Thank you so much for guiding through the installation. Very good job 👍

Just finished my installation. Thanks for this incredibly helpful video!

Thanks for the great information. I love my new Neotec 2. Now just waiting for the com unit!! Need to save a few bucks 😩 before I pull the trigger on it. Thanks again. Great job installing it.

@sportbiketrackgear

6 жыл бұрын

Thanks for watching and enjoy the Neotec 2! - Van

This video was excellent. It made the installation really easy. Thank you

Thank you for taking the time to go through the install, without which, I would have struggled I've no doubt.

@sportbiketrackgear

2 жыл бұрын

Happy to hear this was helpful. - Van

Great video. Just ran through to install my intercom. Brilliant and many thanks from the UK.

@sportbiketrackgear

4 жыл бұрын

You are welcome, happy to help out! - Van

Excellent instructions, especially the zoom-in makes it very easy to follow. Thanks a lot!

@sportbiketrackgear

4 жыл бұрын

You are welcome and thanks for watching! - Van

Thank you! There’s no way I could have done this on my own. This is my first motorcycle helmet and I have never removed any parts of it before. It’s also my first time installing something like this. Whew. An hour and a lot of rewinding because I’m new at it but your video was great.

@sportbiketrackgear

4 жыл бұрын

I am happy to hear this helped you get your install done. Thanks for watching! - Van

Great job, I just installed my SRL while watching your video. Thanks for the help, it made it much easier.

@sportbiketrackgear

6 жыл бұрын

You are welcome and thank you for watching! - Brian Van

@sportbiketrackgear

6 жыл бұрын

You are welcome and thank you for watching! - Brian Van

One of the best tutorials on this I’ve seen yet. Great video and instruction

You’re the GOAT Brian Van. Life saver. Made it easy work for me.

@sportbiketrackgear

5 жыл бұрын

Happy to help out! - Van

Excellent guide, had mine installed in minutes, clear concise instructions for us all.thank you

@sportbiketrackgear

3 жыл бұрын

You are welcome and thank you for watching! - Van

Thanks, this is the best installation video I've seen so far, very clear and concise, with good lighting making it very easy to see and follow along.

@sportbiketrackgear

6 ай бұрын

Happy to hear it was helpful and thank you for watching! - Van

Excellent!! Thank you in particular for being conscious of camera angles to show what you did!

@sportbiketrackgear

4 жыл бұрын

You are welcome and thanks for watching. - Van

Excellent method!! I follow and result was great.

Right on my man! Thank you for the detailed install.

@sportbiketrackgear

4 жыл бұрын

You're welcome, happy to help out! - Van

Thank you. Great video. Took all the mystery out of the picture instructions. Time for me to go install it now. :-)

@sportbiketrackgear

5 жыл бұрын

You are welcome and thanks for watching! - Van

A brilliant video much appreciated just waiting for my Neotec 2 and Sena Comms to arrive ....

@sportbiketrackgear

Жыл бұрын

Thanks for watching and enjoy the new helmet. - Van

Your video saved my bacon installing the SLR into my new Neotec 2. Bless you my Son. (-:

@sportbiketrackgear

4 жыл бұрын

No worries, happy to help out. - Van

very helpful video. It worked on the first try. thanks and greetings from switzerland, Thanks Rolf

@sportbiketrackgear

5 жыл бұрын

You are welcome and thank you for watching! - Van

Hey this video really helped me out! Enjoyed the video and thanks a lot

@sportbiketrackgear

4 жыл бұрын

You are welcome and thank you for watching! - Van

Very detailed and easy explanation! Thanks... now Im ready to instal my Sena system :)

@sportbiketrackgear

4 жыл бұрын

No worries, happy to help. - Van

Thank you for posting such a clear and concise explanation of the process.

@sportbiketrackgear

2 жыл бұрын

You are welcome and thank you for watching! - Van

Great video Brian.

@sportbiketrackgear

6 жыл бұрын

Thanks for watching! - Van

Excellent tutorial. Made the installation extremely easy. Thanks.

@sportbiketrackgear

4 жыл бұрын

Happy you found it helpful! - Van

Thanks very much from the uk. Was dreading this job a bit but all went well👍.

@sportbiketrackgear

5 жыл бұрын

You're welcome and thank you for watching! - Van

Gracias Muchachos! Big help for me to be able to get this system into my Neotech-2 lid. Good job 👍🏾

@sportbiketrackgear

2 жыл бұрын

Happy to help and thanks for watching! - Van

thx for the video. only because of this video i did buy the neotec 2 with SENA. If there would be no video like this, i would get a rage by installing this and use it without the SENA. Videos like this are gold! Thx very lot. The Quality of the SENA System is awesome, i just did a test and LOVE IT! Greets from Germany.

@sportbiketrackgear

6 жыл бұрын

You are welcome and thank you for watching! - Brian Van

@dant7465

5 жыл бұрын

So you have the Sena installed and using it. How does it sound? I've been very disappointed with the sound quality of my other Sena units and have change the speakers out with no improvement. No base hard to hear on Hyw and it's in a NeoTech

Best video on the install

Excellent demo

Perfect. It was way easier to do this using your video than following their pictures.

Great instruction Brian, installing on this cold MI winter day, took my time and got a near factory result...Thanks

@sportbiketrackgear

5 жыл бұрын

You are welcome and thanks for watching! - Van

@rotoehu9266

5 жыл бұрын

@Gary Ibershoff: do you know if the boom mic can be disconnected from its connection to the speaker (e.g. if mic fails and needs replacing) or is it hardwired to the speaker? Thanks.

@surfink808

2 жыл бұрын

@@rotoehu9266 can be removed and replaced

Terrific job on the video. Thanks very much!

@sportbiketrackgear

5 жыл бұрын

You are welcome and thanks for watching! - Van

great video sir!! made the install 100 times easier

@sportbiketrackgear

5 жыл бұрын

Thank you for watching! - Van

Really useful guide to fitting the comms unit. Thanks

@sportbiketrackgear

3 жыл бұрын

You are welcome, thanks for watching! - Van

Thanks for your time , i have a 3 day bike ride and i fitted it the night before cheers

@sportbiketrackgear

3 жыл бұрын

You are welcome, happy to hear it was helpful! - Van

Fantastic video. I opened the manual and felt like I'm either incompetent or the instructions assumed you had done this before.

Great installation instructions ! Thank you so much

@sportbiketrackgear

Жыл бұрын

You are welcome and thanks for watching! - Van

A really helpful video, thanks!

@sportbiketrackgear

6 жыл бұрын

You are welcome and thank you for watching! - Van

Very helpful and comprehensive - thank you

@sportbiketrackgear

Жыл бұрын

You are welcome and thank you for watching! - Van

Thank god for this install I could not get it done from the picture book that came with it!

@sportbiketrackgear

4 жыл бұрын

Their instructions are not the best. Happy this helped! - Van

Thanks for the detailed help. Appreciated!

@sportbiketrackgear

2 жыл бұрын

You are welcome, thanks for watching! - Van

Excellent overview

Thank you so much! I'd never done anything like this before and I managed this on my first run through. Nice job on the walkthrough video.

@sportbiketrackgear

6 жыл бұрын

You are welcome and thanks for watching! - Van

Good video. I'm gonna get the Sena for my Neotec 2.

@Reclaim68

5 жыл бұрын

Just installed it & all working. Yeah the instructions that come with it are pretty poor!

Thanks for posting this. Like you I found the pictures-only installation guide just about useless. Even with your excellent video, I had to stop and backtrack the install three times before everything fit and went back together seamlessly. It may be “made specifically” for the Neotec II but it’s still a fiddly process!

Thanks, great help on the install

@sportbiketrackgear

6 жыл бұрын

You are welcome and thank you for watching! - Van

Excellent video !

@sportbiketrackgear

2 жыл бұрын

Thank you for watching! - Van

Top shelf no question about it and you get what you pay for with Shoei helmets a must have on road trips or everyday use. Do you remember the days when we used hand signals....technology has spoiled us

@sportbiketrackgear

6 жыл бұрын

Funny when you think about it for sure. - Van

Awesome video

Excellent video. Thanks Well done

@sportbiketrackgear

4 жыл бұрын

You are welcome, happy to help out! - Van

Thsnk you very much, with your explanation very good

@sportbiketrackgear

4 жыл бұрын

You are welcome and thank you for watching! - Van

Thank you. The video was helpful. Now maybe you can make a video on how to remove the SRL for those of us that jumped the gun and installed it on a helmet that was the wrong fit ;)

fantastic tutorial!

@sportbiketrackgear

3 жыл бұрын

No worries thank you for watching! - Van

Excellent detail in steps to remove plastic parts. I hate plastic snap together parts. Push or pull the wrong way and they easily break.. Good detail here to show how to get it apart without breaking it.

@sportbiketrackgear

Жыл бұрын

Happy to hear it was helpful and thank you for watching! - Van

Very helpful, thanks a lot!

@sportbiketrackgear

3 жыл бұрын

You are welcome and thank you for watching! - Van

Nicely done, thank you.

@sportbiketrackgear

Жыл бұрын

You are welcome and thank you for watching! - Van

Thanks for the great video install. It really helped.

Totally helpful - might have to replace my SRL 01 unit. I will try fault reset first. Unit battery time down to only 4 hours.

@sportbiketrackgear

2 жыл бұрын

Sorry to hear you are having an issue with it. Hopefully the reset will sort it out for you. - Van

This video is the best!

@sportbiketrackgear

2 жыл бұрын

Thank you for watching! - Van

Thanks mate.

Excellent helmet and comms ..

Nice job very helpful do you do one for the set up as I am having issues a right pain in the check pads

Great Video!! The instructions that came with the Sena are just pictures and not very good at detailing out a correct installation. Thank you for taking the time to make this video.

@sportbiketrackgear

4 жыл бұрын

No worries, you're welcome! - Van

Great detail. Thx

@sportbiketrackgear

4 жыл бұрын

You are welcome and thanks for watching! - Van

I don't know about anyone else, but the wiring on the slide in side pieces were the only real issue with the install where I felt a little let down by the design. Everything else was absolutely instinctual. The problem being that the side flanges on the cheek pads need to be able to reach down quite deeply to hook into the pins, and you just lay quite thin wires right across it's path that need to be tucked away, and there really isn't any good location for them. The official Shoei install video simply warns to not have them in the way of the rear pin to allow reinstall of the cheek pad, but then rushes along and doesn't explain how. I think you did a great job here of at least highlighting the need to push the wires in and down, but I can't help feeling they simply made these wires too long. I mean.. I installed on a large shell helmet. Is the XXL really in need of 3 or 4 more inches or wire on each side? I don't think so. I imagine this issue on a small size helmet must be really quite a pain in the butt. If they'd designed some kind of channel or through hole on the cheek pad flange itself to allow the wires through or a place to run alongside rather than needing to be sandwiched right against the inside edge of the helmet while at the same time re-engaging those hooks.. It might have allowed for a simpler install. It looks great when it's all together, but I found myself feeling disappointed in that aspect of the install alone, and because of the cost, feel this could be an area of wire failure down the road. It's a bit sloppy for such an expensive product.

@missmexx2098

3 жыл бұрын

100% AGREE, Holy crap did that piss me off, took me 2 hours of trying to work it in

Fantastic video thank you 🙏🏼 . The instructions that came with it were crap and the video from Sena was too fast. Now I have it fitted perfectly

@sportbiketrackgear

5 жыл бұрын

No worries, thanks for watching! - Van

Very helpful. Just got the Neotec II and decided to try to fit my 10R in it. Nope. There was no way to make the mic work. I could jerry rig the speakers but had to have a mic. Ordered this unit. Sheesh...a $1000 helmet with the Sena. And to think my first helmet was a $100 Bell.

@sportbiketrackgear

4 жыл бұрын

Happy to help out! - Van

Cool! This will eliminate much trail and error.

@sportbiketrackgear

Жыл бұрын

Thank you for watching! - Van

Very nice instruction video. One will run into problems when just relying onm the couple of pictures in the Sena manual, Sena and Shoei should put a link on it. Thank you very much!

@sportbiketrackgear

2 жыл бұрын

You are welcome, happy to hear it was helpful. - Van

Great step by step , thanks. I am wondering if we can mount a Senac 10C pro on this helmet (Neotec II) thanks

Best video on youtube!!!

@sportbiketrackgear

4 жыл бұрын

Appreciate that! - Van

For anybody that doesn't want to deal with the SLR's cruddy audio quality, the Cardo Packtalk series are pretty dang easy to install on these helmets. Just put the interface a touch farther back then you normally would with the glue plate and everything else is cake. The JBL speakers on the Cardo system blow these speakers away if you care about it. Plus, the area where you would put the battery is now a nice little storage spot for whatever items you want to stash.

@sportbiketrackgear

Жыл бұрын

For sure you can still install most any of the aftermarket, non direct fit bluetooth devices in this helmet. - Van

Thanks for these instructions. The quick install guide was absolutely USELESS. Half the steps were missing (like removal of the cheek pads) hence the reason I arrived here to find someone actually showing me how to do it IRL. Your video guide was really clear and now got everything installed and routed beautifully! I presume the ear pads that are removed can be left out since the new earphones have a sponge attached?

@sportbiketrackgear

4 жыл бұрын

Yes, do not reinstall the ear pads you remove during the install. - Van

thank you !

@sportbiketrackgear

5 жыл бұрын

You are welcome and thank you for watching! - Van

Hi Super Video ... Would like to connect the SRL with an other helmet Nolan which has B5 N-com... It do not get that working ... do someone have an idea how ? Thank you

Thanks, buddy! You made that far more straightforward for me to do than it would have been had I tried to follow those cockamamie cartoon intstructions. 👍🤟

@sportbiketrackgear

2 жыл бұрын

You are welcome and thanks for watching! - Van

Great Video I just bought this helmet today and I will now buy this communicator to replace my Card Q3 I tried to mount the Q3 on this helmet and it just does not work. again thanks for the great video

@sportbiketrackgear

6 жыл бұрын

You are welcome and thank you for watching! - Brian Van

Hi bud. How do u compare this helmet compared to the Schubert C4. I see with the c4 it's much easier as the Mic and speakers are built in and the sena unit just slots at the rear. Do u know how the sound compares to this unit ? Thanks

@ian9963

6 жыл бұрын

Zunaid Kajee I’ve got the schuberth c4 and I think the sound should be the same as I believe they use the same speakers

🔥🔥🔥🔥🔥🔥🔥🔥

Have you guys ever done a video on the Healtech obd tool? Would really like to see that.

@sportbiketrackgear

6 жыл бұрын

Sorry we have not done that. Will look into getting one done in the future. - Van

Is the sena compatible with other sena ,,, ie sena smh 10 r

May I ask what motorcycle holder ring that is you're using? I can't find it for sale anywhere. Thanks!

@sportbiketrackgear

5 жыл бұрын

I have a couple service rings that have been given to me over the years from different brands. Not sure any of them actually sell them. If you dont have one and need to work on the helmet a bath towel folded up works pretty well. - Van

@ailsamitchell4586

5 жыл бұрын

Try looking on Amazon.

@SteveMarshallRestonVA

5 жыл бұрын

I bought several at a motorcycle show in Washington, D.C. I think they just call them Helmet Donuts.

@breaddrinker

3 жыл бұрын

They're rather ludicrously over priced and tend to be round rather than oval, so they don't fit well.. A gel neck cushion works really well, and is exactly the right dimensions, and a third of the cost. Sometimes less.

How do you answer the phone on that thing, i just don't see the bluetooth module

@sportbiketrackgear

3 жыл бұрын

All we did here was install the unit to help riders get that done. For more on features you can reach out to Sena support direct. - Van

Very helpful video..If you have the Neotec 1 (which i do) Sena make the 10U which is similar.

@sportbiketrackgear

6 жыл бұрын

Thank you for watching and thanks for sharing the info. - Brian Van

@JR-N-TX

6 жыл бұрын

And, apparently, the SRL is NOT compatible with the Neotec 1. I just unwrapped both to find --- they don't fit.

2 new Neotec Helmets. 1 new SRL, waiting for 2nd (availability issues til July,). 2 new freewires for 2017 HD Ultra. Can’t get SRL mic working via srl to freewire to boom to iPhone. Gotta go directly from srl to iPhone. Also can't get SRL to Prism camera working either. Sena tech support acknowledges this is an open issue. (I would have not made these purchases had I known...)

So where does the charger plug in? How do you update firmware? Does the microphone grab my glasses? And yes, I would have liked to have seen you pair this with a GPS and a phone.

@sportbiketrackgear

5 жыл бұрын

Dan, we are a very focused sportbike shop so I have not ridden with this helmet or used the communicator. I did this video because I felt the instructions with this Sena were not good enough. - Van

I wonder why shoei went this way with Sena and not the same way as schuberth c4? The Sena for the schuberth may not be as technical as the one for the shoei but I love the integration and to be able to swap battery’s out is a plus, having no microphone stuck in my mouth is also nice.

@MrJimtidd

6 жыл бұрын

Ian Robbins Schubert c4

Hi!does sena srl for neotec 2 fits on shoei gt air 2?thanks!

@sportbiketrackgear

4 жыл бұрын

Yes it will fit the GT Air 2 or the Neotec 2. - Van

@sportbilly13

4 жыл бұрын

Sportbike Track Gear thanks a lot!!

Great video! What is the difference between this SRL and the new SRL 2? I understand the SRL 2 fits both the GT Air 2 and the Neotec 2 (newly produced?). Just bought a new Neotec 2 & SRL, and heard the speakers on the SRL is not-so-good. A guy behind me in the lineup suggested to replace the speakers with Bose ones...but if the new one has better speakers I would return the SRL to get the SRL 2.

@sportbiketrackgear

5 жыл бұрын

The speakers looked the same to me, the difference is the kit comes with both mic options. - Van

It's not necessary to detach Center pad bonnet. I'm installing right now according to Sena instruction

Does it have to be with this helmet it can it be with any shoei helmet

@sportbiketrackgear

6 жыл бұрын

The communicator is only compatible with the Shoei Neotec II Helmet.

So I won't need a blowtorch and sledgehammer?

@sportbiketrackgear

4 жыл бұрын

Nope, just follow this. - Van

Thanks for the excellent instructions! I gotta say it was a little like watching soft porn the way you “teased” those wires in so gently and got the module to “dip in real easy” 😆😆😆

@mr.mrs.witowski29

4 жыл бұрын

That's just wrong

This fucking unit had me soaked in sweat swearing up and down for 2 hours before I got it to fit, now here's hoping I didn't fuck up any of the tiny ass wires

Mine has these weird left and right pieces that look like antennas. nothing is covered in the manual or in tutorial videos. Sena needs to step up their game

Does this communicator sound good?

@sportbiketrackgear

5 жыл бұрын

Sorry, I have not used this myself, we just decided to shoot an install video because we felt the instructions were a little weak. - Van

@Babyfasty

5 жыл бұрын

thanks for your feedback

Unbelievable.

@sportbiketrackgear

3 жыл бұрын

Thanks for watching! - Van

I wonder if anyone has already tried fitting a non SRL communicator onto this helmet? I'm not a fan of this SRL, Sena should include mesh network capabilities for this SRL.

After seeing a Video at the Shoei Factory and how Shoeis are hand made with a lot of quality control .. I think this wll be my next Helmet.. Too bad I already chose a Cardo Pak Talk slim.. As cardo has 100% Water proof resistance stands behind their Warranty better and is said to have better customer support. So it's all installed .. I know nothing about the available controls on this Sena.. Not mentioned in this "Install" Video .. I assume you simply plug your USB Charger cable into that back unit Obviously while still installed on the Helmet.. I suppose I will have serious issues trying to install my already paid for Pak Talk Slim Blue Tooth on this Helmet.. Then again switching from one Helmet to the other would be a time consuming hassle every time.. Also I don't even know if this Sena works with Voice commands or not???

@sportbiketrackgear

2 жыл бұрын

This video was only ever intended to showcase what it takes to install the unit and get a good clean result. - Van

@mikeskidmore6754

2 жыл бұрын

@@sportbiketrackgear I was going to visit your store early December via motorcycle.. Then it got cold and started snowing .. I had just added heated Grips . hand guards and the wiring for a heated vest.. Finally rode my snowmobile for the first time in several years last night. I just got a new CKX Mission Snowmobile Helmet with heated visor ..and breath duct venturis to vent your breath out the back .. It's a Cheap made in China Helmet with great features.. No Comparison to a Shoei. It is a full face but the shield is huge and flips out of the way .. You could eat a candy bar with the shield up .. I want to try it on the street in cold weather.. The Shoei you have to keep your face shield cracked open ..