Am i the only one who watched till the end just to see if he was gonna try and put that thing on a real firearm?

@kurama670

Жыл бұрын

I was hoping he would at least put it on one of his home made air guns.

@halweiss8671

Жыл бұрын

Maybe it’s for a blowgun.

@timgasper8748

Жыл бұрын

No... I watched to the end as well. I guess we will all have to 'discover' what size PVC we need to start with. Didn't say or show if it was Schedule 40 or Schedule 80 PVC, but my guess is 40. Oh well, will take measurements myself and go from there. Nice to see just what was used for everything. Would loved to have seen how effective it is.

@m118lr

Жыл бұрын

…he wouldn’t ACTUALLY video ‘firing’ it…NOT ON Yt.

@kurama670

Жыл бұрын

@@halweiss8671 It's meant for an airgun. If you watch some of other vids on his channel, it shows him building his own airgun. The suppressor is designed specifically for that gun.

Anyone else waiting to see it blow up???

@arthicks2566

Ай бұрын

Yep waste of time.

@fidelalgarin3376

Ай бұрын

I was thinking the exact same thing. This thing will probably blow up.

The rebar hacksaw was the coolest part of the video😎🤘🏻

@tatakilocano

Жыл бұрын

It's a common hand tool here in the Philippines brother

@BubbaWake85

Жыл бұрын

Yep I was also impressed with that I'd like to make one for myself.

@BubbaWake85

Жыл бұрын

@@tatakilocano was that blade on that rebar hacksaw actually made out of ground down rebar? It didn't look like a normal hacksaw blade.

@tatakilocano

Жыл бұрын

Yes sir it is.

@jefro8179

Жыл бұрын

I thought the same thing when I saw the hacksaw😂😂

A moment of silence for all the people who thought this was intended for a real gun.

@tatakilocano

Жыл бұрын

👌

@tatakilocano

Жыл бұрын

Please visit and support my KZread channel. Thank you 😇

@kylewicklund5807

Жыл бұрын

Well if you know anything about firearms and temps, you should know this is good for about 10 shots max of a .22 at best. Can’t really call it a suppressor for anything else

@sustainablelife1st

Жыл бұрын

It's obviously for a vacuum cleaner! Which we can all appreciate. lol.

@petercarr3686

Жыл бұрын

Neither was a coke bottle

Im 57, and my father made them from a Briggs and Stratton lawn mower mufflers, basically the threading back then was the problem the muffler already came threaded, but, they worked better than the ones you can actually buy

@user-qr5vb3vm6e

20 күн бұрын

I used Volkswagen Beatles chrome tips.

I started playing paintball in 1986, back then we had to make all of our own accessories, I made silencers exactly like this. They worked well for paintball, I would never try them on a real firearm.

@deucedeuce1572

Жыл бұрын

Wouldn't hurt to try. (At-least you might get to see something blow up).

@riversideartglass

Жыл бұрын

yep, PVC & scotch brite pads

@michaelh3992

Жыл бұрын

Well that’s good because that’d be a felony.

@riversideartglass

Жыл бұрын

@@michaelh3992 FOR PAINTBALL? Sorry they would not even waste time on that one....

@SINESTERSERPENTSIXXX

4 ай бұрын

yea too much muzzle pressure thing will blow up

It's actually amazing with some effort how effectively can silence lots of stuff , just for short use probably can make fairly effective.

Disposable muffler, what a great idea !!! Rock Wool is great for sound reduction. Used in sound deadening applications.

Oil filters make great silencers...The longer the quieter...The female threaded inlet, will fit specific threaded nipples...You secure the nipple to your piece, I silver soldered mine, on an HP .22, extended barrel, after removing some of the sleeve, over the barrel...It's cast or pot metal, melts easy too, so be careful...Then just shoot the first round through for the end hole, and you have a replaceable silencer...Sounds like a cap gun...Longer filters even quieter...

I love foreign films. I can't wait to see the one where it melts. 🙂

@jimfields9491

Жыл бұрын

Maybe he’ll post a video of his eye doctor picking plastic outta his eyes lol.

@zer0deaths862

Жыл бұрын

Made plenty from old Water bottles, steel wool and duct tape, no melting. 🙂

@teddyrasputin3850

Жыл бұрын

@@zer0deaths862 interesting. What caliber was it on, how effective was it and how man rounds did you get out of it?

@garyjohnson801

Жыл бұрын

@@teddyrasputin3850 as big as the hole was it would have to be a 100 caliber . And with no baffle in front to slow down the gas it won't work because the hole is to big in the front

@brycedavis9177

9 ай бұрын

​@@garyjohnson801a 100 caliber...nice

I made one similar about a year ago for a cracked barrel .22 air rifle. It works damn good for squirrels, rabbits, and raccoons.

@nellyc1066

Жыл бұрын

The atf👀

@brooksstone2098

6 ай бұрын

​@nellyc1066 HE SAID HE PUT IT ON A AIRGUN THAT IS LEGAL

@charlesmeaux3954

5 ай бұрын

Why in the world are you shooting a rifle with a cracked barrel? Are you insane?

@RyanKuhnCPA

5 ай бұрын

Assume they meant a break barrel?

I like the concept of using whatever you have or can buy at the hardware store. The design is kind of like a glass pack muffler, doubt it would reduce the decibels much. I do like your hacksaw frame built from rebar.

@bctpcp9546

Жыл бұрын

Check this one i just made, even simpler but it works because of the smooth internals and the corresponding volume/area changes. Plus the simple action of a end of a (right kind of) bottle acting as a orifice plate.

@phetes810

Жыл бұрын

The blade is a ground down piece of rear also

@tatakilocano

Жыл бұрын

Please visit and support my KZread channel. Thank you😇

@GruntNorth

9 ай бұрын

Oil filter.

@jamesemick1452

9 ай бұрын

You would be surprised at how well they work ,I made one similar for a 10-22 it surprised me especially sub sonic ammo

Please visit and support my KZread channel guys😇 I would be grateful and I promise to improve all my future DIY project 😇 Thank you.

Beautiful work as usual. Works very well with high pressure gases like n-gas, etc. Absolutely love your design. Nice work. +1 a chamber inside a chamber with inlets.. for which the gases will go into as the projectile passes w/the high pressure gases directly behind it.. this works in physics. nice work. A+

Now I MUST make one of those... rebar hacksaw!!

I would like to hear it on a 22LR and how much difference it makes.

@albanym

Жыл бұрын

None!

@jonathanhudson4623

Жыл бұрын

It wouldn't make any real difference other than sending the blast sound down range like a blast forwarding device (BFD). As tight as the packing is between the ported tube and the outer chamber it wouldn't quite or "silence" any combustion fired device. You may as well tape a go-kart muffler to your muzzle if you want to go to jail for attempting to create a suppressor that has no reduction in sound.

@tatakilocano

Жыл бұрын

Please visit and support my KZread channel. Thank you😇

@deucedeuce1572

Жыл бұрын

@@jonathanhudson4623 If it has no reduction in sound, then it's not a suppressor. It's just an "extension".

@MHLivestreams

2 ай бұрын

Stacked baffles inside would work well. Make it as long as necessary.

Great idea but those materials will almost surely melt and/or catch fire at much above a .22lr when exposed to repeated, rapid firings (note there was no attempt to validate its capabilities in actual use). The most fragile suppressor material I've yet to see is aluminum; there's a valid reason.

@wildrangeringreen

Жыл бұрын

who cares if if only lasts 50 shots? it cost $15 lol

@jimmyjohnson7041

Жыл бұрын

Its not meant for rapid fire ........ and it wont work with a 22 lr either. The out put hole needs to be much smaller to hold back the gasses / noise. Nothing about this will work. I get greats results using plastic coke bottle with my 22 lr.

@miamislice3280

Жыл бұрын

That stuff doesnt easily catch fire when held in actual fire, I believe the issue will be like "barrel droop" after a couple hundred rounds by overheating.

@elementalist1984

11 ай бұрын

@@jimmyjohnson7041 kinda what I thought, it looks like a 1" pipe for the inner tube (the pipe with the holes drilled in it)

@dirtyscoundrel2013

9 ай бұрын

I liked how he stuffed nylon batting in there lol 😮

Tri bolt I remember now,the actual thread cap was steal, the spring loaded locking divots were brass,as the paint came off and we were able to see the yellow brass color anyway again very cool

I like the dual use of his tools.

How many shots can you fire before the plastic melts?

Muy bien hecho pero tienes que probarlo

Awesome. I don't know about using it as a silencer but I will make one but use it for a barrel shroud. Thank you.

For sweat kind of gun is that suppressor? The barrel looks too big

Apparently designed for use with a water pistol.

@ljprep6250

Ай бұрын

Wasn't that a blowgun? ;)

This design could be improved by making more room for more of the media(cotton or something synthetic?) and changing it to fine steel wool, which would last much longer.

@bakerrichardson6555

Жыл бұрын

You're right steel wool is the best packing material

@tatakilocano

Жыл бұрын

Please visit and support my KZread channel Thank you😇

@andrewcurry3332

Жыл бұрын

Fiberglass mat is used in some stuff

@louiswhite1445

Жыл бұрын

This design could be improved by un-designing it altogether.

@dennistate5953

10 ай бұрын

Steel wool burns, you know?

that's cool bro, i'm curious if you could add more baffle, or an end cap, i guess you could tape over the end and poke a hole,

@tatakilocano

Жыл бұрын

Please visit and support my KZread channel. Thank you😇

@dinadaughtry8993

Жыл бұрын

Put a baby bottle nipple on the end, great for air rifle

I did something like this (not as detailed as this one) and it worked for the first shot. I didn't secure the dampening layer (I used sponges) and on the 2nd shot it all went flying out. Told myself I'd try again but just got busy with other stuff. Also my module was twice a thick and probably a 15" long.

@Buffatestuff

9 ай бұрын

Please tell me you're not in the US.

@jamesjenkins9916

8 ай бұрын

Rock wool ! Handles the heat, and used in recording studios for sound deadening !

ATF : PVC PIPE IS A FIREARM

@sanharipasard4253

Жыл бұрын

🤣🤣🤣

@mikehenthorn1778

Жыл бұрын

send your dog away before doing this. save his life.

@dallasburnworth

Жыл бұрын

I think you may have meant "AFT" lol!

@skydivingcomrade1648

Жыл бұрын

ATF:But it isn't, therefore not protected under the 2A....but we only deal with firearms

@brandonpatterson5705

Жыл бұрын

@@dallasburnworth I think you meant AGT Americans Got Talent lol

It’ll work on a 22 caliber if you shoot bullets below about 1100 fps. The hardest part would be keeping the tube perfectly straight, in-line with the bullet travel. Keeping the bullet from making any contact with the inside tube, deflecting it. Perfect alignment could be a problem with an inner tube that small. Bullets over 1080 or 1100 fps you’d get a secondary boom coming from the bullet breaking the sound barrier.

@robgad2271

Жыл бұрын

Not really, because there is no isolation between the inlet and outlet to control the difference between escaping gas ahead of the sonic pop. This would only act like a glass pack muffler to some degree, not a suppressor. The reason an adapter from the barrel to a screw on oil filter actually works is the small hole shot through the end allows the expanding gas to stay trapped long enough to become neutral as the projectile goes through the small hole at the end. This open PVC contraption has little to no purpose.

@user-bd5md5cm2j

Жыл бұрын

What happens when it gets hot ? Dropping.....

@winnon992

Жыл бұрын

All the holes in the inner tube let the gasses out. Yes, same as a muffler. You know, The same fellow that invented the gun silencer invented the car muffler.

@robgad2271

Жыл бұрын

@@user-bd5md5cm2j PVC is good to 385 degrees before it deforms, the barrel will get hot faster than the PVC because it doesn't retain heat well. This is assuming that it's attached to a 22 Cal single shot rifle, and not a fully automatic of extreme firing capabilities.

@tatakilocano

Жыл бұрын

Please visit and support my KZread channel. Thank you😇

I've got a damn pellet gun in .177 cal and that sumbich is LOUD! Louder that all of my 22LR's for sure. Only 1 pump and CRACK... which kinda sucks LOL. I think it's about 1,300 FPS which is more that common 22LR but it's close in either case. I think THIS item would suit it very well and I may try something similar to this as I think it'll work fine for an air rifle. Nice little tutorial vid and like many others have stated, killer rebar hacksaw!

@elcompamartinez2647

3 ай бұрын

It worked perfect for my MARAUDER PCP pistol a lot less noise now

Looks like a silencer from a 1970's dirt bike

What air gun is this most effective on? The Benjamin bull pup?

@tatakilocano

Жыл бұрын

Please visit and support my KZread channel. Thank you😇

This guys going to put SilencerCo out of business.

I have a .22 MAG with threaded barrel. Maybe I'll throw something together like this and see if it makes it any quieter. Cool DIY!

@tatakilocano

Жыл бұрын

Please visit and support my KZread channel. Thank you😇

@stevecarter1273

Жыл бұрын

Need to load subsonic rounds. Kinda makes magnum pointless

@bakerrichardson6555

Жыл бұрын

I don't think it would take the pressure from the .22 mag.

@mtcoiner7994

Жыл бұрын

@@stevecarter1273 I should be able to buy subsonic rounds no? 🤔

@mtcoiner7994

Жыл бұрын

@@bakerrichardson6555 Only 1 way to find out 😉

galing ah..pwede na yan ipa order sa mga may kursunada budi..

But how effective is it?

I've seen hard metal silencers melt. So how well do you really think this will function?

@deucedeuce1572

Жыл бұрын

Don't think it's meant for a real firearm. Isn't even remotely the right size for any standard firearm.

Thee old bare foot clamp .. haven’t see that in years😊… but for real. Man your dope ✊🏽💯

Hell, empty water bottle and steel wool works real good,too. For a 22.

Super 👌

Just hit the play to see the airsoft toys. Is the a sprinkler?

Still think it would be interesting on let's say .22 caliber or so. I wonder how much it reduces the sound. Great build though.

@strattuner

Жыл бұрын

put a pepsi bottle plastic over the barrel it knocks down the sound 60 percent,i live in the country and have an old lady across the street,that can't hear me snuffing coyotes in the early morning ,so this device will probably work on a 22 lr,its what i shoot at the worthless dogs killing everyones chickens

@tatakilocano

Жыл бұрын

Please visit and support my KZread channel. Thank you😇

@elementalist1984

11 ай бұрын

The inner pipe's diameter is likely too big for it to be effective.

Back in the day made them out of 2 or 3 liter bottles would work for a couple shots they would make a gun with power quite

No, I did too. Was curious to see how quiet it was going to be. And to see I how it would handle the heat. 🤔

It is probably worth mentioning that civilian firearms are illegal where this dude lives. All they got over there are air guns, and most of them are home made. This is a tutorial on how to build a suppressor for such a gun. If you believe putting one of these on an actual firearm is a bad idea, you a correct. It is.

@Buffatestuff

9 ай бұрын

Just posting that you have built something like this in the US, even for an airsoft would be a bad idea.

@misterkaos.357

9 ай бұрын

@@Buffatestuff Beta cuck comment

I don't think that would hold pressure. But you can engrave your form 1 number with a pocket knife....

@tatakilocano

Жыл бұрын

Please visit and support my KZread channel. Thank you😇

A cap on the end drilled out over sized and a tire repair patch rubber cemented on the inside as a wipe would probably compliment the look completely

@tatakilocano

Жыл бұрын

Please visit and support my KZread channel. Thank you😇

Prescription pill bottles the kind that can snap together clear orange colored with holes drilled in center, insert scotch brite or steel wool wrapped around a pencil which is used as a guage for hole size electric tape and super glue them as a monocore baffle inserted into a maglite flash light body for the can.. tightly wrapping duct tape on the end of 22 barrel so the can fits really tight when put on and as long as you dont mag dump a ruger 10-22 all you really hear is the reciever ejecting the casing but if you rapidly empty your mag its only good for about 4-5 rounds then heats up and fudgea up alignment and you're monocore pill bottle baffle is done,, of course this is all hypothetical and ive nwver made a surppressor for a ruger 10-22

Thanks for the heads up...wont waste my time...

Show de bola.

Ang galing, salamat sa pagbahagi at may paggagatayahan ako

Really love the colour. At least you're getting views! And that's the main thing these days. All the best.

Might work on a .22. Right?

besides being illegal, would this not melt..?

Use stainless Brillo pads to take the heat away

Its a cute novelty item.

Yes I was waiting for the demo. Ive always felt that the hardest part to a silencer was getting the extended threaded barrel. Where do those come from?

@BIGBOP664

4 ай бұрын

I think the hardest part is finding a barrel thread to fit exactly Like it's supposed to I think plumbing pipes were built Completely different from gun barrels so people wouldn't do this Search high and low for the correct barrel thread and third they just don't make it you have to buy a gun barrel or produce it yourself

PVC gets really pliable when you ad heat, gonna act like an al dente noodle when it gets hot. We used to use a simple plumbing torch to make our own bends in electrical conduits

@tatakilocano

Жыл бұрын

It's intended for air rifle brother but if used on firearms definitely it will melt

Is that for a super soaker?

I bet 22 Lr would be ideal for something of those materials regardless that's pretty darn Cool

@buddyanam.tay.say.5802

Жыл бұрын

W wish he would have test fired it.

@benc6690

Жыл бұрын

airsoft maybe... it's not capped.

I'm digging his hack saw

Suppressor for what? A nerd blaster?

@ellenbrooks5028

2 ай бұрын

GREASE GUN

Won’t it melt on the first magazine?

Is ther a test video Wher it get used?

Great thank you!!!!!!

For airsoft right?

ok lets talk about the rebar hacksaw .that could make money.

Bro wont the silencer decrease power of Toy air gun?

I want to see it in action!

First off...ONLY way it wouldn't explode on first shot is if ONLY USED ON A .22LR. Then there's not going to be any appreciable sound reduction overall because it's open ended. Need a wipe or cap to trap the gasses or it'll simply be a redirection device. The sound may be attenuated from the shooter's perspective but that's only because it was redirected.

@19stump65

Жыл бұрын

That's good enough for the atf to go rogue on a dog n owners

@tatakilocano

Жыл бұрын

Please visit and support my KZread channel. Thank you😇

Magaling trabaho! This is how the NPA & HUCKS make silencers.

Yeah the plastic would melt upon firing on a real gun. I made mine out of aluminum. Works great, but I'm going for steel next. 👍🤠💯

Think this would be more effective on the end of an exhaust pipe than on a weapon.

Hell that Smurff, thing won't last 🔵🔵🔵🔵🟦🟦🟦

how does it attach to the gun

At close distance there is no crack of the faster long rifle bullet breaking the sound barrier.

Good idea for urban air guns if you can't find one for your rig.

Full auto rated?

I actually saw something similar built from plumbing hardware. It was entirely ineffective.

So does it work or not?

can you make a video for building a hacksaw

Did that filling MELT??

hey it might work for 2 shots then melt?

This item would best be used on a slam fire shotgun. Paint it Black and put it on the end. I think that might just be a nice little adjustment.

If your gun has a threaded barrel just use a oil filter

@InfantryGeek

Жыл бұрын

You have to have an adapter for the oil filter because any threaded barrel has a special reverse thread. Get caught with that adapter without a stamp and ATF will be knocking at your door.

@pierreaston7709

Жыл бұрын

@@InfantryGeek Fuck the ATF. Those adapters are extremely easy to get without having any members of the thin blue line gang at your door. And you do not legally have to have a stamp to possess and adapter. Nor should you get a stamp at any point. Tax stamps and CCWs are for collaborators. Dangerous Freedom > Comfort

@mc4906

Жыл бұрын

@@InfantryGeek ATF will knock on your door, and then Bubba will be knocking on your back door

@drickles37306

Жыл бұрын

@@InfantryGeek 1/2x28 is common in USA and not reverse threads. Overseas is reverse threads.

@tatakilocano

Жыл бұрын

Please visit and support my KZread channel. Thank you😇

Maybe with a .22 for a shot time. Anything else and it’s melted to slag but most likely the first shot sends it on a one way trip down range.

@tatakilocano

Жыл бұрын

Sorry for the misleading thumbnail but I made this for my DIY PVC Marble gun and not for a real firearm Please visit my channel ☺️ Thank you

The feds are drooling over this one lol😂😅

The barefoot and home made rebar hacksaw. I'm dead. 🤣

Lawn mower muffler ?

Am i the only one thinking this is gonna melt snd likely catch fire?

A oil filter fits on a threaded barrel it's easier

@michaelh3992

Жыл бұрын

And each one is a felony.

Paint ball can be fun.

For a 22. Rifle A 20oz mountain dew bottle filled with 00# steel wool and duct taped over the barrel would "probably" work really well, especially with Subs. Don't test this idea!! But remember it

@mikebunch3189

Жыл бұрын

steel wool would burn

@chawnslopoke2619

Жыл бұрын

@@mikebunch3189 yea eventually but it's not a big deal its disposable

@tatakilocano

Жыл бұрын

Please visit and support my KZread channel. Thank you😇

WHy do I get the feeling this would be like holding on to a big old firecracker saying watch this

Airsoft?

Thus would probably work for a paintball marker or a pellet rifle. Even a .22 would melt this.

ATF reading comments and saving addresses 😂

Works very well on my rubberband and potato guns . .001db drop. just can't let atf know about it.

Exactly just wanted to see knot heads

I wonder if it would even stand up to 22 subsonic pressures? Maybe just launch lead and plastic into your target...