first view first like #notificationsquad

@Saltyscales

5 жыл бұрын

For that I want to send you a FREE gift. Shoot me over your full name and shipping address. Joshua@saltyscales.com. Thanks for watching bud.

@kaih4889

5 жыл бұрын

ok, thanks so much!

@Adkguerrilla44

4 жыл бұрын

@@Saltyscales can you do a video or explain to me how to reassemble the click pin on the rotorhead of a lews speed spin mh200 ,i took it apart and the pin went flying outa the spring and i cant get it back the way its suppose to go,ive gotten it in there and put it back together but the bail wouldnt budge so im definitely stuck and cannot find a video to show me ANYWHERE online

@lennoxdakari8716

3 жыл бұрын

i know Im kind of randomly asking but do anyone know a good place to stream new tv shows online ?

@ezekielfranklin7387

3 жыл бұрын

@Lennox Dakari flixportal :)

Man you save me from going crazy, I could not work out how to get that bail spring worked out. Now that you have showed that the pin has to actually go into that little hole in the bail arm, both my reels are so smooth now. Great video, very clear and good instruction.

@lowen7214

3 ай бұрын

That was the same issue I was facing this morning. Good as new now!

Your video actually helped me and I don't even have your particular problem. I didn't know how my Bail trip strike was supposed to go and that 1 second part of your video just saved me from buying a new real. Thanks for posting helpful videos.

Man you are my hero 😊 I hade trouble to put back together the bail arm because it popped out and I was so close to give up and buy a new reel till I found your video and saved me time and money ⭐️Have no words to thank you 🙏 It’s back and work perfect! Thanks!

I learn so much from your tutorials. I would have never thought about repairing my own reels if it wasn't for you and your help. You really make it look easy.

Just saved my life with the bail arm man 😬🎉

You are a lifesaver. I couldn't figure out how to put the bail back on to save my life

The spring and click pin are probably the most helpful bits of instruction. I figured mine out before you got to it in your video. But I think that is going to be the trickiest part for the average person trying to repair or maintenance their reel.

Thanks so much the last part of the video saved me!!!

@Saltyscales

2 жыл бұрын

You're welcome!

Thank you, Thank you, Thank you!!!! This is the same as a Technium 4000fc and I was getting to the point of binning it! No other site comes close to matching your level of detail in re-assembling the bail arm.

Thanks from Taiwan, I am struggling with my alivio 6000 and will give it tomorrow a try....

@Saltyscales

4 жыл бұрын

You can do it!

Thank you! I took my Berkeley reel apart to grease and oil everything and couldn’t figure out how to get the bail back on, practically identical parts…..you stopped me from throwing the whole damn reel away out of frustration 😂

I am shocked how shimano reels can have this problem. I have had some 40 euro fishing reels form almost 20 years and they work perfectly. I was thinking of getting some shimano reels but after watching this video i changed my mind. Thank you for sharing this issue with us!

thank you so much you really helped me fix my reel and the overtightening tip helped a lot I was wondering why my bail had so much resistance all it needed was to be a little bit loosened!!! now it's snappy and nice like how it used to be thank you so much!

Nice video Joshua. I have cleaned/repaired my reels for years but they are so old now that getting parts is hit and miss. My newest reel is around 20 years old. But maintenance and care they have worked pretty good. I also have a couple from my grandfather that works "OK." Not as good as a new one but oh well! Take care and Be Well Buddy!!! 👍👍👍

So f**king glad you did this, my Sahara was in need of maintenance and that spring fell out. I was in shock that I was dumb enough to think I could fix it and loan behold KZread university helped me out. Thank you thank you thank you.

@Saltyscales

4 жыл бұрын

Glad to help, they can be tricky sometimes.

Thanks so much for the vid took apart a differnt rod n couldnt get that spring and pin back in for the bail to flip back n forth. On the reel i have had a slot i was puttin the pin in a didnt notice the single hole right next to it been trying to fix it for about a month and couldnt find anything on this finally got it thanks to your video

@Saltyscales

5 жыл бұрын

Yea, there aren't many videos on the topic. Glad you found it useful.

@kylerprigmore6628

4 жыл бұрын

Thanks for your vid spent days on a self help! Nothing ! they all skipped around that area now I no why! Took my vintage Shakespeare stigma apart an oops shot that silly arm an spring across my living room 5 times before I gave up! An 2days later just happen upon ya! I heard angles sing!!

Solid video Josh! Glad the Stradic is back up and running! ☺️

Thanks Joshua! Very detailed installation video. Helped greatly!

@Saltyscales

4 жыл бұрын

You're welcome

Thank you!! I was trying to figure this out for over an hour. Life saver

@Saltyscales

4 жыл бұрын

Glad to help

Your an absolute legend bro I was getting so frustrated with the whole process thank you

Thanks so much for this video mate. I took my Nasci apart for a clean and the click pin launched into outer space so I can definitely relate when you were like nooooooo hahaha. It's all fixed now and works a treat. Cheers

@Saltyscales

Жыл бұрын

Glad it helped

Thank you so kindly for this tutorial. Shimano should put "WARNING!! BEWARE!!" On the schematics paper for this part when you're about ready to open it lol!! Opened up pandoras box when I decided to see if their was dirt in that area. The spring came out the piece that went in it. Took a while to fix it. And it flew all over several times. Had to get my flash light out to search. Lost a piece and just took the piece off an old shimano reel I don't use anymore and presto!! Got it to work. A little resistance but it opens up and clicks which you want that so the bail will open and stay.

Thanks for the vid! I took my reel apart and couldn't put it back together, but you helped me do it in 5 minutes!

@Saltyscales

Жыл бұрын

Glad it helped!

Big thanks from Sweden! Saved my Vanquish and my day👍

Thanks for this vid, I unscrewed the bail arm apart and the spring/pin/sleeve (12:35) came out of the mechanism and I had no idea how to put back... classic tinkering problems

@Saltyscales

4 жыл бұрын

There are lots of little parts that is for sure. 👍

@johnbeaman9570

4 жыл бұрын

Still cant put mine back together. I'm just thinking of throwing it out and getting a new one

Thank you Joshua! I repair my shimano reel with your explanation. That's make my day!

@Saltyscales

3 жыл бұрын

Glad I could help!

Shocked Shimano sent that at no charge.. Reason I have mostly Penn Reels is you can get parts locally.. Great video and good teaching video.. Thanks for sharing.. Always your fan and subscriber..

So thanks to your video I was able to have a better understanding about what was going on with my Saragosa (very similar assembly) turns out I had the same issue, unfortunately I can't seem to find a new rotor for the reel so I cheated and super glued that screw in lol. We'll see how long it lasts. So far so good! 👍🏻

Ufff thankyuhh mannn... U jus saved Mee 😁 ❤️❤️❤️ love frm india

Thank u for the info. I could not for the life of me get that spring back. An finally ur trick got me to use my pole after 6 months which i also got another pole bc i was just fed up with it an wanted to "PISS SOMEONE OFF AN GO FISHIN!!" 😂SO AGAIN THANK YOU

I've fixed a reel with this problem buy drilling the hole out some and getting a piece of aluminum tubing that fits in the new hole and tapping the tube cut to fit and then super glue it in new hole

Thanks for the video just took my apartment cleaned out some sand I think all good to go now

@Saltyscales

2 жыл бұрын

Glad I could help

Hey! A Big THX from Germany! helped me alot, even if your stradic and our stradi is a little different. Keep on, good Work!

@Saltyscales

5 жыл бұрын

Thanks for the comment and glad to help.

Good video - wish I would have watched before I disassembled my Nasci! The click pin and spring fell out and got lost. Trying to source them from Shimano but the spring is discontinued! There's another site that has the parts but dang $25 shipping lol

Thank you so much dear brother . Now I fix my reel.

Great instructional. Helped me big time!

Thanks a LOT! I was struggling trying to put back mine, And was a totally messy!😅👍

Great video and helped me reassemble my Stradic bail. Thanks 👍

Thanks, you helped me fix my reel.

@Saltyscales

4 жыл бұрын

Great to hear!

Thank you very much. Most helpful

Saved the day! Thanks

Thank you mate this was great help.

You are a life saver!!! Like & subscribed.

Another great video as always!!!!

Haven’t had an problem YET, but it is good info to have

Great Video bro.. not good with small things..lol if it broke I just buy another. It was nice to see you guys fishing with Vick. Gitrdunn...lol

I love to rebuild and restore reels. I haven't worked on a Stradic before, it looks to be quite simple. I know some of the components you have to hold your mouth open and lick your nostrils to get the components back in the right place.lol. great tutorial! What was the work surface you were working on? Thanks for the hard work!

Great great job on this tutorial!

The side of the bail that you did in the video is good for me. The other side is the one I am having trouble with. Do you know what size screw is on the other side?

ya Joshua my ci4+ it had the same problem now I just got the new rotor n replace it and u safe lots money on it: by the way great video Joshua:)👍

Just what I needed

great info!! you saved me some time and money. really appreciated it.

@Saltyscales

3 жыл бұрын

No problem 👍

Thank you so much It worked at an okuma ceymar c55!!

@Saltyscales

4 жыл бұрын

You're welcome!

This was great. Thank you very much.

@Saltyscales

2 жыл бұрын

Glad you enjoyed it!

Life saver 🙏🏽🙏🏽

how do you fix the bail arm part that is higher up on the spool. My metal bail arm came out of the hole that it goes in and i cant figure out how to insert it and make it stay?

I have a stradic c5000xg broken bail arm.. can i fixed this? Or i need a replacement? Pls help mr

would the Saharac 3000 bail arm be assembled the same way as you did on the video?

Do you have arm cam spribg cover reel stela 3000 hg tahun 2012.Thanks anthonius stanpo from indonesia

Another Great Video, Thank you Sir......Love the Videos....What Stradic reel is that? if you don't mind... Love your 1911 Work mat....

Hi Joshua, could you please advise the size of the tool that you are using at 1:32 in the video to unscrew the bail arm. Thanks for sharing !!

I have TP SW5000XG and spool rice and fall for 1mm is that problem or normal for spinning reels? Reels is brand new

My Stradic is about 8 years old and I’ve taken it to be fixed a couple times. Soooo hopefully there is a fix now that will work ???? When casting the bail will close! Started when fairly new and had it fixed a couple times. Having to place a finger on it to keep it open gets old! Imagine seeing a nice school of fish and you need a dependable reel and the damn thing slams shut🤨

Thank you so much

Thanks so much!

Thanks 👍🙏

Very good, thanks you so much

@Saltyscales

Жыл бұрын

Our pleasure!

I’m about to finally purchase a Shimano Stradic so this might become good info to come back to in the future!!!

@Saltyscales

5 жыл бұрын

Absolutely, Shimano makes a great product but things happen sometimes.

thanks for the video. where did you order the parts from?

My bail snapped in half like the metal bar part can you replace that part?

@Saltyscales

3 жыл бұрын

You can yes, just call the manufacturer

How do you reset the bail on Pro Beros TYC 10000?

Ended up throwing my reel away cause I couldn't put the bail back on. I tried putting it on and the spring and pin shot all the way across the driveway. Not even going to attempt to find it

My spool stopper is stuck on any tips on how to get it free??

I wish I could do that on my fishing 13 can’t get bail on don’t understand it so now my reel is done for

Thank you soooooooooo much

How do you like the Lucas oil?

very helpful. thank you

i killed mine tryin to reassamble the damn thing. the pieces jumped out before i could get a good look at how they fit! the bale is bent to hell! i got a washer left over! damn it mannn!

Were you buy rotor for stradic dude??

Bees wax on the end of the screw driver will hold the small screw on

@Saltyscales

5 жыл бұрын

Nice tip!

Thanks a lot man!!!!!

Shimano quality has sure slipped in the past few years,but they still want a pretty price for them. I fixed that problem on one with a little JB Weld.Just fill in where the threads are,but not covering the hole.Wait for it to set,and use a smidge of blue Loctite on screw.Very little needed.Now when you get the bail assembly back together,just start the screw and make sure it is not cocked.With a little pressure turn it in snug.Too many over-tighten and that is why threads get pulled out. No ugga-duggas needed in reel repair.

. Wow so fantastis.

What type of screw is that at 3:38 ? What size?

How much sost a new rotor?

Similar to Okuma SV35 Stratus...spent hours trying to repair...then I watched this video...Wala

You just saved me $39

@Saltyscales

4 жыл бұрын

Glad to help 👍

Where does the sping go

08:09 Use Small Amount of Greese on Top Of The Screw Driver...🤟

I REMOVE CLICKPIN ITS NOT NEEDED.. DAIWA DONT HAVE THEM,,, just a sissly platic no use thing

Where does the spring go lol

give me please😁😁😁

Thats why i dont buy shimanos anymore.pieces of overpriced crap.

@Saltyscales

5 жыл бұрын

I definitely got my monies worth, I've had this reel for four years and caught hundreds of fish including tarpon and cobia. I would spend the money again.

@plantcitychuck2551

5 жыл бұрын

I got 3 and have had no luck with any of em.i ve had to replace bearings in all of em and an anti reverse in the c14+.and shimano wanted money for all of the parts.they were all barely a year old. i regularly clean and maintain my reels once a month so i was highly disappointed considering the money i spent for them.

thanks, saved the day!

@Saltyscales

5 жыл бұрын

Glad to help 👍