Been running one for about 12 or so years. I like to stream line as much as possible. Actually used it in a dive emergency last year in Galapagos. 100 feet down. Mola Ramsey. 1000 foot death. 1st stage on my brother in laws tank failed. Read 2500, then went to 0 on a breath. Testing confirmed this failure. Gota love the 3rd world. Well he came over with chipmunk cheeks and I gave him my prime. Went to alt. Latched on to each other as trained...17 years ago!!!. I dumped his air. Added some to my bc. Please note we were properly weighted, and we started for the surface. Dive master came screaming over, a most excellent young lady, and took over. I dumped air and went back to primary. So it sucks vs my high end primary, but it would have easily got us both back to the surface. I love and trust mine. Training and being with divers you know and trust is everything. SF KRH

@Lehmann108

3 жыл бұрын

Glad it went smoothly!

Few additional thoughts. 1. We have all see safe seconds dragging in sand, muck, etc.. Do you really want to hope it still works. 2. If a diver is in a panic, they may grap the second stage in your mouth. Because they know it works. 3. You don't have to play the flute. If you have the right shoulder dump. I actually prefer the button placement on the integrated inflators. This video has generated a huge amount of conversation. I think that is great.

"Buoyancy flute" 😂🤣😂🤣😂

@pyhoff

2 жыл бұрын

Jethro Tull

Nice video but it seems like most people disagree with it as I do. I've been driving with mine for 12 years and I routinely breathe out of it and it always breathes fine. I explained to my partner this is where my octavo is and they say okay. You can not compare the needs of a recreational diver with an instructor. If I were an instructor, I would have a traditional octo but I'm not an instructor.

I like your channel and respect your opinion, but I use a Scubapro air2. I am a SSI and PADI instructor. I don't use them while training OW students because I want to be kitted the same way as my students. I like mine but did make a few changes to it that addresses a few of your issues. 1. The air2 breathes better than the 095 octo and as well as the 195 octo. I have tested it many times even below 30 meters. I believe that the one you tried didn't breath well but my does. 2. I put a standard length yellow octo hose on my primary s620 routed under the arm. This gives me the length of octo and solves your second issue. I do believe this is a potential problem but easily addressed. 3. I use the shoulder dump when breathing from the air2. But sure it is a difference that should be practiced. I am side mount certified and have done some technical diving as well. Truth is I am more comfortable using this method than a long and short hose on a side mount set up. Not that the side mount is less safe, it isn't, just I am more practiced at this. 4. Yes, you need to brief those you dive with on your configuration. No way around it but you can say the same for the different types of integrated weight systems. But I have found it to be a good conversation starter and it leads into a helpful conversation with an ista-buddy. This often would not take place if there weren't differences between kits. I find people more interested and attentive. This leads to some great conversations. 5. Service issues? That is a stretch. Take it in like any other regulator. 6. the Air2 is 250 dollars. the R195 is 220 dollars. I will spend the 30 dollars. All in all, I like my air2. It travels well and saves me some weight and a hose. I use the standard octo when I am with students but kind of wish there where more dive centers that trained on these.

@xineisBR

3 жыл бұрын

Not that I don't believe you regarding the wob, but have you ever measured it? Work of breathing is a measurable thing and one needs to use the proper intermediate pressure as well.

@jaysake9549

3 жыл бұрын

@@xineisBR I have not measured it but it meets the EN 250A standard. At least the Air2 5th gen does. That is the only one that I have personal experience with. The intermediate pressure is matched with the scubapro mk25 first stage. I don't ever recommend using a first and second stage not made by the same manufacturer. I personally switch between my primary and secondary regulators at least one per dive for the practice and making sure it is working at depth. The Air2 breaths well at every depth I have tried it at. I even did a dive in Bali looking for Mola Mola where we stay below 30 meters as long as possible. I used it the entire dive just for a test. no issues and easy breathing. I will say that I have only used this setup in warm water. I believe that the Air2 is only rated to 10c (I could be wrong). Truth is, this is like so many other things, it is just a choice. If we start saying something shouldn't be used we should say why. I grew us in North Florida and side mount was all about making something that worked for the person who was using it. There are so many differences in side mount configurations that make this look down right standard.

I use an AirSource 2 most of the time for personal diving, came “free” with my first reg and bc and have not gone back to an octo. You raise good points, but allow me to counter. My primary is on a longer hose, also on an shared air ascent you should be firmly gripping your buddy, so by default they are up in your face. When ascending on shared air I use the dump valve to control buoyancy, and the inflator is in my mouth if I need to add air. It breaths well for me. In the setup you have the power inflator looks like it is an awkward position - mine sits relatively comfortably so I don’t have to turn away. The AirSource splits from the inflator hose for servicing. I come with a dive buddy, so we know how to use each other’s gear, but training another buddy on how the setup works is pretty trivial. For recreational travel in my opinion it is a great tool. That being said for any guiding or instruction environment the more standard your setup the better, and point taken on Tec Diving, in this environment having similar configurations is key to risk reduction.

@PanamaDiveAdventure

3 жыл бұрын

Paul, I totally agree with you.

@KB-gd6fc

3 жыл бұрын

Air sharing should be something that is standard across the board whether tech or rec. The best solution to air sharing is a configuration and method that works in all environments and at any level of diving. (the hogathian long hose configuration)

@pauldickerson892

3 жыл бұрын

K B - you are probably correct, and that is how I see most tec diver gear set up, but that is a question for dive agencies and equipment manufacturers to get together on and standardize the protocol and setup.

I guess🤷‍♂️. Anyone can pick apart problems with just about any gear. I started diving in 1984, with an Air2 integrated power inflator. And I dove that setup until 1997, with no problems that you spoke of. I have no idea exactly how many dives, but its in the thousands for sure. Had two out-of-air situations involving other divers. It just was NOT as awkward, complicated or confusing, as described in this video. What can I say, it just worked fine. I got out of diving until recently. In purchasing new equipment, I went with an octo instead, which Im still getting use to. Probably the most important thing in this video in regards to integrated power inflators, is that you do need to go over out-of-air situations with anyone you dive with that is unfamiliar with it.

James, I congratulate you on your videos. It is the first time that I do not agree with you. I don't know, as is the quality of the Atomic Air Source, I suppose that because of the brand it must be very good. I'm going to talk to you about what if I have known Scubapro's Air2 for more than 20 years, first I'm going to tell you where I have my Air2 working, nothing more and nothing less than in a farm where they grow fish and there I direct a staff of 40 divers, they dive 5 times a week with an average of 5 dives a day, the Air2 5th generation are of such high quality, they just don't fail. Maintenance is done the same as the Scubapro MK2 EVO / R195 once a year and the equipment works perfectly. You just have to train people with this type of equipment. At these times in times of pandemic, for the diving instructor it is an additional source of gas in case of various problems under water. I recommend in addition to the octopus to bring an Air2. You are right that they are not comfortable and it is one of the reasons why technical divers do not use it, in addition to the bad reputation that the Air Source by Aqualung had in the 80s and 90s, it was a really bad product. I respect your opinion and I really like your videos. Happy bubbles.

@davidmahony4421

3 жыл бұрын

Agree

@bass295pxl

3 жыл бұрын

Agreed

You are absolutely correct. I dove an Atomic SS1 for years and one day I looked around at the other advanced divers I looked up to and realized NONE of them were diving an air integrated inflator/octo. Shortly after that I was on a deep wreck dive in key West when my SS1 failed between dives. I went to the dive center and rather than spend $350 to $500 to replace it, I just bought a longer hose for my primary and a decent regulator and necklace. Much better now! Thanks for confirming what I learned not long ago. Love your videos by the way, always informative!

I'm a dive instructor who has been diving for 40+ years and I too love the integrated second stage for recreational diving. I think all the points in this video were great, and I do wear an octo when I teach and train my students on how to deal with an integrated regulator in OW class. I am the obnoxious buddy who does train his new buddy on the dive boat on how to share the primary in these cases. Thanks to this video, I don't feel bad about doing that anymore. I also get my integrated stage serviced every year, and that does add cost to getting my many regulators serviced. These are great videos and I will be watching more of them. One other thing to think about is the quality of the integrated regulator. I have tried several and find the SCUBA PRO and ATOMIC models to be reliable, but I had a very leaky Oceanic integrated regulator. Now that Huish seems to be buying everyone it is hard to say if any other companies make a decent version of this type of integrated inflator/regulator.

I have the air2 and agree with all of your issues. I used it from my advanced open water all the way to instructor. During my instructor course I added an octo, so now I have three regulators to service yearly. Planning on swapping it out for a lpi or bpi very soon

Used an AIR II for years , still do , I regularly breath off it towards the end of my dives just so it gets used , work of breathing can be tuned by a competent tech , never had any issues with buoyancy on ascent. or safety stop but you have to practice like anything else in diving , know your gear and how it functions ,

James. There are several ways, as you know, to deflate your BCD...Folks who dive the air integrated BCD’s, like the Hydros Pro, for example, vent air usually by pulling on the cord over the right shoulder, vs long arming it with the hose over your head. Much more efficient and quicker in my opinion. I see the issues you are presenting, the same way I see the fact that wrapping a hose around your neck, is a strangulation hazard. I think the key is to train, train, train, until it’s muscle reflex and it works naturally...

@mmizner

3 жыл бұрын

I don't like the hose around the neck personally. But strangulation is not a factor, sorry.

@grahambirch3715

3 жыл бұрын

How do you pull the chord over your right shoulder when the regulator on the other end of the chord is in your mouth? Take it out of your mouth? - OK, I get that, it's just training & that can be accomplished quite easily, but while it is out of your mouth, why not just raise it to dump?

@greggascoigne941

3 жыл бұрын

Graham Birch Key word ‘right’ shoulder! Not ‘left’.

@grahambirch3715

3 жыл бұрын

@@greggascoigne941 Good point! I'm a dork :)

@rippleguys

3 жыл бұрын

People who are commenting here seem completely ignorant of how the Hydros Pro works - first the wings on the bag have bungees - as you pull down on the right hand dump valve you can control your ascent very easily with the air2 in your mouth - second my son and I who is my PRIMARY buddy practice out of air situations so we know what to expect - and we both have long enough primary hoses so I can see him in front of me, and the hydros BCD hose is plenty long enough - we new exactly what we were buying and why.

Great video. I like watching different viewpoints especially on equipment like this. I trained 30+ years ago and always had a traditional octo secondary. My wife wanted to learn to dive so I decided to re-up my skills and do the open water course with her. Our dive center and the owner is solidly in the integrated power inflator camp and now that we're all but finished, it's all my wife knows. I did breathe off this exact integrated inflator. Even though it's been a while, I have to say I wasn't impressed with the airflow ease from it either. Thanks for giving me food for thought in regards to managing out of air scenarios with this secondary!

James you bring up a ton of useful points. I've had one for about a year and and have 70+ dives on it. Not the same octo you tested but a TUSA brand. Mine breaths just fine, never had an issue with it. In regards to out of air procedure, I have always discussed it with my dive buddy prior to jumping in the water. I love the convenience of having the second stage on my power inflate. I do not have an issue with the dumping valve since I'll use the one on my right shoulder and I require minimum adjustments to my buoyancy to begin with, so there is usually very little air in my BC.

I currently have an Air 2 setup on my BCD, and yes, it is a tad cumbersome, when I go to a backplate/wing setup I will certainly be dropping it in favor of a standard backup reg.

I find it interesting that you’re very ready and willing to tell us how dangerous these air integrated regulators are. You stated that you’re a technical fiber. I would say that most technical divers spend some time in caves as well. Now here’s my question for you; which is more dangerous and air, integrated power, inflator, or being an excess of 300 feet or fairly deep inside a cave system. Clearly technical/cave diving is far more dangerous, even though you guys are all “experienced”. If you compare the number of recreational divers to the number of technical divers, you find that the ratio is huge. Yes, unfortunately some recreational divers don’t make it back to the service. But that’s also true with text/cave divers. And the number of those who don’t make it are a far higher percentage than those that don’t make it as recreational Diver. You dive the way you wanna dive and I will dive the way I want to dive. It really is pilot in command. I have no interest in tech diving or cave diving. But I am a Course Director and have certified or sent to the instructor examination over 75 students and they’ve all passed on the first try. I train them for the real world and not to pass the exam. The exam is actually comparatively easy. One last thing you talked about a regulator that cost over $300. Well, the demo model power inflator you used was an Atomic brand. Atomic is not known for low priced equipment. They’re very well-made and you pay for it. Enjoy all your dives and be safe.

Mines came with my Bc but I still use an Octo for the same reason you mentioned, I have it in case my primary fails..better safe than sorry!!

Extremely helpful!

Love your videos James but I also love my Atomic SS1. I've been diving with it for almost 20 years. Hundreds of dives off the Oregon coast spearfishing along with hundreds of warm water dives. When I'm spearfishing in cold water with VERY poor visibility and VERY strong currents, it's important to me to have my backup reg easily accessible because I already have a lot of gear to keep track of. I have a goody bag full of crabs on one hip, a stringer with fish on my other hip, a speargun in my hand, light on my other etc. There is a huge workload underwater and knowing my backup reg is in the exact same place every dive and easy to get to is a big deal - for me. No way I'd want a secondary looped around my neck on these dives plus yet another hose (I dive a dry suit in cold water). For warm water diving, the SS1 just makes packing my gear easier for travel and diving a joy because of how simple the gear setup is. I realize tech divers hate them but they hate most of my gear anyway and turn their noses up at most of the stuff I do while spearfishing. I stopped worrying about what tech divers thought of me long ago (I've been diving since 1979). Is a long hose second better for sharing air? Absolutely. But, the advantages of my SS1 outweigh the disadvantages - for me. BTW, I test my SS1 on every dive because it's so easy to reach and you're right, it doesn't breath as good as my primary but that's a minor issue for me.

@1985goldie

Жыл бұрын

You spearfish on Scuba?

I set up with something similar. A second stage that attaches between the inflation hose and the stock BCD mouthpiece. The reason being because I carry a 19cu' pony tank with it's own long hose regulator that I attach to a standard position. Having three second stage hoses seemed to be a hose management problem. It could be argued the inflator second stage is unnecessary due to the pony tank, but it takes up little space for what it provides, (a second backup device). As far as breathing effort, that can be adjusted. Nobody wants a free flowing regulator, so manufacturers tend to make the factory setting a bit stiff.

I can see there can be differences between makes, but I've been using a AP valves autoair for 20 years and find it breathes as well as a standard reg at depths down to 35m, as long as you have a longer hose on your primary sharing should be straight forward

The Atomic SS1 actually breathes decently once it is tuned properly to match your first stage. I have been using an integrated inflator on and off for almost 30 years with no problems. When working as a dive master or instructor I do add a regular octo or carry a pony bottle as I am much more likely to deal with an out of air emergency but when I am not working it is nice to have only 2 hoses on my regulator.

@bowhunterxxx

3 жыл бұрын

I just wonder how many dives he has done with one? like you I have dived 100's of dives with one never had a problem if the hose is not long enough get a longer one, and as you said the SS1 breathes great and would be one of the most expensive. I have mainly used the Scubapro ones breathes 100 times better than the reg's I had in the late '70s

@SvenVoelk

2 жыл бұрын

yep i would agree, it needs to be tuned/ adjusted to the rig it is attached to. any second stage/ reg will perform like crap if not matched (in terms of tuning) to the first stage it is used with.

@adiands850

Жыл бұрын

Can I ask how the tuning is done? I am in the market to by a BPW setup and will be attaching a SS1 to it . I've never used the SS1 before. Thanks.

James - yep, I have the Air2. It came as a part of my BCD package and was my first big purchase after deciding diving was definitely for me. I trusted the dive shop I bought it from as they described the benefits of eliminating another hose, being streamlined, etc. That said, I do remember thinking to myself (but did not vocalize it during the purchase) that I did not train on this type of set-up, and is that a problem? It concerned me, but without really understanding why. Never worried about it after that - never even thought to practice an out of air situation with this set-up. Hmmmm. Naive. Fast forward 2 years - I am now diving with new dive buddies in local quarries. I am the only one in the group diving with an integrated power inflator. I am sure they noticed immediately, but it took me a minute to say, “Hey, I would be giving you my primary in an emergency.” And still, until today, not even thinking about using my dump valves to control ascent during this type of situation. My buddies and I never discussed it. We discussed other emergency scenarios, but not this one, not really. Opening up your video this morning gave me a good smack in the forehead. I was like, “What did he just say?!? What? Oh, man.... And then I started reading the comments. Wow! I learned SO MUCH from this video. So much good firsthand experiences relaying why each side feels the way they do. I’m going to practice with it now, obviously, and am also considering adding an Octo going forward. Another great video and discussion. Thank you.

I almost bought one of those when they came out. Hey, they were new and shiny, and it seemed like a good idea to get rid of a hose. I got somewhat put off by the price, which led me to think about it a bit deeper and came to the same conclusion you did ie a bad idea, and so I kept my regular octo. Now when a shiny new piece of gear or new method come up, I stop and think for a long time before I jump the gun.

Totally agree with everything you said, but what’s your opinion of instructors who have one of these as-well as an octo to deal with several out of air emergencies at the same time ?

Totally valid reason you put out there if you are pairing that with a donut BCD. My Scubapro Hydros Pro came with an Air 2 and in my opinion it works flawlessly for me with a long hose primary. I'm a SSI divemaster, so it is a common practice for us to donate our primary regulator to our out of air students or customers. So during the air sharing procedure with my long hose primary regulator donated and I myself breathing on my Air 2, I could dump the air in my BC easily with my right shoulder dump valve, so I don't even have to play the underwater 'flute' as how you ridicule in your video. Also, please take note that the corrugated inflation hose of Scubapro Hydros Pro with Air 2 inflator is slightly longer than their other variant Hydros Pro with standard power inflator, so there is nothing awkward with my head movement when I'm breathing my Air 2 inflator in my mouth. Also, I have never tried any other Air 2 imitation other than my own Air 2 which is originally designed and patented by Scubapro, the breathing effort is smooth and easy, the effort is almost identical with my Tecline Tec 2 2nd stage with the dial-a-breath knob fully dialed out. To wrap up, I believe Air 2 inflator is not for everyone and it is certainly not for every type of BC that is not original designed to use with it. I would highly suggest you to try out the Air 2 with Scubapro Hydros Pro + a long hose (at least 1m) primary regulator. Then, you would understand why I would say all your points you made in this video is not 100% valid about this type of infla-regulator. Personally, I highly against this to be retrofitted onto any BC that has no alternative shoulder dump and on a standard length inflator hose.

Thanks James. I have held the same opinion on Alternate Air Sources for years. It is a very unpopular opinion I have found, but I have stuck to my guns. I have always taught, keeping your primary and giving your Octopus on a long hose so I can keep control of the buddy breathing situation at "arms length". As an old lifeguard, and Asst. Instructor, I have first-hand knowledge of how fast things can go south. Keep up the good work. Really like your series.

I used an Atomic SS1 (as seen in Vid) for my first 250+ dives. As a standard recreational diver, i have no issues with this unit except price. It makes donning gear and jumping in easier. NOW....... When I started training as a DM, I quickly realized how worthless this device was. AS mentioned, you will run into Out-of-Air scenarios, and its not the pretty "Hi, I am out of Air" you do in training. It is a mad panic scared out of their mind, I dive on vacation only diver. Hence, I quickly, dumped the AI Octo.... Then I got smart and went LONG HOSE. Yes, I went long hose before becoming a Technical diver. Now, it is the only method I recommend. I teach an Octo, only to ensure my students are prepared for rental gear, but my students are trained on Long hose.

@mustanggun

3 жыл бұрын

I knew early that I was going Tech, so I switched to the long hose with a single take before Tech training just to get used to the long hose early. I also agree, long hose is the safest way to dive. Thx for your comments.

You have made such good points James! I have friends that just got new gear and got the air integrated octo and I bet they have no idea that in an out of air situation the other diver will get their primary and they will have to switch to their air integrated octo…

James, I just certified in FL for open water (wish I could have gotten you!) and the dive shop I used only trained with Air2s on the BCD. On two different occasions when practicing out of air drills with my instructor in the pool, I donated my primary and then went for the Air2 myself- only problem was that I accidentally grabbed my snorkel (which I was told was mandatory to wear the entire time for training, even though you don't see many on the dive boat!). Needless to say, I purged it by breathing out (which worked fine underwater with a snorkel) and when I went to inhale, I got ZERO air movement. Luckily, I had a snorkel which blocked off the top underwater, or else I would have inhaled a huge amount of water. Both times it freaked me out, and those two bad times in the pool really put a lot of nervousness in me when it came time to go to open water. The worst part was, I didn't even know what happened the first time, and almost didn't realize what happened after the second time. Once I realized why I was going for my Air2 and not getting ANY air, I was able to correct the issue by moving the snorkel way back and making sure to double check what I was grabbing. I feel like this is a huge issue for new divers as it was such an easy mistake for me to make twice. Air2 on the same side as the snorkel = more opportunity for mistakes, especially with a newbie like me.

Thank you for the video James. As a new diver look for my first BCD, I have seen these and was wandering how they good they worked. New stuff is very confusing to a new diver, not really knowing what’s up. I’ve been following you channel and have in joyed every video that I’ve seen. So keep up the good work, and I’ll keep watching.

@ramekd

3 жыл бұрын

Don't let this video dissuade you from trying air integrated power inflators. LOTS of divers of every skill level use them regularly, including instructor trainers. Read through the comments on this video and you'll see lots of other points of view. Myself, I don't agree with James on this topic.

@sarahann530

Жыл бұрын

They are not new . I got my first one 30 years ago . They work fine .

I definitely put a Scubapro Air 2 on right when it released thinking that it would be awesome to remove a line… lasted 3 dives with students and realized quickly that it wasn’t a good option for all of the reasons listed in the video. Great PSA!

All great points and I can't really argue. I use the Atomic with a slightly longer hose. My Zeagle BCD has 3 dump valves, one on the shoulder, so dumping air is not an issue. I have been in an out of air situation 6 months ago, I had no issues with donating my primary. I also switch from my primary at least once during a day of diving, just to stay comfortable with using the secondary.

James, I really enjoy your channel and I have learned a lot. I want to offer a couple alternative points/comments. I use an air integrated inflator for recreational diving only. Tech diving I do not. I also don't use two tanks or two regulators for recreational diving. (although I wish twinsets were readily available at recreational dive centers because I would dive this way because it would be safer) however at what point do we chose not to go diving. I have never had a problem with the air integrated system, with about 600 dives not a ton but enough to feel comfortable with it's reliability. In an emergency situation I believe it can work almost as well as a traditional alternate air source. The traditional alternate air source hose it not really long enough to separate from a panicked diver either and most divers are trained to connect arms in an out of air situation. I do agree that a long hose could be better but until we can standardize on that...... My air integrated power inflator easily detaches from bcd for annual service. I like the streamlined configuration. My bcd has a deflate cord on the right side that I can use for an ascent. I also don't think it's a good argument for not using it is because of training There are a lot of different gear configurations and there is no way to train for all or them. Divers can easily cover the use of the air integrated system during predive safety check. When I purchased mine it was actually less expensive when purchased with a bcd. Just some thoughts. Again I really enjoy your points of view and it definitely get me thinking I more about different situations.

@scmsean

3 жыл бұрын

Where I took my advanced and rescue they were really into these, which is why I got one. Almost everyone in the class had one. When I had to do the out of air as part of rescue, we did it with these. Lets be real. You do an out of air 1 or 2 times as part of open water. 1 or 2 times as part of rescue, then you never do it again. I don't think how you trained for it really matters. You are also taught to give the person your octo. If you give them your primary instead it is no different for them.

Great vid and greater discussion. The point about getting the BC serviced is spot on. I've had two BC failures due to corroded/warn parts. I favor streamlining gear, that is the only reason to have an integrated second/inflator. In the event of an emergency, you are correct, it will be clumsy. I think with a bit of practice ascending in a buddy breathing situ, entanglements will be eliminated. To your point, dive masters and instructors will have regular octo set-up for training and managing inexperienced divers.

@DiversReady

2 жыл бұрын

thanks for sharing.

Excellent argument. I am a commercial diver and have used the integrated for 5 years and like the streamlining. Your points are all valid. Because I dive with the same buddy exclusively and he has the same set up I will not be changing. But I shall take the servicing point and be re checking the breathing balance adjustment. We have used the gear in an out of air scenario. With our experience it was no problem, no panic involved, however, I would fully support your recommendations for most instabuddy and occaisional recreational divers. Thanks for the thought provoking video.

Thanks for the info, just got a bought a demo bcd from onine super store, and it had the same ss1 attached. I now have got one for sale if anybody wants one. Thanks James.

As a traveling diver it makes quite a difference for me not having the extra octo. I do agree that you need the extra step of responsibility when diving with one oof these (making sure your partner knows where to grab in an emergency, and getting it serviced) I have had no issues breathing on it as well. 71 rec dives this year of covid. No issues so far.

@scmsean

3 жыл бұрын

Wanting less lighter gear is the main reason I have it as well.

Good Video, very well explained👏👏👏,

I've worked at a dive shop and rebuilt a lot of air2s ,and have one on my old BCD. You're right the older ones are terrible breathers, and you're right they would not be ideal in an emergency. The gen 5 is easy breathing , but too easy you have freeflow problems . Plus , if you switch to fullface like I have you can't use them anyway.

I actually dove with someone where it failed in the on position at depth. Luckily she was well trained and detached the LPI hose and manually blew in the BCD to keep finish the dive.

When I bought my gear in 2003, the shop sort of vaguely recommended the Air2 and it seemed like a good idea at the time. Even when ScubaPro replaced my BC (warranty issue - I received a brand new BC) a few years back, I kept the Air2 (although, even then, I was starting to question). When I dive with new people, I make sure to explain that in an air emergency, I will be switching to the Air2 and they would be taking my primary. Fortunately, this has never happened. In recent years, I've come to change my mind for all the reasons you mention and was planning to add an octo to my setup for this season (I would have done it last season, but I didn't really do any diving during the pandemic). It looks like the plans are changing, though. I'm planning to start this season learning sidemount, so I'll have probably have a second stage to use as an octo when I'm diving backmount. I don't see a reason to remove the Air2.

Another great video and interesting to see some of the opposing comments. Personally, I've never used one so can't agree/disagree on how well they breathe. However, the main reasons I've never been drawn to them in the first place are highlighted in the video! It may work well for some but personally, I don't really see the benefit of using them to be honest. The standard octopus is much more universal, so no additional training / practice / guidance for dive buddies needed, it works well and provides more flexibility in emergency situations.

James I have the Atomic SS1 and I have to agree with you they are hard to breathe. My old shop had everyone dive the Atomic. Now I have had my SS1 and regs serviced. I have since switched to the Apeks 50 regs and I love them

I’m new to diving, started in 2013 and I have a ScubaPro air 2 and my Air 2 breathes better than my S600, to which I upgraded to the A700s. Never did have an issue with the air 2. I do tell my dive buddies that they will take my primary regulator and I will use the air 2. Primary reg does have a longer hose to accommodate the air share

My scuba proair2 is great and came with my BCD. Most of my dive guides use them. I’m glad you pointed out instructing people that your primary will be the share air which I have yet to do myself or hear from anyone. I’m blessed to dive with some of the best divers in the world which I would not include myself in that list but they all use the Proair2 that comes with the hydrospro. We do all use long main reg hoses though also. The instructors I know when they are working do use a dedicated second stage. I only know 1 technical diver and he uses a full face and dry suit so I don’t know any of his rig aside from that.

I dive Aqua Lung and I use the Aqua Lung Air Source 3 which is Aqua Lungs version. I am a professional diver and have been for 20 years. My Air source 3 actually breathes really nice. I do agree that it isn't for everyone but I do find my airsource 3 useful and I Love it. Don't change my friend, you give very insightful information on your videos!!

Hi James, love your videos, but this time I have to disagree with you. I have been using an ss1 for years now and mine breathes just fine and I've never had a problem with the insta buddy scenario. As far as having to turn my head to breathe from it that has never been an issue either. I guess it just comes down to personal preference. Keep the videos coming, I love most of your content that you provide.😉

@DannyB-cs9vx

3 жыл бұрын

Once in the water, I doubt his BCD would be hanging that low on his back. He could put on a longer BCD hose set if it does.

Love my Zeagle 50D ZX and integrated Octo. Never an issue with buddy sharing which I have had to do twice. The setup was too low on your back 4:42 in the video and made the hoses short. My hoses are not that short.

Good points made but there are adequate responses for each one. Working backwards I am a dive professional who has trained over 1500 divers and been diving for 47 years. I, my co-instructors and leadership and students all dive with the Scubapro Air2 (it actually breathes excellently if it has been properly adjusted AND Scubapro inflator hoses deliver way more gas than a standard inflator hose). What technical divers do is of little concern to most divers as they represent a minority of divers, and open water recreational divers should use what works for them. Attached to a jacket-style BCD with dump valves you will find that adjusting buoyancy while breathing on the safe second is easy. We have never had a single failure of any kind of the Air2, we service them as specified by the manufacturer since it is a life support device. And, of course, divers should train with what they use and conduct a proper buddy check as well as go over emergency procedures. That comes down to training and avoiding complacency. I like to tell my students that diving is deceptively easy and it can all go up in flames during an emergency, which is why we train for that. Finally a traditional safe second is meant to supply air to a second diver, not to serve as a backup in case of a primary regulator failure. When does a primary regulator fail (unless you are using urethane hoses)?

I really did not think this video would convince me to not use an IPI, I watched it to get some pointers or areas to pay attention to when using a new device. Some of the points on their own may be arguable, however when you look at the sum of all the issues he brings up and the number of ways the average diver is trained to respond to emergencies that you must alter, the benefit of using this does not outweigh the risk at all . Thank you for opening my eyes! I am purchasing a Scuba Pro Hydros X next month and one of the options was to get it with or without the IPI. Thanks to you I am sticking to my regular Octo system, saving money and most importantly diving safer for me and my buddies….great video.

@DiversReady

2 жыл бұрын

Thanks for watching, glad you made the best decision for yourself.

That is why I like your site so much. I have an air integrated power inflator on both of my jackets. But what I found out about this gear has been summed up in your video. So, I am using two first and two second stages as primary and auxiliary air source. Well, in Austria you are mostly a cold water diver. But I find comfort in the knowledge that I have a third airsource to fall back on. (That is, if the first stage the inflator draws its air is still working)

How do you feel about these new BCDs with the inflate/deflate buttons on the pocket? I can't remember which brand it is but there's no traditional LPI buttons. Had an emergency a couple weeks ago and couldn't find her inflator!

@kotro88

3 жыл бұрын

I have one. You're talking about the Aqualung i3. I have the Dimension i3 and love it. But you have to inform your buddy, of course.

Hi James, great vid as usual. Agree with all your points although I can see the arguments against for most of them. However for me point 3 was the clincher and quite frankly the only argument you need. In an emergency situation, faffing around with integrated alternate while your buddy is panicking on your primary just adds another element of risk that we can do without.

I am very new to diving. This is the only thing I have used. Haven't had an out of air emergency. Yet. (Knock on wood.😊) I see the problem with the ascent and not being able to deflate. I also use the top or bottom deflation values. I am going to look at doing something different in the future.

I agree 100%. I would also like to add that, in the event the inflator regulator has an issue while on a trip you have a problem. You can't just put a standard octopus on your first stage because you will also have to change your inflator. For those who did not believe the hassle of an out-of-air ascent with your buddy, try it. I sold one to a student that REALLY wanted it and gave my other one to one of my Divemasters.

I’ve used both set ups and You make valid points. Just some thoughts… Recreationally I do enjoy my Air 2. I Never had a problem breathing off it when I practice skills. I have no long secondary octo coming loose dragging on the reef or floating freely. My kit is streamlined with the air-2. If there is an emergency the air2 is always in the same place and I automatically reach for it. When my air 2 is in my mouth nobody, not even a panicked thrashing diver is going to easily pull that unit out of my mouth. Underwater seconds are precious during an emergency. Irregardless to opinions… Know your own gear and be comfortable with it.

How about oral/manual inflation? When I did my training I used a Cressi BCD with an “Cressi Direct System Inflator” on it, and I didn’t really get along with that power inflator (especially when wearing 5mm gloves). It felt “slippery” and hard to get a good grip on with the couture moulded controls, and the opening for oral inflation was tiny, yes I know there are other power inflators on the market. But I kind of like the control layout with more chunky buttons and a big opening for the potential need for oral/manual inflation. And then just see the safe second part as a “bonus feature”. Or is that just noob thinking?

They absolutely are terrible! I was doing a dive off of San Diego California last summer and my dive buddy had a 1st stage regulator malfunction and ended up running out of air. I had to donate my primary to him and breath off of that integrated power inflator and try to control my ascent from 80' what a nightmare! I immediately sold my Zeagle Ranger BCD and bought a backplate and wing and a new regulator set.

I have a SS1. Love it. I thought you posted a video of the dangers of an October vs integrated. Had it 7 years and serviced regularly.

I agree that you have to train with your buddy when you use an octo-inflator, but there are some arguments for the use of this type of safe second. Our local shop trains with this setup for open water training. The instructors feel that when there is a true out-of-air emergency that a panicky diver will try to get at your primary, "He wants what you've got." Second, grabbing the inflator is second nature since we do it all the time. In an OOA situation, muscle memory favors the routine and you would be more likely to find the safe second quickly. I note that in your demo, you were using a relatively short hose (16"?). My rig has a 20" hose which makes for more slack when the onto is in use. I have used both the Scubapro Air2 and the Aqualung Air3; both seemed to breathe just fine. Another minor point is that you can route the SPG under the right arm; easier for me to find as a righty. One other modification is to have a 40" hose on the primary with a 90 degree elbow so that once you've handed off, your buddy is less likely to be up in your stuff. I have used this configuration a fair amount and have always trained with my buddy to simulate an out-of-air situation. But there are 2 arguments against that you did not mention. The most important is that in that moment after you have handed off the primary, but before you have found and deployed the octo-inflator both you and your buddy have no source of breathing gas. While this is also true with a 7' primary and necklace octo, it seems like it would be less of an issue because you can quickly scoop up the octo no-handed. Also, if you are traveling and have a problem with the octo-inflator there may be problem getting it fixed. I carry a backup unit when I use this configuration. Thank you, James, for a thoughtful exploration of this controversial topic.

Have used the SS1 for 6+ years now and no issues. I have it serviced with my reg and computers every year. Hose on my Zeagle Stiletto is long enough to be serviceable/comfortable. I have used the SS1 for entire dives and in one emergency situation when my primary failed at 132' and had a safe, controlled ascent with deep stops and 3 minute safety stop. I have found the streamlining of gear and hoses to be worth the price. Also important to point out- have your computers tested every year on a flow bench to certify accuracy. Last year my workhorse oceanic (18 yrs old) was 12 feet off. That's a DCI accident waiting to happen. I will also mention that I routinely dive 100' or more and multiple dives a day, redundant computers on the same algorithm is helpful.

Couldn’t agree more. Love your vids.

Very good points, I have both

I’m so happy you did this video !!! Fantastic job!! I’m always telling people not to get those SS1 cause of most of the reasons you mentioned but I never am able to confidently put it into words like you did!! Thank you! You’re amazing!!

James, I have the exact same aqualand duplex as you. Do you still get it serviced with new o rings? I’ve been changing my own battery and have been told orings are no longer available through Citizen.

You bring up some very valid points James.

Spot on argument, don't like seeing these on my students on on the boat. Away too much peer pressure, get right in a lighting speed action plan. . Recall a certain UK company version jamming open on side a 20M wreck on a diver I was passing with 2 students doing a Advance Open water cert dive. Diver was fine once I got the hose disconnected and calmed the 2 divers down to end there dive and ascend.

I learned with an Integrated Power Inflator 25 years ago, and it seemed OK then. It was certainly nice to have one less piece of kit to worry about coming loose or getting tangled. It also worked fine when we were drilling out of air emergencies in the pool, but I do think you have some valid points about the possibility that they could be an inferior solution in a real emergency. I probably will stick to a full second stage.

@user-ix2rm1mr3h

8 ай бұрын

2nd stage?

I have used a Mares brand for years and like others have said once the tuning has been adjusted it breathes pretty decent. I have done away with mine for many of the reasons that you pointed out in the video. I am a Mares service tech and of all the regs I have serviced this is my absolute least favorite to work on. The other reason I went away from it is teaching purposes. I ended up with a regular octo to teach with and an octo inflator, the only reason I haven't done away with it is because how much it cost.

Hi James good points but the product does have its place. When the ScubaPro Air2 first came out octopuses were not common. In fact a lot of regs only had one or two LP take offs some only one. You are absolutely correct working dive professionals and tech divers should not use these. The original Scubapro Air 2 breathed like sh1t but so did many of the regulators at the time. The Air 2 I use now breathes well enough I use it in my personal regular dives with my buddies. We practice with it regularly. I have used one since 1984 never had an issue with it. On service it’s common sense it needs to serviced with your reg - is this not a training issue? Cheers Brian

@jeffconley6366

3 жыл бұрын

The use of an octopus or safe second stage was the standard in 1984. I was an instructor then. I have dove with an AIR II second generation and liked the setup. However, I dove with an extra long primary hose. The first generation was horrible and Scubapro quickly replaced it.

Hey James, another great video. Future subject..... servicing of BCD, What to look for and can you do it yourself?

@DiversReady

3 жыл бұрын

Coming up in the Dive Rite Gear Maintenance series!

@robertt9561

3 жыл бұрын

Great work, you are all over it!!

Hi James, would you be so kind and link me to the inflator valve shown in min.1:23? The one with aluminium in/deflate buttons. Thank You!!

Would you buy one for a last resort backup. Adding a 3rd option in the event your partner has an out of air event and your other regular has a failure. I know that this is unlikely, but what are your thoughts

@jimmymifsud1

3 жыл бұрын

That actually doesn’t sound too bad of an idea

@Yggdrasil42

3 жыл бұрын

I don't know. You're adding extra failure points as well. I'm sure these things can freeflow just like a regular 2nd stage.

I’m assuming you can oral inflate them? If it goes into free flow, your BCD is also out of action? (I don’t see how that’s less failure points). The only positive is perhaps less space, good for travel but hardly a significant space saver. If they were a good thing, everyone would be using them.

I'm a new diver and i bought a pre-owned BC with a Tusa AI power inflator and i was so confused as to what it was. The parts I was seeing looked like regulator. I reckoned, however, that the purpose was to breathe in the air in the BC itself haha. I certainly didn't shill out the big bucks, and i already bought an octo. I don't like how hefty and bulky it is, either. I wonder if i could trade it for a standard power inflator at my dive shop. Is not, it's a novelty that I've got on hand.

I have one, My dive buddy takes my primary gets behind me before ascending, it helps with the length issue. It still deflates bcd while using secondary

I have one on my rec gear for travel diving in Caribbean and such. When I take gear in for service this can be removed simply by unscrewing corrugated hose from BC. If I was to tech dive I would have much different setup.

I knew there would be a video here addressing this! I’m in the process of buying my first gear, and the sales person tried to sell me this in a package - I really didn’t want it because I worried that if something did go wrong, i may panic in an emergency situation. But they scoffed at me making me feel like I was being silly. Glad I didn’t cave and I did more research before buying.

@chris.ritchie

Жыл бұрын

That's really unfortunate to hear. Dive retailers should be concerned with your dive safety and comfort first, and money second. But unfortunately it doesn't always work that way. Best you can do is avoid recommending that shop to friends.

@scubadaddy3217

Жыл бұрын

Been diving for 25 years and I've had an SS1 for 15. It's super safe it's just as easy to hand someone your primary as an Octo and breathe through the SS1. I've never used it nor my octo in those 25 years, but they actually teach it in class now as so many people buy them instead of octos.

@philo2197

Жыл бұрын

I use the ss1 and love it. Don’t see an issue for rec diving… less hoses, more comfort.

I love my air2. I love eliminating a line and being more streamlined. Air2 breaths great actually. No issues with dumping air as I use my shoulder dump. A few points: 1. octo or air integrated you equally should be discussing in a proper buddy pre dive brief out of air emergency plans, gear etc. 2. only complaint is i wish the air2 was 1-2" longer. It's a valid point that it's awkward. But it's only going to be used for an ascent so not the worst. 3. I highly recommend every once in a while you switch to your air integrated power inflator to practice using it etc. If you're practiced you're prepared. I also use an air integrated Garmin MK2i. Eliminates another hose. Love it. If i was an instructor I'd use an octo too. Makes since as you're likely to encounter OOA situations more often. Having an integrated air inflator wouldn't be a bad idea for training familiarity too though.

Thanks I agree with you and would never use one of these but can you please tell how come alt air sources are so overly expensive?

@DiversReady

Жыл бұрын

If I knew, I'd tell you!

Maybe I’m crazy but could it be used as a tertiary reg if by some way you have a buddy that needs your primary and then your secondary fails?

I think all your points make sense. I however have one on my diving set up that my parents bought me for my 18th (3 years ago) if I had bought the set up myself I wouldn't have had it on there but it came with it so I just kept it. iv had to use it twice in an out of air situation both times on the same trip where i was buddied up with the child of a couple thag was breathing way to fast and wasted his air and never checked his tank pressure and ran out twice in the same day and I had to give him my primary and both times the situation ended ok.

i use oceanic air xs and it is good. i used it for 10yrs. my dive buddy who is an instructor now is also using it

I agree, but. I use an Air2 (common name). Brand is Oceanic. Reason. During a Shark feed dive, I had a diver that was not my buddy panic and grab my primary regulator, no hand signals, then swim hard to the surface dragging me along. I was unable to get hold of my own Octopus 2nd stage with yellow Hose. The Air2 floated in front of my face and I managed to get it into my mouth, it worked rather well. I was OK. Air2 is not replacement for an Octopus 2nd reg on a long yellow hose and I always use one. The BCD inflator hose is extra long and has a pull-on-it dump valve built-in. This is also the perfect 1st & 2nd stage reg, as I usually have it connected to pony tank. (Spare Air). Easy to find in hurry and I can do a whole dive using it. The other Diver lived but was found to be using his brothers dive certification Card!

Scuba pro air 2 setups have a pull feature on the corrugated hose to open a valve on your left shoulder for ascent . That plus the other two pull valves and button. But still as a very new diver who has used both set ups I see the advantages and now disadvantages

The producer clearly states that in case of emergency you should dump air by pulling your quick dump valve at the base of corrugated hose instead of the mouthpiece. Also which model did you test? Scubapro air 2 is decent for breathing. The only complain with integrated 2nd stage should be that they forfeit redundancy in favor of minimalism, meaning : inflator and octo will fail at the same time...

@mustanggun

3 жыл бұрын

I'll take redundancy everytime.

This must be a regional or dive shop thing. My LDS and trainers love these. I've got the SS1 and have no issues with it. When I did my OW, the rental BC I was provided had an Air2 on it. Just like anything else, it's about training and practice. Any OOA situation is awkward if you've never trained for it or practiced. I'm seeing more and more divers on dive boats with them. If I'm tech/wreck diving, it's a different story. These aren't meant for that type of diving.

@M3rl1n87

3 жыл бұрын

Yeah the entire staff at my LDS all uses them as do most of the folks that go on the LDS's trips. They don't have them on the rentals but they do go over the differences in the class, in this case the Mares Air Control and how differs from having an deadicated Octo. As James mention, i would agree that it is up to the diver with the Octo Integrated Power Inflator to let their buddy know it will be primary donate etc.... Also this something that should be called during the buddy check, like "hey, what is this and where is your octo" etc.. But that maybe too logical for some :)

@keithgrainger-customfitnes3272

2 жыл бұрын

why do you not use it for wreck diving ?

@briandhuff

2 жыл бұрын

@@keithgrainger-customfitnes3272 for me, it's less about the integrated power inflator/regulator and more about having equipment in a standard configuration that everyone I'm diving with will be familiar with. Generally speaking, when you start doing wreck diving, you're moving into more and more advance diving. I'm not talking about the purposefully sunk ship in 50' of water, that kind of Wreck diving is still Rec diving. I am talking about the advanced deco diving that you'll start doing once you get below 130' or are using multiple cylinders to stay down longer. In that kind of diving, I want to keep all my gear configured the same way everyone else is for safety reasons.

@keithgrainger-customfitnes3272

2 жыл бұрын

@@briandhuff gotcha. so safety reasons meaning; a way that everyone understands intuitively ?

@briandhuff

2 жыл бұрын

@@keithgrainger-customfitnes3272 pretty much. If I'm configured the same way as everyone else I'm diving with, then it's muscle memory for someone to find ABC piece of equipment on my body. The same principles are used in cave diving. You'll never see a cave diver use an integrated inflator in the place of a proper second stage octo. So everything has it's use/place. When I head down to the Caribbean to do some warm water princess diving with my wife, I want to be as light and simple as possible. The integrated power inflator is perfect for that. If all you plan on doing is diving in warm water, shallow, recreational diving, then these things are great.

My dive instructor only used his once. Two people from another dive school ran out of air simultaneously and they grabbed his primary and his octo

Agree with you James. Scuba Diving is already a complicated task, so there is no need to add more complicated things to the system.

I used one for an SS1 for a while. What I did not like about it was it was bulky hand kind of hung right in front of you, it requires a longer inflator hose than I like to use. If I were to try one again, I would buy second hand, they do not hold their value well at all and are not easy to sell.

I have mixed feelings about the one I purchased (AL Airsource 2) a few years ago. Does it work? Yes. Is it ideal? Well, that depends on the person. I bought mine when I had just over 70 dives, used mine for another ~80 dives, kept it as part of my kit as an instructor to give my students an opportunity to appreciate different configurations, then ultimately took it off my kit and it's sitting in the box in my closet. I've had to use this in an emergency and I agree, it is not pleasant switching from a high grade regulator to this. Was the ascent unpleasant? Ehh it could have been nicer, though I had no problem adjusting the air in my BCD. My biggest issue is that the BCD hose mine came with was too stiff, and it was difficult keeping the regulator in my mouth, and a shorter hose wouldn't let me look to the right. To your comment about telling insta-buddies about your setup, I think this is necessary for all divers to have this habit no matter their setups, and especially for a more tech diver setup and the diver that's getting rental gear from a shop. In both of these scenarios chances are your insta-buddy may not be familiar with your setup. Familiarize yourself with your rental gear and your buddy's gear to know how the regs work, where the releases are on your bcds, and go over contingency plans. There's usually plenty of time on the boat, or when you're getting ready for a shore dive. For the diver who dives ~10-50 per year, I would say this can be a piece of your kit, but try before you buy. Run a mock out of air scenario if you can where you and a buddy need to ascend using one of these. Some instructors teach you to Roman handshake and kick up and this regulator would be fine if that's how you know to safely ascend. Other instructors may have emphasized staying in perfect trim during your ascent in which case this may not be ideal without a longer than standard primary hose. I guess what my dragged out point is, if this regulator piques your interest go for it. Dive it every chance you have and as someone mentioned below, try to make adjustments so it can fit for you. I don't use this regulator anymore because I started diving sidemount primarily and I don't trust it in cold temps, I use a pair of xtx-50s.

My BIL uses this set up, dives quite frequently and is meticulous in his equipment maintenance. His failure points (Atomic) have been the plastic inflator buttons (large orange buttons). Two have broken on him and he swears there has been no more than normal use with no trauma to the mechanism. This takes out the device for essentially any use, losing both the inflator and the stage while sent in for repair. The good news is that the buttons can be fixed and replaced, but the last down time was over 3 weeks. Yes, stuff breaks, but I think the efficiencies gained with this configuration take a bigger hit when it does.

@DiversReady

2 жыл бұрын

Thanks for sharing.

James, some fair points. I’ve been diving with the SS1 stainless steel for a year+ (with over 145hrs including plenty of pool time to practice). It does not breath as nicely, certainly, as the BC2 by the same company. As you said, the dive is over anyway. Like all gear, there’s some amount of practice that goes in to making oneself comfortable. Most of the people I dive with use the SS1 so the group is familiar. Dove with a different buddy who was unfamiliar...you bet he got the full rundown for a possible OOA. Appreciate your points and will consider a different setup in the future. Thanks for the great content!

I saw I think a dive master who had a regular set up, primary and octopus, but had one of these octo/inflators as well

I’ve never breathed through any regulator that didn’t breathe like garbage outside of water.

I use the scuba pro air 2 and it’s great less is more with hoses etc. ... but agreed great point about servicing I’ve do really my reg but not my alternate air 2. on the bc ... keep up the good vids

@omegadivingacademy7937

3 жыл бұрын

Your service tech should require that you bring in your air 2 since it is part of the set you will breath on. I do not know why service techs do not insist since you do not leave the octo unserviced on the set where there is no AIR2. The "take in procedure" inspection for gear service should immediately identify the need to bring in the AIR2.

I like mine. My instructor told me that if someone runs out of air, often they will panic and will rip your primary from your mouth. I have had one air emergency while diving and that’s exactly what happened, I was within arms length of my buddy but they were slightly behind me and all of a sudden i was missing my reg and they were shoving into their mouth. Now, I just assume that’s going to happen and have no problem using my Air2. Now, you’re dead on about the breathing IMO. I don’t like how it breathes but in an out of air situation, my buddy and I are going to start toward the surface anyways so the small amount of time I’d be on it is fine. If I was doing something where I would be down longer, I would add an octo, but for standard rec diving, the integration is really nice. I do like the Tech diving method of putting a secondary on a bungee around my neck though and will likely add that to my kit soon. Will still keep the integrated because why not?! It will be a back up to a back up and honestly, I’m ok with that especially since it is so streamlined. As for servicing, I like to take my bcd and regs in yearly anyways so the integrated gets serviced just as much as my primary. I do hate the inflator flute you mention but my setup has a hose pull vent so I just pull on the inflator and vent that way if needed. Thanks for the vid!

Agree with you 100% its bringing more problems than sollutions and for that insane cost??? I underatand if its like 50bucks and a cheap alternative but its not.