Home Made shotgun! Pipe Plinker, episode 4...COMPLETE!
Ғылым және технология
A fun little project for myself, I have decided to make a BATFE legal, functioning single-shot shotgun for shooting clay pigeons. (maybe some watermelons, too) Finally, the gun's complete!
/ @garycoldiron5868 -Gary Coldiron's channel
Special thank To CrypticCRICKET Royal Nonesuch, and The Ammo Channel for inspiration.
I'm not a lawyer, do not rely on my word alone as legal authority if you plan to build something like this. I hold no responsibility for your actions or intentions.
Пікірлер: 58
The coolest selfmade shotgun I've ever seen.
@Fairfax_kit
8 жыл бұрын
Thank you very much, I'm proud of how it looks.
CS112 I love the dedication to the other youtuber.
I'd love to see you shooting this. Looks amazing :D
@Fairfax_kit
8 жыл бұрын
Eventually I'll do more shooting videos. There's one of the first test shots on my channel if you're interested.
what about the blow back area?Re-enforced or what?
Where did you find that soundtrack?
Damn all I want to see are the different types of fixing pin configurations. It's a nice build you have done. Good Job!
Badass
What is the size of the pipe
Looks pretty badasss for being a homemade pipe gun
I really like what you did there. What did you use for the foregrip. Thanks
I like that one I made a AR slam fire I tried to upload a picture of it but it won't let me
nice tidy lol shotty there mate, subbed
A GOOD IMPOVEMENT WOULD BE TO BE ABLE TO PUT THE SHELL FROM BOTH SIDES OT THE BAREL... THIS WAY IF THE FIRST SHELL STUCKS INTO THE BAREL , YOU CAN TURN IT THE OTHER WAY.. PUT THE SHEL IN .. AND THIS ONE WILL PUSH OUT THE STACKED SHELL WILE FIRING...AT THE SAME TIME
What is a scope for?
@Fairfax_kit
6 жыл бұрын
It's a cheap red dot sight, for aiming
@frankledford8096
4 жыл бұрын
What scope ?
Take off that front sight and you can use it also as a tonfa.
keep it up, bro
is that little thing on the end supposed to be a bayonet?
@Fairfax_kit
7 жыл бұрын
Bead sight. Works well actually.
@frankledford8096
4 жыл бұрын
Have you ever seen a bayonet , I really hope you were joking around.
If you eat takis your kitten wont bite your fingers anymore
B E A Youtiffull
that front sight got me laughing too hardto watch the rest
@Fairfax_kit
7 жыл бұрын
Mostly added as a joke, but it does it's job as a bead just fine.
@frankledford8096
4 жыл бұрын
You should had watched the rest it is a nice build.
USA !!!! Give em hell Boyz!!!!
Dude,you obviously have allot of experience with the Slam Fire so,tell me this? I have the standard black pipe (seem)bitch eater and slug 12g. SnW rounds ready to;"Rock and Roll"!Is this safe or,am I gonna be a statistic?I don't want to be on 1000 ways to die!I did sleeve the barrel,where the explosion happen's and upper end of the barrel so,it should be cool,right?
@Fairfax_kit
6 жыл бұрын
I'd only run birdshot through it if it's made of black pipe. Get a stronger material if you ant more brutal loads.
@dema8317
6 жыл бұрын
+Brennen Emm Thanks bruh.Good looking put !You're a good dude...Thanks.What kind of pipe can handle the force.
@Fairfax_kit
6 жыл бұрын
4130 chromoly tubing is what you want to use
@dema8317
6 жыл бұрын
+Brennen Emm same sizes and set up (nipple)as black pipe?
@Fairfax_kit
6 жыл бұрын
Same sizes, yes. however, you will have to weld in a plug as opposed to threading one on. The tubing does not come threaded. In one of my more recent videos, there's a diagram of the gun's insides you can see. kzread.info/dash/bejne/pomt0NawaMbXfMY.html here's a link to that video. I hope it's helpful.
plinker?
@Fairfax_kit
7 жыл бұрын
Plinking is a term for casual offhand shooting at targets like soda cans. This gun was built with small game hunting and plinking in mind. Since the bore diameter is over .50 , I named the series "pipe plinker" because I want it understood that it's a shotgun with legitimate sporting use and not considered a "destructive device."
that gun is made of aircraft tubing and not black hardware pipe and if it is black hardware pipe it was reamed out and not easy to build
@Fairfax_kit
3 жыл бұрын
do you listen to anything I said? you comment the same thing on every video. This gun uses black pipe.
if it's complete why are you not firing it on camera
What's the point in putting optics on a slam fire shotgun????
@Fairfax_kit
7 жыл бұрын
It's quicker to get on target, and better than eyeballing. It's worked fine for me.
@frankledford8096
4 жыл бұрын
Looks, and serves a purpose but no you don't need on a shot gun.
@necessaryevilzero1885
4 жыл бұрын
@@frankledford8096 I have one on my Hatsan DF12 semi auto 12g shotgun, it makes the gun superbly accurate with slugs and gives a fast accurate target acquisition like they do on any firearm.
Very cool AK/AR design!! stop by and check out mine. Happy shooting.
@Fairfax_kit
7 жыл бұрын
I just took a look at your channel, good stuff man.
looks good red ring was dreat ideal
Is that a AK lower 😂 What a waste
@Fairfax_kit
7 жыл бұрын
It's not.
@samsungphone-fw2hc
5 жыл бұрын
Are you serious lad ? Its styled that way clearly but come on man
@frankledford8096
4 жыл бұрын
I can't believe you ask such a question, and you can see it's not a lower, looks is all it's for.
51 people are commies
@Fairfax_kit
6 жыл бұрын
This guy gets it.
@justsomeasshole7388
6 жыл бұрын
Brennen Emm do you need to weld the firing pin?
@Fairfax_kit
6 жыл бұрын
This one is a 1/8 inch drill bit that's JB welded into a centered hole, It's held up fine.
@kevins1114
6 жыл бұрын
The count is up to 57 Bolsheviks now. Probably Antifa turds.
@nikkivasquez1344
3 жыл бұрын
Antifa is pro 2nd ammendment