Thanks for the peek into these different models

Nice explanation of the different options.

That's what you call a smart lock ! have a great day

Great information, thanks for this video, cheers

The safes I still service I been changing out to the SecuRam stuff over the Amsec.

@hkssystemslocksafe2486

2 жыл бұрын

I like Amsec Esl 20s it's my second choice

@locksny

2 жыл бұрын

@@hkssystemslocksafe2486 The last couple years, I had problems with the dials going bad, that's why I been switching them out as I go.

Great info. Thank you for explaining this through. By the way what would one do if the lock body itself mal-functions since the codes are stored inside the lock body and not the keypad? and is there a redundancy inside this happens?

@hkssystemslocksafe2486

Жыл бұрын

Not really a second chance,like a malfunction in mechanical locks digital is no different-it comes down to the drill typically. There are types of bypasses for E locks but not always effective.

@kc7136

Жыл бұрын

@@hkssystemslocksafe2486 thank you again

I have an odd one for you. I'm an automotive locksmith so safes aren't my thing. In my previous home I had a floor safe that I installed. I don't want to say the brand but it was a good one and they were good to me. It was a C rated head with an S&G 6730. I sold the house and took the head with me. I contacted the manufacture for a new body for my new home. They changed some things up as the head was 20 years old so they wanted me to send the head in and they would make it fit on a new body. While there I asked them to put a Securam analog on which they did. For some reason and I don't remember why maybe to install a new battery with the head open I couldn't get the ring off to save my life. It would turn a little but stop. I contacted Securam and they walked me through a couple things but nada. They told me to do whatever it takes and they would send a new KP. I took a Dremel to it and they also wanted everything sent back for an autopsy. Have you ever run into that? They sent a new KP and everything has been fine since. I also registered with them and did a few of their courses.

@hkssystemslocksafe2486

Жыл бұрын

ANY e safe lock and floor safes are a bad idea in my book! Securam models never turn to remove just push upwards to pop off mounting posts?

@scotts4125

Жыл бұрын

@@hkssystemslocksafe2486 This was the ring to get to the battery. The new one works as it should. I still have the 6730 so I can always swap it back but so far liking the Securam until I have to fly you down to Fl to poke a hole in it. :) I also put one of their elocks on my gun closet.

I forgot I already have a custom set combo. The 11111 is another factory default, and I can change that as well....thanks

@user-DL8000

9 ай бұрын

Ok I got the super code changed...Thank you for your time

@user-DL8000

8 ай бұрын

This worked perfectly. I never set the master combo. Thanks a million for video

Could the Secure - Ram (as I pronounce it) Test Box be used to open someones Safe? Even though you call the "Secure-Ram" basic model the "Analog model", isn't it really digital in it's communication from the keypad to the lock body?

@hkssystemslocksafe2486

2 жыл бұрын

No it can't bypass if that's the question.only tests in a factory coded lock body According to Securam basic models it's analog signal being sent? The other models are digital?. I can't see a difference myself,but they make the product.

So I’m ditching my S&G Group 2’s after learning how manipulable they are. What stopped me getting digital was concern about hardware failure. I’m an EE, we do MTBF analysis…all electronics die eventually. Oddly I have more faith in simple mechanics. That said ranting aside if the Pro Logic keypad shits the bed but the inner lock is still alive and well. Can you bring a new keypad to the party if you know your passwords? It seems they need to be mated and to be mated you need the door open, panel off, to be able to press the reset button.

@scotts4125

Жыл бұрын

Everything is stored in the lock body so a new KP would work as long as the malfunction wasn't in the lock body.

I was wondering if this would work thank you for the great info! I have a quick question is it possible to buy a securam digital keypad alone without lock body? Basically I want to upgrade my keypad to a digital without wasting money on a lock body if possible. Take care buddy!!!

@hkssystemslocksafe2486

2 жыл бұрын

yes- keypads are sold separately as well as lock bodies and most components

How much is the digital keypad and can it be reset? I don't want liberty safe to have the back door access to my safe.

@hkssystemslocksafe2486

29 күн бұрын

They range from $200 up to $2k not sure what you have in place. FYI The codes are stored in lock body NOT keypad

hi, how reset the S&G TITANS TIME DELAY LOCK.. UNKNOWN NO. THANKS

@hkssystemslocksafe2486

Жыл бұрын

LBB or Pheonix ..call a pro!

Will this reset the password saved ? Especially for the digital one

@hkssystemslocksafe2486

8 ай бұрын

No, there are other tool models that will- but I don't show those.

What would cause it to stop locking ?

@hkssystemslocksafe2486

Жыл бұрын

Mechanical OR electronic failure. Try new batteries then change lock IF that don't work. You can put code in and pull cable before it relocks it will stay open until it's plugged back in with power.

@maddythesassy

Жыл бұрын

I have one that the keypad is frozen even with fresh battery. I cannot get it to do anything

Where can we get them with a reset device

@hkssystemslocksafe2486

8 ай бұрын

??? It ALL depends on the lock brand & model

Help my lock will not lock! I have changed the battery 2 times, the door will latch but I cannot get it to latch!! HELP

@hkssystemslocksafe2486

5 ай бұрын

Unless your local you'll need to contact a SAVTA member in your area, links in description

This digital lock opens when I press 1111111111. Do you have a remedy? Or should I buy new lock? Thanks

@hkssystemslocksafe2486

9 ай бұрын

111111 is a factory code..just change it?

@user-DL8000

9 ай бұрын

Thank you, very much...

hi,.. i have problem with securam, My pasword is Correct but why can not Open my Lock ( 3 beeps )

@hkssystemslocksafe2486

2 жыл бұрын

change batteries and retry! Use Duracell or Energizer. IF that doesn't work next step-change keypad then DRILLING would be needed most likely. Use the link to find someone close to you.

So, you are telling me that anyone who can get one of those testers can open any safe with a SecuRam lock?

@hkssystemslocksafe2486

9 ай бұрын

No, it only opens on factory codes, but switches front A to D systems or reverse.