I am a 40-year Yoke/Ballance Psiton design regulator diver in Seattle Washington. The water is cold 43F degrees, so I use a 7mm wetsuit. I am not Ice Diving in a lake.

My Sherwood Blizzard piston reg is a workhorse. It’s a closed system. Simple yet extraordinary.

@daveb3584

2 жыл бұрын

yes they are however people need to know the design and that the very small leak of air that you will see coming out of the rubber over pressure port is normal and part of the design of the regulator, over the course of a dive the amount of air is very very small,

Now I get it! Thanks for the simple, detailed explanation for both.

Great info as usual James. Answered some of my questions that haunted me for the last twenty years. Looking forward to the follow up video.

Great information! I learned a lot today because of this information. Appreciate James sharing his knowledge

Love this series of videos!!!

Great information mate. Hope you had wicked time in Bonaire

Nice explanation,thanks for the information

Having a hearty piston reg can be a great option for cold water regs. I've got a MK25EVO that's essentially bulletproof even in 34 degree water. They include the anti-freeze/drip tech that helps enable the water to drain off the first stage goes a long way.

@toriless

2 жыл бұрын

34? That is a summer temp in Seattle. 42 surface, 32 at 5 meters, Jul to Sep, not been in OW in Oct. Mostly Kelp, crabs and wrecks with seal and boat noises everywhere.

Hi, just wanted to say thanks for an informative and clear video. I've just started my BSAC course and it's in my nature to be very inquisitive about how stuff works, especially in this case where my life depends on it. Thanks again 👍👍

GREAT JOB JAMES. you took a basic question and made it simple. been servicing equipment for 30 years and you nailed it. it is up to what features people want and what is offered at their dive shop. they all will do the same thing within limits. Keep up the great work.

Very well said. I've used many of both configurations and found that a well maintained reg does exactly what it is supposed to do.

I bought my first regulator, an apeks DST with a XTX40 second stage 15 years ago, and I am still using it.

Good video!!!

Great explanation. In 30 years I have used both systems. I did ice dives with the old mk10 piston and they didn't freeze. Mk25 in a colder water (autumn) did but when my mate jumped in, he inflated his suit, bcd and was getting used to the cold on his face so heavy breathing. Expanding air cools temperature. That explains the freeze. All depends on how you use it I guess. The mk2 is a great 1st stage, but under 30m I preferred some more air flow, mk10 or mk25, mk17 and ds4(apeks) did function well there as well. I wouldnt hesitate diving simple shore dives in season in the Netherlands with an mk2. But if you want to invest and have the money, I would advise on the mk17. The mk25 is more expensive and doesnt freeze either when used and maintained well. Ask yourself what kind of dive you will be doing in the next 5 years. If you are really serious invest a little more. If you just go on holiday to the caribs get the mk2, they can service it there blindfolded in an hour is needed. All DC's have service kits for the mk2 around. Thats also worth something right.

My tusa rs790 is amazing I love it, had it almost 2 years now and went through one diaphragm so far annoying but a great reg

It's funny you mention Scubapro, my first regulator was a MK2 and my current reg is MK25

@toriless

2 жыл бұрын

Bottom to top

In my opinion the biggest change in first stage regulator design, in the last 50 years was the balanced diaphragm regulator external hose layout. Some now have the same hose layout as a balanced piston regulator.

Agreed, the best one is what's best for you. And I've had 2 of us at 40 metres breathing off one Apeks DST, as shown here, for a demo and it gave just as much air as we could take.

very good information, I do believe that this topic should be well covered in a Open water course and this should be a very good review for any diver with a Open water certification

Thanks James, you rock.

I bought a piston for the simplicity factor. I am probably going to do mostly warm water diving, I think 50 will be my limit for cold and that will not be very often at all. Bonne Terre mine being one of the few cool water dives that I would like to do. If I end up doing anything colder it will be in a dry suit with a full mask and setup for that and I will just rent it. The simplicity factor on the MK5 and MK20 that I have is their saving grace for me, I rebuilt them and can do it cheap. I know more than a few dozen will complain and they always do, but simply put do I really know and trust the guy and random shop "A" or random shop "B" or do I just walk in and trust them... I would rather trust myself to get a good nights sleep, not have other junk on my mind, and know I am putting my life in my hands. And same goes for rental equipment so honestly I doubt I will be renting any to do super cold water diving either. Regulators are regulators, as long as they work well with minimal issue/maintenance and do what you need it to do that is what you should use.

good job with this topic

great explain

Ugh, I thought I had this narrowed down to one regulator for purchasing. I was going to get the AquaLung LEG3ND Elite. It's a diaphragm first stage. But I'm liking the idea of the piston design because there are less parts. 🤔 Back to researching.

Thanks! Very clear! And what does "overmolded" design mean?

I love my XTX50's and Tek3's! They work great up here in Northern Michigan! I took my XTX50 to my ice diving class in March, and despite trying to make it free flow at the end of one of the dives, it wouldn't! Not to say it can't or won't at some point, but it didn't then. Off topic, but I see the Blacktip in the background. Just curious how you like it. A group of us up here purchased some in December/January and we all love them! It's always fun zooming past other divers at the local evening dives! Especially on those dives where it's close to a quarter mile swim out there!

@toriless

2 жыл бұрын

I use old fashioned Mares Quatros, so much pump your body rolls but you can fight any tide.

Love the videos! Where can I get a rebuild kit for a scuba pro mk2? I have one that I dive with but can only find repair kits for it on ebay. My last kit was older than me! Thanks

Hello from Greece, Firstly, i would like to mention that i am a fun of yours and enjoy your videos. Secondly, i am not sure if my question is stated correctly, but can you recommend a first stage regulator for nitrox and cold water?

I have and use both piston and diaphragm regulators. Both have their place. Regardless of the hype from the manufacturer's first stage regulator design has changed very little in 50 years. We still use the same basic first stage designs unbalanced piston, balanced diaphragm and balanced piston. So there must be a place for each or manufacturer's wouldn't still make all three.

Loving the dim lighting. Excellent comparison. Looking forward to balanced v. unbalanced.

@toriless

2 жыл бұрын

Mostly depends on how you dive, comfort vs feedback. If you dive properly the resistance of one is pointless but tech nuts love to push it to the edge. My wife has anxiety about the issue so I got her the Aqualung Legend. It is so smooth and it helps her relax. I know from the "out of air" exercise. I was using a rented reg. It was like going from a Corolla to an Avalon.

We dive cold water even in summer here in Germany. As soon as you dive below the thermocline it will get cold😅. The mk25 from Scubapro is very common in the tech Community over here, eye to eye with the Apex. I myself had never any issue even below 4 degree Celsius.

@DiversReady

Жыл бұрын

Thanks for sharing

This will probably generate some discussion. In my opinion winner's in the following categories. Initial cost > unbalanced piston. Cold / polluted water > balanced diaphragm. Hose layout > balanced piston and most of the newer balanced diaphragm. Deep Water > again balanced piston and balanced diaphragm. Cost to maintain in order from least to most costly (cost of parts for service) > unbalanced piston, balanced piston, balanced diaphragm.

Very helpful video! And you even gave it to us in the idiotic "inches" measurements for us Americans who use and inferior measurement system.

@toriless

2 жыл бұрын

2.54

What cold water temperature range would "cold-water performance" regulators be recommended for? Curious about the uper range? When is frost/ice a risk? Tha lnks

Do the diaphram 1st stage holes stay up on the thank,which way are the holes to face,up or down

Are piston regulators lighter? So for side mount would help with tank trim? Thanks.

As the best for me a mares Mr 22 well build you can use it as a hummer as well. Very easy to service even a child can do it reliable to me to 240 ft

Hey! I am sending Alec a link to this! He is untouchable, not really. I am sure he would admit he makes such simplifications too. It is more a product of the media than the person. Simplify but be complete too. It is why I post about a tenth what I could.

Which end is supposed to be up which is supposed to be down when i put the diapram on my tank

General question. I've just heard about a fisherman who survived for three days in an air pocket in a sunken boat at 100ft, 30m. Divers going to find the body, found him alive. How ling would the ascent need to be, assuming no pressure chamber on the rescue boat?

@toriless

2 жыл бұрын

The cold temperature is significant!!! If I go into a cool pool at first I can hold my breathe 30 seconds, after half an hour it is over 4 minutes and that was decades ago before I read a free diving manual. I would toss pennies and retrieve them. Also move SLOWLY. It is huge. It is almost like a human version of hibernation. Well, this is what happened to me, your results may vary.

@SimonAmazingClarke

2 жыл бұрын

@@toriless i used to be able to swim 2 lengths of a 25 yard / meter pool. As you say slow and steady was the way. I always thought that it was funny, the next time I went I struggled doing a width at first then over the session I got further and further.

Continue Winner's. Simplest to work on > unbalanced piston. DIN fitting available >. All Three.

@toriless

2 жыл бұрын

Yeah, but ORDER a DIN in the US and all you get is WHY!!!

@jeffconley6366

2 жыл бұрын

@@toriless That is slowly changing. From what I have seen, most divers that are going towards the technical side are switching to DIN. Recreational divers are slowly following. But, are the advantages of DIN worth replacing a perfectly good older regulator you already have if there are no DIN kits for it? My local dive shop carries almost exclusively DIN regulators.

Are diaphram for DIN and pistons for Yoke?

@nigelw.9043

Жыл бұрын

No, you can get piston and diaphragm regs in DIN or Yoke.

Yeah! If James says it then it must be true, I guess?

can i asking how about mk 15?

James, your comparison of mk2 and DST (yes, the Apeks 1st stage you showed is, indeed, called DST) is not necessarily fair. The DST is environmentally shielded version (unshielded version is called UST). On the other hand the Scubapro MK25 is environmentally proteced version (the t.i.s. kit) of a piston reg. Apeks UST and US4 are not protected and water will reach the inermediate pressure control spring and the diaphram so those are vulnerable for freezing, too. Therefore those models should not be used in colder than 10C water. The technology (diaphram vs piston) does not define if the reg can be used in cold water. I've had both and those have workedfine even during ice dives.

@Teampegleg

2 жыл бұрын

The TIS system isn't an environmental seal like you see on diaphragm regs. It is a coating that slows ice build up combined with plastic pieces that slow cold transfer from metal to metal parts. Scubapro did make an environmental seal for piston regs using the Spec boot, and Atomic still does.

@toriless

2 жыл бұрын

Perhaps you could explain shielded vs protected, that is where you lost me.

A decision between Scubapro MK2 and Apeks XTX50 is easy 😅

Why I switched from Atomic (piston) to Hog (Diaphragm). Cristolube is expensive. In order to use a Piston, in Cold or silty water it needs to be sealed. Atomic uses Cristolube (i do not know what everyone lese does) . This crap is stupid expensive, doubling or tripling the price of rebuilding the Regulator. A little tweaking of the second stage and the Hogs breathe as well as any regulator I have ever used and at much better price.

Always environmentally sealed or depends? #askdiversready

@dean_murray

2 жыл бұрын

No not all diaphragm regs are sealed. I have unsealed version of the apeks (called UST, Un-Sealed with Turret) and some poseidon regs, also diaphragm and not sealed

@crashlvmc

2 жыл бұрын

@@dean_murray I'm aware, it was an opinion question, not a fact question.

If you can .... look for last year’s models when new models are about to arrive$$$ Big Savings$$

@toriless

2 жыл бұрын

as usual, I wait for the trade ins.

Sorry, James, but you've mistaken XTX50 (which is the name of the 2nd stage) with the actual name of that first stage, which is DST.

@philipwilson1445

2 жыл бұрын

Sorry Alvaro, to be fair to James, Apek have used XTX for both first and second stages for years. My own identical reg has APEKS and XTX embossed on the first stage.

@Agranell

2 жыл бұрын

@@philipwilson1445 that has only happened (as far as I know) with the FST 1sr stages. But yeah, it's a common and uninportant mistake.

Shampoo is better. No, conditioner is better. Stop looking at me, swan!

@toriless

2 жыл бұрын

I have no idea what you mean but I use VERY dilute baby shampoo for mask defogger. I keep having to dilute it more. Anything else is waste of time and money. Thanks J&J.

@thetattooedpsycho

2 жыл бұрын

🤣🤣🤣🤣🤣

MK2 not balance 🙄