? Or do I need 9 pellets federal TEACH ME PLZ! But nice job bro I couldn't get my slam 3/4 and 1" slide so freely guess need sanding machine if I want to make one
@sdmfbastard
5 жыл бұрын
Cory Cas grinder or find one that fits. bird should but buck shot will 100%...birdshot won't go through walls and hit other ppl though
@levilopez9264
5 жыл бұрын
Bird shot through a full choke will make hamburger out of anyone.
@giggergigger1
4 жыл бұрын
@@levilopez9264 i sincrely hope no one tries to make a ful l choke on a slam fire shottie!
@giggergigger1
4 жыл бұрын
form typical HD range of 5 yards, 400+ pellets of lead in the face area i think would stop any1 in their tracks
@ThatEsepe2 жыл бұрын
I bet it's heavy
@larrynewingham14947 жыл бұрын
👍
@dema83176 жыл бұрын
Hey brudda!It's the dude with the retained barrel slam (Las Vegas)dude I just uploaded a better vid of that slam fire.Tell me if this design holds eater or,it's gonna go flying out of my hands in about 4 to 5 pieces?Hehe!Seriously tell me why u think?Thanks and peace bruh.
@anapaulasoaresdequeirozsan69072 жыл бұрын
Muito boa brasil
@Cyberhacker37 жыл бұрын
Say , if a guy didn't want to go through the trouble of welding a pic rail on the barrel for the vertical foregrip to attach too , he could buy a "universal shotgun mount" on ebay for $9 ,,, www.ebay.com/itm/Universal-Single-rail-Shotgun-Barrel-Mount-3-Slots-Picatinny-Weaver-Aluminum-1-/332033332060?hash=item4d4eba935c:g:IJsAAOSwA3dYHacE ,,,,,and that fits barrels with an outer dia of 1.1 , and your barrel is 1 inch even , making it a perfect match.
@Fairfax_kit
7 жыл бұрын
The point was to do it with parts and material I had on hand in my metal pile at the workbench. It's not rail mounted, it's just directly welded, as there's no reason to ever remove it.
@corycas72956 жыл бұрын
Nice but waste of ak reciever
@Fairfax_kit
6 жыл бұрын
watch the entire video. It's not an AK receiver. It's a piece of scrap steel I shaped to look like an AK receiver.
Пікірлер: 29
and you still have all your fingers good job! glad you upgradsed that barel, the shotshell can produce 11500 psi presure for a standard 2 3/4 inch 12 ga shell
Brennan you should make a break barrel single shot 12 gauge based on the Orien flare pistol except made out of metal instead of plastic obviously
amazing the cartridge hit fireing pine
It looks really cool.
@Fairfax_kit
7 жыл бұрын
Thanks!
it look's pretty good ,but i have a question,it is actually acurate with a scope ,just asking because i'm building my own ;)
bad ass home made shotgun I've seen so far..
@Fairfax_kit
7 жыл бұрын
thank you!
Instead of pulling the spent shell out to reload, just flip the barrel and load it from the muzzle. The muzzle now becomes the breach. It will push the old shell out when you fire it, then repeat and load from the muzzle
hey bud.nice job..after watching lots of home builds im doin my own.will upload my build and test also.👍🔫👊👊
@Fairfax_kit
7 жыл бұрын
Badass, brother! Looking forward to it.
Why don;t you fire a shot place a shell in the end and turn it around and fire a shot to eject the spent round?
@Fairfax_kit
7 жыл бұрын
I actually did, but the footage of it got lost at some point :(
Hey would n e body answer question will the little basin bird shot stop intruder over 250lbs in your home? Or do I need 9 pellets federal TEACH ME PLZ! But nice job bro I couldn't get my slam 3/4 and 1" slide so freely guess need sanding machine if I want to make one
@sdmfbastard
5 жыл бұрын
Cory Cas grinder or find one that fits. bird should but buck shot will 100%...birdshot won't go through walls and hit other ppl though
@levilopez9264
5 жыл бұрын
Bird shot through a full choke will make hamburger out of anyone.
@giggergigger1
4 жыл бұрын
@@levilopez9264 i sincrely hope no one tries to make a ful l choke on a slam fire shottie!
@giggergigger1
4 жыл бұрын
form typical HD range of 5 yards, 400+ pellets of lead in the face area i think would stop any1 in their tracks
I bet it's heavy
👍
Hey brudda!It's the dude with the retained barrel slam (Las Vegas)dude I just uploaded a better vid of that slam fire.Tell me if this design holds eater or,it's gonna go flying out of my hands in about 4 to 5 pieces?Hehe!Seriously tell me why u think?Thanks and peace bruh.
Muito boa brasil
Say , if a guy didn't want to go through the trouble of welding a pic rail on the barrel for the vertical foregrip to attach too , he could buy a "universal shotgun mount" on ebay for $9 ,,, www.ebay.com/itm/Universal-Single-rail-Shotgun-Barrel-Mount-3-Slots-Picatinny-Weaver-Aluminum-1-/332033332060?hash=item4d4eba935c:g:IJsAAOSwA3dYHacE ,,,,,and that fits barrels with an outer dia of 1.1 , and your barrel is 1 inch even , making it a perfect match.
@Fairfax_kit
7 жыл бұрын
The point was to do it with parts and material I had on hand in my metal pile at the workbench. It's not rail mounted, it's just directly welded, as there's no reason to ever remove it.
Nice but waste of ak reciever
@Fairfax_kit
6 жыл бұрын
watch the entire video. It's not an AK receiver. It's a piece of scrap steel I shaped to look like an AK receiver.
Tre finger Brenner .....I know .